In a cup, tea cools from 90°C to 80°C in exactly one minute. It will cool from 70°C to 60°C in (a) less than one minute (b) exactly one minute (c) nearly one minute (d) more than one minute

In a cup, tea cools from 90°C to 80°C in exactly one minute. It will cool from 70°C to 60°C in (a) less than one minute (b) exactly one minute (c) nearly one minute (d) more than one minute
by

1 Answer

Answer :

Ans:(d)
by
selected

Related questions

or the selection of endospore-forming bacteria, a mixed culture can be heated at A- 80°C for 10 minutes B- 70°C for 10 minutes C- 60°C for 10 minutes D- 90°C for 10 minutes

Description : or the selection of endospore-forming bacteria, a mixed culture can be heated at A- 80°C for 10 minutes B- 70°C for 10 minutes C- 60°C for 10 minutes D- 90°C for 10 minutes

Last Answer : 80°C for 10 minutes

A body cools down from 75°C to 70°C in 10 minutes. It will cool down from 70° C to 65° C in __________ minutes. (A) 10 (B) > 10 (C) < 10 (D) Either (B) or (C), depends on the mass of the body

Description : A body cools down from 75°C to 70°C in 10 minutes. It will cool down from 70° C to 65° C in __________ minutes. (A) 10 (B) > 10 (C) < 10 (D) Either (B) or (C), depends on the mass of the body

Last Answer : (B) > 10

40 optimum working temperature for diesel engine is about ∙ 88-90°c ∙ 71-82°c ∙ 60-70°c ∙ 90-100°c

Description : 40 optimum working temperature for diesel engine is about ∙ 88-90°c ∙ 71-82°c ∙ 60-70°c ∙ 90-100°c

Last Answer : ∙ 88-90°c

ptimum working temperature for petrol engine is about ∙ 88-90°c ∙ 71-82°c ∙ 60-70°c ∙ 90-100°c

Description : ptimum working temperature for petrol engine is about ∙ 88-90°c ∙ 71-82°c ∙ 60-70°c ∙ 90-100°c

Last Answer : ∙ 71-82°c

For heavier fuels the cooling system of an internal combustion engine, the temperature is maintained at a) 78 to 80°C b) 80 to 84 °C c) 85 to 88°C d) 88 to 90°C

Description : For heavier fuels the cooling system of an internal combustion engine, the temperature is maintained at a) 78 to 80°C b) 80 to 84 °C c) 85 to 88°C d) 88 to 90°C

Last Answer : d) 88 to 90°C

Determination of water content of a soil sample suspected to contain gypsum is made by drying the sample for longer period at a temperature not more than (A) 60°C (B) 80°C (C) 100°C (D) 110°C

Description : Determination of water content of a soil sample suspected to contain gypsum is made by drying the sample for longer period at a temperature not more than (A) 60°C (B) 80°C (C) 100°C (D) 110°C

Last Answer : (B) 80°C

The flash point of transformer oil should be higher than (a) 40°C (b) 60°C (c) 80°C (d) 104°C

Description : The flash point of transformer oil should be higher than (a) 40°C (b) 60°C (c) 80°C (d) 104°C

Last Answer : (d) 104°C

Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure to the air with a wet bulb temperature of 60°C, then both the approach & the range would be 10°C (C) For unsaturated air-water vapor mixture at atmospheric conditions, the wet bulb temperature & adiabatic cooling lines are the same (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure

If a certain amount of dry ice is mixed with same amount of water at 80°C, the final temperature of mixture will be  (a) 80°C  (b) 0°C  (c) 40°C  (d) 20°C  (e) 60°C.

Description : If a certain amount of dry ice is mixed with same amount of water at 80°C, the final temperature of mixture will be  (a) 80°C  (b) 0°C  (c) 40°C  (d) 20°C  (e) 60°C.

Last Answer : Answer : b

A hot air balloon has a volume of 2800 m^3 at 99°C. What is the volume if the air cools to 80°C?

Description : A hot air balloon has a volume of 2800 m^3 at 99°C. What is the volume if the air cools to 80°C?

Last Answer : A hot air balloon has a volume of 2800 m3 at 99°C. What is the volume if the air cools to 80°C?

What color cup of tea cools down quickly ?

Description : What color cup of tea cools down quickly ?

Last Answer : Tea in a black cup cools quickly.

