case of condensers & evaporators operating under given terminal conditions, LMTD (logarithmic mean temperature difference) for counter flow as compared to that for parallel flow is (A) More (B) Less (C) Equal (D) Much more

case of condensers & evaporators operating under given terminal
conditions, LMTD (logarithmic mean temperature difference) for counter
flow as compared to that for parallel flow is
(A) More
(B) Less
(C) Equal
(D) Much more
by

1 Answer

Answer :

Option C
by

Related questions

LMTD for evaporators & condensers for a given terminal parameters & set of conditions for counter-flow is equal to that for parallel flow. In such heat exchangers, with one of the fluids condensing or evaporating, the surface area required is the least in the __________ flow. (A) Parallel (B) Mixed (C) Counter flow (D) Same in either 'a', b' or 'c'

Description : LMTD for evaporators & condensers for a given terminal parameters & set of conditions for counter-flow is equal to that for parallel flow. In such heat exchangers, with one of the fluids condensing or evaporating, the surface ... Parallel (B) Mixed (C) Counter flow (D) Same in either 'a', b' or 'c'

Last Answer : (D) Same in either 'a', b' or 'c'

In counter flow compared to parallel flow, (A) LMTD is greater (B) Less surface area is required for a given heat transfer rate (C) Both (A) and (B) (D) More surface area is required for a given heat transfer rate

Description : In counter flow compared to parallel flow, (A) LMTD is greater (B) Less surface area is required for a given heat transfer rate (C) Both (A) and (B) (D) More surface area is required for a given heat transfer rate

Last Answer : (C) Both (A) and (B)

Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for counter flow and parallel flow can be theoretically same when any one of the fluids (hot or cold fluid) passes through the heat exchanger at constant temperature (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs (D) Phase change in case of a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Description : Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for ... a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Last Answer : (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs

LMTD for counter-flow and parallel flow heat exchanger will be the same, when the (A) Cold fluid is heated to a certain temperature by condensing steam (isothermal fluid) (B) Outlet temperature of both the hot and cold fluid are same (C) Outlet temperature of hot fluid is less than the outlet temperature of the cold fluid (D) None of these

Description : LMTD for counter-flow and parallel flow heat exchanger will be the same, when the (A) Cold fluid is heated to a certain temperature by condensing steam (isothermal fluid) (B) Outlet temperature of ... temperature of hot fluid is less than the outlet temperature of the cold fluid (D) None of these

Last Answer : (A) Cold fluid is heated to a certain temperature by condensing steam (isothermal fluid)

The capacity of double-effect evaporator is less than half of the capacity of two single effects, each of which is operating over same terminal temperature difference, when the (A) Solution has an elevation of boiling point (B) Evaporators operate under vacuum (C) Evaporators operate at atmospheric pressure (D) None of these

Description : The capacity of double-effect evaporator is less than half of the capacity of two single effects, each of which is operating over same terminal temperature difference, when the (A) Solution has ... B) Evaporators operate under vacuum (C) Evaporators operate at atmospheric pressure (D) None of these

Last Answer : (A) Solution has an elevation of boiling point

In a liquid-liquid heat exchanger, for the same process temperature, the ratio of the LMTD in parallel flow to the LMTD in counter flow is always (A) < 1 (B) > 1 (C) 1 (D) ∞

Description : In a liquid-liquid heat exchanger, for the same process temperature, the ratio of the LMTD in parallel flow to the LMTD in counter flow is always (A) < 1 (B) > 1 (C) 1 (D) ∞

Last Answer : (A) < 1

Correction is applied to LMTD for __________ flow. (A) Parallel (B) Counter (C) Cross (D) None of these

Description : Correction is applied to LMTD for __________ flow. (A) Parallel (B) Counter (C) Cross (D) None of these

Last Answer : (C) Cross

In a parallel flow heat exchanger, if the outlet temperature of hot and cold fluids are the same, then the log mean temperature difference (LMTD) is (A) Minimum (B) Maximum (C) Zero (D) Infinity

