Volatile oil are those oil which can evaporate at : a. 25°C b. 40°C c. 50°C d. 65°C

Volatile oil are those oil which can evaporate at :
a. 25°C
b. 40°C
c. 50°C
d. 65°C
by

1 Answer

Answer :

25°C
by

Related questions

Which of the following are optimum temperature conditions for making benzenediazonium chloride from aniline? (a) 0°C to 10°C (b) 20°C to 25°C (c) 30°C to 40°C (d) 45°C to 50°C

Description : Which of the following are optimum temperature conditions for making benzenediazonium chloride from aniline? (a) 0°C to 10°C (b) 20°C to 25°C (c) 30°C to 40°C (d) 45°C to 50°C

Last Answer : 0°C to 10°C

Lumirhodopsin is stable only at a temperature below (A) –35°C (B) –40°C (C) –45°C (D) –50°C

Description : Lumirhodopsin is stable only at a temperature below (A) –35°C (B) –40°C (C) –45°C (D) –50°C

Last Answer : Answer : D

Lumirhodopsin is stable only at temperature below (A) –10°C (B) –20°C (C) –40°C (D) –50°C

Description : Lumirhodopsin is stable only at temperature below (A) –10°C (B) –20°C (C) –40°C (D) –50°C

Last Answer : Answer : D

Thermophilic micro-organism grow well at temperature– 1) 10°C – 20°C 2) 20°C – 40°C 3) 50°C – 60°C 4) 5°C – 7°C

Description : Thermophilic micro-organism grow well at temperature– 1) 10°C – 20°C 2) 20°C – 40°C 3) 50°C – 60°C 4) 5°C – 7°C

Last Answer : 3) 50°C – 60°C

If a D.C. motor designed for 40°C ambient temperature is to be used for 50°C ambient temperature, then the motor?

Last Answer : If a D.C. motor designed for 40°C ambient temperature is to be used for 50°C ambient temperature, then the motor is to be derated by a factor recommended by manufacturer and select the next higher H.P. motor.

The life expectancy of electrical insulation, is approximately halved for an increased operating temperature of _______________. A. 10°C B. 25°C C. 50°C D. 100°C

Description : The life expectancy of electrical insulation, is approximately halved for an increased operating temperature of _______________. A. 10°C B. 25°C C. 50°C D. 100°C

Last Answer : Answer: A

Process conditions in fermentator used for production of penicillin is (A) 25°C, 2 atm (B) 50°C, l0 atm (C) 30°C, 200 mm Hg (absolute) (D) 90°C, 45 atm

Description : Process conditions in fermentator used for production of penicillin is (A) 25°C, 2 atm (B) 50°C, l0 atm (C) 30°C, 200 mm Hg (absolute) (D) 90°C, 45 atm

Last Answer : (A) 25°C, 2 atm

The heat flux (from outside to inside) across an insulating wall with thermal conductivity, K = 0.04 W/m.°K and thickness 0.16m is 10 W/m2 . The temperature of the inside wall is - 5°C. The outside wall temperature is (A) 25°C (B) 30°C (C) 35°C (D) 40°C

Description : The heat flux (from outside to inside) across an insulating wall with thermal conductivity, K = 0.04 W/m.°K and thickness 0.16m is 10 W/m2 . The temperature of the inside wall is - 5°C. The outside wall temperature is (A) 25°C (B) 30°C (C) 35°C (D) 40°C

Last Answer : (C) 35°C

High seed germination in cucumber occurs under temperature range of: a. 20-25°C b. 25-30°C c. 15-25°C d. None of above

Description : High seed germination in cucumber occurs under temperature range of: a. 20-25°C b. 25-30°C c. 15-25°C d. None of above

Last Answer : 20-25°C

Optimum temperature for potato tuber formation is a. 20-22°C b. 25-30°C c. 22-25°C d. All of these

Description : Optimum temperature for potato tuber formation is a. 20-22°C b. 25-30°C c. 22-25°C d. All of these

Last Answer : 20-22°C

Liquids that evaporate quickly are known as _________ liquids. A. Viscous B. Transient C. Volatile D. Light

Description : Liquids that evaporate quickly are known as _________ liquids. A. Viscous B. Transient C. Volatile D. Light

Last Answer : ANSWER: C

Liquids that evaporate quickly are known as _________ liquids. A. Viscous B. Transient C. Volatile D. Light

Description : Liquids that evaporate quickly are known as _________ liquids. A. Viscous B. Transient C. Volatile D. Light

Last Answer : ANSWER: C

Temperature for LTLT pasteurization (a) 61-63°C (b) 42-49°C (c) 62-65°C (d) 51-65°C

Description : Temperature for LTLT pasteurization (a) 61-63°C (b) 42-49°C (c) 62-65°C (d) 51-65°C

