Programming a robot by physically moving it through the trajectory you want it to follow is called _____________ a) contact sensing control b) continuous-path control c) robot vision control d) pick-and-place control

Programming a robot by physically moving it through the trajectory you want it to follow is called
_____________
a) contact sensing control
b) continuous-path control
c) robot vision control
d) pick-and-place control
by

1 Answer

Answer :

b) continuous-path control
by

Related questions

Programming a robot by physically moving it through the trajectory you want it to follow be called __________ a) contact sensing control b) continuous-path control c) robot vision control d) pick-and-place control

Description : Programming a robot by physically moving it through the trajectory you want it to follow be called __________ a) contact sensing control b) continuous-path control c) robot vision control d) pick-and-place control

Last Answer : b) continuous-path control

If a robot can alter its own trajectory in response to external conditions, it is considered to be ____________ a) intelligent b) mobile c) open loop d) non-servo

Description : If a robot can alter its own trajectory in response to external conditions, it is considered to be ____________ a) intelligent b) mobile c) open loop d) non-servo

Last Answer : a) intelligent

If a robot can alter its own trajectory in response to external conditions, it is considered to be __________ a) intelligent b) mobile c) open loop d) non-servo

Description : If a robot can alter its own trajectory in response to external conditions, it is considered to be __________ a) intelligent b) mobile c) open loop d) non-servo

Last Answer : a) intelligent

A computer vision technique that relies on image templates is __________ a) edge detection b) binocular vision c) model-based vision d) robot vision

Description : A computer vision technique that relies on image templates is __________ a) edge detection b) binocular vision c) model-based vision d) robot vision

Last Answer : c) model-based vision

A problem solving approach works well for ______________ a) 8-Puzzle problem b) 8-queen problem c) Finding a optimal path from a given source to a destination d) Mars Hover (Robot Navigation)

Description : A problem solving approach works well for ______________ a) 8-Puzzle problem b) 8-queen problem c) Finding a optimal path from a given source to a destination d) Mars Hover (Robot Navigation)

Last Answer : d) Mars Hover (Robot Navigation)

Which of the following “laws” is Asimov’s first and most important law of robotics? a) robot actions must never result in damage to the robot b) robots must never take actions harmful to humans c) robots must follow the directions given by humans d) robots must make business a greater profit

Description : Which of the following “laws” is Asimov’s first and most important law of robotics? a) robot actions must never result in damage to the robot b) robots must never take actions harmful to humans c) robots must follow the directions given by humans d) robots must make business a greater profit

Last Answer : b) robots must never take actions harmful to humans

Nils Nilsson headed a team at SRI that created a mobile robot named _____________ a) Robotics b) Dedalus c) Shakey d) Vax

Description : Nils Nilsson headed a team at SRI that created a mobile robot named _____________ a) Robotics b) Dedalus c) Shakey d) Vax

Last Answer : c) Shakey

Sensing organs as input, mechanical movement organs as output and central nervous system (CNS) in brain as control and computing devices is known as _____ of human being A. Information Control Paradigm B. Information Processing Paradigm C. Information Processing Control D. None of above

Description : Sensing organs as input, mechanical movement organs as output and central nervous system (CNS) in brain as control and computing devices is known as _____ of human being A. Information Control Paradigm B. Information Processing Paradigm C. Information Processing Control D. None of above

Last Answer : B. Information Processing Paradigm 

If a robot can alter its own trajectory in response to external conditions it is considered to be A : Intelligent B : Mobile C : Open loop D : Non-servo

Description : If a robot can alter its own trajectory in response to external conditions it is considered to be A : Intelligent B : Mobile C : Open loop D : Non-servo

Last Answer : A : Intelligent

If a robot can alter its own trajectory in response to external conditions it is considered to be A : Intelligent B : Mobile C : Open loop D : Non-servo

Description : If a robot can alter its own trajectory in response to external conditions it is considered to be A : Intelligent B : Mobile C : Open loop D : Non-servo

Last Answer : A : Intelligent

If a robot can alter its own trajectory in response to external conditions, it is considered to be: ⮚ mobile ⮚ open loop ⮚ intelligent ⮚ non-servo

