Which of the following statement is correct? a. terminal section of a synchronous modem contains the scrambleb. receiver section of a synchronous modem contains the scrambler c. transmission section of a synchronous modem contains the scrambler d. control section of a synchronous modem contains the scrambler e. none of the abover

Which of the following statement is correct?
a. terminal section of a synchronous modem contains the scrambler
b. receiver section of a synchronous modem contains the scrambler
c. transmission section of a synchronous modem contains the scrambler
d. control section of a synchronous modem contains the scrambler
e. none of the above
by

1 Answer

Answer :

transmission section of a synchronous modem contains the scrambler
by

Related questions

In a synchronous modem, the digital-to-analog converter transmits signal to the a. equilizer b. modulator c. demodulator d. terminal e. none of aobve

Description : In a synchronous modem, the digital-to-analog converter transmits signal to the a. equilizer b. modulator c. demodulator d. terminal e. none of aobve

Last Answer : equilizer

In_________ transmission, we send bits oneafter another without startor stop bits or gaps. It is the responsibilityof the receiver togroup the bits. A) synchronous B) asynchronous C) isochronous D) none of the abov

Description : In_________ transmission, we send bits oneafter another without startor stop bits or gaps. It is the responsibilityof the receiver togroup the bits. A) synchronous B) asynchronous C) isochronous D) none of the abov

Last Answer : synchronous

Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard synchronous communication protocol. c. RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Description : Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard ... indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Last Answer : RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data

Modem is referred to as ______. A. Universal asynchronous Rx/Tx B. Data communication equipment C. Universal synchronous Rx/Tx D. Data terminal equipment

Description : Modem is referred to as ______. A. Universal asynchronous Rx/Tx B. Data communication equipment C. Universal synchronous Rx/Tx D. Data terminal equipment

Last Answer : B. Data communication equipment

Ina synchronous modem, the receive equilizer is known as a. adaptive equilizer b. impariment equilizer c. statistical equilizer d. compromise equilizer

Description : Ina synchronous modem, the receive equilizer is known as a. adaptive equilizer b. impariment equilizer c. statistical equilizer d. compromise equilizer

Last Answer : adaptive equilizer

Which of the following statement is incorrect? a. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission. b. Half duplex line is a communication line in which data can move in two directions, but not at the same time. c. Teleprocessing combines telecommunications and DP techniques in online activities d. Batch processing is the prefered processing mode for telecommunication operation.

Description : Which of the following statement is incorrect? a. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission. b. Half ... in online activities d. Batch processing is the prefered processing mode for telecommunication operation.

Last Answer : Batch processing is the prefered processing mode for telecommunication operation.

Computers cannot communicate with each other directly over telephone lines because they usedigitalpulses whereas telephone lines useanalog sound frequencies. What is the name of the device which permits digital to analog conversion at the start of a long distance transmission? A. Interface B. Modem C. Attenuation D. Teleprocessor E. None of the above

Description : Computers cannot communicate with each other directly over telephone lines because they usedigitalpulses whereas telephone lines useanalog sound frequencies. What is the name of the device which permits digital to analog ... A. Interface B. Modem C. Attenuation D. Teleprocessor E. None of the above

Last Answer : Modem

___________ is a device in data transmission to interface data terminal equipment to an analogue transmission line. A. RS 232 B. Connector C. Modem D. RJ-11 plug

Description : ___________ is a device in data transmission to interface data terminal equipment to an analogue transmission line. A. RS 232 B. Connector C. Modem D. RJ-11 plug

Last Answer : C. Modem

Which of the following is not a transmission medium? a. telephone lines b. coaxial cables c. modem d. microwave systems

Description : Which of the following is not a transmission medium? a. telephone lines b. coaxial cables c. modem d. microwave systems

Last Answer : microwave systems

The term 'duplex' refers to theability of the data receiving stations toecho back aconfirming messageto the sender. Infull duplex data transmission, both the sender and the receiver A. cannot talk at once B. can receive and send datasimultaneously C. can sendor receive data one ata time D. can do one way data transmission only E. None of the above

Description : The term 'duplex' refers to theability of the data receiving stations toecho back aconfirming messageto the sender. Infull duplex data transmission, both the sender and the receiver A. cannot talk at once B. can ... data one ata time D. can do one way data transmission only E. None of the above

Last Answer : can do one way data transmission only

The system unit of a personal computer typically contains all of the following except: a. Microprocessor b. Disk controller c. Serial interface d. Modem

Description : The system unit of a personal computer typically contains all of the following except: a. Microprocessor b. Disk controller c. Serial interface d. Modem

Last Answer : Modem

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Description : In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Last Answer : asynchronous

In synchronous TDM, forn signal sources of the same data rate, eachframe contains _______ slots. A) n B) n + 1 C) n- 1 D) 0to n

Description : In synchronous TDM, forn signal sources of the same data rate, eachframe contains _______ slots. A) n B) n + 1 C) n- 1 D) 0to n

Last Answer : n

How do I find the year on Polaris scrambler 500?