Description : In a parallel flow heat exchanger, if the outlet temperature of hot and cold fluids are the same, then the log mean temperature difference (LMTD) is (A) Minimum (B) Maximum (C) Zero (D) Infinity

Last Answer : (C) Zero

Parallel straight line pattern of temperature distribution for both hot and cold fluids is observed in case of heat exchanger of the type (A) Parallel flow with equal heat capacities (B) Counter flow with equal heat capacities (C) Counter flow with unequal heat capacities (D) Parallel flow with unequal heat capacities

Description : Parallel straight line pattern of temperature distribution for both hot and cold fluids is observed in case of heat exchanger of the type (A) Parallel flow with equal heat capacities (B) Counter ... (C) Counter flow with unequal heat capacities (D) Parallel flow with unequal heat capacities

Last Answer : (B) Counter flow with equal heat capacities

For the same terminal conditions and valve size, the pressure drop in a fully opened globe valve as compared to that in a gate valve is (A) More (B) Less (C) Equal (D) Either (A) or (B); depends on the viscosity of the fluid

Description : For the same terminal conditions and valve size, the pressure drop in a fully opened globe valve as compared to that in a gate valve is (A) More (B) Less (C) Equal (D) Either (A) or (B); depends on the viscosity of the fluid

Last Answer : (A) More

In a counter flow heat exchanger, hot fluid enters at 170°C & leaves at 150°C, while the cold fluid enters at 50°C & leaves at 70°C. The arithmetic mean temperature difference in this case is __________ °C. (A) 20 (B) 60 (C) 120 (D) ∞

Description : In a counter flow heat exchanger, hot fluid enters at 170°C & leaves at 150°C, while the cold fluid enters at 50°C & leaves at 70°C. The arithmetic mean temperature difference in this case is __________ °C. (A) 20 (B) 60 (C) 120 (D) ∞

Last Answer : (D) ∞

A stirred tank reactor compared to tubular-flow reactor provides (A) More uniform operating conditions (B) Permits operation at the optimum temperature for a long reaction time (C) Higher overall selectivity for a first order consecutive reaction (D) All (A), (B) and (C

Description : A stirred tank reactor compared to tubular-flow reactor provides (A) More uniform operating conditions (B) Permits operation at the optimum temperature for a long reaction time (C) Higher overall selectivity for a first order consecutive reaction (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

A 2-4 heat exchanger involves (A) Only counter-flow of fluids (B) Only parallel-flow of fluids (C) Both counter and parallel-flow of the fluids (D) Smaller pressure drop compared to 1-2 exchanger

Description : A 2-4 heat exchanger involves (A) Only counter-flow of fluids (B) Only parallel-flow of fluids (C) Both counter and parallel-flow of the fluids (D) Smaller pressure drop compared to 1-2 exchanger

Last Answer : (C) Both counter and parallel-flow of the fluids

In a 1-1 concurrent heat exchanger, if the tube side fluid outlet temperature is equal to the shell side fluid outlet temperature, then the LMTD is (A) ∞ (B) 0 (C) Equal to the difference between hot and cold fluids inlet temperature (D) Equal to the difference between hot fluid inlet temperature and cold fluid outlet temperature

Description : In a 1-1 concurrent heat exchanger, if the tube side fluid outlet temperature is equal to the shell side fluid outlet temperature, then the LMTD is (A) ∞ (B) 0 ... temperature (D) Equal to the difference between hot fluid inlet temperature and cold fluid outlet temperature

Last Answer : (B) 0

In case of parallel flow heat exchanger, the lowest temperature theoretically attainable by the hot fluid is __________ the outlet temperature of the cold fluid. (A) Equal to (B) More than (C) Less than (D) Either more or less than (depending upon the fluid)

Description : In case of parallel flow heat exchanger, the lowest temperature theoretically attainable by the hot fluid is __________ the outlet temperature of the cold fluid. (A) Equal to (B) More than (C) Less than (D) Either more or less than (depending upon the fluid)

Last Answer : (A) Equal to

Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger calculations (Δt) weighted is used in place of Δt, when it involves more than one sequence of heating or cooling i.e., desuperheating & condensation or condensation & sub-cooling (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted (D) In case of short tube vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Description : Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger ... vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Last Answer : (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted

Which area is used in case of heat flow by conduction through a cylinder? (A) Logarithmic mean area (B) Arithmetic mean area (C) Geometric mean area (D) None of these

Description : Which area is used in case of heat flow by conduction through a cylinder? (A) Logarithmic mean area (B) Arithmetic mean area (C) Geometric mean area (D) None of these

Last Answer : (A) Logarithmic mean area

Log mean temperature difference (LMTD) cannot be used, if (A) Heat transfer co-efficient over the entire heat exchanger is not constant (B) There exists an unsteady state (C) The heat capacity is not constant and there is a phase change (D) None of these

Description : Log mean temperature difference (LMTD) cannot be used, if (A) Heat transfer co-efficient over the entire heat exchanger is not constant (B) There exists an unsteady state (C) The heat capacity is not constant and there is a phase change (D) None of these

Last Answer : (D) None of these

For a heat exchanger, will the overall heat transfer coefficient increase along with an increase in LMTD (log mean temperature difference) around the unit?

Description : For a heat exchanger, will the overall heat transfer coefficient increase along with an increase in LMTD (log mean temperature difference) around the unit?

Last Answer : The overall heat transfer coefficient is generally weakly dependent on temperature. As the temperatures of the fluids change, the degree to which the overall heat transfer coefficient will be affected depends ... with temperature as I've noted and the U-value will decrease over time with fouling).

Pick out the wrong statement (A) Co-current absorbers are usually used, when the gas to be dissolved in the liquid is a pure substance (B) In case of gas absorption, HETP is equal to HTU, when both the operating line & the equilibrium lines are parallel (C) Hatta number is important in case of gas absorption with chemical reaction (D) In actual practice, absorption is an endothermic process, while stripping is an exothermic process

Description : Pick out the wrong statement (A) Co-current absorbers are usually used, when the gas to be dissolved in the liquid is a pure substance (B) In case of gas absorption, HETP is ... reaction (D) In actual practice, absorption is an endothermic process, while stripping is an exothermic process

Last Answer : (D) In actual practice, absorption is an endothermic process, while stripping is an exothermic process

The advantage of backward feed multiple effect evaporators over forward feed units is that (A) Heat sensitive material can be handled (B) There is no additional cost of pumping (C) Most concentrated liquid is at highest temperature (D) Equal heat transfer co-efficients exist in various effects

Description : The advantage of backward feed multiple effect evaporators over forward feed units is that (A) Heat sensitive material can be handled (B) There is no additional cost of pumping ... liquid is at highest temperature (D) Equal heat transfer co-efficients exist in various effects

Last Answer : (C) Most concentrated liquid is at highest temperature

Pick out the correct statement. (A) Higher is the temperature of the radiating body, higher is the wavelength of radiation (B) Logarithmic mean area is used for calculating the heat flow rate through a thick walled cylinder (C) The wavelength corresponding to maximum mono-chromatic emissive power increases with rise in temperature (D) Solid angle subtended by the finite surface at the radiating element is called the angle of incidence

Description : Pick out the correct statement. (A) Higher is the temperature of the radiating body, higher is the wavelength of radiation (B) Logarithmic mean area is used for calculating the heat flow rate ... ) Solid angle subtended by the finite surface at the radiating element is called the angle of incidence

Last Answer : (B) Logarithmic mean area is used for calculating the heat flow rate through a thick walled cylinder

LMTD correction factor which is to be applied for a cross-flow heat exchanger increases with increase in the number of shell passes. Its value for a single pass cross flow heat exchanger is (A) 0 (B) 1 (C) > 1 (D) < 1

Description : LMTD correction factor which is to be applied for a cross-flow heat exchanger increases with increase in the number of shell passes. Its value for a single pass cross flow heat exchanger is (A) 0 (B) 1 (C) > 1 (D) < 1

Last Answer : (D) < 1

Out of the following four assumptions used in the derivation of theequation for LMTD[LMTD = (∆t1- ∆t2)/ln(∆t1/∆t2)], which one is subject to the largest deviationin practice ?(A) Constant overall heat transfer co-efficient.(B) Constant rate of fluid flow(C) Constant specific heat(D) No partial phase change in the system

