When all the limiting reactant is consumed in the reaction, the operational yield __________ the relative yield. (A) Is greater than (B) Is smaller than (C) Equals (D) Can be either greater or smaller than (depends on the type of reaction)

When all the limiting reactant is consumed in the reaction, the
operational yield __________ the relative yield.
(A) Is greater than
(B) Is smaller than
(C) Equals
(D) Can be either greater or smaller than (depends on the type of reaction)
by

1 Answer

Answer :

(C) Equals
by

Related questions

The ratio of moles of a reactant converted into the desired product to that converted into unwanted product is called (A) Operational yield (B) Relative yield (C) Selectivity (D) None of these

Description : The ratio of moles of a reactant converted into the desired product to that converted into unwanted product is called (A) Operational yield (B) Relative yield (C) Selectivity (D) None of these

Last Answer : (C) Selectivity

In an absorption column, the flooding velocity for random packing is __________ that for stacked/regular packing. (A) Greater than (B) Smaller than (C) Equal to (D) Either (A), or (B); depends on the type of packing

Description : In an absorption column, the flooding velocity for random packing is __________ that for stacked/regular packing. (A) Greater than (B) Smaller than (C) Equal to (D) Either (A), or (B); depends on the type of packing

Last Answer : (B) Smaller than

Limiting reactant in a chemical reaction decides the (A) Rate constant (B) Conversion (C) Reaction speed (D) Equilibrium constant

Description : Limiting reactant in a chemical reaction decides the (A) Rate constant (B) Conversion (C) Reaction speed (D) Equilibrium constant

Last Answer : (B) Conversion

Concentration of the limiting reactant (with initial concentration of a moles/litre) after time t is (a-x). Then 't' for a first order reaction is given by (A) k. t = ln a/(a - x) (B) k. t = x/a (a - x) (C) k. t = ln (a - x)/a (D) k. t = ln a (a - x)/x

Description : Concentration of the limiting reactant (with initial concentration of a moles/litre) after time t is (a-x). Then 't' for a first order reaction is given by (A) k. t = ln a/(a - x) (B) k. t = x/a (a - x) (C) k. t = ln (a - x)/a (D) k. t = ln a (a - x)/x

Last Answer : (A) k. t = ln a/(a - x)

A first order reaction requires two unequal sized CSTR. Which of thefollowing gives higher yield?(A) Large reactor followed by smaller one(B) Smaller reactor followed by larger one(C) Either of the arrangement (A) or (B) will give the same yield(D) Data insufficient, can't be predicted

Description : A first order reaction requires two unequal sized CSTR. Which of thefollowing gives higher yield? (A) Large reactor followed by smaller one (B) Smaller reactor followed by larger one (C) Either of the arrangement (A) or (B) will give the same yield (D) Data insufficient, can't be predicted

Last Answer : (C) Either of the arrangement (A) or (B) will give the same yield

How do you convert recipes to yield smaller and larger quantities based on operational needs?

Description : How do you convert recipes to yield smaller and larger quantities based on operational needs?

Last Answer : Need answer

For series reaction, the relative yield (A) Is always greater for plug-flow reactor than for the single CSTR of the same volume (B) Statement in (A) is wrong (C) Decreases with increasing conversion (D) Both (A) and (C) hold good

Description : For series reaction, the relative yield (A) Is always greater for plug-flow reactor than for the single CSTR of the same volume (B) Statement in (A) is wrong (C) Decreases with increasing conversion (D) Both (A) and (C) hold good

Last Answer : (D) Both (A) and (C) hold good

6 gm of carbon is burnt with an amount of air containing 18 gm oxygen. The product contains 16.5 gms CO2 and 2.8 gms CO besides other constituents. What is the degree of conversion on the basis of disappearance of limiting reactant? (A) 100% (B) 95% (C) 75% (D) 20%

Description : 6 gm of carbon is burnt with an amount of air containing 18 gm oxygen. The product contains 16.5 gms CO2 and 2.8 gms CO besides other constituents. What is the degree of conversion on the basis of disappearance of limiting reactant? (A) 100% (B) 95% (C) 75% (D) 20%

Last Answer : (B) 95%

Percentage saturation is __________ the relative saturation. (A) Always smaller than (B) Always greater than (C) Not related to (D) None of these

