Which area is used in case of heat flow by conduction through a cylinder? (A) Logarithmic mean area (B) Arithmetic mean area (C) Geometric mean area (D) None of these

Which area is used in case of heat flow by conduction through a
cylinder?
(A) Logarithmic mean area
(B) Arithmetic mean area
(C) Geometric mean area
(D) None of these
by

1 Answer

Answer :

(A) Logarithmic mean area
by

Related questions

In case of heat transfer by conduction in a hollow cylinder, __________ mean area is used to calculate the heat transfer rate. (A) Geometric (B) Arithmetic (C) Logarithmic (D) Either (A), (B) or (C)

Description : In case of heat transfer by conduction in a hollow cylinder, __________ mean area is used to calculate the heat transfer rate. (A) Geometric (B) Arithmetic (C) Logarithmic (D) Either (A), (B) or (C)

Last Answer : (C) Logarithmic

For heat flow through very thick walled cylinder, use _________mean radius. (A) Arithmetic (B) Logarithmic (C) Geometric (D) Either (A) or (C)

Description : For heat flow through very thick walled cylinder, use _________mean radius. (A) Arithmetic (B) Logarithmic (C) Geometric (D) Either (A) or (C)

Last Answer : (B) Logarithmic

Arithmetic mean area can be used in heat transfer problem to calculate the heat flow by conduction through a cylinder which is (A) Thin walled having the value of Ao Ai /< 2 (B) Thick walled (C) Having the value of Ao /Ai > 2 (D) Both (B) and (C)

Description : Arithmetic mean area can be used in heat transfer problem to calculate the heat flow by conduction through a cylinder which is (A) Thin walled having the value of Ao Ai /< 2 (B) Thick walled (C) Having the value of Ao /Ai > 2 (D) Both (B) and (C)

Last Answer : (A) Thin walled having the value of Ao Ai /< 2

In the equation Q = UAΔt; Δt is (A) Geometric mean temperature difference (B) Arithmetic mean temperature difference (C) Logarithmic mean temperature difference (D) The difference of average bulk temperatures of hot and cold fluids

Description : In the equation Q = UAΔt; Δt is (A) Geometric mean temperature difference (B) Arithmetic mean temperature difference (C) Logarithmic mean temperature difference (D) The difference of average bulk temperatures of hot and cold fluids

Last Answer : (C) Logarithmic mean temperature difference

A two stage compressor is used to compress an ideal gas. The gas is cooled to the initial temperature after each stage. The intermediate pressure for the minimum total work requirement should be equal to the __________ mean of P1 and P2.(where, P1 and P2 are initial and final pressures respectively) (A) Logarithmic (B) Arithmetic (C) Geometric (D) Harmonic

Description : A two stage compressor is used to compress an ideal gas. The gas is cooled to the initial temperature after each stage. The intermediate pressure for the minimum total work requirement should be equal to ... final pressures respectively) (A) Logarithmic (B) Arithmetic (C) Geometric (D) Harmonic

Last Answer : (C) Geometric

Pick out the correct statement. (A) Higher is the temperature of the radiating body, higher is the wavelength of radiation (B) Logarithmic mean area is used for calculating the heat flow rate through a thick walled cylinder (C) The wavelength corresponding to maximum mono-chromatic emissive power increases with rise in temperature (D) Solid angle subtended by the finite surface at the radiating element is called the angle of incidence

Description : Pick out the correct statement. (A) Higher is the temperature of the radiating body, higher is the wavelength of radiation (B) Logarithmic mean area is used for calculating the heat flow rate ... ) Solid angle subtended by the finite surface at the radiating element is called the angle of incidence

Last Answer : (B) Logarithmic mean area is used for calculating the heat flow rate through a thick walled cylinder

For minimum work input in a two stage compression process the intermediated pressure is the A. Arithmetic process of suction and discharge pressure B. Logarithmic mean of suction and discharge pressure C. Geometric mean of suction and discharge pressure D. Hyperbolic mean of suction and discharge

Description : For minimum work input in a two stage compression process the intermediated pressure is the A. Arithmetic process of suction and discharge pressure B. Logarithmic mean of suction and discharge pressure C. Geometric mean of suction and discharge pressure D. Hyperbolic mean of suction and discharge

Last Answer : ANSWER : C

Terminal point temperature differences between fluids in case of a heat exchanger is termed as (A) Approach (B) Log mean temperature difference (C) Arithmetic mean temperature difference (D) Geometric mean temperature difference