During hot weather, the fan produces a feeling of comfort. This is because – (1) fan supplies cool air (2) fan cools the air (3) our perspiration evaporates rapidly (4) conductivity of air increases

Description : During hot weather, the fan produces a feeling of comfort. This is because – (1) fan supplies cool air (2) fan cools the air (3) our perspiration evaporates rapidly (4) conductivity of air increases

Last Answer : (3) our perspiration evaporates rapidly Explanation: Fans make the air more comfortable for two reasons: (1) by moving the air, they blow away body heat and evaporate sweat, cooling the body, and (2) they also mix the cooler air near the floor with the warmer air by people's faces.

We feel cool when we sit near the fan, this is because – (1) fan gives cool air. (2) an cools surrounding air. (3) air vapourises the sweat on our body. (4) we feel cool when air touches the body.

Description : We feel cool when we sit near the fan, this is because – (1) fan gives cool air. (2) an cools surrounding air. (3) air vapourises the sweat on our body. (4) we feel cool when air touches the body.

Last Answer : (3) air vapourises the sweat on our body. Explanation: We feel comfortable sitting under a fan when we are perspiring because a fan increases the rate of evaporation of sweat (or moisture) from our body and makes us feel cool and comfortable.

The basic underlying principle of using a mist propagation system is that it: a. Keeps the propagation medium uniformly moist and supplies moisture to the base of the cuttings b. Keeps the plant material cool c. Cools the propagation medium to promote root formation and development d. Increases humidity around the cutting and reduces transpiration

Description : The basic underlying principle of using a mist propagation system is that it: a. Keeps the propagation medium uniformly moist and supplies moisture to the base of the cuttings b. ... medium to promote root formation and development d. Increases humidity around the cutting and reduces transpiration

Last Answer : Increases humidity around the cutting and reduces transpiration

We feel cool when we sit near the fan, this is because (1) fan gives cool air. (2) fan cools surrounding air. (3) air vapourises the sweat on our body. (4) we feel cool when air touches the body.

Description : We feel cool when we sit near the fan, this is because (1) fan gives cool air. (2) fan cools surrounding air. (3) air vapourises the sweat on our body. (4) we feel cool when air touches the body.

Last Answer : air vapourises the sweat on our body.

During hot weather, the fan produces a feeling of comfort. This is because (1) fan supplies cool air (2) fan cools the air (3) our perspiration eva-porates rapidly (4) conductivity of air increases

Description : During hot weather, the fan produces a feeling of comfort. This is because (1) fan supplies cool air (2) fan cools the air (3) our perspiration eva-porates rapidly (4) conductivity of air increases 

Last Answer : our perspiration eva-porates rapidly

The starting current of an electric motor is ________ the current flowing after the motor reaches its normal running speed. (a) nearly equal to (b) exactly equal to (c) less than (d) much greater than

Description : The starting current of an electric motor is ________ the current flowing after the motor reaches its normal running speed. (a) nearly equal to (b) exactly equal to (c) less than (d) much greater than

Last Answer : Ans:(d)

At what temperature is gypsum heated to form Plaster of Paris?a) 90°C b) 100°C c) 110°C d) 120°C

Description : At what temperature is gypsum heated to form Plaster of Paris?a) 90°C b) 100°C c) 110°C d) 120°C

Last Answer : b) 100°C

Thermal algae can live in: (a) Saline soil (b) Hot water streams of 70°C (C) Deserts (d) Snow balls

Description : Thermal algae can live in: (a) Saline soil (b) Hot water streams of 70°C (C) Deserts (d) Snow balls

Last Answer : Ans. ((b))

Typical solvent polymerisation reaction conditions for the production of high density polythene by Zeigler process is (A) 7 kgf/cm2 and 70 °C (B) 1000 kgf/cm2 and 100°C (C) 7 kgf/cm2 and 700°C (D) 1 kgf/cm2 (gage) and 70°C

Description : Typical solvent polymerisation reaction conditions for the production of high density polythene by Zeigler process is (A) 7 kgf/cm2 and 70 °C (B) 1000 kgf/cm2 and 100°C (C) 7 kgf/cm2 and 700°C (D) 1 kgf/cm2 (gage) and 70°C

Last Answer : (A) 7 kgf/cm2 and 70 °C

The insulation resistance of a DC motor is observed to be 15 MΩ at a temp. of 70°C. what is its value corrected to 40°C. the correction factor for 70°C is 8.0.

Description : The insulation resistance of a DC motor is observed to be 15 MΩ at a temp. of 70°C. what is its value corrected to 40°C. the correction factor for 70°C is 8.0. 

