The minimum bandwidth of Manchester and differential Manchester is ____that of NRZ. A) the sameas B) twice C) thrice D) none of the above

The minimum bandwidth of Manchester and differential Manchester is ____that of NRZ.
A)
the sameas
B)
twice
C)
thrice
D)
none of the above
by

1 Answer

Answer :

twice
by

Related questions

Standard Ethernet (10-Mbps) uses_______ encoding A) NRZ B) AMI C) Manchester D) differential Manchester

Description : Standard Ethernet (10-Mbps) uses_______ encoding A) NRZ B) AMI C) Manchester D) differential Manchester

Last Answer : Manchester

The idea of RZ andthe ideaof NRZ-I are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Description : The idea of RZ andthe ideaof NRZ-I are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : differential Manchester

The idea of RZ andthe ideaof NRZ-L are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Description : The idea of RZ andthe ideaof NRZ-L are combined into the ________ scheme. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : Manchester

Two common scramblingtechniques are ________. A) NRZ and RZ B) AMI and NRZ C) B8ZS and HDB3 D) Manchester and differential Manchester

Description : Two common scramblingtechniques are ________. A) NRZ and RZ B) AMI and NRZ C) B8ZS and HDB3 D) Manchester and differential Manchester

Last Answer : B8ZS and HDB3

The transmission signal coding method of TI carrier is called a. Bipolar b. NRZ c. Manchester d. Binary

Description : The transmission signal coding method of TI carrier is called a. Bipolar b. NRZ c. Manchester d. Binary

Last Answer : Bipolar

100Base-T4 uses________line coding. A) NRZ B) 8B6T C) MLT-3 D) Manchester

Description : 100Base-T4 uses________line coding. A) NRZ B) 8B6T C) MLT-3 D) Manchester

Last Answer : 8B6T

Which encoding method uses alternating positive and negative values for1s? A) NRZ-I B) RZ C) Manchester D) AMI

Description : Which encoding method uses alternating positive and negative values for1s? A) NRZ-I B) RZ C) Manchester D) AMI

Last Answer : AMI

Which of the following encoding methods does not provide for synchronizationA)NRZ-LB)RZC)NRZ-ID)Manchester?

Description : Which of the following encoding methods does not provide for synchronization? A) NRZ-L B) RZ C) NRZ-I D) Manchester

Last Answer : NRZ-L

Unipolar, bipolar, and polar encoding are typesof _______ encoding. A) line B) block C) NRZ D) Manchester

Description : Unipolar, bipolar, and polar encoding are typesof _______ encoding. A) line B) block C) NRZ D) Manchester

Last Answer : line

Given two sine waves A and B, if the frequency of A is twicethat of B, thenthe period of B is ________ thatof A. A) one-half B) twice C) the sameas D) indeterminate from

Description : Given two sine waves A and B, if the frequency of A is twicethat of B, thenthe period of B is ________ thatof A. A) one-half B) twice C) the sameas D) indeterminate from

Last Answer : twice

In___________ thereis alwaysa transition at the middle of the bit, but thebit values are determined at the beginningof the bit. If the nextbit is 0, there is a transition; if the next bit is 1, there is none. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Description : In___________ thereis alwaysa transition at the middle of the bit, but thebit values are determined at the beginningof the bit. If the nextbit is 0, there is a transition; if the next bit is 1, there is none. A) Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : differential Manchester

In_______encoding, the duration of the bit is divided into twohalves. Thevoltage remains at one level during thefirst half and moves to the other level in the second half. The transition at the middle of the bit provides synchronization. A) Manchester B) differential ManchesteC) both (a) and (b) D) neither (a) nor (b)r

Description : In_______encoding, the duration of the bit is divided into twohalves. Thevoltage remains at one level during thefirst half and moves to the other level in the second half. The transition at the middle of the bit ... Manchester B) differential Manchester C) both (a) and (b) D) neither (a) nor (b)

Last Answer : both (a) and (b)

