the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of
a. Cylinder
b. Hum
c. Cluster
d. Surface
by

1 Answer

Answer :

Surface
by

Related questions

the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Description : the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Last Answer : d. Surface

the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Description : the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Last Answer : d. Surface

Storage capacity of magnetic disk depends on a. tracks per inch of surface b. bits per inch of tracks c. disk pack in disk surface d. All of above

Description : Storage capacity of magnetic disk depends on a. tracks per inch of surface b. bits per inch of tracks c. disk pack in disk surface d. All of above

Last Answer : All of above

Storage capacity of magnetic disk depends on A) tracks per inch of surface B) bits per inch of tracks C) disk pack in disk surface D) All of above

Description : Storage capacity of magnetic disk depends on A) tracks per inch of surface B) bits per inch of tracks C) disk pack in disk surface D) All of above

Last Answer : Answer : D

Storage capacity of magnetic disk depends on a. tracks per inch of surface b. bits per inch of tracks c. disk pack in disk surface d. All of above

Description : Storage capacity of magnetic disk depends on a. tracks per inch of surface b. bits per inch of tracks c. disk pack in disk surface d. All of above

Last Answer : d. All of above

When we move from the outermost track to the innermost track in a magnetic disk, then density (bits per linear inch)

Description : When we move from the outermost track to the innermost track in a magnetic disk, then density (bits per linear inch)  (1) decreases (2) increases (3) remains the same (4) either remains constant or decreases

Last Answer : increases

The disk drive component used to position read/write heads over a specific track I known as a. Acoustic couples b. Access arm c. Cluster d. All of the above

Description : The disk drive component used to position read/write heads over a specific track I known as a. Acoustic couples b. Access arm c. Cluster d. All of the above

Last Answer : Access arm

A group of magnetic tapes, videos or terminals usually under the control of one master is A) Cylinder B) Surface C) Track D) Cluster

Description : A group of magnetic tapes, videos or terminals usually under the control of one master is A) Cylinder B) Surface C) Track D) Cluster

Last Answer : Answer : D

A group of magnetic tapes, videos or terminals usually under the control of one master is a. Cylinder b. Surface c. Track d. Cluster

Description : A group of magnetic tapes, videos or terminals usually under the control of one master is a. Cylinder b. Surface c. Track d. Cluster

Last Answer : d. Cluster

A group of magnetic tapes, videos or terminals usually under the control of one master is a. Cylinder b. Surface c. Track d. Cluster

Description : A group of magnetic tapes, videos or terminals usually under the control of one master is a. Cylinder b. Surface c. Track d. Cluster

Last Answer : d. Cluster

A group of magnetic tapes, videos or terminals usually under the control of one master is a. Cylinder b. Surface c. Track d. Cluster

Description : A group of magnetic tapes, videos or terminals usually under the control of one master is a. Cylinder b. Surface c. Track d. Cluster

Last Answer : d. Cluster

The capacity of 3.5 inch floppy disk is a. 1.40 MB b. 1.44 GB c. 1.40 GB d. 1.44 MB

Description : The capacity of 3.5 inch floppy disk is a. 1.40 MB b. 1.44 GB c. 1.40 GB d. 1.44 MB

Last Answer : 1.44 MB

Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? a. Track number b. Sector number c. Surface number d. All of above

Description : Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? a. Track number b. Sector number c. Surface number d. All of above

Last Answer : Track number

Reading data is performed in magnetic disk by a. Read/write leads b. Sectors c. Track d. Lower surface

Description : Reading data is performed in magnetic disk by a. Read/write leads b. Sectors c. Track d. Lower surface

Last Answer : Read/write leads

A floppy disk contains a. Circular tracks only b. Sectors only c. Both circular tracks and sectors d. All of the above

Description : A floppy disk contains a. Circular tracks only b. Sectors only c. Both circular tracks and sectors d. All of the above

Last Answer : Both circular tracks and sectors

“““.is the process ofdividing the disk into tracks and sectors. (A) Tracking (B) Formatting (C) Crashing (D) Allotting (E) None of these