Description : Terminal point temperature differences between fluids in case of a heat exchanger is termed as (A) Approach (B) Log mean temperature difference (C) Arithmetic mean temperature difference (D) Geometric mean temperature difference

Last Answer : (A) Approach

The transitional middle portion of a logistic curve follows (A) A geometric growth (B) A logarithmic growth (C) A first over curve (D) A constant rate

Description : The transitional middle portion of a logistic curve follows (A) A geometric growth (B) A logarithmic growth (C) A first over curve (D) A constant rate

Last Answer : (D) A constant rate

In a counter flow heat exchanger, hot fluid enters at 170°C & leaves at 150°C, while the cold fluid enters at 50°C & leaves at 70°C. The arithmetic mean temperature difference in this case is __________ °C. (A) 20 (B) 60 (C) 120 (D) ∞

Description : In a counter flow heat exchanger, hot fluid enters at 170°C & leaves at 150°C, while the cold fluid enters at 50°C & leaves at 70°C. The arithmetic mean temperature difference in this case is __________ °C. (A) 20 (B) 60 (C) 120 (D) ∞

Last Answer : (D) ∞

Sauter mean diameter is the same as the __________ mean diameter. (A) Mass (B) Arithmetic (C) Volume-surface (D) Geometric

Description : Sauter mean diameter is the same as the __________ mean diameter. (A) Mass (B) Arithmetic (C) Volume-surface (D) Geometric

Last Answer : (C) Volume-surface

case of condensers & evaporators operating under given terminal conditions, LMTD (logarithmic mean temperature difference) for counter flow as compared to that for parallel flow is (A) More (B) Less (C) Equal (D) Much more

Description : case of condensers & evaporators operating under given terminal conditions, LMTD (logarithmic mean temperature difference) for counter flow as compared to that for parallel flow is (A) More (B) Less (C) Equal (D) Much more

Last Answer : Option C

In case of heat flow by conduction for a cylindrical body with an internal heat source, the nature of temperature distribution is (A) Linear (B) Hyperbolic (C) Parabolic (D) None of these

Description : In case of heat flow by conduction for a cylindrical body with an internal heat source, the nature of temperature distribution is (A) Linear (B) Hyperbolic (C) Parabolic (D) None of these

Last Answer : (C) Parabolic

According to Malthusian theory of population - (1) Population increases in geometric ratio, food supply increases in arithmetic ratio (2) Population increases in arithmetic ratio, food supply increases in geometric ratio (3) Population increases in a harmonic mean, food supply increases in geometric ratio (4) Population increases in a harmonic ratio, food supply increases in a arithmetic ratio

Description : According to Malthusian theory of population - (1) Population increases in geometric ratio, food supply increases in arithmetic ratio (2) Population increases in arithmetic ratio, food supply increases in ... (4) Population increases in a harmonic ratio, food supply increases in a arithmetic ratio

Last Answer : (1) Population increases in geometric ratio, food supply increases in arithmetic ratio Explanation: In his 1798 work, An Essay on the Principle of Population, Malthus ermined the relationship between population ... e. by the repeated addition of a uniform increment in each uniform interval of time).

When a vertical wall is subjected to pressures due to liquid on both sides, the resultant pressure is the __________ of the two pressures. (A) Sum (B) Difference (C) Arithmetic mean (D) Geometric mean

Description : When a vertical wall is subjected to pressures due to liquid on both sides, the resultant pressure is the __________ of the two pressures. (A) Sum (B) Difference (C) Arithmetic mean (D) Geometric mean

Last Answer : Answer: Option B

To calculate index number ----- mean is used (a) arithmetic (b) geometric © harmonic (d) none of the above.

Description : To calculate index number ----- mean is used (a) arithmetic (b) geometric © harmonic (d) none of the above.

Last Answer : (b) geometric

According to Malthusian theory of population (1) Population increases in geometric ratio, food supply increases in arithmetic ratio (2) Population increases in arithmetic ratio, food supply increases in geometric ratio (3) Population increases in a harmonic mean, food supply increases in geometric ratio (4) Population increases in a harmonic ratio, food supply increases in a arithmetic ratio

Description : According to Malthusian theory of population (1) Population increases in geometric ratio, food supply increases in arithmetic ratio (2) Population increases in arithmetic ratio, food supply increases in ... (4) Population increases in a harmonic ratio, food supply increases in a arithmetic ratio 

Last Answer : Population increases in geometric ratio, food supply increases in arithmetic ratio

Difference between geometric and arithmetic growth? -Biology

Description : Difference between geometric and arithmetic growth? -Biology

Last Answer : answer:

Which explains why the sequence 216 12 23 is arithmetic or geometric?