_____ encoding has a transition at the beginning of each 0 bit. A) RZ B) Manchester C) Differential Manchester D) All the above

Description : _____ encoding has a transition at the beginning of each 0 bit. A) RZ B) Manchester C) Differential Manchester D) All the above

Last Answer : Differential Manchester

_____ encoding has a transition at the middle of each bit. A) RZ B) Manchester C) Differential Manchester D) All the above

Description : _____ encoding has a transition at the middle of each bit. A) RZ B) Manchester C) Differential Manchester D) All the above

Last Answer : All the above

In Ethernet when Manchester encoding is used, the bit rate is: a. Half the baud rate. b. Twice the baud rate. c. Same as the baud rate. d. None of the above

Description : In Ethernet when Manchester encoding is used, the bit rate is: a. Half the baud rate. b. Twice the baud rate. c. Same as the baud rate. d. None of the above

Last Answer : a. Half the baud rate.

The transformer signal coding method for T1 carrier is A. Binary B. NRZ C. Manchester D. Bipolar

Description : The transformer signal coding method for T1 carrier is A. Binary B. NRZ C. Manchester D. Bipolar

Last Answer : D. Bipolar

The vulnerable timefor CSMA is the ________propagationtime. A) the sameas B) two times C) three times D) none of the above

Description : The vulnerable timefor CSMA is the ________propagationtime. A) the sameas B) two times C) three times D) none of the above

Last Answer : the sameas

Inslotted ALOHA, the vulnerable time is ______ the frame transmissiontime. A) the sameas B) two times C) three times D) none of the above

Description : Inslotted ALOHA, the vulnerable time is ______ the frame transmissiontime. A) the sameas B) two times C) three times D) none of the above

Last Answer : the sameas

In pure ALOHA, the vulnerable time is ______the frame transmissiontime. A) the sameas B) two times C) three times D) none of the above

Description : In pure ALOHA, the vulnerable time is ______the frame transmissiontime. A) the sameas B) two times C) three times D) none of the above

Last Answer : two times

1000Base-SX, 1000Base-LX, and 1000Base-CX use _________ block coding and ________ line coding. A) 4B/5B; NRZ B) 8B/10B; NRZ C) 4B/5B; MLT-3 D) 8B/10B; NRZ

Description : 1000Base-SX, 1000Base-LX, and 1000Base-CX use _________ block coding and ________ line coding. A) 4B/5B; NRZ B) 8B/10B; NRZ C) 4B/5B; MLT-3 D) 8B/10B; NRZ

Last Answer : 8B/10B; NRZ

100Base-FX uses_________ block coding and ________ linecoding. A) 4B/5B; NRZ-I B) 8B/10B; NRZ C) 4B/5B; MLT-3 D) 8B/10B; NRZ

Description : 100Base-FX uses_________ block coding and ________ linecoding. A) 4B/5B; NRZ-I B) 8B/10B; NRZ C) 4B/5B; MLT-3 D) 8B/10B; NRZ

Last Answer : 4B/5B; NRZ-I

100Base-TX uses_________ block coding and ________ linecoding. A) 4B/5B; NRZ B) 8B/10B; NRZ C) 4B/5B; MLT-3 D) 8B/10B; NRZ

Description : 100Base-TX uses_________ block coding and ________ linecoding. A) 4B/5B; NRZ B) 8B/10B; NRZ C) 4B/5B; MLT-3 D) 8B/10B; NRZ

Last Answer : 4B/5B; MLT-3

In______, the changeor lackof change in the level of the voltagedetermines the value of the bit. A) NRZ-I B) NRZ-L C) both (a)and (b) D) neither (a) nor (b)

Description : In______, the changeor lackof change in the level of the voltagedetermines the value of the bit. A) NRZ-I B) NRZ-L C) both (a)and (b) D) neither (a) nor (b)

Last Answer : NRZ-I

In_____, the level of the voltagedetermines the valueof the bit. A) NRZ-I B) NRZ-L C) both (a) and (b) D) neither (a) nor (b)