Description : “““.is the process ofdividing the disk into tracks and sectors. (A) Tracking (B) Formatting (C) Crashing (D) Allotting (E) None of these

Last Answer : Formatting

The disk drive component used to position read/write heads over a specific track I known as a. Acoustic couples b. Access arm c. Cluster d. All of the above

Description : The disk drive component used to position read/write heads over a specific track I known as a. Acoustic couples b. Access arm c. Cluster d. All of the above

Last Answer : b. Access arm

The disk drive component used to position read/write heads over a specific track I known as a. Acoustic couples b. Access arm c. Cluster d. All of the above

Description : The disk drive component used to position read/write heads over a specific track I known as a. Acoustic couples b. Access arm c. Cluster d. All of the above

Last Answer : b. Access arm

Seek time is a. time to position the head over proper track b. time to position the head over proper sector c. time to position the head over proper cylinder d. none of above

Description : Seek time is a. time to position the head over proper track b. time to position the head over proper sector c. time to position the head over proper cylinder d. none of above

Last Answer : time to position the head over proper track

Walking home one day, you take a short cut along the train tracks. The tracks cross a narrow bridge over a deep gorge. At the point you are 3/8 of the way across the bridge, you hear the train whistle somewhere behind you. You charge across the bridge, and jump off the track as the train is about to run you down. As it happens, if you had gone the other way, you would have reached safety just before being run over as well. If you can run ten miles per hour, how fast is the train moving? -Riddles

Description : Walking home one day, you take a short cut along the train tracks. The tracks cross a narrow bridge over a deep gorge. At the point you are 3/8 of the way across the bridge, you hear the train whistle ... run over as well. If you can run ten miles per hour, how fast is the train moving? -Riddles

Last Answer : The train is moving at 40 miles per hour. Imagine that a friend is walking with you. When the train whistle blows, you head away from the train, he heads toward it. When he reaches safety, you ... the bridge in the time you cross the remaining 1/4, the train must be moving four times your speed.

The capacity of 3.5 inch floppy disk is A) 1.40 MB B) 1.44 GB C) 1.40 GB D) 1.44 MB

Description : The capacity of 3.5 inch floppy disk is A) 1.40 MB B) 1.44 GB C) 1.40 GB D) 1.44 MB

Last Answer : Answer : D

The capacity of 3.5 inch floppy disk is a. 1.40 MB b. 1.44 GB c. 1.40 GB d. 1.44 MB

Description : The capacity of 3.5 inch floppy disk is a. 1.40 MB b. 1.44 GB c. 1.40 GB d. 1.44 MB

Last Answer : a. 1.40 MB

The capacity of 3.5 inch floppy disk is a. 1.40 MB b. 1.44 GB c. 1.40 GB d. 1.44 MB

Description : The capacity of 3.5 inch floppy disk is a. 1.40 MB b. 1.44 GB c. 1.40 GB d. 1.44 MB

Last Answer : d. 1.44 MB

The IBM PC-XT was the first to include a hard drive. What was the capacity of this disk ? 750 KB 10 KB 20 KB 1.44 KB

Description : The IBM PC-XT was the first to include a hard drive. What was the capacity of this disk ? 750 KB 10 KB 20 KB 1.44 KB

Last Answer : 10 KB

The most important advantage of a video disk is a. Compactness b. Potential capacity c. Durability d. Cost effectiveness

Description : The most important advantage of a video disk is a. Compactness b. Potential capacity c. Durability d. Cost effectiveness

Last Answer : Compactness

A disk storage medium in the form of an assembly containing a single rigid magnetic disk permanently is a. Fixed disk b. Disk cartridge c. Card punch d. Card reader

Description : A disk storage medium in the form of an assembly containing a single rigid magnetic disk permanently is a. Fixed disk b. Disk cartridge c. Card punch d. Card reader

Last Answer : Disk cartridge

What is the latest write-once optical storage media? a. Digital paper b. Magneto-optical disk c. WORM disk d. CD-ROM disk