Description : Percentage saturation is __________ the relative saturation. (A) Always smaller than (B) Always greater than (C) Not related to (D) None of these

Last Answer : (A) Always smaller than

In case of an unsaturated mixture of gas and vapor, the percentage saturation is __________ its relative saturation. (A) Lower than (B) Higher than (C) Equal to (D) Either (A) or (B), depends on the mixture composition

Description : In case of an unsaturated mixture of gas and vapor, the percentage saturation is __________ its relative saturation. (A) Lower than (B) Higher than (C) Equal to (D) Either (A) or (B), depends on the mixture composition

Last Answer : (A) Lower than

The rate constant of a first order reaction depends on the (A) Concentration of the reactant (B) Temperature (C) Concentration of the product (D) Time

Description : The rate constant of a first order reaction depends on the (A) Concentration of the reactant (B) Temperature (C) Concentration of the product (D) Time

Last Answer : (B) Temperature

Identify the INCORRECT statement below regarding chemical equilibrium. A All chemical reactions are, in principle, reversible. B Equilibrium is achieved when the forward reaction rate equals the reverse reaction rate. C Equilibrium is achieved when the concentrations of species become constant. D Equilibrium is achieved when the reaction quotient, Q, equals the equilibrium constant. E Equilibrium is achieved when reactant and product concentrations are equal.

Description : Identify the INCORRECT statement below regarding chemical equilibrium. A All chemical reactions are, in principle, reversible. B Equilibrium is achieved when the forward reaction rate equals the ... equilibrium constant. E Equilibrium is achieved when reactant and product concentrations are equal.

Last Answer : E Equilibrium is achieved when reactant and product concentrations are equal.

The exit cone angle in case of a standard Venturimeter is __________ the entrance cone angle. (A) Smaller than (B) Greater than (C) Equal to (D) Either (A) or (B)

Description : The exit cone angle in case of a standard Venturimeter is __________ the entrance cone angle. (A) Smaller than (B) Greater than (C) Equal to (D) Either (A) or (B)

Last Answer : (A) Smaller than

If 31.3 g of manganese(II) chloride 48.3 g of chlorine gas and 25.7 g of water react to produce manganese(IV) oxide and hydrochloric acid what is the limiting reactant and what mass of hydrochloric?

Description : If 31.3 g of manganese(II) chloride 48.3 g of chlorine gas and 25.7 g of water react to produce manganese(IV) oxide and hydrochloric acid what is the limiting reactant and what mass of hydrochloric?

Last Answer : Need answer

If 5.433 g of aluminum is burned with 8.834 g of oxygen gas what is the limiting reactant?

Description : If 5.433 g of aluminum is burned with 8.834 g of oxygen gas what is the limiting reactant?

Last Answer : Aluminium (Al) + Oxygen (O) = Aluminium Oxide (Al2O3)Aluminium Atomic weight = about 27Oxygen Atomic weight = about) 16Proportion in Al203 = Aluminium 54, Oxygen 48Thus the ratio of weight ... will run out before the Oxygen as the reaction proceeds, making the Aluminium the limiting reactant.

The size of the tetrahedral void in the closest packing of atoms is __________ that of the octahedral void. (A) Equal to (B) Greater than (C) Less than (D) Either (A), (B) or (C); depends on the size of atom

Description : The size of the tetrahedral void in the closest packing of atoms is __________ that of the octahedral void. (A) Equal to (B) Greater than (C) Less than (D) Either (A), (B) or (C); depends on the size of atom

Last Answer : (C) Less than

A catalyst in a chemical reaction __________ free energy change in the reaction. (A) Increases (B) Decreases (C) Either (A) or (B); depends on the type of catalyst (D) Neither (A) nor (B)

Description : A catalyst in a chemical reaction __________ free energy change in the reaction. (A) Increases (B) Decreases (C) Either (A) or (B); depends on the type of catalyst (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B); depends on the type of catalyst

Recycling back of outlet stream to the reactor from an ideal CSTR carrying out a first order liquid phase reaction will result in __________ in conversion. (A) Decrease (B) Increase (C) No change (D) Either (A) or (B), depends on the type of reaction

Description : Recycling back of outlet stream to the reactor from an ideal CSTR carrying out a first order liquid phase reaction will result in __________ in conversion. (A) Decrease (B) Increase (C) No change (D) Either (A) or (B), depends on the type of reaction