Description : Which explains why the sequence 216 12 23 is arithmetic or geometric?

Last Answer : The sequence 216 12 23 is neither arithmetic nor geometric.

Resistance to heat flow by conduction is proportional to (where, t & ρ are thickness & density of the material respectively and A = area normal tothe direction of heat flow.) (A) t (B) 1/ρ (C) 1/A (D) All (A), (B) & (C)

Description : Resistance to heat flow by conduction is proportional to (where, t & ρ are thickness & density of the material respectively and A = area normal tothe direction of heat flow.) (A) t (B) 1/ρ (C) 1/A (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Heat transfer in the laminar sub-layer in case of a liquid flowing through a pipe, is mostly by (A) Eddies current (B) Conduction (C) Convection (D) None of these

Description : Heat transfer in the laminar sub-layer in case of a liquid flowing through a pipe, is mostly by (A) Eddies current (B) Conduction (C) Convection (D) None of these

Last Answer : (B) Conduction

The velocity profile for turbulent flow through a closed conduit is (A) Logarithmic (B) Parabolic (C) Hyperbolic (D) Linear

Description : The velocity profile for turbulent flow through a closed conduit is (A) Logarithmic (B) Parabolic (C) Hyperbolic (D) Linear

Last Answer : (A) Logarithmic

In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder (C) Velocity profile varies hyperbolically and the shear stress remains constant over the cross-section (D) Average flow occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Description : In case of laminar flow of fluid through a circular pipe, the (A) Shear stress over the cross-section is proportional to the distance from the surface of the pipe (B) Surface of velocity distribution is a ... occurs at a radial distance of 0.5 r from the centre of the pipe (r = pipe radius)

Last Answer : (B) Surface of velocity distribution is a paraboloid of revolution, whose volume equals half the volume of circumscribing cylinder

The overall resistance for heat transfer through a series of flat resistance, is the __________ of the resistances. (A) Average (B) Geometric mean (C) Product (D) Sum

Description : The overall resistance for heat transfer through a series of flat resistance, is the __________ of the resistances. (A) Average (B) Geometric mean (C) Product (D) Sum

Last Answer : (D) Sum

In the following geometric primitives. which is not a solid entity of CSG modelling: a.Box b.Cone c.Cylinder d.Circle

Description : In the following geometric primitives. which is not a solid entity of CSG modelling: a.Box b.Cone c.Cylinder d.Circle

Last Answer : d.Circle

Pick out the wrong statement. (A) Fluid movement under the influence of buoyant forces resulting from change in density takes place in case of natural convection (B) The ratio NNu /NRe . Npr is called the Stanton number (C) The Peclet number is a measure of the ratio of energy transport by convection to that by conduction (D) The Colburn jH factor for heat transfer is given by Nst Npr

Description : Pick out the wrong statement. (A) Fluid movement under the influence of buoyant forces resulting from change in density takes place in case of natural convection (B) The ratio NNu /NRe . Npr is ... convection to that by conduction (D) The Colburn jH factor for heat transfer is given by Nst Npr

Last Answer : (D) The Colburn jH factor for heat transfer is given by Nst Npr

Heat transfer by __________ is almost absent in case of fluidised bed drying operation. (A) Radiation (B) Conduction (C) Convection (D) Both (B) & (C)

Description : Heat transfer by __________ is almost absent in case of fluidised bed drying operation. (A) Radiation (B) Conduction (C) Convection (D) Both (B) & (C)

Last Answer : A) Radiation

Unsteady state heat conduction occurs, when (A) Temperature distribution is independent of time (B) Temperature distribution is dependent on time (C) Heat flows in one direction only (D) Three dimensional heat flow is concerned

Description : Unsteady state heat conduction occurs, when (A) Temperature distribution is independent of time (B) Temperature distribution is dependent on time (C) Heat flows in one direction only (D) Three dimensional heat flow is concerned

Last Answer : (B) Temperature distribution is dependent on time

Steady state one dimensional heat flow by conduction as given by Fourier's low does not assume that (A) There is no internal heat generation (B) Boundary surfaces are isothermal (C) Material is anisotropic (D) Constant temperature gradient exists

