The correctness and accuracy of the transmitted message content is A. verified by the modem B. communications system C. determined by the sender and receiver D. ensured by use of digital technique

The correctness and accuracy of the transmitted message content is
A. verified by the modem
B. communications system
C. determined by the sender and receiver
D. ensured by use of digital technique
by

1 Answer

Answer :

C. determined by the sender and receiver
by

Related questions

Who is responsible in the correctness and accuracy of transmitted information content over a data communication? A. The channel B. The transmitter and receiver C. The modem D. The bridge

Description : Who is responsible in the correctness and accuracy of transmitted information content over a data communication? A. The channel B. The transmitter and receiver C. The modem D. The bridge

Last Answer : B. The transmitter and receiver

Message _______ means that the receiver is ensured that the message is coming from the intended sender, not an imposter

Description : Message _______ means that the receiver is ensured that the message is coming from the intended sender, not an imposter

Last Answer : authentication

ECE Board Exam March 1996 Communications code is ____________. A. eight bits per character B. agreed upon in advance between sender and receiver C. the same in all modern computers D. either seven or eight bits per character

Description : ECE Board Exam March 1996 Communications code is ____________. A. eight bits per character B. agreed upon in advance between sender and receiver C. the same in all modern computers D. either seven or eight bits per character

Last Answer : B. agreed upon in advance between sender and receiver

The primary purpose of the data modem is to A. interface analog terminal equipment to analog communications channel B. interface digital terminal equipment to analog communications channel C. interface analog terminal equipment to digital communications channel D. interface digital terminal equipment to digital communications channel

Description : The primary purpose of the data modem is to A. interface analog terminal equipment to analog communications channel B. interface digital terminal equipment to analog communications ... to digital communications channel D. interface digital terminal equipment to digital communications channel

Last Answer : B. interface digital terminal equipment to analog communications channel

The line control unit (LCU) operates on the data digital form. A. Data communications equipment (DCE) B. UART C. Modem D. Data terminal equipment (DTE)

Description : The line control unit (LCU) operates on the data digital form. A. Data communications equipment (DCE) B. UART C. Modem D. Data terminal equipment (DTE)

Last Answer : D. Data terminal equipment (DTE)

In __________ transmission, a unique SYNC character is transmitted at the beginning of each message. A. asynchronous B. synchronous C. digital D. analogue

Description : In __________ transmission, a unique SYNC character is transmitted at the beginning of each message. A. asynchronous B. synchronous C. digital D. analogue

Last Answer : B. synchronous

Who should take the most responsibility for clear and effective communication? A. The Communications Manager B. The sender and the receiver C. The sender D. The receiver

Description : Who should take the most responsibility for clear and effective communication?  A. The Communications Manager B. The sender and the receiver C. The sender D. The receiver

Last Answer : B. The sender and the receiver

Codes must be A. agreed upon in advance between sender and receiver B. eight bit per character C. the same in all modern computer D. either seven or eighth bits per character

Description : Codes must be A. agreed upon in advance between sender and receiver B. eight bit per character C. the same in all modern computer D. either seven or eighth bits per character

Last Answer : A. agreed upon in advance between sender and receiver

ECE Board Exam March 1996 It is a spacecraft placed in orbit around the earth carrying onboard microwave receiver and transmitting equipments. A. Fiber optic equipment B. Communications satellite C. Wireless radio system D. Coaxial cable syste

Description : ECE Board Exam March 1996 It is a spacecraft placed in orbit around the earth carrying onboard microwave receiver and transmitting equipments. A. Fiber optic equipment B. Communications satellite C. Wireless radio system D. Coaxial cable syste

Last Answer : B. Communications satellite

Main basic components of a data communication are composed of the following. A. Computer, modern and router B. Computer, bridge and gateway C. Transmitter, channel and receiver D. Transmitter, computer and modem

