Seek time is a. time to position the head over proper track b. time to position the head over proper sector c. time to position the head over proper cylinder d. none of above

Seek time is
a. time to position the head over proper track
b. time to position the head over proper sector
c. time to position the head over proper cylinder
d. none of above
by

1 Answer

Answer :

time to position the head over proper track
by

Related questions

Seek time is A) time to position the head over proper track B) time to position the head over proper sector C) time to position the head over proper cylinder D) none of above

Description : Seek time is A) time to position the head over proper track B) time to position the head over proper sector C) time to position the head over proper cylinder D) none of above

Last Answer : Answer : A

Seek time is a. time to position the head over proper track b. time to position the head over proper sector c. time to position the head over proper cylinder d. none of above

Description : Seek time is a. time to position the head over proper track b. time to position the head over proper sector c. time to position the head over proper cylinder d. none of above

Last Answer : a. time to position the head over proper track

Latency time is a. Time to spin the needed data under head b. Time to spin the needed data under track c. Time to spin data under sector d. All of above

Description : Latency time is a. Time to spin the needed data under head b. Time to spin the needed data under track c. Time to spin data under sector d. All of above

Last Answer : Time to spin the needed data under head

the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Description : the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Last Answer : Surface

Consider a disk queue with request for input/output to block on cylinders 98, 183, 37, 122, 14, 124, 65, 67 in that order. Assume that disk head is initially positioned at cylinder 53 and moving towards cylinder number 0. The total number of head movements using Shortest Seek Time First (SSTF) and SCAN algorithms are respectively (A) 236 and 252 cylinders (B) 640 and 236 cylinders (C) 235 and 640 cylinders (D) 235 and 252 cylinders

Description : Consider a disk queue with request for input/output to block on cylinders  98, 183, 37, 122, 14, 124, 65, 67  in that order. Assume that disk head is initially positioned at cylinder 53 and moving ... and 252 cylinders (B) 640 and 236 cylinders (C) 235 and 640 cylinders (D) 235 and 252 cylinders

Last Answer : Answer: 236 and 208 cylinders Explanation: SSTF Initial head position =53 The closest queue to initial head position=65 head moves from 53 to 65=12 head moves from 65 to 67=2 head moves from 67 ... 122=24 head moves from 122 to 124=2 head moves from 124 to 183=59 Total head movement=208 

Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? a. Track number b. Sector number c. Surface number d. All of above

Description : Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? a. Track number b. Sector number c. Surface number d. All of above

Last Answer : Track number

The disk drive component used to position read/write heads over a specific track I known as a. Acoustic couples b. Access arm c. Cluster d. All of the above

Description : The disk drive component used to position read/write heads over a specific track I known as a. Acoustic couples b. Access arm c. Cluster d. All of the above

Last Answer : Access arm

Latency time is A) Time to spin the needed data under head B) Time to spin the needed data under track C) Time to spin data under sector D) All of above

Description : Latency time is A) Time to spin the needed data under head B) Time to spin the needed data under track C) Time to spin data under sector D) All of above

Last Answer : Answer : A

Latency time is a. Time to spin the needed data under head b. Time to spin the needed data under track c. Time to spin data under sector

Description : Latency time is a. Time to spin the needed data under head b. Time to spin the needed data under track c. Time to spin data under sector

Last Answer : a. Time to spin the needed data under head

Time taken to move from one cylinder of a HDD to another is called 1) Transfer Rate 2) Average seek time 3) Latency 4) Roundtrip time

Description : Time taken to move from one cylinder of a HDD to another is called 1) Transfer Rate 2) Average seek time 3) Latency 4) Roundtrip time

Last Answer : 2) Average seek time

Time taken to move from one cylinder of a HDD to another is called 1 Transfer Rate 2 Average seek time 3 Latency 4 Roundtrip time

Description : Time taken to move from one cylinder of a HDD to another is called 1 Transfer Rate 2 Average seek time 3 Latency 4 Roundtrip time

Last Answer : 2 Average seek time

Access time is a. seek time + latency time b. seek time c. seek time – latency time d. latency time

Description : Access time is a. seek time + latency time b. seek time c. seek time – latency time d. latency time

Last Answer : seek time + latency time

............. is the time required to move the disk arm to the required track. A) Seek time B) Rotational delay C) Latency time D) Access time

Description : ............. is the time required to move the disk arm to the required track. A) Seek time B) Rotational delay C) Latency time D) Access time

