Junction breakdown occurs: a) With forward bias b) With reverse bias c) Under high temperature condition d) Because of excess heating of the diode

Junction breakdown occurs: a) With forward bias b) With reverse bias c) Under high temperature condition d) Because of excess heating of the diode
by

1 Answer

Answer :

Ans: B
by
selected by

Related questions

Avalanche breakdown in a diode occurs when a. Potential barrier is reduced to zero. b. Forward current exceeds certain value. c. Reverse bias exceeds a certain value. d. None of these

Description : Avalanche breakdown in a diode occurs when a. Potential barrier is reduced to zero. b. Forward current exceeds certain value. c. Reverse bias exceeds a certain value. d. None of these

Last Answer : c. Reverse bias exceeds a certain value.

Define i)P-N junction diode ii) Depletion layer iii)Forward bias iv)Reverse bias of P-N junction diode

Description : Define i)P-N junction diode ii) Depletion layer iii)Forward bias iv)Reverse bias of P-N junction diode

Last Answer : i)P-N junction diode: It is a semiconductor device in which half of its region is P-type and other half is N-type.  ii) Depletion layer: The region where free electrons and free holes are absent ... and negative terminal is connected to p-side of p-n junction diode, it is said to be reverse bias.

Depletion region of a junction is formed _________ (a) during the manufacturing process (b) under forward bias (c) under reverse bias (d) when temperature varies

Description : Depletion region of a junction is formed _________ (a) during the manufacturing process (b) under forward bias (c) under reverse bias (d) when temperature varies

Last Answer : (a) during the manufacturing process

Photo diode operates in the _______ condition (a) Forward bias (b) null (c) both a & d (d) reverse bias

Description : Photo diode operates in the _______ condition (a) Forward bias (b) null (c) both a & d (d) reverse bias

Last Answer : (d) reverse bias

When using an ohmmeter to test a semiconductor diode, you find a low resistance in both the forward and reverse bias directions. This indicates that the diode has a/an ____________. A. open B. short C. good resistive quality D. good capacitive quality

Description : When using an ohmmeter to test a semiconductor diode, you find a low resistance in both the forward and reverse bias directions. This indicates that the diode has a/an ____________. A. open B. short C. good resistive quality D. good capacitive quality

Last Answer : Answer: B

Which breakdown theory explains the action that takes place in a heavily doped PN-junction with a reverse bias of less than 5 volts?

Description : Which breakdown theory explains the action that takes place in a heavily doped PN-junction with a reverse bias of less than 5 volts?

Last Answer : Zener effect.

On increasing the reverse bias to a large value in a p-n junction diode current (a) Increases slowly (b) Remains fixed (c) Suddenly increases (d) Decreases slowly

Description : On increasing the reverse bias to a large value in a p-n junction diode current (a) Increases slowly (b) Remains fixed (c) Suddenly increases (d) Decreases slowly

Last Answer : (c) Suddenly increases

When reverse bias is applied to a junction diode, it

Description : When reverse bias is applied to a junction diode, it  1.increases the potential barrier 2.decreases the potential barrier 3.greatly increases the minority carrier current 4.greatly increases the majority carrier current 

Last Answer : When reverse bias is applied to a junction diode, it increases the potential barrier 

Explain the forward bias characteristics of a P-N Junction diode.

Description : Explain the forward bias characteristics of a P-N Junction diode. 

Last Answer : forward and reverse characteristics of P-N junction diode.

A device used to avoid the relay destroying the op-amp is A. diode B. LED C. reverse bias diode D. forward biased diode

Description :  A device used to avoid the relay destroying the op-amp is A. diode B. LED C. reverse bias diode D. forward biased diode

Last Answer : reverse bias diode

Describe the working of PN junction diode with neat sketch under forward biased condition.

Description : Describe the working of PN junction diode with neat sketch under forward biased condition.

Last Answer : If the p-region (anode) is connected to the positive terminal of the external DC source and nside (cathode) is connected to the negative terminal of the DC source then the biasing ... The large number of majority carriers crossing the junction constitutes a current called as the forward current.

The width of depletion layer of a P-N junction – (1) decreases with light doping (2) increases with heavy doping (3) is independent of applied voltage (4) is increased under reverse bias

Description : The width of depletion layer of a P-N junction – (1) decreases with light doping (2) increases with heavy doping (3) is independent of applied voltage (4) is increased under reverse bias

Last Answer : (4) is increased under reverse bias Explanation: The total width of the depletion region is a function of applied reverse-bias and impurity concentration. Forward bias decreases the depletion region width whilst reverse bias increases it.