Description : Main basic components of a data communication are composed of the following. A. Computer, modern and router B. Computer, bridge and gateway C. Transmitter, channel and receiver D. Transmitter, computer and modem

Last Answer : C. Transmitter, channel and receiver

Which of the following is used as an optical receiver in fiber optics communications a. APD b. Tunnel diode c. Laser diode d. LED

Description : Which of the following is used as an optical receiver in fiber optics communications a. APD b. Tunnel diode c. Laser diode d. LED

Last Answer : a. APD

Which of the following is the basic component of a communications satellite receiver? A. On-board computer B. Reflector C. Telemetry D. Transponder

Description : Which of the following is the basic component of a communications satellite receiver? A. On-board computer B. Reflector C. Telemetry D. Transponder

Last Answer : D. Transponder

In what form does the information of data communications is transmitted between two points? A. Alphanumeric form B. Alphabetic form C. Numeric form D. Binary form

Description : In what form does the information of data communications is transmitted between two points? A. Alphanumeric form B. Alphabetic form C. Numeric form D. Binary form

Last Answer : D. Binary form

Which transmission technique guarantees that data packets will be received by the receiver in the same order in which they were sent by the sender? (A) Broadcasting (B) Unicasting (C) Packet Switching (D) Circuit Switching

Description : Which transmission technique guarantees that data packets will be received by the receiver in the same order in which they were sent by the sender? (A) Broadcasting (B) Unicasting (C) Packet Switching (D) Circuit Switching

Last Answer : (D) Circuit Switching

The suitable medium to establish commonness between sender and receiver of message

Description : The suitable medium to establish commonness between sender and receiver of message

Last Answer : Ans. Communication

What are the basic elements of communication? (a) Sender and receiver (b) Message and channel of communication (c) Response and feedback (d) All of the above

Description : What are the basic elements of communication? (a) Sender and receiver (b) Message and channel of communication (c) Response and feedback (d) All of the above

Last Answer : (d) All of the above

How does spatial isolation technique in satellite communications avoid interference? A. Use of different polarity antennas B. Use of different types of antennas C. Employment of highly directional spot-beam antennas D. Use of low gain antennas

Description : How does spatial isolation technique in satellite communications avoid interference? A. Use of different polarity antennas B. Use of different types of antennas C. Employment of highly directional spot-beam antennas D. Use of low gain antennas

Last Answer : C. Employment of highly directional spot-beam antennas

What height of an ionized layer is determined from the time interval between the transmitted signal and the ionospheric echo at vertical incidence? A. Virtual height B. Apparent height C. Actual height D. Effective height

Description : What height of an ionized layer is determined from the time interval between the transmitted signal and the ionospheric echo at vertical incidence? A. Virtual height B. Apparent height C. Actual height D. Effective height

Last Answer : A. Virtual height

The process by which a sender transmits content is known as (a) Encoding ; (b) Decoding ; (c) Feedback ; (d) Receiver

Description : The process by which a sender transmits content is known as (a) Encoding ; (b) Decoding ; (c) Feedback ; (d) Receiver

Last Answer : (a) Encoding ;

In a digital transmission, the receiver clock is 0.1 percent faster than the sender clock. How many extra bits per second does the receiver receive if the data rate is 1 Mbps ? (A) 10 bps (B) 100 bps (C) 1000 bps (D) 10000 bps

Description : In a digital transmission, the receiver clock is 0.1 percent faster than the sender clock. How many extra bits per second does the receiver receive if the data rate is 1 Mbps ? (A) 10 bps (B) 100 bps (C) 1000 bps (D) 10000 bps

Last Answer : (C) 1000 bps 

One of the following statements is NOT true : (A) Accuracy expresses the correctness of measurement (B) Precision represents reproducibility of measurement (C) High degree of precision implies high degree of accuracy also (D) High degree of accuracy implies high degree of precesion also

