100Base-T4 uses________line coding. A) NRZ B) 8B6T C) MLT-3 D) Manchester

100Base-T4 uses________line coding.
A)
NRZ
B)
8B6T
C)
MLT-3
D)
Manchester
by

1 Answer

Answer :

8B6T
by

Related questions

100Base-FX uses_________ block coding and ________ linecoding. A) 4B/5B; NRZ-I B) 8B/10B; NRZ C) 4B/5B; MLT-3 D) 8B/10B; NRZ

Description : 100Base-FX uses_________ block coding and ________ linecoding. A) 4B/5B; NRZ-I B) 8B/10B; NRZ C) 4B/5B; MLT-3 D) 8B/10B; NRZ

Last Answer : 4B/5B; NRZ-I

100Base-TX uses_________ block coding and ________ linecoding. A) 4B/5B; NRZ B) 8B/10B; NRZ C) 4B/5B; MLT-3 D) 8B/10B; NRZ

Description : 100Base-TX uses_________ block coding and ________ linecoding. A) 4B/5B; NRZ B) 8B/10B; NRZ C) 4B/5B; MLT-3 D) 8B/10B; NRZ

Last Answer : 4B/5B; MLT-3

1000Base-T uses________line coding. A) 4D-PAM5 B) 8B6TC) MLT-3 D) Manchester

Description : 1000Base-T uses________line coding. A) 4D-PAM5 B) 8B6T C) MLT-3 D) Manchester

Last Answer : 4D-PAM5

1000Base-SX, 1000Base-LX, and 1000Base-CX use _________ block coding and ________ line coding. A) 4B/5B; NRZ B) 8B/10B; NRZ C) 4B/5B; MLT-3 D) 8B/10B; NRZ

Description : 1000Base-SX, 1000Base-LX, and 1000Base-CX use _________ block coding and ________ line coding. A) 4B/5B; NRZ B) 8B/10B; NRZ C) 4B/5B; MLT-3 D) 8B/10B; NRZ

Last Answer : 8B/10B; NRZ

The transmission signal coding method of TI carrier is called a. Bipolar b. NRZ c. Manchester d. Binary

Description : The transmission signal coding method of TI carrier is called a. Bipolar b. NRZ c. Manchester d. Binary

Last Answer : Bipolar

________uses four pairsof voice-grade, or higher, twisted-pair cable. A) 100Base-TX B) 100Base-FX C) 100Base-T4 D) none of the above

Description : ________uses four pairsof voice-grade, or higher, twisted-pair cable. A) 100Base-TX B) 100Base-FX C) 100Base-T4 D) none of the above

Last Answer : 100Base-T4

_________uses two fiber-optic cables. A) 100Base-TX B) 100Base-FX C) 100Base-T4 D) none of the above

Description : _________uses two fiber-optic cables. A) 100Base-TX B) 100Base-FX C) 100Base-T4 D) none of the above

Last Answer : 100Base-FX

________ uses two pairsof twisted-pair cable. A) 100Base-TX B) 100Base-FXC) 100Base-T4 D) none of the above

Description : ________ uses two pairsof twisted-pair cable. A) 100Base-TX B) 100Base-FX C) 100Base-T4 D) none of the above

Last Answer : 100Base-TX

The transformer signal coding method for T1 carrier is A. Binary B. NRZ C. Manchester D. Bipolar

Description : The transformer signal coding method for T1 carrier is A. Binary B. NRZ C. Manchester D. Bipolar

Last Answer : D. Bipolar

Standard Ethernet (10-Mbps) uses_______ encoding A) NRZ B) AMI C) Manchester D) differential Manchester

Description : Standard Ethernet (10-Mbps) uses_______ encoding A) NRZ B) AMI C) Manchester D) differential Manchester

Last Answer : Manchester

The minimum bandwidth of Manchester and differential Manchester is ____that of NRZ. A) the sameas B) twice C) thrice D) none of the above

Description : The minimum bandwidth of Manchester and differential Manchester is ____that of NRZ. A) the sameas B) twice C) thrice D) none of the above