Description : What is the latest write-once optical storage media? a. Digital paper b. Magneto-optical disk c. WORM disk d. CD-ROM disk

Last Answer : Magneto-optical disk

Which of the following is not a primary storage device? a. Magnetic tape b. Magnetic disk c. Optical disk d. None of above

Description : Which of the following is not a primary storage device? a. Magnetic tape b. Magnetic disk c. Optical disk d. None of above

Last Answer : None of above

What is the process of copying software programs from secondary storage mediato the hard disk called? (A) Configuration(B) Download(C) Storage(D) Upload(E) Installation

Description : What is the process of copying software programs from secondary storage mediato the hard disk called? (A) Configuration (B) Download (C) Storage (D) Upload (E) Installation

Last Answer : Upload

A DVD is an example ofa(n) – (A) hard disk (B) opticaldisc (C) output device (D) solid-state storage device (E) None of these

Description : A DVD is an example ofa(n) – (A) hard disk (B) opticaldisc (C) output device (D) solid-state storage device (E) None of these

Last Answer : opticaldisc

A disk has 500 bytes/sector,100 sectors / track, 20 heads and 1000 cylinders. Total capacity of disk is

Description : A disk has 500 bytes/sector,100 sectors / track, 20 heads and 1000 cylinders. Total capacity of disk is  (a) 1 GB (b) 100 MB (c) 10 MB (d) 10 GB

Last Answer : A disk has 500 bytes/sector,100 sectors / track, 20 heads and 1000 cylinders. Total capacity of disk is 1 GB

Tape speed is measured in a. Feet per second b. Inch per second c. Meter per second d. Centimeter per second

Description : Tape speed is measured in a. Feet per second b. Inch per second c. Meter per second d. Centimeter per second

Last Answer : Inch per second

a computer which CPU speed around 100 million instruction per second and with the word length of around 64 bits is known as a. Super computer b. Mini computer c. Micro computer d. Macro computer

Description : a computer which CPU speed around 100 million instruction per second and with the word length of around 64 bits is known as a. Super computer b. Mini computer c. Micro computer d. Macro computer

Last Answer : Super computer

a computer which CPU speed around 100 million instruction per second and with the word length of around 64 bits is known as a. Super computer b. Mini computer c. Micro computer d. Macro computer

Description : a computer which CPU speed around 100 million instruction per second and with the word length of around 64 bits is known as a. Super computer b. Mini computer c. Micro computer d. Macro computer

Last Answer : Super computer

Number of bits per symbol used in Baudot code is a. 7 b. 5 c. 8d. 9

Description : Number of bits per symbol used in Baudot code is a. 7 b. 5 c. 8 d. 9

Last Answer : 5

The cheapest modems cantransmit A. 300 bits per second B. 1,200 bitsper second C. 2,400 bits per second D. 4,800 bits per second E. None of the above

Description : The cheapest modems cantransmit A. 300 bits per second B. 1,200 bitsper second C. 2,400 bits per second D. 4,800 bits per second E. None of the above

Last Answer : 300 bits per second

What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) Baud C) Bits per second D) Both B and C

Description : What is the commonly used unit for measuring the speed of data transmission? A) Bytes per second B) Baud C) Bits per second D) Both B and C

Last Answer : B) Baud

If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ______. a. 64 Kbps b. 32 Mbps c. 32 Kbps d. 64 MbpS

Description : If link transmits 4000 frames per second and each slot has 8 bits, the transmission rate of circuit of this TDM is ______. a. 64 Kbps b. 32 Mbps c. 32 Kbps d. 64 MbpS

Last Answer : c. 32 Kbps

A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute with each frame carrying an average of 10,000 bits. What is the throughput of this network ? a. 1 Mbps b. 2 Mbps c. 10 Mbps d. 12 Mbps

Description : A network with bandwidth of 10 Mbps can pass only an average of 12,000 frames per minute with each frame carrying an average of 10,000 bits. What is the throughput of this network ? a. 1 Mbps b. 2 Mbps c. 10 Mbps d. 12 Mbps