Last Answer : Observed resistance at 70°C – 15 MΩ. Temperature correction factor – 8. Rm = kt * Rt           kt – correction factor. Rm = 8 * 15          Rt – resistance measured at +°C. Rm = 120 MΩ.       Rm – corrected value to 40°C The IR of DC motor corrected to 40°C is 120 MΩ. 

Three of the following statements about enzymes are correct and one is wrong. Which one is wrong? (a) Enzymes require optimum pH for maximal activity. (b) Enzymes are denatured at high temperature but in certain exceptional organisms they are effective even at temperatures 80° - 90°C. (c) Enzymes are highly specific. (d) Most enzymes are proteins but some are lipids.

Description : Three of the following statements about enzymes are correct and one is wrong. Which one is wrong? (a) Enzymes require optimum pH for maximal activity. (b) Enzymes are denatured at high temperature but ... - 90°C. (c) Enzymes are highly specific. (d) Most enzymes are proteins but some are lipids.

Last Answer : (d) Most enzymes are proteins but some are lipids.

Maximum theoretical suction lift for water at 15°C by a centrifugal pump is 34 ft. The same for water at 90°C will be __________ ft. (A) 40 (B) 34 (C) 8 (D) 37

Description : Maximum theoretical suction lift for water at 15°C by a centrifugal pump is 34 ft. The same for water at 90°C will be __________ ft. (A) 40 (B) 34 (C) 8 (D) 37

Last Answer : (C) 8

For every 10°C rise in temperature, the rate of chemical reaction doubles. When the temperature is increased from 30 to 70°C, the rate of reaction increases __________ times. (A) 8 (B) 12 (C) 16 (D) 32

Description : For every 10°C rise in temperature, the rate of chemical reaction doubles. When the temperature is increased from 30 to 70°C, the rate of reaction increases __________ times. (A) 8 (B) 12 (C) 16 (D) 32

Last Answer : (C) 16

Process conditions in fermentator used for production of penicillin is (A) 25°C, 2 atm (B) 50°C, l0 atm (C) 30°C, 200 mm Hg (absolute) (D) 90°C, 45 atm

Description : Process conditions in fermentator used for production of penicillin is (A) 25°C, 2 atm (B) 50°C, l0 atm (C) 30°C, 200 mm Hg (absolute) (D) 90°C, 45 atm

Last Answer : (A) 25°C, 2 atm

Water content of a soil sample is the difference of the weight of the given sample at the given temperature and the weight determined after drying it for 24 hours at temperature ranging from (A) 80° to 90°C (B) 90° to 95°C (C) 103° to 105°C (D) 105° to 110°C

Description : Water content of a soil sample is the difference of the weight of the given sample at the given temperature and the weight determined after drying it for 24 hours at temperature ranging from (A) 80° to 90°C (B) 90° to 95°C (C) 103° to 105°C (D) 105° to 110°C

Last Answer : (D) 105° to 110°C

In a counter flow heat exchanger, hot fluid enters at 170°C & leaves at 150°C, while the cold fluid enters at 50°C & leaves at 70°C. The arithmetic mean temperature difference in this case is __________ °C. (A) 20 (B) 60 (C) 120 (D) ∞

Description : In a counter flow heat exchanger, hot fluid enters at 170°C & leaves at 150°C, while the cold fluid enters at 50°C & leaves at 70°C. The arithmetic mean temperature difference in this case is __________ °C. (A) 20 (B) 60 (C) 120 (D) ∞

Last Answer : (D) ∞

A rod 3 m long is heated from 10°C to 90°C. Find the expansion of rod. Take Young’s modulus = 1.0 x 10^5 MN/m2 and coefficient of thermal expansion = 0.000012 per degree centigrade. 1. 0.168 cm 2. 0.208 cm 3. 0.288 cm 4. 0.348 cm

Description : A rod 3 m long is heated from 10°C to 90°C. Find the expansion of rod. Take Young’s modulus = 1.0 x 10^5 MN/m2 and coefficient of thermal expansion = 0.000012 per degree centigrade. 1. 0.168 cm 2. 0.208 cm 3. 0.288 cm 4. 0.348 cm