The width of depletion layer of a P-N junction (1) decreases with light doping (2) increases with heavy doping (3) is independent of applied voltage (4) is increased under reverse bias

Description : The width of depletion layer of a P-N junction (1) decreases with light doping (2) increases with heavy doping (3) is independent of applied voltage (4) is increased under reverse bias

Last Answer :  is increased under reverse bias

In the illustration, the small battery and Rb are in the circuit to apply ________. EL-0022 A. forward bias to the emitter-base B. reverse bias to the emitter-base C. a 'reference charge' on the input capacitor D. a buffer between the input ground and the emitter ground

Description : In the illustration, the small battery and Rb are in the circuit to apply ________. EL-0022 A. forward bias to the emitter-base B. reverse bias to the emitter-base C. a 'reference charge' on the input capacitor D. a buffer between the input ground and the emitter ground

Last Answer : Answer: A

In the illustration, the large battery and R(L) are in the circuit to ________. EL-0022 A. forward bias the emitter-base B. reverse bias the emitter-base C. forward bias the emitter/collector D. reverse bias the emitter/collector

Description : In the illustration, the large battery and R(L) are in the circuit to ________. EL-0022 A. forward bias the emitter-base B. reverse bias the emitter-base C. forward bias the emitter/collector D. reverse bias the emitter/collector

Last Answer : Answer: D

In order to reverse bias in a PN junction, what terminal of a battery is connected to the P material?

Description : In order to reverse bias in a PN junction, what terminal of a battery is connected to the P material?

Last Answer : Negative.

A reverse bias pn junction has …………

Last Answer : A reverse bias pn junction has Almost no current.

While testing a semi-conductor diode with an ohmmeter, both the forward and reverse readings are almost in the infinity range. This would indicate that the unit is _____________. A. good B. open C. grounded D. shorted

Description : While testing a semi-conductor diode with an ohmmeter, both the forward and reverse readings are almost in the infinity range. This would indicate that the unit is _____________. A. good B. open C. grounded D. shorted

Last Answer : Answer: B

With forward bias to a pn junction , the width of depletion layer ………

Last Answer : With forward bias to a pn junction , the width of depletion layer Decreases.

The battery connections required to forward bias a pn junction are ……

Last Answer : The battery connections required to forward bias a pn junction are +ve terminal to p and –ve terminal to n.

Process of conversion low voltage to high voltage is called _______ (a) Rectification (b)forward bias (c) reverse bias (d) amplification

Description : Process of conversion low voltage to high voltage is called _______ (a) Rectification (b)forward bias (c) reverse bias (d) amplification

Last Answer : (d) amplification

When a reverse bias is applied to a diode, it will a. Raise the potential barrier b. Lower the potential barrier c. Increases the majority-carrier a current greatly d. None of these

Description : When a reverse bias is applied to a diode, it will a. Raise the potential barrier b. Lower the potential barrier c. Increases the majority-carrier a current greatly d. None of these

Last Answer : a. Raise the potential barrier

Explain with neat sketch construction of PIN Diode. Draw its characteristics in reverse bias mode.

Description : Explain with neat sketch construction of PIN Diode. Draw its characteristics in reverse bias mode. 

Last Answer : Construction A PIN diode is made up of three semiconductor materials; two heavily doped P- and N- type material separated by an intrinsic (undoped) semiconductor (I) as shown in above figure ... . This advantage allows the PIN diode to process even weak signals.  Characteristics

A diode in which the change in reverse bias voltage varies the capacitance is called as

Description : A diode in which the change in reverse bias voltage varies the capacitance is called as A) Varactor diode B) Switching diode C) Tunnel diode D) Zener-diode  

Last Answer : A diode in which the change in reverse bias voltage varies the capacitance is called as Varactor diode

To turn a UJT ON, the forward bias on emitter diode should be:

Description : To turn a UJT ON, the forward bias on emitter diode should be:  1. more than the peak point voltage 2. less than the peak point voltage 3. Equal to the peak point voltage 4. Equal to the stand - off voltage  

Last Answer : To turn a UJT ON, the forward bias on emitter diode should be: more than the peak point voltage 

How much time a diode takes to switch ON in forward bias

Description : How much time a diode takes to switch ON in forward bias condition.

