What is communication channel for am and fm broadcast

by

1 Answer

Answer :

AM=Amplitude modulation and 

FM = Frequency modulation.
by

Related questions

The channel spacing in the Philippine FM broadcast standards

Description : The channel spacing in the Philippine FM broadcast standards

Last Answer : 800 kHz

The channel spacing in the Philippine FM broadcast standards.

Description : The channel spacing in the Philippine FM broadcast standards.

Last Answer : 800 kHz

Communication channel is shared by all the machines on the network in ________ a) broadcast network b) unicast network c) multicast network d) anycast network

Description : Communication channel is shared by all the machines on the network in ________ a) broadcast network b) unicast network c) multicast network d) anycast network

Last Answer : a) broadcast network

The allowable deviation ratio of commercial FM broadcast. A. 25 B. 15 C. 5 D. 75

Description : The allowable deviation ratio of commercial FM broadcast. A. 25 B. 15 C. 5 D. 75

Last Answer : C. 5

What do you call the service area of a standard AM broadcast where fading is allowed but not objectionable co-channel interference? A. Experimental B. Secondary C. Tertiary D. Primary

Description : What do you call the service area of a standard AM broadcast where fading is allowed but not objectionable co-channel interference? A. Experimental B. Secondary C. Tertiary D. Primary

Last Answer : B. Secondary

How far is the visual carrier from the lowest frequency in the spectrum of a monochrome TV broadcast channel following the NTSC standard? A. 1.5 MHz B. 1.25 MHz C. 4.5 MHz D. 0.25 MHz

Description : How far is the visual carrier from the lowest frequency in the spectrum of a monochrome TV broadcast channel following the NTSC standard? A. 1.5 MHz B. 1.25 MHz C. 4.5 MHz D. 0.25 MHz

Last Answer : B. 1.25 MHz

Which of the following is the forward control channel that is used to broadcast information? a) BCCH b) CCCH c) DCCH d) TCH

Description : Which of the following is the forward control channel that is used to broadcast information? a) BCCH b) CCCH c) DCCH d) TCH

Last Answer : a) BCCH

Term in communication which is referred, “to send out in all direction”. A. Announce B. Broadcast C. Transmit D. Media

Description : Term in communication which is referred, “to send out in all direction”. A. Announce B. Broadcast C. Transmit D. Media

Last Answer : B. Broadcast

Considering non personal communication channels, social networking sites, email and company websites are considered as a) Broadcast media b) Display media c) Online media d) Print media

Description : Considering non personal communication channels, social networking sites, email and company websites are considered as a) Broadcast media b) Display media c) Online media d) Print media

Last Answer : c) Online media

A one-to-many communication between one sourceand a specific group of hosts is classifiedas a _______ communication. A) unicast B) multicast C) broadcast D) none of the above

Description : A one-to-many communication between one sourceand a specific group of hosts is classifiedas a _______ communication. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : multicast

A one-to-all communication between one source and all hosts on a network is classified as a_______ communication. A) unicast B) multicast C) broadcast D) none of the above

Description : A one-to-all communication between one source and all hosts on a network is classified as a_______ communication. A) unicast B) multicast C) broadcast D) none of the above

Last Answer : broadcast

Which of the following is NOT true about User Datagram Protocol in transport layer?a. Works well in unidirectional communication, suitable for broadcast information. b. It does three way handshake before sending datagrams c. It provides datagrams, suitable for modeling other protocols such as in IP tunneling or Remote Procedure Call and the Network File System d. The lack of retransmission delays makes it suitable for real-time applications

Description : Which of the following is NOT true about User Datagram Protocol in transport layer? a. Works well in unidirectional communication, suitable for broadcast information. b. It does three way ... File System d. The lack of retransmission delays makes it suitable for real-time applications

Last Answer : b. It does three way handshake before sending datagrams

There are two types of designs for communication subnets: they are ………… A. Point-to-Point channels and Broadcast channels B. packet-switched subnet and store-and-forward C. Multicasting and Broadcasting D. Point-to-Point channels and store-and-forward