Last Answer : (a) 61-63°C

Pick out the wrong statement. (A) Pensky-Marten apparatus is used for determining flash points above 50°C (B) Characterisation factor of paraffinic crude oil is more than 12 (C) Abel apparatus is used for determining flash points below 50°C (D) An oil having high susceptibility to change in viscosity with temperature changes, has a high viscosity index

Description : Pick out the wrong statement. (A) Pensky-Marten apparatus is used for determining flash points above 50°C (B) Characterisation factor of paraffinic crude oil is more than 12 (C) Abel ... An oil having high susceptibility to change in viscosity with temperature changes, has a high viscosity index

Last Answer : (D) An oil having high susceptibility to change in viscosity with temperature changes, has a high viscosity index

Hot water (0.01 m3 /min) enters the tube side of a counter current shell and tube heat exchanger at 80°C and leaves at 50°C. Cold oil (0.05 m3 /min) of density 800 kg/m3 and specific heat of 2 kJ/kg.K enters at 20°C. The log mean temperature difference in °C is approximately (A) 32 (B) 37 (C) 45 (D) 50

Description : Hot water (0.01 m3 /min) enters the tube side of a counter current shell and tube heat exchanger at 80°C and leaves at 50°C. Cold oil (0.05 m3 /min) of density 800 kg/m3 and specific heat of ... mean temperature difference in °C is approximately (A) 32 (B) 37 (C) 45 (D) 50

Last Answer : (A) 32

The flash point of transformer oil should be higher than (a) 40°C (b) 60°C (c) 80°C (d) 104°C

Description : The flash point of transformer oil should be higher than (a) 40°C (b) 60°C (c) 80°C (d) 104°C

Last Answer : (d) 104°C

The boiling point of ammonia is (a) -100°C (b) -50°C (c) - 33.3°C (d) 33.3°C.

Description : The boiling point of ammonia is (a) -100°C (b) -50°C (c) - 33.3°C (d) 33.3°C.

Last Answer : Ans: c

Unless it can be shown that a 45°C ambient temperature will not be exceeded, motors within a machinery space must be designed for an ambient temperature of _____________. A. 45°C B. 50°C C. 55°C D. 60°C

Description : Unless it can be shown that a 45°C ambient temperature will not be exceeded, motors within a machinery space must be designed for an ambient temperature of _____________. A. 45°C B. 50°C C. 55°C D. 60°C

Last Answer : Answer: B

The change in temperature of a body is 50°C. What is the change on Kelvin scale?

Description : The change in temperature of a body is 50°C. What is the change on Kelvin scale?

Last Answer : 50 K

Temperature and gage pressure maintained during the manufacture of hot SBR (styrene butadiene rubber) are (A) 50°C and 3 - 4 kg/cm2 (B) 50°C and 1 kgf/cm2 (C) 250°C and 10 kgf/cm2 (D) 250°C and 1 kgf/cm

Description : Temperature and gage pressure maintained during the manufacture of hot SBR (styrene butadiene rubber) are (A) 50°C and 3 - 4 kg/cm2 (B) 50°C and 1 kgf/cm2 (C) 250°C and 10 kgf/cm2 (D) 250°C and 1 kgf/cm

Last Answer : (A) 50°C and 3 - 4 kg/cm

Flash point of diesel/kerosene (>50°C) is determined by the (A) Abel apparatus (B) Pensky-Martens apparatus (C) Saybolt chromometer (D) None of these

Description : Flash point of diesel/kerosene (>50°C) is determined by the (A) Abel apparatus (B) Pensky-Martens apparatus (C) Saybolt chromometer (D) None of these

Last Answer : (A) Abel apparatus

The outlet temperature of cooling water in a heat exchanger is generally not allowed to exceed above 50°C in industrial practice mainly to avoid (A) Its evaporation loss (B) Excessive corrosion (C) Uneconomic LMTD (D) Decrease in heat exchanger efficiency

Description : The outlet temperature of cooling water in a heat exchanger is generally not allowed to exceed above 50°C in industrial practice mainly to avoid (A) Its evaporation loss (B) Excessive corrosion (C) Uneconomic LMTD (D) Decrease in heat exchanger efficiency

Last Answer : (B) Excessive corrosion

The figure below shows three steps (A, B, C) of Polymerase Chain Reaction (PCR). Select the option giving correct identification together with what it represents? A. B. C ds DNA 3 5 5 3 5 3 5 3 5 3 5 3 5 5 3 3 5 3 5 3 Region to be amplified . (a) B - denaturation at a temperature of about 98°C separating the two DNA strands (b) A - denaturation at a temperature of about 50°C (c) C - extension in the presence of heat stable DNA polymerase (d) A - annealing with two sets of primers