Description : One of the following statements is NOT true : (A) Accuracy expresses the correctness of measurement (B) Precision represents reproducibility of measurement (C) High degree of precision implies high degree of accuracy also (D) High degree of accuracy implies high degree of precesion also

Last Answer : (C) High degree of precision implies high degree of accuracy also

Determine the correctness or otherwise of the following Assertion [a] and the Reason [r]. Assertion: Fast decoupled load flow method gives approximate load flow solution because it uses several assumptions. Reason: Accuracy depends on the power mismatch vector tolerance. a) Both [a] and [r] are true and [r] is the correct reason for [a]. b) Both [a] and [r] are true and [r] is not the correct reason for [a]. c) [a] is false and [r] is true.

Description : Determine the correctness or otherwise of the following Assertion [a] and the Reason [r]. Assertion: Fast decoupled load flow method gives approximate load flow solution because it uses several assumptions. Reason: Accuracy ... the correct reason for [a]. c) [a] is false and [r] is true.

Last Answer : c) [a] is false and [r] is true

The extent to which a software tolerates the unexpected problems, is termed as: (A) Accuracy (B) Reliability (C) Correctness (D) Robustness

Description : The extent to which a software tolerates the unexpected problems, is termed as: (A) Accuracy (B) Reliability (C) Correctness (D) Robustness

Last Answer : (D) Robustness

The extent to which a software performs its intended functions without failures, is termed as (A) Robustness (B) Correctness (C) Reliability (D) Accuracy

Description : The extent to which a software performs its intended functions without failures, is termed as (A) Robustness (B) Correctness (C) Reliability (D) Accuracy

Last Answer : (C) Reliability

The vehicle through which the coded message is transmitted from the source to the receiver is called a(n) A)coder. B)decoder. C)encoder. D)relay channel. E)medium of transmission.

Description : The vehicle through which the coded message is transmitted from the source to the receiver is called a(n) A)coder. B)decoder. C)encoder. D)relay channel. E)medium of transmission.

Last Answer : E)medium of transmission.

The conversion of digital signal into analog for purposes of transmitting into the telephone line is done through ______. A. ISDN B. Radio C. RS232C D. Modem

Description : The conversion of digital signal into analog for purposes of transmitting into the telephone line is done through ______. A. ISDN B. Radio C. RS232C D. Modem

Last Answer : D. Modem

Which of the following would be least likely to pose a barrier to cross-cultural communications? (a) Tone difference ; (b) Word connotations ; (c) Political correctness ; (d) Differences among perceptions

Description : Which of the following would be least likely to pose a barrier to cross-cultural communications? (a) Tone difference ; (b) Word connotations ; (c) Political correctness ; (d) Differences among perceptions

Last Answer : (c) Political correctness ;

Rules governing the transmission of digital information. A. Line protocol B. Isochronous C. Data communications D. Digital communications

Description : Rules governing the transmission of digital information. A. Line protocol B. Isochronous C. Data communications D. Digital communications

Last Answer : B. Isochronous

What is the device used in fiber optic communication which consist of a receiver transmitter use to clean up and amplify digital data moving in one direction and another in the opposite direction? A. Optic compressors B. Optic retarders C. Optic isolator D. Optic regenerators

Description : What is the device used in fiber optic communication which consist of a receiver transmitter use to clean up and amplify digital data moving in one direction and another in the opposite direction? A. Optic compressors B. Optic retarders C. Optic isolator D. Optic regenerators

Last Answer : D. Optic regenerators

A digital signature is required (i) to tie an electronic message to the sender’s identity (ii)for non repudiation of communication by a sender (iii) to prove that a message was sent by the sender in a court of law (iv) in all e-mail transactions a. i and ii b. i, ii, iii c. i, ii, iii, iv d. ii, iii, iv

Description : A digital signature is required (i) to tie an electronic message to the sender's identity (ii)for non repudiation of communication by a sender (iii) to prove that a message was sent by the sender in a court of law (iv) in all ... a. i and ii b. i, ii, iii c. i, ii, iii, iv d. ii, iii, iv