Last Answer : 3. 0.288 cm

Hot water (0.01 m3 /min) enters the tube side of a counter current shell and tube heat exchanger at 80°C and leaves at 50°C. Cold oil (0.05 m3 /min) of density 800 kg/m3 and specific heat of 2 kJ/kg.K enters at 20°C. The log mean temperature difference in °C is approximately (A) 32 (B) 37 (C) 45 (D) 50

Description : Hot water (0.01 m3 /min) enters the tube side of a counter current shell and tube heat exchanger at 80°C and leaves at 50°C. Cold oil (0.05 m3 /min) of density 800 kg/m3 and specific heat of ... mean temperature difference in °C is approximately (A) 32 (B) 37 (C) 45 (D) 50

Last Answer : (A) 32

The left face of a one dimensional slab of thickness 0.2 m is maintained at 80°C and the right face is exposed to air at 30°C. The thermal conductivity of the slab is 1.2 W/m.K and the heat transfer co-efficient from the right face is 10 W/m2 .K. At steady state, the temperature of the right face in °C is (A) 77.2 (B) 71.2 (C) 63.8 (D) 48.7

Description : The left face of a one dimensional slab of thickness 0.2 m is maintained at 80°C and the right face is exposed to air at 30°C. The thermal conductivity of the slab is 1.2 W/m.K and the heat transfer co-efficient from the ... temperature of the right face in °C is (A) 77.2 (B) 71.2 (C) 63.8 (D) 48.7

Last Answer : (D) 48.7

Pollen grains can be stored for several years in liquid nitrogen having a temperature of (a) –120°C (b) –80°C (c) –196°C (d) –160°C

Description : Pollen grains can be stored for several years in liquid nitrogen having a temperature of (a) –120°C (b) –80°C (c) –196°C (d) –160°C

Last Answer : (c) –196°C

Centrifugal pump can't be used to pump (A) Molten sodium (used as a coolant in Fast Breeder Reactor) (B) Moderately viscous vegetable oil used in soap industry (C) Thick molten soap at 80°C (D) None of the above

Description : Centrifugal pump can't be used to pump (A) Molten sodium (used as a coolant in Fast Breeder Reactor) (B) Moderately viscous vegetable oil used in soap industry (C) Thick molten soap at 80°C (D) None of the above

Last Answer : (C) Thick molten soap at 80°C

Pollen grains can be stored for several years in liquid nitrogen having a temperature of (1) –120°C (2) –80°C (3) –196°C (4) –160°C

Description : Pollen grains can be stored for several years in liquid nitrogen having a temperature of (1) –120°C (2) –80°C (3) –196°C (4) –160°C

Last Answer : (3) –196°C

Pick up the correct statement from the following: A. Rate of digestion of sludge is more at higher temperature B. Thermophilic organisms digest the sludge if the temperature ranges from 40° to 60°C C. Mesophilic organisms digest the sludge if the temperature is between 25° and 40°C D. All the above

Description : Pick up the correct statement from the following: A. Rate of digestion of sludge is more at higher temperature B. Thermophilic organisms digest the sludge if the temperature ranges from 40° to 60°C C. Mesophilic organisms digest the sludge if the temperature is between 25° and 40°C D. All the above

Last Answer : ANS: D

Match the following : [IAS 1999] A. Cotton 1. Rainfall 1000-1500 mm; Temperature 40°-60°C B. Flax 2. Rainfall 1500-2000 mm; Temperature 25°-35°C C. Sugarbeet 3. Rainfall 600-S00 mm; Temperature 5°-18°C D. Jute 4. Rainfall 500-1000 mm; Temperature 18°-22°C 5. Rainfall 500-600 mm; Temperature 18°-22°C A B C D (a) 1 3 4 2 (b) 2 3 5 4 (c) 4 5 2 1 (d) 4 3 5 2 shop.ssbcrack.com

Description : Match the following : [IAS 1999] A. Cotton 1. Rainfall 1000-1500 mm; Temperature 40°-60°C B. Flax 2. Rainfall 1500-2000 mm; Temperature 25°-35°C C. Sugarbeet 3. Rainfall 600-S00 mm; Temperature 5°-18°C D. Jute 4. Rainfall 500-1000 mm; ... 1 3 4 2 (b) 2 3 5 4 (c) 4 5 2 1 (d) 4 3 5 2 shop.ssbcrack.com

Last Answer : Ans: (d)

Bence jones proteinurial characterized by (A) Non-heat coagulability (B) Heat coagulability at 100°C (C) Heat coagulability at 45 to 60°C (D) Precipitation at 25°C