Last Answer : t=0 sec.

can zener diode be used in forward bias?

Last Answer : Yes it can be, and it will act like a normal PN junction diode. The characteristic of ZENER diode is exactly same as PN junction diode in forward Bias.

Both LEDs and ILDs operate correctly with ∙ A. forward bias ∙ B. reverse bias ∙ C. neither forward nor reverse bias ∙ D. either forward or reverse bias

Description : Both LEDs and ILDs operate correctly with ∙ A. forward bias ∙ B. reverse bias ∙ C. neither forward nor reverse bias ∙ D. either forward or reverse bias

Last Answer : A. forward bias

Photodiodes operate properly with ∙ A. forward bias ∙ B. reverse bias ∙ C. neither forward nor reverse bias ∙ D. either forward or reverse bias

Description : Photodiodes operate properly with ∙ A. forward bias ∙ B. reverse bias ∙ C. neither forward nor reverse bias ∙ D. either forward or reverse bias

Last Answer : ∙ B. reverse bias

Photodiodes operate property with ∙ a. Forward bias ∙ b. Reverse bias ∙ c. Neither A or B ∙ d. Either A or B

Description : Photodiodes operate property with ∙ a. Forward bias ∙ b. Reverse bias ∙ c. Neither A or B ∙ d. Either A or B

Last Answer : ∙ b. Reverse bias

Both LEDs and ILDs operate correctly with ∙ a. Forward bias ∙ b. Reverse bias ∙ c. Neither A or B ∙ d. Either A or B

Description : Both LEDs and ILDs operate correctly with ∙ a. Forward bias ∙ b. Reverse bias ∙ c. Neither A or B ∙ d. Either A or B

Last Answer : a. Forward bias

What is the difference between forward and reverse bias?

Description : What is the difference between forward and reverse bias?

Last Answer : Forward bias is a PN junction bias which allows current to flow through the junction. Forward bias decreases the resistance of the depletion layer. Reverse bias is a PN junction bias that allows only ... Positive polarity on the n-type material and negative polarity to the p-type material.

The reverse breakdown phenomenon in a zener diode is known as

Description : The reverse breakdown phenomenon in a zener diode is known as

Last Answer : The reverse breakdown phenomenon in a zener diode is known as Avalanche effect

For normal operation of a transistor, the collector base junction is kept (a) Unbiased (b) forward biased (c) reverse biased (d) none

Description : For normal operation of a transistor, the collector base junction is kept (a) Unbiased (b) forward biased (c) reverse biased (d) none

Last Answer : (c) reverse biased

In the illustrated circuit, the amplifier is connected in what basic configuration? EL-0022 A. common base B. reverse bias, negative feedback C. common emitter D. common collector

Description : In the illustrated circuit, the amplifier is connected in what basic configuration? EL-0022 A. common base B. reverse bias, negative feedback C. common emitter D. common collector

Last Answer : Answer: C

An ohmmeter used to test for front-to-back resistance of a PN junction diode should produce roughly what ratio? A. 100:01:00 B. 500:01:00 C. 1000:01:00 D. 5000:01:00

Description : An ohmmeter used to test for front-to-back resistance of a PN junction diode should produce roughly what ratio? A. 100:01:00 B. 500:01:00 C. 1000:01:00 D. 5000:01:00

Last Answer : Answer: A

For highly doped diode: a) Zener breakdown is likely to take place b) Avalanche breakdown is likely to take place c) Either (a) or (b) can take place d) Neither (a) nor (b) can take place

Description : For highly doped diode: a) Zener breakdown is likely to take place b) Avalanche breakdown is likely to take place c) Either (a) or (b) can take place d) Neither (a) nor (b) can take place

Last Answer : Ans: A

In the illustration, the component VR2 on the A1 AMPLIFIER MODULE is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply from common B. a variable resistor diode to control the output to terminal 1 that controls the input to terminal 10 C. a zener diode that regulates the voltage to terminal 2 at 9.1 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Description : In the illustration, the component VR2 on the A1 AMPLIFIER MODULE is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply from common B. a variable resistor diode to control the output to terminal ... 2 at 9.1 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Last Answer : Answer: C