Description : If a robot can alter its own trajectory in response to external conditions, it is considered to be: ⮚ mobile ⮚ open loop ⮚ intelligent ⮚ non-servo

Last Answer : ⮚ intelligent

In part programming, interpolation is used for obtaining trajectory. a.helicoidal b.pentagonal c.triangular d.zig-zag

Description : In part programming, interpolation is used for obtaining trajectory. a.helicoidal b.pentagonal c.triangular d.zig-zag

Last Answer : a.helicoidal

In which of the following operations Continuous Path System is used (A) Pick and Place (B) Loading and Unloading (C) Continuous welding

Description : In which of the following operations Continuous Path System is used (A) Pick and Place (B) Loading and Unloading (C) Continuous welding

Last Answer : C

The action ‘STACK(A, B)’ of a robot arm specify to _______________ a) Place block B on Block A b) Place blocks A, B on the table in that order c) Place blocks B, A on the table in that order d) Place block A on block B

Description : The action ‘STACK(A, B)’ of a robot arm specify to _______________ a) Place block B on Block A b) Place blocks A, B on the table in that order c) Place blocks B, A on the table in that order d) Place block A on block B

Last Answer : d) Place block A on block B

If the velocity of charged particle has both perpendicular and parallel components while moving through a magnetic field ,then what is the path follow

Description : If the velocity of charged particle has both perpendicular and parallel components while moving through a magnetic field ,then what is the path follow

Last Answer : If the velocity of charged particle has both perpendicular and parallel components while moving through a ... B. Ellipatical C. Linear D. Helical

The technique of collecting information about an object from a distance without making physical contact with it is (1) Remote sensing (2) Remote control (3) Remote accessing (4) Space shuttle

Description : The technique of collecting information about an object from a distance without making physical contact with it is (1) Remote sensing (2) Remote control (3) Remote accessing (4) Space shuttle

Last Answer : Remote sensing

SONAR is example of A : Video sensing B : GPS C : Robot D : Machine

Description : SONAR is example of A : Video sensing B : GPS C : Robot D : Machine

Last Answer : B : GPS

SONAR is example of A : Video sensing B : GPS C : Robot D : Machine

Description : SONAR is example of A : Video sensing B : GPS C : Robot D : Machine

Last Answer : B : GPS

SONAR is example of A : Video sensing B : GPS C : Robot D : Machine

Description : SONAR is example of A : Video sensing B : GPS C : Robot D : Machine

Last Answer : B : GPS

The law of conservation of mechanical energy is valid a.Irrespective of the nature of force field b.Only in gravitational field c.Only if the total work done by the particle in moving around in a closed trajectory is zero d.Only if the force is tangential to the trajectory e.None of the above

Description : The law of conservation of mechanical energy is valid a.Irrespective of the nature of force field b.Only in gravitational field c.Only if the total work done by the particle in moving around in a closed trajectory is zero d.Only if the force is tangential to the trajectory e.None of the above

Last Answer : c. Only if the total work done by the particle in moving around in a closed trajectory is zero

A boy sitting in a train moving with a uniform velocity drops a coin outside. A man standing outside the train will find the trajectory of the coin to be - (1) a parabola (2) a horizontal straight line (3) a vertical straight line (4) a circle

Description : A boy sitting in a train moving with a uniform velocity drops a coin outside. A man standing outside the train will find the trajectory of the coin to be - (1) a parabola (2) a horizontal straight line (3) a vertical straight line (4) a circle

Last Answer : (1) a parabola Explanation: Parabola, because when the coin is dropped at a particular point, it has the same velocity as the running train. So, by Newton's first law, it continues its motion horizontally with that velocity.

In which phase of the trajectory model of chronic illness are the symptoms under control and managed? a) Stable The stable phase indicates that the symptoms and disability are under control or managed. b) Acute The acute phase is characterized by sudden onset of severe or unrelieved symptoms or complications that may necessitate hospitalization for their management. c) Comeback The comeback phase is the period in the trajectory marked by recovery after an acute period. d) Downward The downward phase occurs when symptoms worsen or the disability progresses despite attempts to control the course through proper management.