Description : In_____, the level of the voltagedetermines the valueof the bit. A) NRZ-I B) NRZ-L C) both (a) and (b) D) neither (a) nor (b)

Last Answer : NRZ-L

The Nyquist theorem specifies the minimum samplingrate to be_______. A) equal to the lowest frequency of asignal B) equal to the highest frequency ofa signal C) twice thebandwidth of a signal D) twice thehighest frequencyof a signal

Description : The Nyquist theorem specifies the minimum samplingrate to be_______. A) equal to the lowest frequency of asignal B) equal to the highest frequency ofa signal C) twice thebandwidth of a signal D) twice thehighest frequencyof a signal

Last Answer : twice thehighest frequencyof a signal

1000Base-T uses________line coding. A) 4D-PAM5 B) 8B6TC) MLT-3 D) Manchester

Description : 1000Base-T uses________line coding. A) 4D-PAM5 B) 8B6T C) MLT-3 D) Manchester

Last Answer : 4D-PAM5

In Manchester anddifferential Manchester encoding, the transition at the middle of the bit is usedfor __________. A) bit transfer B) baud transfer C) synchronization D) none of the above

Description : In Manchester anddifferential Manchester encoding, the transition at the middle of the bit is usedfor __________. A) bit transfer B) baud transfer C) synchronization D) none of the above

Last Answer : synchronization

Twice the number of marbles with Aman exceeds thrice the number of marbles with Vinay by 12. Assume the number of marbles with Aman and Vinay as x and y respectively .Express the statement in the form of a linear equation in two variables. -Maths 9th

Description : Twice the number of marbles with Aman exceeds thrice the number of marbles with Vinay by 12. Assume the number of marbles with Aman and Vinay as x and y respectively .Express the statement in the form of a linear equation in two variables. -Maths 9th

Last Answer : answer:

Ninety coins are to be distributed among P,Q and R such that P gets twice as many coins as Q gets and Q gets thrice as many coins as R gets. Find the

Description : Ninety coins are to be distributed among P,Q and R such that P gets twice as many coins as Q gets and Q gets thrice as many coins as R gets. Find the

Last Answer : Ninety coins are to be distributed among P,Q and R such that P gets twice as many coins as Q gets and Q gets thrice ... R gets. A. 6 B. 3 C. 10 D. 9

The Constitution of India lays down that the two Houses of Parliament must be summoned at least – (1) four times a year (2) thrice a year (3) twice a year (4) once a year

Description : The Constitution of India lays down that the two Houses of Parliament must be summoned at least – (1) four times a year (2) thrice a year (3) twice a year (4) once a year

Last Answer : (3) twice a year Explanation: The period during which the House meets to conduct its business is called a session. The Constitution empowers the President to summon each House at such intervals that there ... month's gap between the two sessions. Hence the Parliament must meet at least twice a year.

How many times was the term of the Lok Sabha extended upto 6 years? (1) Once (2) Twice (3) Thrice (4) Never

Description : How many times was the term of the Lok Sabha extended upto 6 years? (1) Once (2) Twice (3) Thrice (4) Never

Last Answer : (1) Once Explanation: The first sitting of the Fifth Lok Sabha was held on 19 March, 1971. The term of the Fifth Lok Sabha, which was to expire on 18 March, 1976, was extended by one ... term of the Lok Sabha was restored to rivet years under the Constitution (Forty fourth Amendment) Act, 1978.

In India, how many times has the President declared Financial Emergency? (1) Once (2) Never (3) Thrice (4) Twice

Description : In India, how many times has the President declared Financial Emergency? (1) Once (2) Never (3) Thrice (4) Twice

Last Answer : (2) Never Explanation: No Financial Emergency has been declared so far, though there was a financial crisis in 1991. Article 360 empowers the president to proclaim a Financial Emergency if he is ... to which the financial stability or credit of India or any part of its territory is threatened.