Last Answer : twice

The idea of RZ andthe ideaof NRZ-I are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Description : The idea of RZ andthe ideaof NRZ-I are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : differential Manchester

The idea of RZ andthe ideaof NRZ-L are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Description : The idea of RZ andthe ideaof NRZ-L are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : Manchester

Two common scramblingtechniques are ________. A) NRZ and RZ B) AMI and NRZ C) B8ZS and HDB3 D) Manchester and differential Manchester

Description : Two common scramblingtechniques are ________. A) NRZ and RZ B) AMI and NRZ C) B8ZS and HDB3 D) Manchester and differential Manchester

Last Answer : B8ZS and HDB3

Which encoding method uses alternating positive and negative values for1s? A) NRZ-I B) RZ C) Manchester D) AMI

Description : Which encoding method uses alternating positive and negative values for1s? A) NRZ-I B) RZ C) Manchester D) AMI

Last Answer : AMI

Which of the following encoding methods does not provide for synchronizationA)NRZ-LB)RZC)NRZ-ID)Manchester?

Description : Which of the following encoding methods does not provide for synchronization? A) NRZ-L B) RZ C) NRZ-I D) Manchester

Last Answer : NRZ-L

Unipolar, bipolar, and polar encoding are typesof _______ encoding. A) line B) block C) NRZ D) Manchester

Description : Unipolar, bipolar, and polar encoding are typesof _______ encoding. A) line B) block C) NRZ D) Manchester

Last Answer : line

How can the loss of timing occur in NRZ line coding?

Description : How can the loss of timing occur in NRZ line coding?

Last Answer : If long strings of 1s or 0s are present causing a lack of level transitions.

The ______ scheme uses three levels (+V, 0, and-V) andthree transition rules to move betweenthe levels. A) 4B5B B) 2B1Q C) MLT-3 D) none of the above

Description : The ______ scheme uses three levels (+V, 0, and-V) andthree transition rules to move betweenthe levels. A) 4B5B B) 2B1Q C) MLT-3 D) none of the above

Last Answer : MLT-3

The _____schemeuses data patterns of size 2 and encodes the 2-bit patterns as one signal element belonging to a four-level signal. A) 4B5B B) 2B1Q C) MLT-3 D) none of the above

Description : The _____schemeuses data patterns of size 2 and encodes the 2-bit patterns as one signal element belonging to a four-level signal. A) 4B5B B) 2B1Q C) MLT-3 D) none of the above

Last Answer : 2B1Q

In______, the changeor lackof change in the level of the voltagedetermines the value of the bit. A) NRZ-I B) NRZ-L C) both (a)and (b) D) neither (a) nor (b)

Description : In______, the changeor lackof change in the level of the voltagedetermines the value of the bit. A) NRZ-I B) NRZ-L C) both (a)and (b) D) neither (a) nor (b)

Last Answer : NRZ-I

In_____, the level of the voltagedetermines the valueof the bit. A) NRZ-I B) NRZ-L C) both (a) and (b) D) neither (a) nor (b)

Description : In_____, the level of the voltagedetermines the valueof the bit. A) NRZ-I B) NRZ-L C) both (a) and (b) D) neither (a) nor (b)

Last Answer : NRZ-L

is the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. a. 100 BASE-T b. 100 BASE-TX c. 100 BASE-T4 d. 100 BASE-T2

Description : is the predominant form of Fast Ethernet, and runs over two pairs of category 5 or above cable. a. 100 BASE-T b. 100 BASE-TX c. 100 BASE-T4 d. 100 BASE-T2

Last Answer : b. 100 BASE-TX

Which of the following are true in the context of Manchester Coding Signaling ?