Description : In which phase of the trajectory model of chronic illness are the symptoms under control and managed? a) Stable The stable phase indicates that the symptoms and disability are under ... symptoms worsen or the disability progresses despite attempts to control the course through proper management.

Last Answer : a) Stable The stable phase indicates that the symptoms and disability are under control or managed.

The pitting of controller contacts can be caused by _____________. A. excessive spring pressure B. insufficient contact pressure C. continuous motor overload D. all of the above

Description : The pitting of controller contacts can be caused by _____________. A. excessive spring pressure B. insufficient contact pressure C. continuous motor overload D. all of the above

Last Answer : Answer: B

Pick up the correct statement from the following: (A) In remote sensing technique, the observation place, is called a platform (B) Platforms may be either stationary or mobile (C) Spatial resolution of the imaging system becomes poorer with increase of platform height (D) All of these

Description : Pick up the correct statement from the following: (A) In remote sensing technique, the observation place, is called a platform (B) Platforms may be either stationary or mobile (C) Spatial resolution of the imaging system becomes poorer with increase of platform height (D) All of these

Last Answer : Answer: Option D

Which of the following terms refers to the use of compressed gasses to drive (power) the robot device? a) pneumatic b) hydraulic c) piezoelectric d) photosensitive

Description : Which of the following terms refers to the use of compressed gasses to drive (power) the robot device? a) pneumatic b) hydraulic c) piezoelectric d) photosensitive

Last Answer : a) pneumatic

Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? a) sensor b) controller c) arm d) end effector

Description : Which of the basic parts of a robot unit would include the computer circuitry that could be programmed to determine what the robot would do? a) sensor b) controller c) arm d) end effector

Last Answer : b) controller

For a robot unit to be considered a functional industrial robot, typically, how many degrees of freedom would the robot have? a) three b) four c) six d) eight

Description : For a robot unit to be considered a functional industrial robot, typically, how many degrees of freedom would the robot have? a) three b) four c) six d) eight

Last Answer : c) six

The number of moveable joints in the base, the arm, and the end effectors of the robot determines_________ a) degrees of freedom b) payload capacity c) operational limits d) flexibility

Description : The number of moveable joints in the base, the arm, and the end effectors of the robot determines_________ a) degrees of freedom b) payload capacity c) operational limits d) flexibility

Last Answer : a) degrees of freedom

Which of the following terms IS NOT one of the five basic parts of a robot? a) peripheral tools b) end effectors c) controller d) drive

Description : Which of the following terms IS NOT one of the five basic parts of a robot? a) peripheral tools b) end effectors c) controller d) drive

Last Answer : a) peripheral tools

What is the name for space inside which a robot unit operates? a) environment b) spatial base c) work envelope d) exclusion zone

Description : What is the name for space inside which a robot unit operates? a) environment b) spatial base c) work envelope d) exclusion zone

Last Answer : c) work envelope

Which of the following terms refers to the rotational motion of a robot arm? a) swivel b) axle c) retrograde d) roll

Description : Which of the following terms refers to the rotational motion of a robot arm? a) swivel b) axle c) retrograde d) roll

Last Answer : d) roll

What is the name for information sent from robot sensors to robot controllers? a) temperature b) pressure c) feedback d) signal

Description : What is the name for information sent from robot sensors to robot controllers? a) temperature b) pressure c) feedback d) signal

Last Answer : c) feedback

What among the following is/are the example of the intelligent agent/agents? a) Human b) Robot c) Autonomous Spacecraft d) All of the mentioned

Description : What among the following is/are the example of the intelligent agent/agents? a) Human b) Robot c) Autonomous Spacecraft d) All of the mentioned

Last Answer : d) All of the mentioned

A basic line following robot is based on __________ a) Strong Artificial Intelligence approach b) Weak Artificial Intelligence approach c) Cognitive Artificial Intelligence approach d) Applied Artificial Intelligence approach

Description : A basic line following robot is based on __________ a) Strong Artificial Intelligence approach b) Weak Artificial Intelligence approach c) Cognitive Artificial Intelligence approach d) Applied Artificial Intelligence approach

Last Answer : b) Weak Artificial Intelligence approach

Visual clues that are helpful in computer vision include __________ a) color and motion b) depth and texture c) height and weight d) color and motion, depth and texture