It is customary to design a sewer for D.W.F. on the basis of A. Average demand B. Twice the average demand C. Thrice the average demand D. Four times the average demand

Description : It is customary to design a sewer for D.W.F. on the basis of A. Average demand B. Twice the average demand C. Thrice the average demand D. Four times the average demand

Last Answer : ANS: C

ECE Board Exam March 1996 According to the Nyquist theorem, the sampling rate that can be used in a PCM system is ________ the highest audio frequency. A. once B. eight times C. twice D. thrice

Description : ECE Board Exam March 1996 According to the Nyquist theorem, the sampling rate that can be used in a PCM system is ________ the highest audio frequency. A. once B. eight times C. twice D. thrice

Last Answer : C. twice

If the Earth's magnetic field lines pass through the Hall probe in opposite direction, then the change in reading of voltmeter is A. thrice the Earth's magnetic flux density B. four times the Earth's magnetic flux density C. five times the Earth's magnetic flux density D. twice the Earth's magnetic flux density

Description : If the Earth's magnetic field lines pass through the Hall probe in opposite direction, then the change in reading of voltmeter is A. thrice the Earth's magnetic flux density B. four times the Earth ... C. five times the Earth's magnetic flux density D. twice the Earth's magnetic flux density

Last Answer : twice the Earth's magnetic flux density

In a shell and tube heat exchanger, putting a longitudinal baffle across the shell, forces the shell side fluid to pass __________ through the heat exchanger. (A) Once (B) Twice (C) Thrice (D) Four times

Description : In a shell and tube heat exchanger, putting a longitudinal baffle across the shell, forces the shell side fluid to pass __________ through the heat exchanger. (A) Once (B) Twice (C) Thrice (D) Four times

Last Answer : (B) Twice

Programmable ROM (PROM), it is basically a blank ROM chip that can be written to, but only__: a) Twice b) Once c) Thrice d) None of These

Description : Programmable ROM (PROM), it is basically a blank ROM chip that can be written to, but only__: a) Twice b) Once c) Thrice d) None of These

Last Answer : b) Once

In MS-Word, a word gets selected by clicking the word: a) Once b) Twice c) Thrice d) None of These

Description : In MS-Word, a word gets selected by clicking the word: a) Once b) Twice c) Thrice d) None of These

Last Answer : b) Twice

The difference of level between a point below the plane of sight and one above, is the sum of two staff readings and an error would be produced equal to (A) The distance between the zero of gradient and the foot of the staff (B) Twice the distance between the zero of graduation and the foot of the staff (C) Thrice the distance between the zero of graduation and the foot of the staff (D) None of the above

Description : The difference of level between a point below the plane of sight and one above, is the sum of two staff readings and an error would be produced equal to (A) The distance between the zero of ... Thrice the distance between the zero of graduation and the foot of the staff (D) None of the above

Last Answer : (B) Twice the distance between the zero of graduation and the foot of the staff

The apparent error on reversal is (A) Equal to the actual error (B) Twice the actual error (C) Thrice the actual error (D) None of these

Description : The apparent error on reversal is (A) Equal to the actual error (B) Twice the actual error (C) Thrice the actual error (D) None of these

Last Answer : (B) Twice the actual error

Perpendicular offset from a tangent to the junction of a transition curve and circular curve is equal to (A) Shift (B) Twice the shift (C) Thrice the shift (D) Four times the shift

Description : Perpendicular offset from a tangent to the junction of a transition curve and circular curve is equal to (A) Shift (B) Twice the shift (C) Thrice the shift (D) Four times the shift

Last Answer : (D) Four times the shift

The radius of a bar bend to form a hook, should not be less than (A) Twice the diameter (B) Thrice the diameter (C) Four times the diameter (D) Five times the diameter

Description : The radius of a bar bend to form a hook, should not be less than (A) Twice the diameter (B) Thrice the diameter (C) Four times the diameter (D) Five times the diameter

Last Answer : Answer: Option A

The length of the straight portion of a bar beyond the end of the hook, should be at least (A) Twice the diameter (B) Thrice the diameter (C) Four times the diameter (D) Seven times the diameter