Description : Bence jones proteinurial characterized by (A) Non-heat coagulability (B) Heat coagulability at 100°C (C) Heat coagulability at 45 to 60°C (D) Precipitation at 25°C

Last Answer : Answer : C

Pasteurisation is the process in which milk is heated to – (1) 60°C for 10 minutes (2) 63° C for 20 minutes (3) 63°C for 30 minutes (4) 72°C for 10 minutes

Description : Pasteurisation is the process in which milk is heated to – (1) 60°C for 10 minutes (2) 63° C for 20 minutes (3) 63°C for 30 minutes (4) 72°C for 10 minutes

Last Answer : (3) 63°C for 30 minutes Explanation: Pasteurization for pasteurisation) is a process of heating a food, which is usually a liquid, to a specific temperature for a predefined length of time ... (assuming the pasteurized product is stored as indicated and is consumed before its expiration date).

Unless it can be shown that a 45°C ambient temperature will not be exceeded, motors within a machinery space must be designed for an ambient temperature of _____________. A. 45°C B. 50°C C. 55°C D. 60°C

Description : Unless it can be shown that a 45°C ambient temperature will not be exceeded, motors within a machinery space must be designed for an ambient temperature of _____________. A. 45°C B. 50°C C. 55°C D. 60°C

Last Answer : Answer: B

Polythene (low or high density) containers are not corroded by (A) Sulphuric acid (10%) at room temperature (B) Nitric acid (95%) at room temperature (C) Sulphur trioxide at 60°C (D) Any of these

Description : Polythene (low or high density) containers are not corroded by (A) Sulphuric acid (10%) at room temperature (B) Nitric acid (95%) at room temperature (C) Sulphur trioxide at 60°C (D) Any of these

Last Answer : (A) Sulphuric acid (10%) at room temperature

Lead lined equipments & vessels are suitable for handling (A) Hydrochloric acid (10%) (B) Nitric acid (C) Sulphuric acid upto 60°C (D) All (A), (B) and (C)

Description : Lead lined equipments & vessels are suitable for handling (A) Hydrochloric acid (10%) (B) Nitric acid (C) Sulphuric acid upto 60°C (D) All (A), (B) and (C)

Last Answer : (C) Sulphuric acid upto 60°C

1 kg of a saturated aqueous solution of a highly soluble component A at 60°C is cooled to 25°C. The solubility limits of A are (0.6 kgA/kg water) at 60°C and (0.2 kgA/kg water) at 25°C. The amount in kg of the crystals formed is: (A) 0.4 (B) 0.25 (C) 0.2 (D) 0.175

Description : 1 kg of a saturated aqueous solution of a highly soluble component A at 60°C is cooled to 25°C. The solubility limits of A are (0.6 kgA/kg water) at 60°C and (0.2 kgA/kg water) at 25°C. The amount in kg of the crystals formed is: (A) 0.4 (B) 0.25 (C) 0.2 (D) 0.175

Last Answer : (C) 0.2

An air-water vapour mixture has a dry bulb temperature of 60°C and a dew point temperature of 40°C. The total pressure is 101.3 kPa and the vapour pressure of water at 40°C and 60°C are 7.30 kPa and 19.91 kPa respectively. The humidity of air sample expressed as kg of water vapour/kg of dry air is: (A) 0.048 (B) 0.079 (C) 0.122 (D) 0.152

Description : An air-water vapour mixture has a dry bulb temperature of 60°C and a dew point temperature of 40°C. The total pressure is 101.3 kPa and the vapour pressure of water at 40°C and 60°C are 7.30 kPa and 19.91 kPa respectively ... air is: (A) 0.048 (B) 0.079 (C) 0.122 (D) 0.152

Last Answer : (D) 0.152

Thermophilic micro-organism grow well at temperature– 1) 10°C – 20°C 2) 20°C – 40°C 3) 50°C – 60°C 4) 5°C – 7°C

Description : Thermophilic micro-organism grow well at temperature– 1) 10°C – 20°C 2) 20°C – 40°C 3) 50°C – 60°C 4) 5°C – 7°C

Last Answer : 3) 50°C – 60°C

Naphthalene undergoes nitration with HNO3/H2SO4 at 60°C to give mainly (a) 1-Nitronaphthalene (b) 1,2-Dinitronaphthalene (c) 2-Nitronaphthalene (d) 1,5-Dinitronaphthalene

Description : Naphthalene undergoes nitration with HNO3/H2SO4 at 60°C to give mainly (a) 1-Nitronaphthalene (b) 1,2-Dinitronaphthalene (c) 2-Nitronaphthalene (d) 1,5-Dinitronaphthalene

Last Answer : 1-Nitronaphthalene

Which of the following statements is False/Incorrect about nitrobenzene? (a) is formed by nitration of benzene at temperatures below 60°C. (b) can be further nitrated to give m-dinitrobenzene. (c) can be oxidized with KMnO4 to give benzoic acid. (d) can be reduced with Sn/HCl to give aniline.