Description : How do I find the year on Polaris scrambler 500?

Last Answer : Need answer

Which of the following is an example of Organic Growth? A. Acquisition of an input supplier B. Fabric manufacturer's entry into apparel retailing C. Merger with a competitoD. All of the abover

Description : Which of the following is an example of Organic Growth? A. Acquisition of an input supplier B. Fabric manufacturer's entry into apparel retailing C. Merger with a competitor D. All of the above

Last Answer : Fabric manufacturer's entry into apparel retailing

The line control unit (LCU) operates on the data digital form. A. Data communications equipment (DCE) B. UART C. Modem D. Data terminal equipment (DTE)

Description : The line control unit (LCU) operates on the data digital form. A. Data communications equipment (DCE) B. UART C. Modem D. Data terminal equipment (DTE)

Last Answer : D. Data terminal equipment (DTE)

Your company has a LAN in its downtown officeandhas now set upa LAN inthe manufacturing plant inthe suburbs. Toenable everyoneto sharedata and resources between the two LANs, what type of device(s) are neededto connect them? Choose the most correct answer. A. Modem B. Cable C. Hub D. Router

Description : Your company has a LAN in its downtown officeandhas now set upa LAN inthe manufacturing plant inthe suburbs. Toenable everyoneto sharedata and resources between the two LANs, what type of device(s) are neededto connect them? Choose the most correct answer. A. Modem B. Cable C. Hub D. Router

Last Answer : Router

Which feature of Go Back N ARQ mechanism possesses an ability to assign the sliding window in the forward direction? a. Control Variables b. Sender Sliding Window c. Receiver Sliding Window d. Resending of frames

Description : Which feature of Go Back N ARQ mechanism possesses an ability to assign the sliding window in the forward direction? a. Control Variables b. Sender Sliding Window c. Receiver Sliding Window d. Resending of frames

Last Answer : b. Sender Sliding Window

Which feature of Go-Back-N ARQ mechanism possesses an ability to assign the sliding window in the forward diretion? A. Control Variables B. Sender Sliding Window C. Receiver Sliding Window D. Resending of frames

Description : Which feature of Go-Back-N ARQ mechanism possesses an ability to assign the sliding window in the forward diretion? A. Control Variables B. Sender Sliding Window C. Receiver Sliding Window D. Resending of frames

Last Answer : B. Sender Sliding Window

Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or load resistor B. noise factor expressed in decibels C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signal D. S/N of an ideal system divided by S/N at the output of the receiver or amplifier under test, both working at the same temperature over the same bandwidth and fed from the same source

Description : Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or ... under test, both working at the same temperature over the same bandwidth and fed from the same source

Last Answer : C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signals

Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control)c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Last Answer : d. All the above

Which of the following statement is False about the efficiency of the given channel? a. If we want to send big packets on the channel, then Stop and Wait is good choice. b. If length of packet increases, efficiency of channel also increases. c. Distance between sender and receiver is directly proportional to efficiency of channel. d. Efficient might be less if capacity of channel is high

Description : Which of the following statement is False about the efficiency of the given channel? a. If we want to send big packets on the channel, then Stop and Wait is good choice. b. If length ... is directly proportional to efficiency of channel. d. Efficient might be less if capacity of channel is high

Last Answer : Distance between sender and receiver is directly proportional to efficiency of channel.