Description : Out of the following four assumptions used in the derivation of theequation for LMTD [LMTD = (∆t1 - ∆t2 )/ln(∆t1 /∆t2 )], which one is subject to the largest deviation in practice ? (A) Constant ... (B) Constant rate of fluid flow (C) Constant specific heat (D) No partial phase change in the system

Last Answer : (B) Constant rate of fluid flow

A two stage compressor is used to compress an ideal gas. The gas is cooled to the initial temperature after each stage. The intermediate pressure for the minimum total work requirement should be equal to the __________ mean of P1 and P2.(where, P1 and P2 are initial and final pressures respectively) (A) Logarithmic (B) Arithmetic (C) Geometric (D) Harmonic

Description : A two stage compressor is used to compress an ideal gas. The gas is cooled to the initial temperature after each stage. The intermediate pressure for the minimum total work requirement should be equal to ... final pressures respectively) (A) Logarithmic (B) Arithmetic (C) Geometric (D) Harmonic

Last Answer : (C) Geometric

It is an average power of a radio transmitter supplied to the antenna transmission line taken during a long sufficient interval of time and compared with the lowest frequency encountered in the modulation, taken under the normal operating conditions. A. Carrier power B. Rated power C. Mean power D. Peak envelop power

Description : It is an average power of a radio transmitter supplied to the antenna transmission line taken during a long sufficient interval of time and compared with the lowest frequency encountered in the modulation ... operating conditions. A. Carrier power B. Rated power C. Mean power D. Peak envelop power

Last Answer : C. Mean power

In case of evaporators, liquid entrainment results primarily due to (A) High vacuum in the evaporator (B) High evaporation rate (C) Foaming of the solution (D) High heat transfer rate

Description : In case of evaporators, liquid entrainment results primarily due to (A) High vacuum in the evaporator (B) High evaporation rate (C) Foaming of the solution (D) High heat transfer rate

Last Answer : (C) Foaming of the solution

For stripping of a gas in a counter current stripper, the operating line (A) Lies above the equilibrium curve (B) Lies below the equilibrium curve (C) Can lie above or below the equilibrium curve (D) Is always parallel to the equilibrium curve

Description : For stripping of a gas in a counter current stripper, the operating line (A) Lies above the equilibrium curve (B) Lies below the equilibrium curve (C) Can lie above or below the equilibrium curve (D) Is always parallel to the equilibrium curve

Last Answer : (C) Can lie above or below the equilibrium curve

Pick out the wrong statement (A) Low ozone layer thickness in polar regions is due to cold climatic conditions (B) Amount of unburnt hydrocarbons emitted by two stroke petrol engine is more as compared to that emitted by a four stroke engine (C) Carbon monoxide present in the two stroke petrol engine exhaust is much less as compared to that emitted from a four stroke engine (D) Mercury as a pollutant can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

Description : Pick out the wrong statement (A) Low ozone layer thickness in polar regions is due to cold climatic conditions (B) Amount of unburnt hydrocarbons emitted by two stroke petrol engine is more ... can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

Last Answer : (D) Mercury as a pollutant can enter the blood stream & the digestive system/ lungs and is responsible for causing Minamata disease

For a multipass shell and tube heat exchanger, the LMTD correction factor is always (A) 1 (B) > 1 (C) < 1 (D) Between 1 & 2

Description : For a multipass shell and tube heat exchanger, the LMTD correction factor is always (A) 1 (B) > 1 (C) < 1 (D) Between 1 & 2

Last Answer : (C) < 1

What kind of concerns is associated with temperature pinch points in condensers?

Description : What kind of concerns is associated with temperature pinch points in condensers?