Description : The figure below shows three steps (A, B, C) of Polymerase Chain Reaction (PCR). Select the option giving correct identification together with what it represents? A. B. C ds DNA 3 5 5 3 ... - extension in the presence of heat stable DNA polymerase (d) A - annealing with two sets of primers

Last Answer : (c) C - extension in the presence of heat stable DNA polymerase

A closed system is cooled reversibly from 100°C to 50°C. If no work is done on the system (A) its internal energy (U) decreases and its entropy (S) increases (B) U and S both decreases (C) U decreases but S is constant (D) U is constant but S decreases

Description : A closed system is cooled reversibly from 100°C to 50°C. If no work is done on the system (A) its internal energy (U) decreases and its entropy (S) increases (B) U and S both decreases (C) U decreases but S is constant (D) U is constant but S decreases

Last Answer : (B) U and S both decreases

A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2 MN/mm2 , the tensile force developed at a temperature of 50°C, is (A) 80 N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option

Description : A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the  ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2  MN/mm2 , the ... N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option 

Last Answer : (C) 120 N/mm

Which of the following is not a reversible process? (A) Expansion of an ideal gas against constant pressure (B) Atmospheric pressure vaporisation of water at 100°C (C) Solution of NaCl in water at 50°C (D) None of these

Description : Which of the following is not a reversible process? (A) Expansion of an ideal gas against constant pressure (B) Atmospheric pressure vaporisation of water at 100°C (C) Solution of NaCl in water at 50°C (D) None of these

Last Answer : C) Solution of NaCl in water at 50°C

In a counter flow heat exchanger, hot fluid enters at 170°C & leaves at 150°C, while the cold fluid enters at 50°C & leaves at 70°C. The arithmetic mean temperature difference in this case is __________ °C. (A) 20 (B) 60 (C) 120 (D) ∞

Description : In a counter flow heat exchanger, hot fluid enters at 170°C & leaves at 150°C, while the cold fluid enters at 50°C & leaves at 70°C. The arithmetic mean temperature difference in this case is __________ °C. (A) 20 (B) 60 (C) 120 (D) ∞

Last Answer : (D) ∞

The turn-off time of a thyristor is 30 is at 50°C. What is its turn-off time at 100°C ?

Description : The turn-off time of a thyristor is 30 is at 50°C. What is its turn-off time at 100°C ?

Last Answer : The turn-off time of a thyristor is 30 is at 50°C. What is its turn-off time at 100°C ? 60 microsecond

Wait, what? The right thinks if they reduce federal spending then we will climb out of all our problems and all the needs that these tax dollars were meeting will evaporate?

Description : Wait, what? The right thinks if they reduce federal spending then we will climb out of all our problems and all the needs that these tax dollars were meeting will evaporate?

Last Answer : answer:No, no, no. That would just be pushing the problem down so congress can look good playing high and mighty and not have to deal with it or the peeved, headache inducing, voters. ... , you die, whichever. Please avoid standing in the sarcasm for prolonged periods, it may prove disorientating.

Chemistry Q: Will adding a little bit of soap to water make it evaporate slower or faster?

Description : Chemistry Q: Will adding a little bit of soap to water make it evaporate slower or faster?

Last Answer : Don’t quote me, but I think it evaporates more slowly? Someone else will correct me or explain better.

What in the brain/body or the Universe around it helps determine which memories to retain long-term and which to let 'evaporate' with time?

Description : What in the brain/body or the Universe around it helps determine which memories to retain long-term and which to let 'evaporate' with time?

Last Answer : No need to yell. :)

Over time, a black hole will evaporate via a process called Hawking radiation. How long will it take for the M87 black hole to fully evaporate? -Space

Description : Over time, a black hole will evaporate via a process called Hawking radiation. How long will it take for the M87 black hole to fully evaporate? -Space

Last Answer : A supermassive black hole with a mass of 1011 (100 billion) M ☉ will evaporate in around 2 10100 years. Some monster black holes in the universe are predicted to continue to grow up to ... the collapse of superclusters of galaxies. Even these would evaporate over a timescale of up to 10106 years.

What energy source help's evaporate water from earth's surface in the water cycle?

Description : What energy source help's evaporate water from earth's surface in the water cycle?

Last Answer : The sun

What if you put water in a dark colored container and a light color container which one will evaporate first?

Description : What if you put water in a dark colored container and a light color container which one will evaporate first?

Last Answer : i don't think the color matter

Why does the sweat on your skin evaporate?

Description : Why does the sweat on your skin evaporate?

Last Answer : Sweating is designed to cool down the body by evaporation. Body heat, heat from the Sun, currents of air, direct blowing by the wind, will quickly evaporate the sweat. The same principle is the wet clothes on a washing line will dry quicker on a warm, windy day.