Description : There are two types of designs for communication subnets: they are ………… A. Point-to-Point channels and Broadcast channels B. packet-switched subnet and store-and-forward C. Multicasting and Broadcasting D. Point-to-Point channels and store-and-forward

Last Answer : A. Point-to-Point channels and Broadcast channels

Considering non-personal communication channels, magazines, direct mail and newspapers are considered as *  online media  print media  broadcast media display media

Description : Considering non-personal communication channels, magazines, direct mail and newspapers are considered as *  online media  print media  broadcast media  display media

Last Answer :  print media

Considering non-personal communication channels, the magazines, direct mail and newspapers are considered as A. online media B. print media C. broadcast media D. display media

Description : Considering non-personal communication channels, the magazines, direct mail and newspapers are considered as A. online media B. print media C. broadcast media D. display media

Last Answer : B. print media

Considering non-personal communication channels, magazines, direct mail and newspapers are considered as A.online media B.print media C.broadcast media D.display media Answer :B

Description : Considering non-personal communication channels, magazines, direct mail and newspapers are considered as A.online media B.print media C.broadcast media D.display media Answer :B

Last Answer : B.print media

Experience has shown that the most feasible plan for utilizing occupational orientation programme broadcast by radio is Options: A) The recording of the programme for inter communication playback B) The direct hook-up of the programme with all class-room radios C) The assignment of pupils to listen to and report on the programme D) The bringing of pupils to listen to and report on the programme

Description : Experience has shown that the most feasible plan for utilizing occupational orientation programme broadcast by radio is Options: A) The recording of the programme for inter communication playback B) The direct ... on the programme D) The bringing of pupils to listen to and report on the programme

Last Answer : A) The recording of the programme for inter communication playback 

In a broadcast communication receiver, most of the receiver selectivity is achieved in:

Description : In a broadcast communication receiver, most of the receiver selectivity is achieved in: (1) RF section (2) IF section (3) Mixer (4) Local oscillator 

Last Answer : In a broadcast communication receiver, most of the receiver selectivity is achieved in: RF section

What is the channel number of an FM station with a carrier frequency of 99.5 MHz? A. 256 B. 258 C. 257 D. 259

Description : What is the channel number of an FM station with a carrier frequency of 99.5 MHz? A. 256 B. 258 C. 257 D. 259

Last Answer : B. 258

An FM receiver whose intermediate frequency is 10.7 MHz, is experiencing image channel interference from a station transmitting on 121.1 MHz. If the local oscillator is tracking above, the receiver is tuned to A. 131.8 MHz B. 110.4 MHz C. 142.5 MHz D. 99.7 MHz

Description : An FM receiver whose intermediate frequency is 10.7 MHz, is experiencing image channel interference from a station transmitting on 121.1 MHz. If the local oscillator is tracking above, the receiver is tuned to A. 131.8 MHz B. 110.4 MHz C. 142.5 MHz D. 99.7 MHz

Last Answer : D. 99.7 MHz

How many FM stations would be accommodated I an ordinary TV channel? A. 33 B. 30 C. 40 D. 25

Description : How many FM stations would be accommodated I an ordinary TV channel? A. 33 B. 30 C. 40 D. 25

Last Answer : B. 30

Compare AM with FM with respect to following points: a) Definition. b) Modulation index. c) Bandwidth. d) Side band.

Description : Compare AM with FM with respect to following points: a) Definition. b) Modulation index. c) Bandwidth. d) Side band.

Last Answer : Parameters AM FM Definition It is the process in which the amplitude of carrier signal is varied in accordance with the instantaneous value of modulating signal keeping frequency and ... frequency deviation. Side band There are two sidebands Infinite number of sideband

If news is broadcast from London at 10:30 AM, at what time it will be heard at Baghdad (450 E)? -Do You Know?

Description : If news is broadcast from London at 10:30 AM, at what time it will be heard at Baghdad (450 E)? -Do You Know?