Last Answer : Be extra careful when condensers are designed with a small pinch point. A pinch point is the smallest temperature difference on a temperature vs heat content plot that shows both streams. If the actual ... is 8 0F, there can be a 16% drop in heat transfer. Source: Gulley Computer Associates

In the equation Q = UAΔt; Δt is (A) Geometric mean temperature difference (B) Arithmetic mean temperature difference (C) Logarithmic mean temperature difference (D) The difference of average bulk temperatures of hot and cold fluids

Description : In the equation Q = UAΔt; Δt is (A) Geometric mean temperature difference (B) Arithmetic mean temperature difference (C) Logarithmic mean temperature difference (D) The difference of average bulk temperatures of hot and cold fluids

Last Answer : (C) Logarithmic mean temperature difference

The outlet temperature of cooling water in a heat exchanger is generally not allowed to exceed above 50°C in industrial practice mainly to avoid (A) Its evaporation loss (B) Excessive corrosion (C) Uneconomic LMTD (D) Decrease in heat exchanger efficiency

Description : The outlet temperature of cooling water in a heat exchanger is generally not allowed to exceed above 50°C in industrial practice mainly to avoid (A) Its evaporation loss (B) Excessive corrosion (C) Uneconomic LMTD (D) Decrease in heat exchanger efficiency

Last Answer : (B) Excessive corrosion

In under damped vibrating system, if x 1 and x 2 are the successive values of the amplitude on the same side of the mean position, then the logarithmic decrement is equal to A x 1 /x 2 B log (x 1 /x 2 ) C loge (x 1 /x 2 ) D log (x 1 .x 2 )

Description : In under damped vibrating system, if x 1 and x 2 are the successive values of the amplitude on the same side of the mean position, then the logarithmic decrement is equal to A x 1 /x 2 B log (x 1 /x 2 ) C loge (x 1 /x 2 ) D log (x 1 .x 2 )

Last Answer : C loge (x 1 /x 2 )

In under damped vibrating system, if x 1 and x 2 are the successive values of the C amplitude on the same side of the mean position, then the logarithmic decrement is equal to ( A ) x 1 /x 2 ( B ) log (x 1 /x 2 ) ( C ) loge (x 1 /x 2 ) ( D ) log (x 1 .x 2 )

Description : In under damped vibrating system, if x 1 and x 2 are the successive values of the C amplitude on the same side of the mean position, then the logarithmic decrement is equal to ( A ) x 1 /x 2 ( B ) log (x 1 /x 2 ) ( C ) loge (x 1 /x 2 ) ( D ) log (x 1 .x 2 )

Last Answer : ( C ) loge (x 1 /x 2 )

In under damped vibrating system, if x1 and x2 are the successive values of the amplitude on the same side of the mean position, then the logarithmic decrement is equal to a) x1/x2 b) log (x1/x2) c) ln (x1/x2) d) log (x1.x2)

Description : In under damped vibrating system, if x1 and x2 are the successive values of the amplitude on the same side of the mean position, then the logarithmic decrement is equal to a) x1/x2 b) log (x1/x2) c) ln (x1/x2) d) log (x1.x2)

Last Answer : c) ln (x1/x2)

In under damped vibrating system, if x 1 and x 2 are the successive values of the amplitude on the same side of the mean position, then the logarithmic decrement is equal to a) x 1 /x 2 b) log (x 1 /x 2 )c) loge (x 1 /x 2 ) d) log (x 1 .x 2 )

Description : In under damped vibrating system, if x 1 and x 2 are the successive values of the amplitude on the same side of the mean position, then the logarithmic decrement is equal to a) x 1 /x 2 b) log (x 1 /x 2 )c) loge (x 1 /x 2 ) d) log (x 1 .x 2 )

Last Answer : b) log (x 1 /x 2 )

In case of heat transfer by conduction in a hollow cylinder, __________ mean area is used to calculate the heat transfer rate. (A) Geometric (B) Arithmetic (C) Logarithmic (D) Either (A), (B) or (C)

Description : In case of heat transfer by conduction in a hollow cylinder, __________ mean area is used to calculate the heat transfer rate. (A) Geometric (B) Arithmetic (C) Logarithmic (D) Either (A), (B) or (C)

Last Answer : (C) Logarithmic

Terminal point temperature differences between fluids in case of a heat exchanger is termed as (A) Approach (B) Log mean temperature difference (C) Arithmetic mean temperature difference (D) Geometric mean temperature difference