In the illustration, the component VR1 on the A1 AMPLIFIER MODULE is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply from common B. a variable resistor diode to control the output to terminal 9 that controls the input to terminal 10 C. a zener diode that regulates the voltage to terminal 9 at 6.6 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Description : In the illustration, the component VR1 on the A1 AMPLIFIER MODULE is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply from common B. a variable resistor diode to control the output to ... terminal 9 at 6.6 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Last Answer : Answer: A

In the illustration, the component VR1 on the A1A1 PCB is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply B. a variable resistor diode to control the output to terminal 9 that controls the input to terminal 10 C. a zener diode that regulates the voltage to terminal 9 at 6.6 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Description : In the illustration, the component VR1 on the A1A1 PCB is _________. EL-0060 A. a zener diode to regulate the +9 volt power supply B. a variable resistor diode to control the output to terminal 9 that controls ... terminal 9 at 6.6 volts DC D. a tunnel diode with a breakdown voltage of 6.6 Volts DC

Last Answer : Answer: C

Component 'CR1' shown in the illustration is called a/an _______________. EL-0085 A. avalanche diode B. Zener diode C. breakdown diode D. all of the above

Description : Component 'CR1' shown in the illustration is called a/an _______________. EL-0085 A. avalanche diode B. Zener diode C. breakdown diode D. all of the above

Last Answer : Answer: D

The purpose of a heat sink, as frequently used with transistors, is to ____________. A. prevent excessive temperature rise B. compensate for excessive doping C. increase the reverse current D. decrease the forward current

Description : The purpose of a heat sink, as frequently used with transistors, is to ____________. A. prevent excessive temperature rise B. compensate for excessive doping C. increase the reverse current D. decrease the forward current

Last Answer : Answer: A

In the illustration, the diode between terminals 16 and 17 is to _________. EL-0046 A. insure that the voltage across the governor coil (EG-3P) never exceeds .6 VDC B. compensate for the temperature difference of the governor oil heating up C. protect the electronic governor from counter EMF D. act as a filter to prevent hunting

Description : In the illustration, the diode between terminals 16 and 17 is to _________. EL-0046 A. insure that the voltage across the governor coil (EG-3P) never exceeds .6 VDC B. compensate for the ... heating up C. protect the electronic governor from counter EMF D. act as a filter to prevent hunting

Last Answer : Answer: C

Silicon diodes designed for a specific reverse breakdown voltage, become useful as an electronic power supply voltage regulator, called _____________. A. tunnel diodes B. hot-carrier diodes C. compensating diodes D. Zener diodes

Description : Silicon diodes designed for a specific reverse breakdown voltage, become useful as an electronic power supply voltage regulator, called _____________. A. tunnel diodes B. hot-carrier diodes C. compensating diodes D. Zener diodes

Last Answer : Answer: D

In a tunnel diode, electrons can tunnel through the P-N junction mainly because

Description : In a tunnel diode, electrons can tunnel through the P-N junction mainly because  1.impurity level is low 2.they have high energy 3.barrier potential is very low 4.depletion layer is extremely thin 

Last Answer : In a tunnel diode, electrons can tunnel through the P-N junction mainly because depletion layer is extremely thin 

Tunnel diode is a: a) Power diode b) Has light doping c) Has heavy doping d) Is a reverse recovery diode Ans: C 76.LEDs are fabricated from: a) Silicon b) Germanium c) Si or Ge d) Gallium arsenide

Description : Tunnel diode is a: a) Power diode b) Has light doping c) Has heavy doping d) Is a reverse recovery diode Ans: C 76.LEDs are fabricated from: a) Silicon b) Germanium c) Si or Ge d) Gallium arsenide

Last Answer : Ans: D

What type of bias opposes the PN junction barrier?

Description : What type of bias opposes the PN junction barrier?

Last Answer : Forward.

If the three-phase motor, shown in the illustrated schematic diagram, is running in the forward direction, which of the following actions must occur before the motor will reverse rotation? EL-0011 A. Normally-closed contacts '4'-'5' must open. B. Normally- open contacts '2'-'3' must close. C. 'L1' and 'L3' must be interchanged via the 'R' contacts. D. All of the above.

Description : If the three-phase motor, shown in the illustrated schematic diagram, is running in the forward direction, which of the following actions must occur before the motor will reverse rotation? EL-0011 A. Normally-closed ... 'L1' and 'L3' must be interchanged via the 'R' contacts. D. All of the above.

Last Answer : Answer: C