Thermophilic micro-organism grow well at temperature– 1) 10°C – 20°C 2) 20°C – 40°C 3) 50°C – 60°C 4) 5°C – 7°C

Thermophilic micro-organism grow well at temperature–
1) 10°C – 20°C
2) 20°C – 40°C
3) 50°C – 60°C
4) 5°C – 7°C
by

1 Answer

Answer :

3) 50°C – 60°C
by

Related questions

Lumirhodopsin is stable only at temperature below (A) –10°C (B) –20°C (C) –40°C (D) –50°C

Description : Lumirhodopsin is stable only at temperature below (A) –10°C (B) –20°C (C) –40°C (D) –50°C

Last Answer : Answer : D

Which of the following are optimum temperature conditions for making benzenediazonium chloride from aniline? (a) 0°C to 10°C (b) 20°C to 25°C (c) 30°C to 40°C (d) 45°C to 50°C

Description : Which of the following are optimum temperature conditions for making benzenediazonium chloride from aniline? (a) 0°C to 10°C (b) 20°C to 25°C (c) 30°C to 40°C (d) 45°C to 50°C

Last Answer : 0°C to 10°C

Pick up the correct statement from the following: A. Rate of digestion of sludge is more at higher temperature B. Thermophilic organisms digest the sludge if the temperature ranges from 40° to 60°C C. Mesophilic organisms digest the sludge if the temperature is between 25° and 40°C D. All the above

Description : Pick up the correct statement from the following: A. Rate of digestion of sludge is more at higher temperature B. Thermophilic organisms digest the sludge if the temperature ranges from 40° to 60°C C. Mesophilic organisms digest the sludge if the temperature is between 25° and 40°C D. All the above

Last Answer : ANS: D

A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal to 50J/mole.K. The temperature rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Description : A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal ... rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Last Answer : (B) 10°C

If a certain amount of dry ice is mixed with same amount of water at 80°C, the final temperature of mixture will be  (a) 80°C  (b) 0°C  (c) 40°C  (d) 20°C  (e) 60°C.

Description : If a certain amount of dry ice is mixed with same amount of water at 80°C, the final temperature of mixture will be  (a) 80°C  (b) 0°C  (c) 40°C  (d) 20°C  (e) 60°C.

Last Answer : Answer : b

Fats are solids at (A) 10°C (B) 20°C (C) 30°C (D) 40°C

Description : Fats are solids at (A) 10°C (B) 20°C (C) 30°C (D) 40°C

Last Answer : Answer : B

The boiling point of ammonia is i. a) -10.5°C. c) -33.3°C p. b) -30°C. d) -77.7°C

Description : The boiling point of ammonia is i. a) -10.5°C. c) -33.3°C p. b) -30°C. d) -77.7°C

Last Answer : -33.3°C p.

The heat flux (from outside to inside) across an insulating wall with thermal conductivity, K = 0.04 W/m.°K and thickness 0.16m is 10 W/m2 . The temperature of the inside wall is - 5°C. The outside wall temperature is (A) 25°C (B) 30°C (C) 35°C (D) 40°C

Description : The heat flux (from outside to inside) across an insulating wall with thermal conductivity, K = 0.04 W/m.°K and thickness 0.16m is 10 W/m2 . The temperature of the inside wall is - 5°C. The outside wall temperature is (A) 25°C (B) 30°C (C) 35°C (D) 40°C

Last Answer : (C) 35°C

Unless it can be shown that a 45°C ambient temperature will not be exceeded, motors within a machinery space must be designed for an ambient temperature of _____________. A. 45°C B. 50°C C. 55°C D. 60°C

Description : Unless it can be shown that a 45°C ambient temperature will not be exceeded, motors within a machinery space must be designed for an ambient temperature of _____________. A. 45°C B. 50°C C. 55°C D. 60°C

Last Answer : Answer: B

An air-water vapour mixture has a dry bulb temperature of 60°C and a dew point temperature of 40°C. The total pressure is 101.3 kPa and the vapour pressure of water at 40°C and 60°C are 7.30 kPa and 19.91 kPa respectively. The humidity of air sample expressed as kg of water vapour/kg of dry air is: (A) 0.048 (B) 0.079 (C) 0.122 (D) 0.152