State weather the following statement is true or false for Stream Control Transmission Protocol (SCTP). 1). SCTP uses only few known ports in the TCP space. 2).SCTP is a new transport protocol at the same layer as TCP and UDP. 3). SCTP is a new reliable, message oriented transport layer protocol. A. 1. True, 2. true, 3. true B. 1. true, 2. false, 3. false C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Description : State weather the following statement is true or false for Stream Control Transmission Protocol (SCTP). 1). SCTP uses only few known ports in the TCP space. 2).SCTP is a new transport protocol at the same layer as TCP and ... , 3. false C. 1. false, 2. false, 3. false D. 1.false, 2. true, 3. true

Last Answer : D. 1.false, 2. true, 3. true

Who is responsible in the correctness and accuracy of transmitted information content over a data communication? A. The channel B. The transmitter and receiver C. The modem D. The bridge

Description : Who is responsible in the correctness and accuracy of transmitted information content over a data communication? A. The channel B. The transmitter and receiver C. The modem D. The bridge

Last Answer : B. The transmitter and receiver

Main basic components of a data communication are composed of the following. A. Computer, modern and router B. Computer, bridge and gateway C. Transmitter, channel and receiver D. Transmitter, computer and modem

Description : Main basic components of a data communication are composed of the following. A. Computer, modern and router B. Computer, bridge and gateway C. Transmitter, channel and receiver D. Transmitter, computer and modem

Last Answer : C. Transmitter, channel and receiver

The correctness and accuracy of the transmitted message content is A. verified by the modem B. communications system C. determined by the sender and receiver D. ensured by use of digital technique

Description : The correctness and accuracy of the transmitted message content is A. verified by the modem B. communications system C. determined by the sender and receiver D. ensured by use of digital technique

Last Answer : C. determined by the sender and receiver

Suppose transmission rate of a channel is 32 kbps. If there are ‘8’ routes from source to destination and each packet p contains 8000 bits. Total end to end delay in sending packet P is _____. a. 2 sec b. 3 sec c. 4 sec d. 1 sec

Description : Suppose transmission rate of a channel is 32 kbps. If there are ‘8’ routes from source to destination and each packet p contains 8000 bits. Total end to end delay in sending packet P is _____. a. 2 sec b. 3 sec c. 4 sec d. 1 sec

Last Answer : a. 2 sec

Which of the following performs modulation and demodulation? a. fiber optics b. satellite c. coaxial cable d. modem e. none of the above

Description : Which of the following performs modulation and demodulation? a. fiber optics b. satellite c. coaxial cable d. modem e. none of the above

Last Answer : modem

The pieceof hardware that converts your computer'sdigital signal to ananalog signal that cantravel over telephone lines is called (A) red wire (B) blue cord (C) tower (D) modem (E) None of these

Description : The pieceof hardware that converts your computer'sdigital signal to ananalog signal that cantravel over telephone lines is called (A) red wire (B) blue cord (C) tower (D) modem (E) None of these

Last Answer : modem

The probability thata singlebit will be inerror on a typical public telephone lineusing 4800 bps modem is 10 to the power -3. If no error detection mechanism is used, the residual error ratefor a communicationline using 9-bit frames is approximately equal to A. 0.003 B. 0.009 C. 0.991 D. 0.999 E. None of the above

Description : The probability thata singlebit will be inerror on a typical public telephone lineusing 4800 bps modem is 10 to the power -3. If no error detection mechanism is used, the residual error ratefor a communicationline using 9-bit frames is ... to A. 0.003 B. 0.009 C. 0.991 D. 0.999 E. None of the above

Last Answer : 0.009

Synchronous modems cost more than asynchronous modem because _______. A. They have larger bandwidth B. They are larger C. The production volume is larger D. They have clock recovery circuits

Description : Synchronous modems cost more than asynchronous modem because _______. A. They have larger bandwidth B. They are larger C. The production volume is larger D. They have clock recovery circuits

Last Answer : D. They have clock recovery circuits

Which of the following is not referred to as data terminal equipment? A. Telephone set B. Printers C. Modem D. Computer

Description : Which of the following is not referred to as data terminal equipment? A. Telephone set B. Printers C. Modem D. Computer

Last Answer : C. Modem

The primary purpose of the data modem is to A. interface analog terminal equipment to analog communications channel B. interface digital terminal equipment to analog communications channel C. interface analog terminal equipment to digital communications channel D. interface digital terminal equipment to digital communications channel

Description : The primary purpose of the data modem is to A. interface analog terminal equipment to analog communications channel B. interface digital terminal equipment to analog communications ... to digital communications channel D. interface digital terminal equipment to digital communications channel

Last Answer : B. interface digital terminal equipment to analog communications channel

An important terminal that is required between DTE and PSTN is (A) Server (B) MODEM (C) Relay (D) Network card

Description : An important terminal that is required between DTE and PSTN is (A) Server (B) MODEM (C) Relay (D) Network card

Last Answer : (B) MODEM

This modem standard has a speed of 28.8k and has error-correction features. A. V.42 B. V.32bis C. V.90 D. V.34