Last Answer : b. 2 Mbps

A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network? a. 2 Mbps b. 60 Mbps c. 120 Mbps

Description : A network with bandwidth of 10 Mbps can pass only an average of 15,000 frames per minute with each frame carrying an average of 8,000 bits. What is the throughput of this network? a. 2 Mbps b. 60 Mbps c. 120 Mbps

Last Answer : a. 2 Mbps

Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Last Answer : d. 20000

How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Last Answer : b. 800

The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channelcapacity. Assuming that processing delay is negligible, the minimum number of bits for the sequence number field in a frame for maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Description : The distance between two stations M and N is L kilometers. All frames are K bits long. The propagation delay per kilometer is t seconds. Let R bits/second be the channel capacity. Assuming that processing ... maximum utilization, when the sliding window protocol used is: a. A b. B c. C d. D

Last Answer : c. C

A seamless cylinder of storage capacity of 0.03mᵌis subjected to an internal pressure of 21MPa. The ultimate strength of material of cylinder is 350N/mm².Determine the thickness of the cylinder if it is twice the diameter of the cylinder. a) 12mm b) 4mm c) 8mm d) 16mm

Description : A seamless cylinder of storage capacity of 0.03mᵌis subjected to an internal pressure of 21MPa. The ultimate strength of material of cylinder is 350N/mm².Determine the thickness of the cylinder if it is twice the diameter of the cylinder. a) 12mm b) 4mm c) 8mm d) 16mm

Last Answer : c) 8mm

A seamless cylinder of storage capacity of 0.03mᵌis subjected to an internal pressure of 21MPa. The ultimate strength of material of cylinder is 350N/mm².Determine the length of the cylinder if it is twice the diameter of the cylinder. a) 540mm b) 270mm c) 400mm d) 350mm

Description : A seamless cylinder of storage capacity of 0.03mᵌis subjected to an internal pressure of 21MPa. The ultimate strength of material of cylinder is 350N/mm².Determine the length of the cylinder if it is twice the diameter of the cylinder. a) 540mm b) 270mm c) 400mm d) 350mm

Last Answer : a) 540mm

In SQL, the command(s) is (are)used tocreate an index for atable or cluster A. CREATE INDEX B. MODIFY INDEX C. SET INDEX TO FILE D. All of theabove E. None of the above

Description : In SQL, the command(s) is (are)used tocreate an index for atable or cluster A. CREATE INDEX B. MODIFY INDEX C. SET INDEX TO FILE D. All of theabove E. None of the above

Last Answer : CREATE INDEX

Gauss law can be evaluated in which coordinate system? a) Cartesian b) Cylinder c) Spherical d) Depends on the Gaussian surface

Description : Gauss law can be evaluated in which coordinate system? a) Cartesian b) Cylinder c) Spherical d) Depends on the Gaussian surface

Last Answer : d) Depends on the Gaussian surface

In a Hadoop cluster, what is true for a HDFS block that is no longer available due to disk corruption or machine failure? a)It is lost for ever b)It can be replicated form its alternative locations to other live machines. c)The namenode allows new client request to keep trying to read it. d)The Mapreduce job process runs ignoring the block and the data stored in it.

Description : In a Hadoop cluster, what is true for a HDFS block that is no longer available due to disk corruption or machine failure? a)It is lost for ever b)It can be replicated form its alternative locations ... to read it. d)The Mapreduce job process runs ignoring the block and the data stored in it.

Last Answer : It can be replicated form its alternative locations to other live machines.

.In computing, ________ improves the distribution of workloads across multiple computing resources, such as computers, a computer cluster, network links, central processing units, or disk drives. a) Virtual machine b) Virtual computing c) Virtual cloud d) Load balancer

Description : .In computing, ________ improves the distribution of workloads across multiple computing resources, such as computers, a computer cluster, network links, central processing units, or disk drives. a) Virtual machine b) Virtual computing c) Virtual cloud d) Load balancer

Last Answer : Load balancer