Last Answer : answer:

Where does the AM broadcast band located in the spectrum band? A. HF band B. VHF band C. LF band D. MF band

Description : Where does the AM broadcast band located in the spectrum band? A. HF band B. VHF band C. LF band D. MF band

Last Answer : D. MF band

The frequency tolerance of an AM radio broadcast station A. 200 Hz B. 2000 Hz C. 20 Hz D. 2 Hz

Description : The frequency tolerance of an AM radio broadcast station A. 200 Hz B. 2000 Hz C. 20 Hz D. 2 Hz

Last Answer : C. 20 Hz

What is the local oscillator frequency range commercial AM broadcast if it is equal to 455 KHz. A. 540 to 1600 KHz B. 0 to 1600 KHz C. 995 to 2055 KHz D. 0 to 455 KHz

Description : What is the local oscillator frequency range commercial AM broadcast if it is equal to 455 KHz. A. 540 to 1600 KHz B. 0 to 1600 KHz C. 995 to 2055 KHz D. 0 to 455 KHz

Last Answer : C. 995 to 2055 KHz

What is the type of emission use by standard AM radio broadcast? A. A0 B. F3 C. A3 D. A5C

Description : What is the type of emission use by standard AM radio broadcast? A. A0 B. F3 C. A3 D. A5C

Last Answer : C. A3

The maximum power suggested by KBP on 919-1312 AM broadcast station in Metro Manila is A. 10 kW B. 20 kW C. 15 kW D. 5 kW

Description : The maximum power suggested by KBP on 919-1312 AM broadcast station in Metro Manila is A. 10 kW B. 20 kW C. 15 kW D. 5 kW

Last Answer : B. 20 kW

Which frequency band is the standard AM radio broadcast? A. HF B. UHF C. MF D. VHF

Description : Which frequency band is the standard AM radio broadcast? A. HF B. UHF C. MF D. VHF

Last Answer : C. MF

If news is broadcast from London at 10:30 AM, at what time it will be heard at Baghdad (450 E)?

Description : If news is broadcast from London at 10:30 AM, at what time it will be heard at Baghdad (450 E)?

Last Answer : 1:30 PM

The service are in standard AM broadcast is described as ______ if there is no fading of signal.

Description : The service are in standard AM broadcast is described as ______ if there is no fading of signal.

Last Answer : Primary

The service are in standard AM broadcast is described as ______ if there is no fading of signal.

Description : The service are in standard AM broadcast is described as ______ if there is no fading of signal.

Last Answer : Primary

Compare narrow band FM with wide band FM.

Description : Compare narrow band FM with wide band FM.

Last Answer : Narrow band FM Wide band FM 1 .Modulation Index is less than or slightly greater than 1.  1. Modulation Index is greater than 1.  2.Maximum deviation is ... .Application:-FM mobile communication like police wireless, ambulance etc. 5. Application:-Entertainment broadcasting.

Draw neat block diagram of FM receiver and explain function of each block

Description : Draw neat block diagram of FM receiver and explain function of each block

Last Answer : Explanation:-  RF amplifier: There are two important functions of RF amplifier: 1) To increase the strength of weak RF signal. 2) To reject image frequency signal. In FM ... FM broadcast, the maximum modulating frequency is 15 kHz. Hence the audio amplifier must have large bandwidth.

List different methods of demodulation of FM signal.

Description : List different methods of demodulation of FM signal.

Last Answer : Balanced Slope detection Ratio detector Foster Seeley discriminator Phase locked loop demodulator 

What is the importance of communication channel? -Technology

Description : What is the importance of communication channel? -Technology

Last Answer : Communication channel is responsible for carrying data in the form of signals from sender to receiver.

Write down the name of communication channel used for telephone line and TV. -Technology

Description : Write down the name of communication channel used for telephone line and TV. -Technology

Last Answer : Communication channel for telephone line is twisted pair cable and for TV is co-axial cable.

Write down the name of communication channel used for telephone line and TV. -Technology

Description : Write down the name of communication channel used for telephone line and TV. -Technology

Last Answer : Communication channel for telephone line is twisted pair cable and for TV is co-axial cable.