Description : This modem standard has a speed of 28.8k and has error-correction features. A. V.42 B. V.32bis C. V.90 D. V.34

Last Answer : V.42

The term modem is a composite word that refers to the two functional entities that make up the device: asignal _______ and a signal _______. A) modulator; demodulator B) demodulator; modulator C) modern;demo D) none of the above

Description : The term modem is a composite word that refers to the two functional entities that make up the device: asignal _______ and a signal _______. A) modulator; demodulator B) demodulator; modulator C) modern;demo D) none of the above

Last Answer : modulator; demodulator

What type of telecommunicationshardware allows you to access the web? A) Browser B) Modem C) FTP protocol D) IRC

Description : What type of telecommunicationshardware allows you to access the web? A) Browser B) Modem C) FTP protocol D) IRC

Last Answer : Modem

Which of the following is used for modulation and demodulation? A. modem B. protocols C. gatewayD.multiplexerE.None of the above

Description : Which of the following is used for modulation and demodulation? A. modem B. protocols C. gateway D. multiplexer E. None of the above

Last Answer : modem

Frames from oneLAN can be transmitted to anotherLAN viathe device A. Router B. Bridge C. Repeater D. Modem

Description : Frames from oneLAN can be transmitted to anotherLAN viathe device A. Router B. Bridge C. Repeater D. Modem

Last Answer : Bridge

Which of the following devices takes data sent from one network device and forwards it to the destination node based on MAC address ? a. Hub b. Modem c. Switch d. Gateway

Description : Which of the following devices takes data sent from one network device and forwards it to the destination node based on MAC address ? a. Hub b. Modem c. Switch d. Gateway

Last Answer : c. Switch

Which of the following performs modulation and demodulation? a. fiber optics b. satellite c. coaxial cable d. Modem

Description : Which of the following performs modulation and demodulation? a. fiber optics b. satellite c. coaxial cable d. Modem

Last Answer : d. Modem

Satellite-Switched Time-Division Multiple Access (SS/TDMA) is A. the method of determining whichdevice has access tothe transmission medium at any time. B. a medium access control technique for multiple access transmission media C. a form of TDMA in which circuit switching is used to dynamically changethechannel assignments D. All of theabove E. None of the above

Description : Satellite-Switched Time-Division Multiple Access (SS/TDMA) is A. the method of determining whichdevice has access tothe transmission medium at any time. B. a medium access control technique for ... switching is used to dynamically changethechannel assignments D. All of theabove E. None of the above

Last Answer : a form of TDMA in which circuit switching is used to dynamically changethechannel assignments

The situation when both transmitter and receiver have to work in tandem is referred to as (A) parallel (B) serial (C) synchronous (D) asynchronous

Description : The situation when both transmitter and receiver have to work in tandem is referred to as (A) parallel (B) serial (C) synchronous (D) asynchronous

Last Answer : (C) synchronous

The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above

Description : The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above

Last Answer : they contain clock recovery circuits

The synchronous modems are more costly than the asynchronous modemsbecause A. they produce largevolumeof data B. they contain clock recovery circuits C. they transmit thedata with stop and start bits. D. they operate witha largerbandwidth E. None of the above

Description : The synchronous modems are more costly than the asynchronous modemsbecause A. they produce largevolumeof data B. they contain clock recovery circuits C. they transmit thedata with stop and start bits. D. they operate witha largerbandwidth E. None of the above

Last Answer : they contain clock recovery circuits

Which of the following condition is usedto transmit two packets overa medium at the same time? A. Contention B. Collision C. Synchronous D. Asynchronous E. None of the above

Description : Which of the following condition is usedto transmit two packets overa medium at the same time? A. Contention B. Collision C. Synchronous D. Asynchronous E. None of the above

Last Answer : Collision

If a firm wantedto transmit data from 1,000 punchedcards toa remote computer, they would use a(n) A. POS terminal B. data collection terminal C. batch processingterminal D. intelligent terminal E. None of the above

Description : If a firm wantedto transmit data from 1,000 punchedcards toa remote computer, they would use a(n) A. POS terminal B. data collection terminal C. batch processingterminal D. intelligent terminal E. None of the above

Last Answer : batch processingterminal

Inthe _____ Protocol, the sender sends one frame, stops until it receives confirmation from the receiver, and then sends the next frame. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Description : Inthe _____ Protocol, the sender sends one frame, stops until it receives confirmation from the receiver, and then sends the next frame. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Last Answer : Stop-and-Wait