Description : The length of the straight portion of a bar beyond the end of the hook, should be at least (A) Twice the diameter (B) Thrice the diameter (C) Four times the diameter (D) Seven times the diameter

Last Answer : Answer: Option D

The discharge through a channel of rectangular section will be maximum, if (A) Its depth is twice the breadth (B) Its breadth is twice the depth (C) Its depth is thrice the breadth (D) Its breadth is thrice the depth

Description : The discharge through a channel of rectangular section will be maximum, if (A) Its depth is twice the breadth (B) Its breadth is twice the depth (C) Its depth is thrice the breadth (D) Its breadth is thrice the depth

Last Answer : Answer: Option B

A flaky aggregate is said to be elongated if its length is (A) Equal to the mean size (B) Twice the mean size (C) Thrice the mean size (D) Four times the mean size

Description : A flaky aggregate is said to be elongated if its length is (A) Equal to the mean size (B) Twice the mean size (C) Thrice the mean size (D) Four times the mean size

Last Answer : Answer: Option B

How many times chlorination must be carried out for cooling towers 1. Twice a year 2. Once a year 3. Thrice a year 4. None of above

Description : How many times chlorination must be carried out for cooling towers 1. Twice a year 2. Once a year 3. Thrice a year 4. None of above

Last Answer : Twice a year

. How many times year cooling water must be cleaned 1. Once a year 2. Thrice a year 3. Twice a year 4. Four times a year

Description : . How many times year cooling water must be cleaned 1. Once a year 2. Thrice a year 3. Twice a year 4. Four times a year

Last Answer : Twice a year

Ram, Suresh and Shilpa, working together, can do a piece of work in 1 day. Ram is thrice as efficient as Suresh, and Suresh takes twice the number of days as Shilpa takes to do it alone. What is the difference between the number of days taken by Ram and Shilpa, each working alone, to complete the work? a) 1 b) 2 c) 3 d) 4 e) 5

Description : Ram, Suresh and Shilpa, working together, can do a piece of work in 1 day. Ram is thrice as efficient as Suresh, and Suresh takes twice the number of days as Shilpa takes to do it alone. What is the difference between ... and Shilpa, each working alone, to complete the work? a) 1 b) 2 c) 3 d) 4 e) 5

Last Answer : Let the time taken by Ram, Suresh and Shilpa to finish the work alone be A, B and C respectively Therefore, 1/A + 1/B + 1/C = 1 Also it is given that, A = B/3 and C =B/2 3/B + 1/B + ... between the number of days taken by Ram and Shilpa, each working alone, to complete the work = 3-2 = 1 Answer: a)

A and B established a firm together. A’s investment was thrice that of B’s. A also kept the investment for twice as much time as B. If B got a profit of 4000, what was the total profit? A.30,000 B.28,000 C.40,000 D.45,000

Description : A and B established a firm together. A’s investment was thrice that of B’s. A also kept the investment for twice as much time as B. If B got a profit of 4000, what was the total profit? A.30,000 B.28,000 C.40,000 D.45,000

Last Answer : Answer- B(28,000) Explanation:- let B’s investment= X then A’s investment= 3X lets tim for B = t then,A’s time= 2t A:B 3X x 3t : X x t 6:1 B’s share= 1/7 x total = 4000 total=28,000

Ten years ago, Khush was thrice as old as Sam was but 10 years hence, he will be only twice as old. Find Khush’s present age? A.30 B.35 C.40 D.36 E.None of these

Description : Ten years ago, Khush was thrice as old as Sam was but 10 years hence, he will be only twice as old. Find Khush’s present age? A.30 B.35 C.40 D.36 E.None of these

Last Answer : Answer - A (30) Explanation - Let Khush's present age be x years and Sam's present age be y years Then, according to the first condition, x - 10 = 3(y - 10) or, x - 3y = -20 ..(1) Now. Khush's age ... (1) and (2), we get x = 70 and y = 30 Khush's age = 70 years and Sam's age = 30 years