Description : An air-water vapour mixture has a dry bulb temperature of 60°C and a dew point temperature of 40°C. The total pressure is 101.3 kPa and the vapour pressure of water at 40°C and 60°C are 7.30 kPa and 19.91 kPa respectively ... air is: (A) 0.048 (B) 0.079 (C) 0.122 (D) 0.152

Last Answer : (D) 0.152

Temperature and gage pressure maintained during the manufacture of cold SBR (styrene butadiene rubber) are (A) 5°C and 1 kgf/cm2 (B) - 20°C and 1 kgf/cm2 (C) 0°C and 1 kgf/cm2 (D) 0°C and 3 kgf/cm

Description : Temperature and gage pressure maintained during the manufacture of cold SBR (styrene butadiene rubber) are (A) 5°C and 1 kgf/cm2 (B) - 20°C and 1 kgf/cm2 (C) 0°C and 1 kgf/cm2 (D) 0°C and 3 kgf/cm

Last Answer : (A) 5°C and 1 kgf/cm

Onion seeds can germinate at a temperature of : a. 0-1°C b. 1-5°C c. 5-11°C d. 15-20°C

Description : Onion seeds can germinate at a temperature of : a. 0-1°C b. 1-5°C c. 5-11°C d. 15-20°C

Last Answer : 1-5°C

Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure to the air with a wet bulb temperature of 60°C, then both the approach & the range would be 10°C (C) For unsaturated air-water vapor mixture at atmospheric conditions, the wet bulb temperature & adiabatic cooling lines are the same (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Micro-organism,which can grow at higher temperature, is called a. Mesophils b. Phycrophils c. Thermophils d. None of these

Description : Micro-organism,which can grow at higher temperature, is called a. Mesophils b. Phycrophils c. Thermophils d. None of these

Last Answer : c. Thermophils

Micro-organism,which can grow at higher temperature, is called a) Thermophils b) Mesophils c) Phycrophils d) None of these

Description : Micro-organism,which can grow at higher temperature, is called a) Thermophils b) Mesophils c) Phycrophils d) None of these

Last Answer : a) Thermophils

Lumirhodopsin is stable only at a temperature below (A) –35°C (B) –40°C (C) –45°C (D) –50°C

Description : Lumirhodopsin is stable only at a temperature below (A) –35°C (B) –40°C (C) –45°C (D) –50°C

Last Answer : Answer : D

If a D.C. motor designed for 40°C ambient temperature is to be used for 50°C ambient temperature, then the motor?

Last Answer : If a D.C. motor designed for 40°C ambient temperature is to be used for 50°C ambient temperature, then the motor is to be derated by a factor recommended by manufacturer and select the next higher H.P. motor.

The life expectancy of electrical insulation, is approximately halved for an increased operating temperature of _______________. A. 10°C B. 25°C C. 50°C D. 100°C

Description : The life expectancy of electrical insulation, is approximately halved for an increased operating temperature of _______________. A. 10°C B. 25°C C. 50°C D. 100°C

Last Answer : Answer: A

Hot water (0.01 m3 /min) enters the tube side of a counter current shell and tube heat exchanger at 80°C and leaves at 50°C. Cold oil (0.05 m3 /min) of density 800 kg/m3 and specific heat of 2 kJ/kg.K enters at 20°C. The log mean temperature difference in °C is approximately (A) 32 (B) 37 (C) 45 (D) 50

Description : Hot water (0.01 m3 /min) enters the tube side of a counter current shell and tube heat exchanger at 80°C and leaves at 50°C. Cold oil (0.05 m3 /min) of density 800 kg/m3 and specific heat of ... mean temperature difference in °C is approximately (A) 32 (B) 37 (C) 45 (D) 50

Last Answer : (A) 32

A long iron rod initially at a temperature of 20°C has one end dipped in boiling water (100°C) at time, t = 0. The curved surface of the rod is insulated so that heat conduction is one dimensional in the axial direction. The temperature at a distance 100 mm from the dipped end becomes 40°C at time, t = 200 s. The same temperature is achieved at a distance of 200 mm from the dipped end at time (A) t = 283 s (B) t = 356 s (C) t = 400 s (D) t = 800 s