Last Answer : A) Seek time

Consider a disk with 16384 bytes per track having a rotation time of 16 msec and average seek time of 40 msec. What is the time in msec to read a block of 1024 bytes from this disk? (A) 57 msec (B) 49 msec (C) 48 msec (D) 17 msec

Description : Consider a disk with 16384 bytes per track having a rotation time of 16 msec and average seek time of 40 msec. What is the time in msec to read a block of 1024 bytes from this disk? (A) 57 msec (B) 49 msec (C) 48 msec (D) 17 msec

Last Answer : Answer: B

Which one of the following statements is NOT correct about HTTP cookies? a. A cookies is a piece of code that has the potential to compromise the security of an Internet user b. A cookie gains entry to the user’s work area through an HTTP header c. A cookie has an expiry date and time d. Cookies can be used to track the browsing pattern of a user at a particular site

Description : Which one of the following statements is NOT correct about HTTP cookies? a. A cookies is a piece of code that has the potential to compromise the security of an Internet user b. A cookie gains entry ... and time d. Cookies can be used to track the browsing pattern of a user at a particular site

Last Answer : a. A cookies is a piece of code that has the potential to compromise the security of an Internet user

A group of magnetic tapes, videos or terminals usually under the control of one master is A) Cylinder B) Surface C) Track D) Cluster

Description : A group of magnetic tapes, videos or terminals usually under the control of one master is A) Cylinder B) Surface C) Track D) Cluster

Last Answer : Answer : D

A group of magnetic tapes, videos or terminals usually under the control of one master is a. Cylinder b. Surface c. Track d. Cluster

Description : A group of magnetic tapes, videos or terminals usually under the control of one master is a. Cylinder b. Surface c. Track d. Cluster

Last Answer : d. Cluster

the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Description : the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Last Answer : d. Surface

A group of magnetic tapes, videos or terminals usually under the control of one master is a. Cylinder b. Surface c. Track d. Cluster

Description : A group of magnetic tapes, videos or terminals usually under the control of one master is a. Cylinder b. Surface c. Track d. Cluster

Last Answer : d. Cluster

A group of magnetic tapes, videos or terminals usually under the control of one master is a. Cylinder b. Surface c. Track d. Cluster

Description : A group of magnetic tapes, videos or terminals usually under the control of one master is a. Cylinder b. Surface c. Track d. Cluster

Last Answer : d. Cluster

the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Description : the storage capacity of a disk system depends on the bits per inch of track and the tracks per inch of a. Cylinder b. Hum c. Cluster d. Surface

Last Answer : d. Surface

Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory address register b. Memory data register c. Instruction register d. Program counter

Description : Which of the following registers is used to keep track of address of the memory location where the next instruction is located? a. Memory address register b. Memory data register c. Instruction register d. Program counter

Last Answer : Program counter

Reading data is performed in magnetic disk by a. Read/write leads b. Sectors c. Track d. Lower surface

Description : Reading data is performed in magnetic disk by a. Read/write leads b. Sectors c. Track d. Lower surface

Last Answer : Read/write leads

What is Difference between track and sector?

Description : What is Difference between track and sector?

Last Answer : track is a invisible circle on hard disk.and sectors are thesegments of these circles.

Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? A) Track number B) Sector number C) Surface number D) All of above

Description : Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? A) Track number B) Sector number C) Surface number D) All of above

Last Answer : Answer : D

Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? a. Track number b. Sector number c. Surface number d. All of above

Description : Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? a. Track number b. Sector number c. Surface number d. All of above

Last Answer : d. All of above

Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? a. Track number b. Sector number c. Surface number d. All of above

Description : Before a disk drive can access any sector record, a computer program has to provide the record’s disk address. What information does this address specify? a. Track number b. Sector number c. Surface number d. All of above

Last Answer : d. All of above

A disk has 500 bytes/sector,100 sectors / track, 20 heads and 1000 cylinders. Total capacity of disk is

Description : A disk has 500 bytes/sector,100 sectors / track, 20 heads and 1000 cylinders. Total capacity of disk is  (a) 1 GB (b) 100 MB (c) 10 MB (d) 10 GB

Last Answer : A disk has 500 bytes/sector,100 sectors / track, 20 heads and 1000 cylinders. Total capacity of disk is 1 GB

The disk drive component used to position read/write heads over a specific track I known as a. Acoustic couples b. Access arm c. Cluster d. All of the above