Description : Terminal point temperature differences between fluids in case of a heat exchanger is termed as (A) Approach (B) Log mean temperature difference (C) Arithmetic mean temperature difference (D) Geometric mean temperature difference

Last Answer : (A) Approach

Capacity & power requirement for an air compressor working at high altitude compared to sea-level will be (A) More (B) Less (C) Same (D) Either more or less; depends on the climatic conditions

Description : Capacity & power requirement for an air compressor working at high altitude compared to sea-level will be (A) More (B) Less (C) Same (D) Either more or less; depends on the climatic conditions

Last Answer : (B) Less

Weight of 1 m3 of humid air as compared to 1 m3 of dry air, under the same conditions, is (A) Less (B) More (C) Same (D) Unpredictable

Description : Weight of 1 m3 of humid air as compared to 1 m3 of dry air, under the same conditions, is (A) Less (B) More (C) Same (D) Unpredictable

Last Answer : (A) Less

Viscous & heat sensitive liquids are concentrated in __________ evaporators. (A) Open pan (B) Long tube (C) Agitated film (D) None of these

Description : Viscous & heat sensitive liquids are concentrated in __________ evaporators. (A) Open pan (B) Long tube (C) Agitated film (D) None of these

Last Answer : (C) Agitated film

Multiple effect evaporators ar used to (A) Increase the steam economy & decrease the capacity (B) Increase the steam economy & the capacity (C) Decrease the steam economy & the capacity (D) Decrease the steam economy & increase the capacity

Description : Multiple effect evaporators ar used to (A) Increase the steam economy & decrease the capacity (B) Increase the steam economy & the capacity (C) Decrease the steam economy & the capacity (D) Decrease the steam economy & increase the capacity

Last Answer : (B) Increase the steam economy & the capacity

Forced circulation evaporators are normally used for concentrating liquids having (A) Scaling characteristics (B) High viscosity (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Forced circulation evaporators are normally used for concentrating liquids having (A) Scaling characteristics (B) High viscosity (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The optimum performance for reactors operating in parallel is obtained when the feed stream is distributed in such a way, that the (A) Space time for each parallel line is same (B) Space time for parallel lines is different (C) Larger reactors have more space time compared to smaller ones (D) None of these

Description : The optimum performance for reactors operating in parallel is obtained when the feed stream is distributed in such a way, that the (A) Space time for each parallel line is same (B) Space time for ... is different (C) Larger reactors have more space time compared to smaller ones (D) None of these

Last Answer : (A) Space time for each parallel line is same

Humid volume, at a given temperature is a/an __________ function of humidity. (A) Inverse (B) Exponential (C) Linear (D) Logarithmic

Description : Humid volume, at a given temperature is a/an __________ function of humidity. (A) Inverse (B) Exponential (C) Linear (D) Logarithmic

Last Answer : (C) Linear

A process stream of dilute aqueous solution flowing at the rate of10 Kg.s -1 is to be heated. Steam condensate at 95°C is available for heating purpose, also at a rate of 10 Kg.s -1 . A 1 - 1 shell and tube heat exchanger is available. The best arrangement is (A) Counter flow with process stream on shell side (B) Counter flow with process stream on tube side (C) Parallel flow with process stream on shell side (D) Parallel flow with process stream on tube side

Description : A process stream of dilute aqueous solution flowing at the rate of10 Kg.s -1 is to be heated. Steam condensate at 95°C is available for heating purpose, also at a rate of 10 Kg.s -1 . A 1 ... side (C) Parallel flow with process stream on shell side (D) Parallel flow with process stream on tube side

Last Answer : (A) Counter flow with process stream on shell side

. In evaporators, lowering the feed temperature (A) Increases the heating area required (B) Reduces the economy (C) Both (A) and (B) (D) Decreases the heating area required

Description : . In evaporators, lowering the feed temperature (A) Increases the heating area required (B) Reduces the economy (C) Both (A) and (B) (D) Decreases the heating area required

Last Answer : (C) Both (A) and (B)