Description : Steady state one dimensional heat flow by conduction as given by Fourier's low does not assume that (A) There is no internal heat generation (B) Boundary surfaces are isothermal (C) Material is anisotropic (D) Constant temperature gradient exists

Last Answer : (C) Material is anisotropic

In pipe flow, heat is transferred from hot wall to the liquid by(A) Conduction only (B) Forced convection only (C) Forced convection and conduction (D) Free and forced convection

Description : In pipe flow, heat is transferred from hot wall to the liquid by(A) Conduction only (B) Forced convection only (C) Forced convection and conduction (D) Free and forced convection

Last Answer : (C) Forced convection and conduction

For turbulent flow in smooth circular pipe, the velocity distribution is a function of the distance 'd' measured from the wall of the pipe and the friction velocity 'v', and it follows a __________ relationship. (A) Logarithmic (B) Linear (C) Hyperbolic (D) Parabolic

Description : For turbulent flow in smooth circular pipe, the velocity distribution is a function of the distance 'd' measured from the wall of the pipe and the friction velocity 'v', and it follows a __________ relationship. (A) Logarithmic (B) Linear (C) Hyperbolic (D) Parabolic

Last Answer : (A) Logarithmic

For laminar flow of Newtonian fluid in a circular pipe, the velocitydistribution is a function of the distance 'd' measured from the centre line ofthe pipe, and it follows a __________ relationship.(A) Logarithmic(B) Parabolic(C) Hyperbolic(D) Linear

Description : For laminar flow of Newtonian fluid in a circular pipe, the velocitydistribution is a function of the distance 'd' measured from the centre line of the pipe, and it follows a __________ relationship. (A) Logarithmic (B) Parabolic (C) Hyperbolic (D) Linear

Last Answer : (B) Parabolic

For conduction of heat, the instantaneous rate of heat flow is product of three factors. What are these ?

Description : For conduction of heat, the instantaneous rate of heat flow is product of three factors. What are these ?

Last Answer : Area of the section of the heat flow path, perpendicular to the direction of heat flow. temperature gradient, i.e. change of temperature w.r.t. length of path. Thermal conductivity of material.

The movement of soil heat take place mainly by — a. Diffusion b. Conduction c. Mass flow d. Diurnal variation

Description : The movement of soil heat take place mainly by — a. Diffusion b. Conduction c. Mass flow d. Diurnal variation

Last Answer : b. Conduction

A process in which heat energy is transferred by the flow of fluid.  a. Convection  b. Conduction  c. Radiation  d. Sublimation

Description : A process in which heat energy is transferred by the flow of fluid.  a. Convection  b. Conduction  c. Radiation  d. Sublimation

Last Answer : Convection

Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for counter flow and parallel flow can be theoretically same when any one of the fluids (hot or cold fluid) passes through the heat exchanger at constant temperature (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs (D) Phase change in case of a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Description : Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for ... a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Last Answer : (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs

Power is __________. A. actual amount of power reference to 1mW B. logarithmic ratio of two powers C. definite amount of energy per time period D. current flow per time period

Description : Power is __________. A. actual amount of power reference to 1mW B. logarithmic ratio of two powers C. definite amount of energy per time period D. current flow per time period

Last Answer : C. definite amount of energy per time period

Heat transfer by conduction in the turbulent core of a fluid flowing through a heated pipe is negligible, if the value of Prandtl number is (A) 0.2 (B) 0.4 (C) 0.6 (D) 0.8

Description : Heat transfer by conduction in the turbulent core of a fluid flowing through a heated pipe is negligible, if the value of Prandtl number is (A) 0.2 (B) 0.4 (C) 0.6 (D) 0.8

Last Answer : (C) 0.6

Capacity of a hydraulic accumulator is defined in terms of maximum (A) Amount of energy stored (B) Flow rate through accumulator(C) Rate of falling of ram(D) Volume available in the cylinder

Description : Capacity of a hydraulic accumulator is defined in terms of maximum (A) Amount of energy stored (B) Flow rate through accumulator (C) Rate of falling of ram (D) Volume available in the cylinder

Last Answer : (A) Amount of energy stored

The term "laminar flow" is most often associated with the description of: w) conduction of sound by waves x) current flow in transistors y) effects of viscosity of liquids z) passage of light rays through a liquid