Description : The disk drive component used to position read/write heads over a specific track I known as a. Acoustic couples b. Access arm c. Cluster d. All of the above

Last Answer : b. Access arm

The disk drive component used to position read/write heads over a specific track I known as a. Acoustic couples b. Access arm c. Cluster d. All of the above

Description : The disk drive component used to position read/write heads over a specific track I known as a. Acoustic couples b. Access arm c. Cluster d. All of the above

Last Answer : b. Access arm

Black I am and much admired, men seek me until they're tired. When they find me, they break my head, and take from me my resting bed. What am I? -Riddles

Description : Black I am and much admired, men seek me until they're tired. When they find me, they break my head, and take from me my resting bed. What am I? -Riddles

Last Answer : Coal

What would be the proper command to set a DCE clock rate of 56k for a serial interface? A. Router (config) # clockrate 56000 B. Router# clockrate 56000. C. Router (config-if) #clock rate 56000 D. Router (config-if) # clockrate 56k

Description : What would be the proper command to set a DCE clock rate of 56k for a serial interface? A. Router (config) # clockrate 56000 B. Router# clockrate 56000. C. Router (config-if) #clock rate 56000 D. Router (config-if) # clockrate 56k

Last Answer : Router (config-if) #clock rate 56000

The proper definition of a modern digital computer is a. An electronic automated machine that can solve problems involving words and numbers b. A more sophistic and modified electronic pocket calculator c. Any machine that can perform mathematical operations d. A machine that works on binary code

Description : The proper definition of a modern digital computer is a. An electronic automated machine that can solve problems involving words and numbers b. A more sophistic and modified electronic pocket calculator c. Any machine that can perform mathematical operations d. A machine that works on binary code

Last Answer : A machine that works on binary code

_______ describes the position of the waveform relative to time 0. A) Frequency B) Phase C) Amplitude D) Voltage

Description : _______ describes the position of the waveform relative to time 0. A) Frequency B) Phase C) Amplitude D) Voltage

Last Answer : Phase

In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the first and the last bytes of the payload, respectively are a. Last fragment, 2400 and 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Description : In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the ... 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Last Answer : c. Last fragment, 2400 and 2759

In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the first and the last bytes of the payload, respectively are a. Last fragment, 2400 and 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Description : In an IPv4 datagram, the M bit is 0, the value of HLEN is 10, the value of total length is 400 and the fragment offset value is 300. The position of the datagram, the sequence numbers of the ... 2789 b. First fragment, 2400 and 2759 c. Last fragment, 2400 and 2759 d. Middle fragment, 300 and 689

Last Answer : c. Last fragment, 2400 and 2759

The term professional accountant in public practice includes the following, except: a. A sole proprietor providing professional services to a client. b. Each partner or person occupying a position similar to that of a partner staff in a practice providing professional services to a client. c. Professional accountants employed in the public sector having managerial responsibilities. d. A firm of professional accountants in public practice

Description : The term professional accountant in public practice includes the following, except: a. A sole proprietor providing professional services to a client. b. Each partner or person occupying a ... public sector having managerial responsibilities. d. A firm of professional accountants in public practice

Last Answer : Professional accountants employed in the public sector having managerial responsibilities

Existing accountant, as defined in the Code of Ethics, means a. A professional accountant employed in industry, commerce, the public sector or education. b. Those persons who hold a valid certificate issued by the Board of Accountancy. c. A professional accountant in public practice currently holding an audit appointment or carrying out accounting, taxation, consulting or similar professional services for a client. d. A sole proprietor, or each partner or person occupying a position similar to that of a partner and each staff in a practice providing professional services

Description : Existing accountant, as defined in the Code of Ethics, means a. A professional accountant employed in industry, commerce, the public sector or education. b. Those persons who hold a valid ... a position similar to that of a partner and each staff in a practice providing professional services

Last Answer : A professional accountant in public practice currently holding an audit appointment or carrying out accounting, taxation, consulting or similar professional services for a client.

state keeps track of position related to execution of an instruction: a. Major b. Minor c. Botha & b d. None of these

Description : state keeps track of position related to execution of an instruction: a. Major b. Minor c. Botha & b d. None of these