Last Answer : (C) No change

The equilibrium constant of chemical reaction __________ in the presence of catalyst. (A) Increases (B) Decreases (C) Remain unaffected (D) Can either increase or decrease (depends on the type of catalyst)

Description : The equilibrium constant of chemical reaction __________ in the presence of catalyst. (A) Increases (B) Decreases (C) Remain unaffected (D) Can either increase or decrease (depends on the type of catalyst)

Last Answer : (C) Remain unaffected

In a first order reaction, the time required to reduce the concentration of reactant from 1 mole/litre to 0.5 mole/litre will be __________ that requiredto reduce it from 10 moles/litre to 5 moles/litre in the same volume.(A) More than(B) Less than(C) Same as(D) Data insufficient; can't be predicted

Description : In a first order reaction, the time required to reduce the concentration of reactant from 1 mole/litre to 0.5 mole/litre will be __________ that requiredto reduce it from 10 moles/litre to 5 moles/litre in the ... (A) More than (B) Less than (C) Same as (D) Data insufficient; can't be predicted

Last Answer : (C) Same as

In a grinding operation, the limiting particle size is the size of the __________ particle in the sample. (A) Smallest (B) Largest (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : In a grinding operation, the limiting particle size is the size of the __________ particle in the sample. (A) Smallest (B) Largest (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

The size of plug flow reactor (PFR) for all positive reaction orders and for any given duty, is __________ that of mixed reactor. (A) Greater than (B) Equal to (C) Smaller than (D) Unpredictable from the data

Description : The size of plug flow reactor (PFR) for all positive reaction orders and for any given duty, is __________ that of mixed reactor. (A) Greater than (B) Equal to (C) Smaller than (D) Unpredictable from the data

Last Answer : (C) Smaller than

Half-life period for a first order reaction is __________ the initial concentration of the reactant. (A) Directly proportional to (B) Inversely proportional to (C) Independent of(D) None of these

Description : Half-life period for a first order reaction is __________ the initial concentration of the reactant. (A) Directly proportional to (B) Inversely proportional to (C) Independent of (D) None of these

Last Answer : (C) Independent of

The conversion in a mixed reactor/accomplishing a reaction A → 3R is 50% when gaseous reactant 'A' is introduced at the rate of 1 litre/second and the leaving flow rate is 2 litres/second. The holding time for this operation is __________ second. (A) 0.5 (B) 1 (C) 2(D) 3

Description : The conversion in a mixed reactor/accomplishing a reaction A → 3R is 50% when gaseous reactant 'A' is introduced at the rate of 1 litre/second and the leaving flow rate is 2 litres/second. The holding time for this operation is __________ second. (A) 0.5 (B) 1 (C) 2 (D) 3

Last Answer : (A) 0.5

For a __________ order chemical reaction as shown in the bellow figure, the fractional conversion of reactant 'A' is proportional to time. (A) Zero (B) First (C) Second (D) Third

Description : For a __________ order chemical reaction as shown in the bellow figure, the fractional conversion of reactant 'A' is proportional to time. (A) Zero (B) First (C) Second (D) Third

Last Answer : (A) Zero

For a __________ order chemical reaction as shown in the bellow figure, the half life period is independent of the initial concentration of the reactant A(A) Zero(B) First(C) Second(D) Third.

Description : For a __________ order chemical reaction as shown in the bellow figure, the half life period is independent of the initial concentration of the reactant A. (A) Zero (B) First (C) Second (D) Third

Last Answer : (B) First

first order chemical reaction, the concentration of the reactant decreases __________ with time. (A) Linearly (B) Exponentially (C) Logarithmically (D) Inversely

Description : first order chemical reaction, the concentration of the reactant decreases __________ with time. (A) Linearly (B) Exponentially (C) Logarithmically (D) Inversely

Last Answer : (A) Linearly

Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads (D) Fanning friction factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number

Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads

In an elastic collision, the RELATIVE velocities of separation of the two bodies after impact compared with the relative velocity of approach before impact is: w) always greater x) always smaller y) always the same z) first greater, then smaller

Description : In an elastic collision, the RELATIVE velocities of separation of the two bodies after impact compared with the relative velocity of approach before impact is: w) always greater x) always smaller y) always the same z) first greater, then smaller

Last Answer : ANSWER: Y -- ALWAYS THE SAME

During monsoon, the rice crop of eastern states of India shows lesser yield due to limiting factor of (a) CO2 (b) light (c) temperature (d) water.