Description : A long iron rod initially at a temperature of 20°C has one end dipped in boiling water (100°C) at time, t = 0. The curved surface of the rod is insulated so that heat conduction is one dimensional in the axial direction. The ... = 283 s (B) t = 356 s (C) t = 400 s (D) t = 800 s

Last Answer : (D) t = 800 s

The average temperature of sewage in India, is A. 10°C B. 15°C C. 20°C D. 25°C

Description : The average temperature of sewage in India, is A. 10°C B. 15°C C. 20°C D. 25°C

Last Answer : ANS: C

A Fahrenheit thermometer indicates a temperature of ‘ 14°F. its corresponding reading on the Celsius scale will be -----? A. – 2O°C B. – 10°C (Answer) C. + 10°C D. + 20°C

Description : A Fahrenheit thermometer indicates a temperature of ‘ 14°F. its corresponding reading on the Celsius scale will be -----? A. – 2O°C B. – 10°C (Answer) C. + 10°C D. + 20°C

Last Answer : B. – 10°C (Answer)

Date growth does not cease if temperature does not fall below: a. 0°C. b. 10°C c. 18°C d. 20°C

Description : Date growth does not cease if temperature does not fall below: a. 0°C. b. 10°C c. 18°C d. 20°C

Last Answer : 18°C

The flash point of transformer oil should be higher than (a) 40°C (b) 60°C (c) 80°C (d) 104°C

Description : The flash point of transformer oil should be higher than (a) 40°C (b) 60°C (c) 80°C (d) 104°C

Last Answer : (d) 104°C

Volatile oil are those oil which can evaporate at : a. 25°C b. 40°C c. 50°C d. 65°C

Description : Volatile oil are those oil which can evaporate at : a. 25°C b. 40°C c. 50°C d. 65°C

Last Answer : 25°C

An insulation resistance reading is taken at 20°C and found to be 10 megohms. What would you expect the resistance reading to be at 40°C? A. 2.5 megohms B. 10 megohms C. 15 megohms D. 20 megohms

Description : An insulation resistance reading is taken at 20°C and found to be 10 megohms. What would you expect the resistance reading to be at 40°C? A. 2.5 megohms B. 10 megohms C. 15 megohms D. 20 megohms

Last Answer : Answer: A

The optimum temperature for the Banana crop is— (A) 30°C (B) 23°C (C) 21•5°C (D) 26•5°C

Description : The optimum temperature for the Banana crop is— (A) 30°C (B) 23°C (C) 21•5°C (D) 26•5°C

Last Answer : (B) 23°C

Potato tuber growth is stopped at what temperature ? (a) 40°C — 42°C (b) 30°C — 32°C (c) 35°C — 37°C (d) 38°C – 40°C

Description : Potato tuber growth is stopped at what temperature ? (a) 40°C — 42°C (b) 30°C — 32°C (c) 35°C — 37°C (d) 38°C – 40°C

Last Answer : (b) 30°C — 32°C

Which of the following is the Value of Lapse Rate? [a] 6.5°C/km [b] 7.5°C/km [c] 8.5°C/km [d] 9.5°C/km [e] 5.5°C/km

Description : Which of the following is the Value of Lapse Rate? [a] 6.5°C/km [b] 7.5°C/km [c] 8.5°C/km [d] 9.5°C/km [e] 5.5°C/km

Last Answer : [d] 9.5°C/km

Biofertilizers are – 1) Organic manures 2) Green manure 3) Culture of micro-organism 4) None of these

Description : Biofertilizers are – 1) Organic manures 2) Green manure 3) Culture of micro-organism 4) None of these

Last Answer : 3) Culture of micro-organism

Who has first time seen the micro-organism? a) Robert Koch b) John Tyndall c) Antonie van Leeuwenhoek d) Louis Pasteur

Description : Who has first time seen the micro-organism? a) Robert Koch b) John Tyndall c) Antonie van Leeuwenhoek d) Louis Pasteur