Last Answer : a. Major

What is the rule concerning level or height the aircraft should maintain when flying IFR outside controlled airspace unless otherwise directed? a. 2,000 feet above the highest obstacle within 8kms of the heading b. 1,000 feet above the highest obstacle within 8kms of the estimated position of the aircraft c. 1,000 feet above the highest obstacle within 8kms of the planned track d. 2,000 feet above the highest obstacle within 8kms of the planned track

Description : What is the rule concerning level or height the aircraft should maintain when flying IFR outside controlled airspace unless otherwise directed? a. 2,000 feet above the highest obstacle within 8kms of the ... planned track d. 2,000 feet above the highest obstacle within 8kms of the planned track

Last Answer : b. 1,000 feet above the highest obstacle within 8kms of the estimated position of the aircraft

In the actuator arm assembly of a hard disk drive transport, what device can position the magnetic heads to the correct track of a hard disk more accurately than a dc stepper motor?

Description : In the actuator arm assembly of a hard disk drive transport, what device can position the magnetic heads to the correct track of a hard disk more accurately than a dc stepper motor?

Last Answer : Voice coil servo.

From the flight deck you observe an aeroplane in the forward left position on an opposite parallel track. What Nav light will be used? a. Green b. Red c. White d. All of the above

Description : From the flight deck you observe an aeroplane in the forward left position on an opposite parallel track. What Nav light will be used? a. Green b. Red c. White d. All of the above

Last Answer : b. Red

What is the rule concerning level or height the aircraft should maintain when flying IFR outside controlled airspace unless otherwise directed? a. 2,000 feet above the highest obstacle within 8kms of the heading b. 1,000 feet above the highest obstacle within 8kms of the estimated position of the aircraft c. 1,000 feet above the highest obstacle within 8kms of the planned track d. 2,000 feet above the highest obstacle within 8kms of the planned track

Description : What is the rule concerning level or height the aircraft should maintain when flying IFR outside controlled airspace unless otherwise directed? a. 2,000 feet above the highest obstacle within 8kms of ... planned track d. 2,000 feet above the highest obstacle within 8kms of the planned track

Last Answer : b. 1,000 feet above the highest obstacle within 8kms of the estimated position of the aircraft

Can i use a head gasket I bought for a 2.5L 4 cylinder be used on a 3.5L?

Description : Can i use a head gasket I bought for a 2.5L 4 cylinder be used on a 3.5L?

Last Answer : No - the bore for the cylinders are different

How do I remove the cylinder head on a Chev Spark?

Description : How do I remove the cylinder head on a Chev Spark?

Last Answer : If one had manuals for each 100,000,s of vehicle on the road, wewould need sites like this, right?

What are the torque settings for Kia 2700 cylinder head and tappet clearance?

Description : What are the torque settings for Kia 2700 cylinder head and tappet clearance?

Last Answer : Feel Free to Answer

What is the tightening of cylinder head bolt on KIA NAZA RIA 2.5L GASOLINE ENGINE?

Description : What is the tightening of cylinder head bolt on KIA NAZA RIA 2.5L GASOLINE ENGINE?

Last Answer : Need answer

A cylinder head temperature gauge measures: a. The temperature of the hottest cylinder b. The temperature of all the cylinders and gives an average reading c. The temperature of the coolest cylinder d. The temperature of the two cylinders furthest away from each other divided by two

Description : A cylinder head temperature gauge measures: a. The temperature of the hottest cylinder b. The temperature of all the cylinders and gives an average reading c. The temperature of the coolest cylinder d. The temperature of the two cylinders furthest away from each other divided by two

Last Answer : a. The temperature of the hottest cylinder

The EGT indication on a piston engine is used: a. To control the cooling air shutters b. To monitor the oil temperature c. To assist the pilot to adjust the fuel mixture d. To indicate cylinder head temperature

Description : The EGT indication on a piston engine is used: a. To control the cooling air shutters b. To monitor the oil temperature c. To assist the pilot to adjust the fuel mixture d. To indicate cylinder head temperature

Last Answer : c. To assist the pilot to adjust the fuel mixture

A cylinder head temperature gauge measures: a. The temperature of the hottest cylinder b. The temperature of all the cylinders and gives an average reading c. The temperature of the coolest cylinder d. The temperature of the two cylinders furthest away from each other divided by two

Description : A cylinder head temperature gauge measures: a. The temperature of the hottest cylinder b. The temperature of all the cylinders and gives an average reading c. The temperature of the coolest cylinder d. The temperature of the two cylinders furthest away from each other divided by two

Last Answer : a. The temperature of the hottest cylinder