Description : Which of the following are true in the context of Manchester Coding Signaling ?  (A) It suppresses the DC component  (B) It suppresses the high frequency component  (C) Pulses are unit symbol wide  (D) Symbol “1” is represented by positive pulse

Last Answer : Which of the following are true in the context of Manchester Coding Signaling ?  (A) It suppresses the DC component  (B) It suppresses the high frequency component  (C) Pulses are unit symbol wide  (D) Symbol “1” is represented by positive pulse

In Manchester anddifferential Manchester encoding, the transition at the middle of the bit is usedfor __________. A) bit transfer B) baud transfer C) synchronization D) none of the above

Description : In Manchester anddifferential Manchester encoding, the transition at the middle of the bit is usedfor __________. A) bit transfer B) baud transfer C) synchronization D) none of the above

Last Answer : synchronization

In___________ thereis alwaysa transition at the middle of the bit, but thebit values are determined at the beginningof the bit. If the nextbit is 0, there is a transition; if the next bit is 1, there is none. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Description : In___________ thereis alwaysa transition at the middle of the bit, but thebit values are determined at the beginningof the bit. If the nextbit is 0, there is a transition; if the next bit is 1, there is none. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : differential Manchester

In_______encoding, the duration of the bit is divided into twohalves. Thevoltage remains at one level during thefirst half and moves to the other level in the second half. The transition at the middle of the bit provides synchronization. A) Manchester B) differential ManchesteC) both (a) and (b) D) neither (a) nor (b)r

Description : In_______encoding, the duration of the bit is divided into twohalves. Thevoltage remains at one level during thefirst half and moves to the other level in the second half. The transition at the middle of the bit ... Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : both (a) and (b)

_____ encoding has a transition at the beginning of each 0 bit. A) RZ B) Manchester C) Differential Manchester D) All the above

Description : _____ encoding has a transition at the beginning of each 0 bit. A) RZ B) Manchester C) Differential Manchester D) All the above

Last Answer : Differential Manchester

_____ encoding has a transition at the middle of each bit. A) RZ B) Manchester C) Differential Manchester D) All the above

Description : _____ encoding has a transition at the middle of each bit. A) RZ B) Manchester C) Differential Manchester D) All the above

Last Answer : All the above

In Ethernet when Manchester encoding is used, the bit rate is: a. Half the baud rate. b. Twice the baud rate. c. Same as the baud rate. d. None of the above

Description : In Ethernet when Manchester encoding is used, the bit rate is: a. Half the baud rate. b. Twice the baud rate. c. Same as the baud rate. d. None of the above

Last Answer : a. Half the baud rate.

What is the maximum segment length of a 100Base-FX network?

Description : What is the maximum segment length of a 100Base-FX network?

Last Answer : The maximum segment length will be 412 meters. 

An important aspect of coding is ? Readability Productivity To use as small memory space as possible brevity

Description : An important aspect of coding is ? Readability Productivity To use as small memory space as possible brevity

Last Answer : Readability

Which is the limitation of high level language? a. Lower efficiency b. Machine dependence c. machine level coding d. None of above

Description : Which is the limitation of high level language? a. Lower efficiency b. Machine dependence c. machine level coding d. None of above

Last Answer : None of above

In block coding, ifn = 5, the maximum Hamming distance between two codewords is ________. A) 2 B) 3 C) 5 D) none of the above

Description : In block coding, ifn = 5, the maximum Hamming distance between two codewords is ________. A) 2 B) 3 C) 5 D) none of the above

Last Answer : 5

In block coding, if k =2 and n =3, we have _______ invalid codewords. A) 8 B) 4 C) 2 D) none of the above

Description : In block coding, if k =2 and n =3, we have _______ invalid codewords. A) 8 B) 4 C) 2 D) none of the above

Last Answer : 2

We can divide coding schemes intotwobroad categories: ________ and______coding. A) block; linear B) linear; nonlinear C) block; convolution D) none of the above

Description : We can divide coding schemes intotwobroad categories: ________ and______coding. A) block; linear B) linear; nonlinear C) block; convolution D) none of the above

Last Answer : block; convolution

In ________, we combine signals from different sources to fit into a larger bandwidth. A) spread spectrum B) line coding C) block coding D) none of the above