Description : During monsoon, the rice crop of eastern states of India shows lesser yield due to limiting factor of (a) CO2 (b) light (c) temperature (d) water.

Last Answer : (b) light

According to IS:456-2000, Limiting value of yield strain for Fe250grade steel is [ A ] 0.031 [ B ] 0.0031 [ C ] 0.038 [ D ] 0.0038

Description : According to IS:456-2000, Limiting value of yield strain for Fe250grade steel is [ A ] 0.031 [ B ] 0.0031 [ C ] 0.038 [ D ] 0.0038

Last Answer : [ B ] 0.0031

According to IS: 456-2000, limiting value of yield strain for Fe415 grade steel is [ A ] 0.031 [ B ] 0.0031 [ C ] 0.038 [ D ] 0.0038

Description : According to IS: 456-2000, limiting value of yield strain for Fe415 grade steel is [ A ] 0.031 [ B ] 0.0031 [ C ] 0.038 [ D ] 0.0038

Last Answer : [ D ] 0.0038

According to IS:456-2000, Limiting value of yield strain for Fe250 grade steel is [ A ] 0.031 [ B ] 0.0031 [ C ] 0.038 [ D ] 0.0038

Description : According to IS:456-2000, Limiting value of yield strain for Fe250 grade steel is [ A ] 0.031 [ B ] 0.0031 [ C ] 0.038 [ D ] 0.0038

Last Answer : [ B ] 0.0031

According to IS: 456-2000, limiting value of yield strain for Fe415 grade steel is [ A ] 0.031 [ B ] 0.0031 [ C ] 0.038 [ D ] 0.0038

Description : According to IS: 456-2000, limiting value of yield strain for Fe415 grade steel is [ A ] 0.031 [ B ] 0.0031 [ C ] 0.038 [ D ] 0.0038

Last Answer : [ D ] 0.0038

In a consecutive reaction system of the given figure bellow, when E1 is much greater than E2 , the yield of B increases with the (A) Increase of temperature (B) Decrease of temperature (C) Increase in initial concentration of A (D) Decrease in initial concentration of A

Description : In a consecutive reaction system of the given figure bellow, when E1 is much greater than E2 , the yield of B increases with the (A) Increase of temperature (B) Decrease of temperature (C) Increase in initial concentration of A (D) Decrease in initial concentration of A

Last Answer : (A) Increase of temperature

Ignition temperature of a fuel in air is __________ that in pure oxygen. (A) More than(B) Less than(C) Equal to(D) Either more or less; depends on the type of fuel

Description : Ignition temperature of a fuel in air is __________ that in pure oxygen. (A) More than (B) Less than (C) Equal to (D) Either more or less; depends on the type of fuel

Last Answer : (A) More than

Gross heating value of coal is __________ the net heating value. (A) Higher than (B) Lower than (C) Same as (D) Either (A) or (B); depends on the type of coal

Description : Gross heating value of coal is __________ the net heating value. (A) Higher than (B) Lower than (C) Same as (D) Either (A) or (B); depends on the type of coal

Last Answer : (A) Higher than

The partial pressure of each constituent present in an alloy is __________ the total vapor pressure exerted by the alloy. (A) Less than (B) Equal to (C) More than (D) Either (B) or (C); depends on the type of alloy

Description : The partial pressure of each constituent present in an alloy is __________ the total vapor pressure exerted by the alloy. (A) Less than (B) Equal to (C) More than (D) Either (B) or (C); depends on the type of alloy

Last Answer : (A) Less than

In case of the irreversible unimolecular type, first order reaction, the fractional conversion at any time for constant volume system as compared to variable volume system is (A) More (B) Less (C) Same (D) Either (A) or (B), depends on other factors

Description : In case of the irreversible unimolecular type, first order reaction, the fractional conversion at any time for constant volume system as compared to variable volume system is (A) More (B) Less (C) Same (D) Either (A) or (B), depends on other factors

Last Answer : (C) Same

The energy consumed by a ball mill depends on (A) Its speed (B) Its ball load (C) The density of the material being ground (D) All (A), (B) and (C)

