What are the benefits of feed water heating?

What are the benefits of feed water heating? 
by

1 Answer

Answer :

a. It improves the plant efficiency. 

b. Feed water is heated nearer to saturation point thus thermal shock to boiler is avoided. 
by

Related questions

Name different methods used to extract steam for heating the feed water?

Description : Name different methods used to extract steam for heating the feed water?

Last Answer : • Direct contact heater • Drain pump method • All drains to hot well • Cascade system

Name Different Methods Used To Extract Steam For Heating The Feed Water?

Description : Name Different Methods Used To Extract Steam For Heating The Feed Water?

Last Answer :  Direct contact heater  Drain pump method  All drains to hot well  Cascade system

The actual temperature drop across the heating surface in an evaporator depends on the (A) Feed (B) Depth of liquid over heating surface (C) Pressure difference between steam chest and vapour space (D) All (A), (B) and (C)

Description : The actual temperature drop across the heating surface in an evaporator depends on the (A) Feed (B) Depth of liquid over heating surface (C) Pressure difference between steam chest and vapour space (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

. In evaporators, lowering the feed temperature (A) Increases the heating area required (B) Reduces the economy (C) Both (A) and (B) (D) Decreases the heating area required

Description : . In evaporators, lowering the feed temperature (A) Increases the heating area required (B) Reduces the economy (C) Both (A) and (B) (D) Decreases the heating area required

Last Answer : (C) Both (A) and (B)

Apart from feed heating, what should a plant have to obtain a gain in thermal efficiency? a) Lubrication b) Differential heating c) Reheating cycles d) Regenerative cycles

Description : Apart from feed heating, what should a plant have to obtain a gain in thermal efficiency? a) Lubrication b) Differential heating c) Reheating cycles d) Regenerative cycles

Last Answer : c) Reheating cycles

Draw a neat sketch of regenerative feed heating.

Description : Draw a neat sketch of regenerative feed heating.

Last Answer : Regenerative Feed Heating  

Benefits Of Geothermal Heating And Cooling?

Description : Benefits Of Geothermal Heating And Cooling?

Last Answer : REAL GEOTHERMAL HEATING AND COOLING BENEFITSThe amount of benefits both financially and environmentally from using geothermal heating and cooling are higher than you might think.The efficiency of modern ... avoiding overtaxing local smokestacks that stick out of the electrical plants in your area.

What are the benefits of using geothermal heating?

Description : What are the benefits of using geothermal heating?

Last Answer : Yes, it's becoming a popular method because it's considered to be a green technology. They are a proven energy saving technology because they take advantage of the relativly constant temperatures found a few feet below the earth's surface.

what are the benefits of heating pad?

Description : what are the benefits of heating pad?

Last Answer : Technology has been advancing at a rapid rate in the past decade, because of which there are now a large number of state-of-the-art products available in the e-commerce market across several ... . While back pain is really that common, some people are unfortunate enough to suffer from chronic bac

Why are feed water heaters are used?

Description : Why are feed water heaters are used?

Last Answer : Regenerative Feedwater heaters are employed in steam power plants to improve the cycle efficiency. Also it increases the steam flow rate and reduces the steam flow to the condenser. They raise the temperature of the feed water before it enters the economizer

What consists of feed water and steam flow circuit in steam power?

Description : What consists of feed water and steam flow circuit in steam power?

Last Answer : The feed water and steam flow circuit consists of feed pump, economizer boiler drum super heater, turbine and condenser.

How dissolved oxygen control is achieved in feed water system?

Description : How dissolved oxygen control is achieved in feed water system?

Last Answer : Hydrazine is added to feed water system to control dissolved oxygen.  

Explain the differences between the two types of feed water heaters.

Description : Explain the differences between the two types of feed water heaters. 

Last Answer : a. Open type: In which bleed steam and condensed water are mixes directly and there is also dearation of steam.  b. Closed type (shell type): It has tubes and shell. The water passes through the tubes and steam passes through shell. The heat exchange takes placcce through the metal tubes. 

As shown in the illustration, what is the meaning of the numbers in brackets [ ] at location '31/33U'? EL-0100 A. Four separate devices with these part numbers feed signals into this point. B. There is a 33 kOhm bridge resistor at each of these locations in the wheelhouse. C. Wire '33K' continues on those four pages and connects to devices at the indicated coordinates. D. None of the above.

Description : As shown in the illustration, what is the meaning of the numbers in brackets [ ] at location '31/33U'? EL-0100 A. Four separate devices with these part numbers feed signals into this point. ... continues on those four pages and connects to devices at the indicated coordinates. D. None of the above.

Last Answer : Answer: C

Why feed valves are used?

Description : Why feed valves are used?

Last Answer : Feed valves are used to prevent back flow.  