Last Answer : b. i, ii, iii

Digital modulation technique used in modems. A. ASK B. PSK C. FSK D. All of these

Description : Digital modulation technique used in modems. A. ASK B. PSK C. FSK D. All of these

Last Answer : B. PSK

. ________ is the recording system which enables sender to leave messages for receiver by telephone. (a) E-Mail ; (b) Voice Mail ; (c) Videoconferencing ; (d) Teleconferencing

Description : . ________ is the recording system which enables sender to leave messages for receiver by telephone. (a) E-Mail ; (b) Voice Mail ; (c) Videoconferencing ; (d) Teleconferencing

Last Answer : (b) Voice Mail ;

A system that performs parallel-to-serial and serial-to-parallel conversion of data link. A. DCE B. DTE C. Modem D. PC

Description : A system that performs parallel-to-serial and serial-to-parallel conversion of data link. A. DCE B. DTE C. Modem D. PC

Last Answer : B. DTE

The local loop of the telephone system is understood to be A. a single piece of wire connecting the subscriber’s telephone set to another telephone set in an adjacent room B. a two-wire or four-wire communication circuit between the customer’s premise and central office C. a four-wire circuit connecting a facsimile machine to a computer D. a group of wires connecting a telephone set to a modem

Description : The local loop of the telephone system is understood to be A. a single piece of wire connecting the subscriber's telephone set to another telephone set in an adjacent room B. a two-wire or four- ... a facsimile machine to a computer D. a group of wires connecting a telephone set to a modem

Last Answer : B. a two-wire or four-wire communication circuit between the customer’s premise and central office

Inthe _____ Protocol, the sender sends one frame, stops until it receives confirmation from the receiver, and then sends the next frame. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Description : Inthe _____ Protocol, the sender sends one frame, stops until it receives confirmation from the receiver, and then sends the next frame. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Last Answer : Stop-and-Wait

Inthe _____ Protocol, the sender sends its frames oneafter another with noregard to the receiver. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Description : Inthe _____ Protocol, the sender sends its frames oneafter another with noregard to the receiver. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Last Answer : Stop-and-Wait B) Simplest

The term 'duplex' refers to theability of the data receiving stations toecho back aconfirming messageto the sender. Infull duplex data transmission, both the sender and the receiver A. cannot talk at once B. can receive and send datasimultaneously C. can sendor receive data one ata time D. can do one way data transmission only E. None of the above

Description : The term 'duplex' refers to theability of the data receiving stations toecho back aconfirming messageto the sender. Infull duplex data transmission, both the sender and the receiver A. cannot talk at once B. can ... data one ata time D. can do one way data transmission only E. None of the above

Last Answer : can do one way data transmission only

Which of the following statement is False about the efficiency of the given channel? a. If we want to send big packets on the channel, then Stop and Wait is good choice. b. If length of packet increases, efficiency of channel also increases. c. Distance between sender and receiver is directly proportional to efficiency of channel. d. Efficient might be less if capacity of channel is high

Description : Which of the following statement is False about the efficiency of the given channel? a. If we want to send big packets on the channel, then Stop and Wait is good choice. b. If length ... is directly proportional to efficiency of channel. d. Efficient might be less if capacity of channel is high

Last Answer : Distance between sender and receiver is directly proportional to efficiency of channel.