Description : Which of the following statements is False/Incorrect about nitrobenzene? (a) is formed by nitration of benzene at temperatures below 60°C. (b) can be further nitrated to give m-dinitrobenzene. (c) can be oxidized with KMnO4 to give benzoic acid. (d) can be reduced with Sn/HCl to give aniline.

Last Answer : can be oxidized with KMnO4 to give benzoic acid

There are 1.36 kg of gas, for which R = 377 J/kg.k and k = 1.25, that undergo a nonflow constant volume process from p1 = 551.6 kPa and t1 = 60°C to p2 = 1655 kPa. During the process the gas is internally stirred and there are also added 105.5 kJ of heat. Determine t2. (Formula: T2= T1p2/ p1)  a. 999 K  b. 888 K  c. 456 K  d. One of the above

Description : There are 1.36 kg of gas, for which R = 377 J/kg.k and k = 1.25, that undergo a nonflow constant volume process from p1 = 551.6 kPa and t1 = 60°C to p2 = 1655 kPa. During the process the gas is internally stirred and ... (Formula: T2= T1p2/ p1)  a. 999 K  b. 888 K  c. 456 K  d. One of the above

Last Answer : 999 K

Pasteurisation is the process in which milk is heated to (1) 60°C for 10 minutes (2) 63° C for 20 minutes (3) 63°C for 30 minutes (4) 72°C for 10 minutes

Description : Pasteurisation is the process in which milk is heated to (1) 60°C for 10 minutes (2) 63° C for 20 minutes (3) 63°C for 30 minutes (4) 72°C for 10 minutes

Last Answer : 63°C for 30 minutes

Match the following: List-I List-II (Crops) (Geographical conditions) A. Barley 1. Hot and dry climate with poor soil B. Rice 2. Cool climate with poorer soil C. Millets 3. Warm and moist climate with high altitude D. Tea 4. Hot and moist climate with rich soil Codes: A B C D (a) 2 4 1 3 (b) 3 4 1 2 (c) 2 1 4 3 (d) 3 2 4 1

Description : Match the following: List-I List-II (Crops) (Geographical conditions) A. Barley 1. Hot and dry climate with poor soil B. Rice 2. Cool climate with poorer soil C. Millets 3. Warm and moist climate with high altitude D. Tea 4. Hot and moist ... C D (a) 2 4 1 3 (b) 3 4 1 2 (c) 2 1 4 3 (d) 3 2 4 1

Last Answer : Ans: (a)

Match the following [IAS 1997] Crops Geographical conditions A. Barley 1. Hot and dry climate with poor soil B. Rice 2. Cool climate with poorer soil C. Millets 3. Warm and Moist climate with high altitude D. Tea 4. Hot and Moist climate with rich soil A B C D (a) 2 4 1 3 (b) 3 4 1 2 (c) 2 1 4 3 (d) 3 2 4 1

Description : Match the following [IAS 1997] Crops Geographical conditions A. Barley 1. Hot and dry climate with poor soil B. Rice 2. Cool climate with poorer soil C. Millets 3. Warm and Moist climate with high altitude D. Tea 4. Hot and Moist climate with ... D (a) 2 4 1 3 (b) 3 4 1 2 (c) 2 1 4 3 (d) 3 2 4 1

Last Answer : Ans: (a)

When air is warm, it rises and leaves an area of low pressure which becomes filled with sinking cold air. After a hot, sunny day, the land cools faster than the sea. What is likely to happen after a hot, sunny day on the sea shore?

Description : When air is warm, it rises and leaves an area of low pressure which becomes filled with sinking cold air. After a hot, sunny day, the land cools faster than the sea. What is likely to happen after a hot, sunny day on the sea shore?

Last Answer : When air is warm, it rises and leaves an area of low pressure which becomes filled with sinking cold air. After a hot, sunny day, the land cools faster than the sea. What is likely to happen after a hot, sunny day on the sea shore?