What energy source helps evaporate water from the earths surface in the water cycle?

Description : What energy source helps evaporate water from the earths surface in the water cycle?

Last Answer : sun

What Energy used to evaporate water?

Description : What Energy used to evaporate water?

Last Answer : latent heat

Do liquid soap dispensers cause the soap to evaporate?

Description : Do liquid soap dispensers cause the soap to evaporate?

Last Answer : Liquid soap dispenser don't cause the soap to evaporte. Sometimes the soap will leak out on accident however.

Why should you not evaporate all of the water from the copper sulfate solution, when making salts?

Description : Why should you not evaporate all of the water from the copper sulfate solution, when making salts?

Last Answer : it can also causes a chemical reaction which can kill you if it gets through any, yes any hole in your body, so pedos beware

Critical temperature is' the temperature above which (a) a gas will never liquefy (b) a gas will immediately liquefy (c) water will evaporate (d) water will never evaporate

Description : Critical temperature is' the temperature above which (a) a gas will never liquefy (b) a gas will immediately liquefy (c) water will evaporate (d) water will never evaporate

Last Answer : Ans: a

The dew point is the: a. Dry bulb temperature on a psychrometer b. Temperature at which water vapour will start to be absorbed into the air c. Temperature below which water vapour will start to condense out of the air d. Pressure below which water vapour will start to condense out of the air e. Temperature at which water will start to evaporate

Description : The dew point is the: a. Dry bulb temperature on a psychrometer b. Temperature at which water vapour will start to be absorbed into the air c. Temperature below which water vapour will start to ... vapour will start to condense out of the air e. Temperature at which water will start to evaporate

Last Answer : Answer: C

Dew point can be best defined as the: a. Absolute temperature at which air, upon heating, will evaporate moisture b. . Percentage of moisture that air can hold at a given temperature and pressure c. . Temperature that air will begin to evaporate moisture d. . Temperature at which air, upon cooling, becomes saturated, causing moisture to condense should the temperature drop further e. . Atmospheric pressure at which air will condense moisture

Description : Dew point can be best defined as the: a. Absolute temperature at which air, upon heating, will evaporate moisture b. . Percentage of moisture that air can hold at a given temperature ... to condense should the temperature drop further e. . Atmospheric pressure at which air will condense moisture

Last Answer : Answer: D

95% (by volume) of LPG at 760 mm Hg pressure will evaporate at__________ °C.(A) 2(B) -40(C) 30(D) 55

Description : 95% (by volume) of LPG at 760 mm Hg pressure will evaporate at__________ °C. (A) 2 (B) -40 (C) 30 (D) 55

Last Answer : (A) 2

One kilogram of water at 0°C is changed to superheated steam of one atm pressure and 300° C. The major heat consumption in the process will be to (A) Heat the water from 0°C to 100°C (B) Evaporate the water (C) To superheat the steam (D) Data insufficient, can't be predicted

Description : One kilogram of water at 0°C is changed to superheated steam of one atm pressure and 300° C. The major heat consumption in the process will be to (A) Heat the water from 0°C to 100°C (B) Evaporate the water (C) To superheat the steam (D) Data insufficient, can't be predicted

Last Answer : (B) Evaporate the water

Liquid ammonia is not used as such a fertiliser in tropical countries like India, because (A) Its N2 content is very low (B) It is very costly (C) It will evaporate on spraying (D) It is not available

Description : Liquid ammonia is not used as such a fertiliser in tropical countries like India, because (A) Its N2 content is very low (B) It is very costly (C) It will evaporate on spraying (D) It is not available

Last Answer : (C) It will evaporate on spraying

On application of pressure to the equilibrium system, ice ⇌ water; which of the following phenomenon will occur? (A) Water will evaporate (B) Equilibrium will not be attained (C) More ice will be formed (D) More water will be formed

Description : On application of pressure to the equilibrium system, ice ⇌ water; which of the following phenomenon will occur? (A) Water will evaporate (B) Equilibrium will not be attained (C) More ice will be formed (D) More water will be formed

Last Answer : (D) More water will be formed

Ethers are kept in brown bottles because (a) Brown bottles are cheaper than colorless clear bottles (b) Ethers absorb moisture(c) Ethers evaporate readily(d) Ethers are oxidized to explosive peroxides

Description : Ethers are kept in brown bottles because (a) Brown bottles are cheaper than colorless clear bottles (b) Ethers absorb moisture (c) Ethers evaporate readily (d) Ethers are oxidized to explosive peroxides

Last Answer : Ethers are oxidized to explosive peroxides

Water does not evaporate, if [Stenographer

Description : Water does not evaporate, if [Stenographer

Last Answer : Humidity