Last Answer : d) Louis Pasteur

Maximum density of water exists at (a) 0°C (b) 4°C (c) 40°C (d) 100°C

Description : Maximum density of water exists at (a) 0°C (b) 4°C (c) 40°C (d) 100°C

Last Answer : (b) 4°C

The optimum cardinal temparature point for germination of rice seeds is– 1) 20°C – 25°C 2) 18°C – 22°C 3) 30°C – 32°C 4) 37°C – 39°C

Description : The optimum cardinal temparature point for germination of rice seeds is– 1) 20°C – 25°C 2) 18°C – 22°C 3) 30°C – 32°C 4) 37°C – 39°C

Last Answer : 1) 20°C – 25°C

The datum temperature for maturity by Plowman, is (A) 23°C (B) 0° (C) - 5.6°C (D) - 11.7°C

Description : The datum temperature for maturity by Plowman, is (A) 23°C (B) 0° (C) - 5.6°C (D) - 11.7°C

Last Answer : (C) - 5.6°C

Which one of the following groups of organisms is thermophilic in that they can tolerate and grow at fairly high temperatures? (a) Certain bacteria and blue-green algae (b) Loris, rhesus monkey and red kangaroo (c) Llamas, camels and yaks (d) Bison, musk-ox and racoon

Description : Which one of the following groups of organisms is thermophilic in that they can tolerate and grow at fairly high temperatures? (a) Certain bacteria and blue-green algae (b) Loris, rhesus monkey and red kangaroo (c) Llamas, camels and yaks (d) Bison, musk-ox and racoon

Last Answer : Ans:(a)

A few organisms are known to grow and multiply at temperatures of 100-105o C. They belong to (a) thermophilic sulphur bacteria (b) hot spring blue-green algae (c) methanogenic archaebacteria (d) marine archaebacteria.

Description : A few organisms are known to grow and multiply at temperatures of 100-105o C. They belong to (a) thermophilic sulphur bacteria (b) hot spring blue-green algae (c) methanogenic archaebacteria (d) marine archaebacteria.

Last Answer : (a) thermophilic sulphur bacteria

Bacteria growing at moderate temperature are — bacteria a. Thermophilic b. Mesophilic c. Psychrophilic d. None of these

Description : Bacteria growing at moderate temperature are — bacteria a. Thermophilic b. Mesophilic c. Psychrophilic d. None of these

Last Answer : b. Mesophilic

The bacteria which are able to grow at 0°C but which grow at 20°C to 30°C, are known as a. Psychrophiles b. Facultative psychrophiles c. Average psychrophiles d. Mesophiles

Description : The bacteria which are able to grow at 0°C but which grow at 20°C to 30°C, are known as a. Psychrophiles b. Facultative psychrophiles c. Average psychrophiles d. Mesophiles

Last Answer : Ans: C

A microbe that is a microaerophilic mesophile would grow optimally at and a. high 02; 30°C b. low 02; 20°C c. no 02; 30°C d. low 02; 37°C

Description : A microbe that is a microaerophilic mesophile would grow optimally at and a. high 02; 30°C b. low 02; 20°C c. no 02; 30°C d. low 02; 37°C

Last Answer : d. low 02; 37°C

The temperature of the top of a frozen lake is – 15°C. What is the temperature of the water in the lake in contact with the ice layer? (a) 0°C (b) 4°C (c) –15°C (d) –7.5°C

Description : The temperature of the top of a frozen lake is – 15°C. What is the temperature of the water in the lake in contact with the ice layer? (a) 0°C (b) 4°C (c) –15°C (d) –7.5°C

Last Answer : Ans:(a)

Pour point of a petrofuel is (A) Multiple of 3°F (B) Multiple of 5°F (C) 5°C below the temperature at which oil ceases to flow (D) None of these

Description : Pour point of a petrofuel is (A) Multiple of 3°F (B) Multiple of 5°F (C) 5°C below the temperature at which oil ceases to flow (D) None of these

Last Answer : (C) 5°C below the temperature at which oil ceases to flow

Chilling injury in plants occurs at a temperature: a. <4°C b. <5°C c. <8°C d. <9°C

Description : Chilling injury in plants occurs at a temperature: a.