Description : In ________, we combine signals from different sources to fit into a larger bandwidth. A) spread spectrum B) line coding C) block coding D) none of the above

Last Answer : spread spectrum

______ provides synchronization without increasingthe number of bits. A) Scrambling B) Line coding C) Block coding D) None of the above

Description : ______ provides synchronization without increasingthe number of bits. A) Scrambling B) Line coding C) Block coding D) None of the above

Last Answer : Scrambling

_______ isnormally referred toas mB/nB coding; it replaceseach m-bit group with an n-bit group. A) Block coding B) Line coding C) Scrambling

Description : _______ isnormally referred toas mB/nB coding; it replaceseach m-bit group with an n-bit group. A) Block coding B) Line coding C) Scrambling

Last Answer : Block coding

_____ provides redundancy toensure synchronization and inherent errordetection. A) Block coding B) Line coding C) Scrambling D) None of the above

Description : _____ provides redundancy toensure synchronization and inherent errordetection. A) Block coding B) Line coding C) Scrambling D) None of the above

Last Answer : Block coding

________ is the process of converting digitaldata to adigital signal. A) Block coding B) Line coding C) Scrambling D) None of the above

Description : ________ is the process of converting digitaldata to adigital signal. A) Block coding B) Line coding C) Scrambling D) None of the above

Last Answer : Line coding

__________ conversion involves three techniques: line coding,block coding, and scrambling. A) Analog-to-digital B) Digital-to-analog C) Analog-to-analog D) Digital-to-digital

Description : __________ conversion involves three techniques: line coding,block coding, and scrambling. A) Analog-to-digital B) Digital-to-analog C) Analog-to-analog D) Digital-to-digital

Last Answer : Digital-to-digital

Block coding can help in _______at the receiver. A) Synchronization B) Error detection C) Attenuation D) (a) and (b)

Description : Block coding can help in _______at the receiver. A) Synchronization B) Error detection C) Attenuation D) (a) and (b)

Last Answer : (a) and (b)

The physical layer is responsible for _____ a) line coding b) channel coding c) modulation d) all of the mentioned

Description : The physical layer is responsible for _____ a) line coding b) channel coding c) modulation d) all of the mentioned

Last Answer : d) all of the mentioned

Coding schemes can be divided into two broad categories…………, ……A. character coding, integer coding B. hamming coding and block coding C. Hamming coding and convolution coding D. Block Coding and Convolution Coding.

Description : Coding schemes can be divided into two broad categories…………, …… A. character coding, integer coding B. hamming coding and block coding C. Hamming coding and convolution coding D. Block Coding and Convolution Coding.

Last Answer : D. Block Coding and Convolution Coding.

The dimensions of modulus of elasticity are a.MLT-2 b.107 dynes c.MLT-1 d.ML-2T-1 e.ML-1T-2

Description : The dimensions of modulus of elasticity are a.MLT-2 b.107 dynes c.MLT-1 d.ML-2T-1 e.ML-1T-2

Last Answer : e. ML-1T-2

The dimensions of gravitational constant G a.MLT-2 b.M-1L3T-2 c.Ellipsc d.ML2T-1 e.MLT-1

Description : The dimensions of gravitational constant G a.MLT-2 b.M-1L3T-2 c.Ellipsc d.ML2T-1 e.MLT-1

Last Answer : b. M-1L3T-2

Te dimensions of frequency are a.107 dynes b.MLT c.L-1 d.T-1 e.L-1T-1

Description : Te dimensions of frequency are a.107 dynes b.MLT c.L-1 d.T-1 e.L-1T-1

Last Answer : d. T-1

The dimension MLT–2 corresponds to (1) force (2) work done (3) acceleration (4) velocity

Description : The dimension MLT–2 corresponds to (1) force (2) work done (3) acceleration (4) velocity

Last Answer : force

In NRZ code, does the presence of a high-light level in the bit duration represent a binary 1 or a binary 0?

Description : In NRZ code, does the presence of a high-light level in the bit duration represent a binary 1 or a binary 0?

Last Answer : Binary 1.