Communication channel for telephone line is twisted pair cable and for TV is co_axial cable. -Technology

Description : Communication channel for telephone line is twisted pair cable and for TV is co_axial cable. -Technology

Last Answer : Optical fibre provides secure transmission as compared to twisted pair and co-axial cable. As, it is more immune to tapping than copper cables.

When the computer network uses telephone lines as communication channel -Technology

Description : When the computer network uses telephone lines as communication channel -Technology

Last Answer : MODEMperforms the task of Modulation at sender's site and DEModulation at the receiver's end. Basically, our computer generates data in the form of digital signals which needs to be forwarded ... signals should be converted back to the original digital signals, then this is called demodulation.

Ram and Sita, two persons talking to one another. 1. What are the components of the network? 2. What is the communication channel? -Technology

Description : Ram and Sita, two persons talking to one another. 1. What are the components of the network? 2. What is the communication channel? -Technology

Last Answer : 1. Components of network are as follows:(a) Sender(b) Communication channel(c) Receiver2. Communication channel is the channel in which two computers can communicate with each other by sending data or sharing information between them.

Write down the name of communication channel used for telephone line and TV -Technology

Description : Write down the name of communication channel used for telephone line and TV -Technology

Last Answer : Communication channel for telephone line is twisted pair cable and for TV is co-axial cable.

In mode, the communication channel is used in both directions at the same time? A) Full-duplex B) Simplex C) Half-duplex D) None of the above

Description : In mode, the communication channel is used in both directions at the same time? A) Full-duplex B) Simplex C) Half-duplex D) None of the above

Last Answer : Answer : A

Who acts as the channel of communication between the President and the Council Ministers? (1) Chairman, Rajya Sabha (2) Speaker of Lok Sabha (3) Vice-President (4) Prime Minister

Description : Who acts as the channel of communication between the President and the Council Ministers? (1) Chairman, Rajya Sabha (2) Speaker of Lok Sabha (3) Vice-President (4) Prime Minister

Last Answer : (4) Prime Minister Explanation: The Prime Minister is the chief channel of communication between the President and the Council of Ministers and keeps the former informed about all the decisions of the ... a Council of Ministers with the Prime Minister at the head to aid and advice the President.

Who is responsible in the correctness and accuracy of transmitted information content over a data communication? A. The channel B. The transmitter and receiver C. The modem D. The bridge

Description : Who is responsible in the correctness and accuracy of transmitted information content over a data communication? A. The channel B. The transmitter and receiver C. The modem D. The bridge

Last Answer : B. The transmitter and receiver

Main basic components of a data communication are composed of the following. A. Computer, modern and router B. Computer, bridge and gateway C. Transmitter, channel and receiver D. Transmitter, computer and modem

Description : Main basic components of a data communication are composed of the following. A. Computer, modern and router B. Computer, bridge and gateway C. Transmitter, channel and receiver D. Transmitter, computer and modem

Last Answer : C. Transmitter, channel and receiver

How would one squeeze more channels of communication into TDM frames of standard length? A. Shorten the time delay for each channel B. Raise the amplitude C. Add modulators D. Remove the synchronizing pulses

Description : How would one squeeze more channels of communication into TDM frames of standard length? A. Shorten the time delay for each channel B. Raise the amplitude C. Add modulators D. Remove the synchronizing pulses

Last Answer : A. Shorten the time delay for each channel

Element of Communication is— (A) Message (B) Feedback (C) Channel (D) All of these

Description : Element of Communication is— (A) Message (B) Feedback (C) Channel (D) All of these

Last Answer : (D) All of these

Which one is a communication channel threat? a) Sniffer programs b) Cyber vandalism c) Integrity threats d) All of the above

Description : Which one is a communication channel threat? a) Sniffer programs b) Cyber vandalism c) Integrity threats d) All of the above

Last Answer : d) All of the above

THE PROCESS OF COMMUNICATION NEEDS A SENDER, A RECIPIENT AND A.... a) Caprice b) Medium c) Channel d) None of these

Description : THE PROCESS OF COMMUNICATION NEEDS A SENDER, A RECIPIENT AND A.... a) Caprice b) Medium c) Channel d) None of these

Last Answer : c) Channel