Last Answer :

Which of the following environmental conditions are essential for optimum growth of Mucor on a piece of bread ? A. Temperature of about 25°C B. Temperature of about 5°C C. Relative humidity of about 5% D. Relative humidity of about 95% E. A shady place F. A brightly illuminated place Choose the answer from the following options. (a) B, C and F only (b) A, C and E only (c) A, D and E only (d) B, D and E only

Description : Which of the following environmental conditions are essential for optimum growth of Mucor on a piece of bread ? A. Temperature of about 25°C B. Temperature of about 5°C C. Relative humidity of about 5% D. Relative humidity of about 95% ... b) A, C and E only (c) A, D and E only (d) B, D and E only

Last Answer : (c) A, D and E only

Maize grow very well in the soil in p H ranging from (a) 4.5- 6.5 (b) 6- 8.5 (c) 5.5 – 7.5 (d) 7.5 – 8.5

Description : Maize grow very well in the soil in p H ranging from (a) 4.5- 6.5 (b) 6- 8.5 (c) 5.5 – 7.5 (d) 7.5 – 8.5

Last Answer : (c) 5.5 – 7.5

Match the following : [IAS 1999] A. Cotton 1. Rainfall 1000-1500 mm; Temperature 40°-60°C B. Flax 2. Rainfall 1500-2000 mm; Temperature 25°-35°C C. Sugarbeet 3. Rainfall 600-S00 mm; Temperature 5°-18°C D. Jute 4. Rainfall 500-1000 mm; Temperature 18°-22°C 5. Rainfall 500-600 mm; Temperature 18°-22°C A B C D (a) 1 3 4 2 (b) 2 3 5 4 (c) 4 5 2 1 (d) 4 3 5 2 shop.ssbcrack.com

Description : Match the following : [IAS 1999] A. Cotton 1. Rainfall 1000-1500 mm; Temperature 40°-60°C B. Flax 2. Rainfall 1500-2000 mm; Temperature 25°-35°C C. Sugarbeet 3. Rainfall 600-S00 mm; Temperature 5°-18°C D. Jute 4. Rainfall 500-1000 mm; ... 1 3 4 2 (b) 2 3 5 4 (c) 4 5 2 1 (d) 4 3 5 2 shop.ssbcrack.com

Last Answer : Ans: (d)

Polythene (low or high density) containers are not corroded by (A) Sulphuric acid (10%) at room temperature (B) Nitric acid (95%) at room temperature (C) Sulphur trioxide at 60°C (D) Any of these

Description : Polythene (low or high density) containers are not corroded by (A) Sulphuric acid (10%) at room temperature (B) Nitric acid (95%) at room temperature (C) Sulphur trioxide at 60°C (D) Any of these

Last Answer : (A) Sulphuric acid (10%) at room temperature

Determination of water content of a soil sample suspected to contain gypsum is made by drying the sample for longer period at a temperature not more than (A) 60°C (B) 80°C (C) 100°C (D) 110°C

Description : Determination of water content of a soil sample suspected to contain gypsum is made by drying the sample for longer period at a temperature not more than (A) 60°C (B) 80°C (C) 100°C (D) 110°C

Last Answer : (B) 80°C

Bacteria which need oxygen for growth are called a. Thermophilic bacteria b. Microaerophilic bacteria c. Facultative anaerobic bacteria d. Mycobacteria

Description : Bacteria which need oxygen for growth are called a. Thermophilic bacteria b. Microaerophilic bacteria c. Facultative anaerobic bacteria d. Mycobacteria

Last Answer : Ans: B

Bacteria or molds that require atmospheric oxygen are ____. a. anaerobic c. mesophilic b. aerobic d. thermophilic

Description : Bacteria or molds that require atmospheric oxygen are ____. a. anaerobic c. mesophilic b. aerobic d. thermophilic

Last Answer : b. aerobic

Microbes that prefer cold temperatures are ____. a. mesophilic c. psychrophilic b. thermophilic d. obligative

Description : Microbes that prefer cold temperatures are ____. a. mesophilic c. psychrophilic b. thermophilic d. obligative

Last Answer : c. psychrophilic