Description : Visual clues that are helpful in computer vision include __________ a) color and motion b) depth and texture c) height and weight d) color and motion, depth and texture

Last Answer : d) color and motion, depth and texture

Which are recognized by vision? a) Objects b) Activities c) Motion d) Both Objects & Activities

Description : Which are recognized by vision? a) Objects b) Activities c) Motion d) Both Objects & Activities

Last Answer : d) Both Objects & Activities

What enables people to recognize people, animals and inanimate objects reliably? a) Speech b) Vision c) Hear d) Perception

Description : What enables people to recognize people, animals and inanimate objects reliably? a) Speech b) Vision c) Hear d) Perception

Last Answer : b) Vision

Visual clues that are helpful in computer vision include __________ a) color and motion b) depth and texture c) height and weight d) color and motion, depth and texture

Description : Visual clues that are helpful in computer vision include __________ a) color and motion b) depth and texture c) height and weight d) color and motion, depth and texture

Last Answer : d) color and motion, depth and texture

Which approach to speech recognition avoids the problem caused by the differences in the way words are pronounced according to context? a) continuous speech recognition b) connected word recognition c) isolated word recognition d) speaker-dependent recognition

Description : Which approach to speech recognition avoids the problem caused by the differences in the way words are pronounced according to context? a) continuous speech recognition b) connected word recognition c) isolated word recognition d) speaker-dependent recognition

Last Answer : c) isolated word recognition

What is meant by probability density function? a) Probability distributions b) Continuous variable c) Discrete variable d) Probability distributions for Continuous variables

Description : What is meant by probability density function? a) Probability distributions b) Continuous variable c) Discrete variable d) Probability distributions for Continuous variables

Last Answer : d) Probability distributions for Continuous variables

Which variable cannot be written in entire distribution as a table? a) Discrete b) Continuous c) Both Discrete & Continuous d) None of the mentioned

Description : Which variable cannot be written in entire distribution as a table? a) Discrete b) Continuous c) Both Discrete & Continuous d) None of the mentioned

Last Answer : b) Continuous

A Hybrid Bayesian network contains ___________ a) Both discrete and continuous variables b) Only Discrete variables c) Only Discontinuous variable

Description : A Hybrid Bayesian network contains ___________ a) Both discrete and continuous variables b) Only Discrete variables c) Only Discontinuous variable

Last Answer : a) Both discrete and continuous variables

Membership function defines the fuzziness in a fuzzy set irrespective of the elements in the set, which are discrete or continuous. A. True B. False

Description : Membership function defines the fuzziness in a fuzzy set irrespective of the elements in the set, which are discrete or continuous. A. True B. False

Last Answer : B. False

What is meant by probability density function? a) Probability distributions b) Continuous variable c) Discrete variable d) Probability distributions for Continuous variables

Description : What is meant by probability density function? a) Probability distributions b) Continuous variable c) Discrete variable d) Probability distributions for Continuous variables

Last Answer : d) Probability distributions for Continuous variables

Special programs that assist programmers are called ____________ a) heuristic processors b) symbolic programmers c) intelligent programming tools d) program recognizers

Description : Special programs that assist programmers are called ____________ a) heuristic processors b) symbolic programmers c) intelligent programming tools d) program recognizers

Last Answer : c) intelligent programming tools

Seymour Papert of the MIT AI lab created a programming environment for children called ___________ a) BASIC b) LOGO c) MYCIN d) FORTRAN

Description : Seymour Papert of the MIT AI lab created a programming environment for children called ___________ a) BASIC b) LOGO c) MYCIN d) FORTRAN

Last Answer : b) LOGO

One method of programming a computer to exhibit human intelligence is called modeling or __________ a) simulation b) cognitization c) duplication d) psychic amelioration

Description : One method of programming a computer to exhibit human intelligence is called modeling or __________ a) simulation b) cognitization c) duplication d) psychic amelioration

Last Answer : a) simulation

The first AI programming language was called: a. BASIC b. FORTRAN c. IPL d. LISP

Description : The first AI programming language was called: a. BASIC b. FORTRAN c. IPL d. LISP

Last Answer : c. IPL