Description : The term "laminar flow" is most often associated with the description of: w) conduction of sound by waves x) current flow in transistors y) effects of viscosity of liquids z) passage of light rays through a liquid

Last Answer : ANSWER: Y -- EFFECTS OF VISCOSITY OF LIQUIDS

The relation between specises richness and area is described on a logarithmic scale by the equation [where S = species richness, A = area, Z = slope o

Description : The relation between specises richness and area is described on a logarithmic scale by the equation [where S = species richness, A = area, Z = slope o

Last Answer : The relation between specises richness and area is described on a logarithmic scale by the equation [where S = species ... D. log S = log C + Z log A

By what process is heat transmitted from the filament of an evacuated electric bulb to the glass? (a) Conduction (b) Convection (c) Radiation (d) Heat cannot be transmitted through vacuum

Description : By what process is heat transmitted from the filament of an evacuated electric bulb to the glass? (a) Conduction (b) Convection (c) Radiation (d) Heat cannot be transmitted through vacuum

Last Answer : Ans:(c)

Transfer of heat energy from a heater coil to the cooking vessel takes place through the process of- (1) Convection only (2) Conduction and convection only (3) Radiation and convection only (4) Convection, conduction and radiation

Description : Transfer of heat energy from a heater coil to the cooking vessel takes place through the process of- (1) Convection only (2) Conduction and convection only (3) Radiation and convection only (4) Convection, conduction and radiation

Last Answer : (3) Radiation and convection only Explanation: Conduction is the transfer of heat energy by direct contact, convection is the movement of heat by actual motion of matter; radiation is the transfer of energy with the help of electromagnetic waves.

Heat is transmitted from higher temperature to lower temperature through the actual motion of the molecules in – (1) Conduction (2) Convection (3) Radiation (4) Both conduction and convection

Description : Heat is transmitted from higher temperature to lower temperature through the actual motion of the molecules in – (1) Conduction (2) Convection (3) Radiation (4) Both conduction and convection

Last Answer : (2) Convection Explanation: The process of heat transfer from one place to an-other place without the movement of particles is called conduction Example: Heat transfer through Metal rods. On the ... heated particles of the substance. The fluids (liquids and gases) are heated by this process.

Heat is transmitted from higher temperature to lower temperature through the actual motion of the molecules in - (1) Conduction (2) Convection (3) Radiation (4) Both conduction and convection

Description : Heat is transmitted from higher temperature to lower temperature through the actual motion of the molecules in - (1) Conduction (2) Convection (3) Radiation (4) Both conduction and convection

Last Answer : (2) Convection Explanation: The process of heat transfer from one place to another place without the movement of particles is called conduction,

A process by which heat is transferred through a material without a bulk movement of the material.  a. Convection  b. Conduction  c. Radiation  d. Emission

Description : A process by which heat is transferred through a material without a bulk movement of the material.  a. Convection  b. Conduction  c. Radiation  d. Emission

Last Answer : Conduction

Heat is transmitted from higher temperature to lower temperature through the actual motion of the molecules in (1) Conduction (2) Convection (3) Radiation (4) Both conduction and convection

Description : Heat is transmitted from higher temperature to lower temperature through the actual motion of the molecules in (1) Conduction (2) Convection (3) Radiation (4) Both conduction and convection

Last Answer : Convection

A long iron rod initially at a temperature of 20°C has one end dipped in boiling water (100°C) at time, t = 0. The curved surface of the rod is insulated so that heat conduction is one dimensional in the axial direction. The temperature at a distance 100 mm from the dipped end becomes 40°C at time, t = 200 s. The same temperature is achieved at a distance of 200 mm from the dipped end at time (A) t = 283 s (B) t = 356 s (C) t = 400 s (D) t = 800 s

Description : A long iron rod initially at a temperature of 20°C has one end dipped in boiling water (100°C) at time, t = 0. The curved surface of the rod is insulated so that heat conduction is one dimensional in the axial direction. The ... = 283 s (B) t = 356 s (C) t = 400 s (D) t = 800 s

Last Answer : (D) t = 800 s

The Fourier number (defined as a.t/L 2 ) is used in the analysis of problem involving heat transfer by (A) Forced convection (B) Natural convection(C) Transient conduction(D) Steady state conduction

Description : The Fourier number (defined as a.t/L 2 ) is used in the analysis of problem involving heat transfer by (A) Forced convection (B) Natural convection (C) Transient conduction (D) Steady state conduction

Last Answer : (C) Transient conduction