Description : The energy consumed by a ball mill depends on (A) Its speed (B) Its ball load (C) The density of the material being ground (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Gause’s principle of competitive exclusion states that (a) no two species can occupy the same niche indefinitely for the same limiting resources (b) larger organisms exclude smaller ones through competition (c) more abundant species will exclude the less abundant species through competition (d) competition for the same resources exclude species having different food preference

Description : Gause's principle of competitive exclusion states that (a) no two species can occupy the same niche indefinitely for the same limiting resources (b) larger organisms exclude smaller ... through competition (d) competition for the same resources exclude species having different food preference

Last Answer : (c) more abundant species will exclude the less abundant species through competition

The equivalent diameter for pressure drop is __________ that for heat transfer. (A) Smaller than (B) Greater than (C) Equal to (D) Not related with

Description : The equivalent diameter for pressure drop is __________ that for heat transfer. (A) Smaller than (B) Greater than (C) Equal to (D) Not related with

Last Answer : (A) Smaller than

Rate constant for a first order reaction does not depend upon reaction time, extent of reaction and the initial concentration of reactants; but it is afunction of reaction temperature. In a chemical reaction, the time requiredto reduce the concentration of reactant from 100 gm moles/litre to 50 gmmoles/litre is same as that required to reduce it from 2 gm moles/litre to 1gm mole/litre in the same volume. Then the order of this reaction is:(A) 0(B) 1(C) 2(D) 3

Description : Rate constant for a first order reaction does not depend upon reaction time, extent of reaction and the initial concentration of reactants; but it is afunction of reaction temperature. In a chemical reaction, the time required to ... Then the order of this reaction is: (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (B) 1

What is the unit of the rate constant in a chemical reaction in which 10% of the reactant decomposes in one hour, 20% in two hours, 30% in three hours and so on? (A) Litre/mole.second (B) Moles/litre.second (C) Litre/mole (D) Litre/second

Description : What is the unit of the rate constant in a chemical reaction in which 10% of the reactant decomposes in one hour, 20% in two hours, 30% in three hours and so on? (A) Litre/mole.second (B) Moles/litre.second (C) Litre/mole (D) Litre/second

Last Answer : (A) Litre/mole.second

Which of the following is a controlling factor in very fast heterogeneous reaction? (A) Heat and mass transfer effects (B) Pressure (C) Temperature (D) Composition of reactant

Description : Which of the following is a controlling factor in very fast heterogeneous reaction? (A) Heat and mass transfer effects (B) Pressure (C) Temperature (D) Composition of reactant

Last Answer : (A) Heat and mass transfer effects

For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst can cause the conversion of large amount of reactants which does not mean that catalyst concentration is important (C) The catalyst does not form an intermediate complex with the reactant (D) The surface of the catalyst does not play an important role during reaction

Description : For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst ... with the reactant (D) The surface of the catalyst does not play an important role during reaction

Last Answer : (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction

The irreversible reaction is a special case of reversible reaction, if the(A) Equilibrium constant is 1(B) Conversion of the reactant at equilibrium condition is zero(C) Reactant concentration at equilibrium condition is zero(D) All (A), (B) and (C)

Description : The irreversible reaction is a special case of reversible reaction, if the(A) Equilibrium constant is 1 (B) Conversion of the reactant at equilibrium condition is zero (C) Reactant concentration at equilibrium condition is zero (D) All (A), (B) and (C)

Last Answer : (C) Reactant concentration at equilibrium condition is zero

If the time required to change the concentration of reactant to half its original value is independent of the initial concentration, the order of reaction is: (A) Zero (B) One (C) Two (D) Three

Description : If the time required to change the concentration of reactant to half its original value is independent of the initial concentration, the order of reaction is: (A) Zero (B) One (C) Two (D) Three

Last Answer : (B) One

Velocity of a chemical reaction (A) Decreases with increase in temperature (B) Increases with increase of pressure of reactants for all reactions (C) Decreases with increase of reactant concentration (D) None of these

Description : Velocity of a chemical reaction (A) Decreases with increase in temperature (B) Increases with increase of pressure of reactants for all reactions (C) Decreases with increase of reactant concentration (D) None of these

Last Answer : (D) None of these