Voltage feed back amplifier is a a) Shunt-Shunt b) Shunt-Series c) Series-Shunt d) Series- Series

Description : Voltage feed back amplifier is a a) Shunt-Shunt b) Shunt-Series c) Series-Shunt d) Series- Series

Last Answer : Ans: Shunt-Shunt

Junction breakdown occurs: a) With forward bias b) With reverse bias c) Under high temperature condition d) Because of excess heating of the diode

Description : Junction breakdown occurs: a) With forward bias b) With reverse bias c) Under high temperature condition d) Because of excess heating of the diode

Last Answer : Ans: B

Heating value of coal is approximately (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg

Description : Heating value of coal is approximately (A) 1000-2000 kcal / kg (B) 2000-4000 kcal / kg (C) 5000-6500 kcal / kg (D) 9000-10,500 kcal / kg

Last Answer : Ans: C

Hysteresis in a direct current generator is indicated by _____________. A. arcing at the brushes B. pulsating terminal current C. heating of the armature core D. hunting and over control

Description : Hysteresis in a direct current generator is indicated by _____________. A. arcing at the brushes B. pulsating terminal current C. heating of the armature core D. hunting and over control

Last Answer : Answer: C

What power is consumed by a heating element using a current of 20 amperes at 120 volts? A. 20 watts B. 66.67 watts C. 720 watts D. 2400 watts

Description : What power is consumed by a heating element using a current of 20 amperes at 120 volts? A. 20 watts B. 66.67 watts C. 720 watts D. 2400 watts

Last Answer : Answer: D

What is the wattage of a heating element drawing a current of 30 amperes, at 120 volts? A. 30 watts B. 99.97 watts C. 360 watts D. 3600 watts

Description : What is the wattage of a heating element drawing a current of 30 amperes, at 120 volts? A. 30 watts B. 99.97 watts C. 360 watts D. 3600 watts

Last Answer : Answer: D

An electric heating element supplied with 120 volts draws 15 amps. How much power will be consumed? A. 15 watts B. 45.57 watts C. 180 watts D. 1800 watts

Description : An electric heating element supplied with 120 volts draws 15 amps. How much power will be consumed? A. 15 watts B. 45.57 watts C. 180 watts D. 1800 watts

Last Answer : Answer: D

In the illustration, the diode between terminals 16 and 17 is to _________. EL-0046 A. insure that the voltage across the governor coil (EG-3P) never exceeds .6 VDC B. compensate for the temperature difference of the governor oil heating up C. protect the electronic governor from counter EMF D. act as a filter to prevent hunting

Description : In the illustration, the diode between terminals 16 and 17 is to _________. EL-0046 A. insure that the voltage across the governor coil (EG-3P) never exceeds .6 VDC B. compensate for the ... heating up C. protect the electronic governor from counter EMF D. act as a filter to prevent hunting

Last Answer : Answer: C

When soldering a printed circuit board component, you should be careful to prevent damage by _________. A. quickly heating the joints, using a high wattage iron B. using the soldering iron tip sparingly C. using only acid cord solder D. applying mechanical pressure to the joints being soldered

Description : When soldering a printed circuit board component, you should be careful to prevent damage by _________. A. quickly heating the joints, using a high wattage iron B. using the soldering iron tip sparingly C. using only acid cord solder D. applying mechanical pressure to the joints being soldered

Last Answer : Answer: B

The heating of conductors as a result of resistance in a distribution circuit causes a power loss expressed as _____________. A. line droop B. line loss C. IR drop D. hysteresis

Description : The heating of conductors as a result of resistance in a distribution circuit causes a power loss expressed as _____________. A. line droop B. line loss C. IR drop D. hysteresis

Last Answer : Answer: B

When the electric current is passed through conducting solution, there is change in colour of the solution. This indicates a) chemical effect of current b) the heating effect of current c) the magnetic effect of current d) the lightning effect of current

Description : When the electric current is passed through conducting solution, there is change in colour of the solution. This indicates a) chemical effect of current b) the heating effect of current c) the magnetic effect of current d) the lightning effect of current

Last Answer : a) chemical effect of current

An electric current can produce a) heating effect c)chemical effect b) magnetic effect d)chemical, magnetic and heating effect

Description : An electric current can produce a) heating effect c)chemical effect b) magnetic effect d)chemical, magnetic and heating effect

Last Answer : d)chemical, magnetic and heating effect

The temperature of resistance furnaces can be controlled by changing the: (A) applied voltage (B) number of heating elements (C) circuit configuration (D) All of the above

Description : The temperature of resistance furnaces can be controlled by changing the: (A) applied voltage (B) number of heating elements (C) circuit configuration (D) All of the above

Last Answer : Ans: D Temperature of resistance furnaces can be controlled by changing either applied voltage or by number of heating elements or by circuit configuration.

Electric ovens using heating elements of _______________ can produce temperature upto 3000°C. (A) Nickel (B) Graphite (C) Chromium (D) Iron

Description : Electric ovens using heating elements of _______________ can produce temperature upto 3000°C. (A) Nickel (B) Graphite (C) Chromium (D) Iron

Last Answer : Ans: C Chromium has high melting point.

In the heating process of the ________type a simple method of temperature control is possible by means of a special alloy which loses its magnetic properties at a particular high temperature and regains them when cooled to a temperature below this value. (A) Indirect induction over (B) core type induction furnace (C) coreless induction furnace (D) high frequency eddy current

Description : In the heating process of the ________type a simple method of temperature control is possible by means of a special alloy which loses its magnetic properties at a particular high temperature and regains ... ) core type induction furnace (C) coreless induction furnace (D) high frequency eddy current

Last Answer : Ans: D Magnetic property of alloy changes with change of the temperature and Heat is produced due to eddy current = i2R and i α f2

Out of the following methods of heating the one which is independent of supply frequency is (A) electric arc heating (B) induction heating (C) electric resistance heating (D) dielectric heating

Description : Out of the following methods of heating the one which is independent of supply frequency is (A) electric arc heating (B) induction heating (C) electric resistance heating (D) dielectric heating

Last Answer : (C) electric resistance heating