A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of an acknowledgement is 100 bytes and the transmission rate at the receiver is 8 Kbps. The one-way propagation delay is 100 milliseconds. Assuming no frame is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Description : A sender uses the Stop-and-Wait ARQ protocol for reliable transmission of frames. Frames are of size 1000 bytes and the transmission rate at the sender is 80 Kbps (1Kbps = 1000 bits/second). Size of ... is lost, the sender throughput is __________ bytes/second. a. 2500 b. 2000 c. 1500 d. 500

Last Answer : a. 2500

Which feature of Go Back N ARQ mechanism possesses an ability to assign the sliding window in the forward direction? a. Control Variables b. Sender Sliding Window c. Receiver Sliding Window d. Resending of frames

Description : Which feature of Go Back N ARQ mechanism possesses an ability to assign the sliding window in the forward direction? a. Control Variables b. Sender Sliding Window c. Receiver Sliding Window d. Resending of frames

Last Answer : b. Sender Sliding Window

The Post Office Protocol is an ………... protocol with both client (sender/receiver) and …………...functions A. electronic mail, server (storage) B. three layer , server C. UDP, transfer D. TCP, server

Description : The Post Office Protocol is an ………... protocol with both client (sender/receiver) and …………...functions A. electronic mail, server (storage) B. three layer , server C. UDP, transfer D. TCP, server

Last Answer : A. electronic mail, server (storage)

Which feature of Go-Back-N ARQ mechanism possesses an ability to assign the sliding window in the forward diretion? A. Control Variables B. Sender Sliding Window C. Receiver Sliding Window D. Resending of frames

Description : Which feature of Go-Back-N ARQ mechanism possesses an ability to assign the sliding window in the forward diretion? A. Control Variables B. Sender Sliding Window C. Receiver Sliding Window D. Resending of frames

Last Answer : B. Sender Sliding Window

Symmetric - key cryptography refers to ______methods in which both the sender and receiver share the same key ( or , less commonly, in which their keys are different but related in an easily computable way): a) Encryption b) Decryption c) Both of above d) None of These

Description : Symmetric - key cryptography refers to ______methods in which both the sender and receiver share the same key ( or , less commonly, in which their keys are different but related in an easily computable way): a) Encryption b) Decryption c) Both of above d) None of These

Last Answer : a) Encryption

In the communication process, the receiver and sender are classified as A. communication functions B. communication parties C. communication tools D. communication channels

Description : In the communication process, the receiver and sender are classified as A. communication functions B. communication parties C. communication tools D. communication channels

Last Answer : B. communication parties

____________communication process, receiver and sender are classified as A.functions B.parties C.tools D.channels Answer: B

Description : ____________communication process, receiver and sender are classified as A.functions B.parties C.tools D.channels Answer: B

Last Answer : B.parties

Symmetric - key cryptography refers to ______methods in which both the sender and receiver share the same key ( or , less commonly, in which their keys are different but related in an easily computable way): a) Encryption b) Decryption c) Both of above d) None of These

Description : Symmetric - key cryptography refers to ______methods in which both the sender and receiver share the same key ( or , less commonly, in which their keys are different but related in an easily computable way): a) Encryption b) Decryption c) Both of above d) None of These

Last Answer : a) Encryption

Communication will be effective if: (a) It is delivered slowly and clearly (b) It is delivered in a calm situation (c) It reaches the receiver completely (d) It reaches the receiver as intended by the sender

Description : Communication will be effective if: (a) It is delivered slowly and clearly (b) It is delivered in a calm situation (c) It reaches the receiver completely (d) It reaches the receiver as intended by the sender

Last Answer : d) It reaches the receiver as intended by the sender

In Huffman encoding, both the sender and receiver must have a copy of the code a. Same b. Different c. Generate on Demand d. Both (a) and (b)

Description : In Huffman encoding, both the sender and receiver must have a copy of the code a. Same b. Different c. Generate on Demand d. Both (a) and (b)

Last Answer : a. Same

A person, group, or organisation that has a meaning it intends and attempts to share with a receiver or an audience is a A)medium of transmission. B)source. C)relay channel. D)decoder. E)sender.

Description : A person, group, or organisation that has a meaning it intends and attempts to share with a receiver or an audience is a A)medium of transmission. B)source. C)relay channel. D)decoder. E)sender.

Last Answer : B)source.