Mention parameters monitored by turbovisory instruments.

Mention parameters monitored by turbovisory instruments. 
by

1 Answer

Answer :

a. Speed governing.

b. Eccentricity monitoring.

c. Vibration monitoring.

d. Valve position monitoring.

e. Temperature monitoring.

f. Pressure monitoring.

g. Level monitoring.

h. Gas leak monitoring.

i. Conductivity monitoring.

j. Flow monitoring.
by

Related questions

Which one of the following sets of parameters should be monitored for determining safe operation of journal bearing? [IES-2000] Oil pressure, bearing metal temperature and bearing vibration (b) Bearing vibration, oil pressure and speed of shaft (c) Bearing metal temperature and oil pressure (d) Oil pressure and bearing vibration

Description : Which one of the following sets of parameters should be monitored for determining safe operation of journal bearing? [IES-2000] Oil pressure, bearing metal temperature and bearing vibration (b) ... shaft (c) Bearing metal temperature and oil pressure (d) Oil pressure and bearing vibration

Last Answer : Oil pressure, bearing metal temperature and bearing vibration

Mention any two parameters where Sri Lanka has scored over India in HDI. -SST 10th

Description : Mention any two parameters where Sri Lanka has scored over India in HDI. -SST 10th

Last Answer : (i) Per capital income (ii) Literacy rate

Why are people uncomfortable with being monitored? Why exactly is privacy so damn important?

Description : Why are people uncomfortable with being monitored? Why exactly is privacy so damn important?

Last Answer : Privacy is a possession, just like cash, or diamonds. Invaded is stolen.

In what ways have you been reminded of how much our online activity is tracked and monitored?

Description : In what ways have you been reminded of how much our online activity is tracked and monitored?

Last Answer : I know FB suggests friends based on my proximity to them. Seems like when location services peggs two people as being colocated for a certain length of time it assumes you may want to friend them. A little creepy.

Discussing Osama Bin Laden - Is ask-public being monitored by the FBI, CIA or NSA?

Description : Discussing Osama Bin Laden - Is ask-public being monitored by the FBI, CIA or NSA?

Last Answer : Sure they are. Echelon is real, and at least in my country the military intelligence monitors all internet traffic across the border. I would be surprised if it wasn't filtered by some other countries intelligence ... by the way, I find is most likely dead. Not that it seems to matter much anymore.

What type of energy is monitored by forecasting future space weather?

Description : What type of energy is monitored by forecasting future space weather?

Last Answer : Need answer

What should the patient be monitored for after receiving Narcan?

Description : What should the patient be monitored for after receiving Narcan?

Last Answer : what medication is used to treat iron toxicity

What metrics can be monitored through cloudwatch without being charged?

Description : What metrics can be monitored through cloudwatch without being charged?

Last Answer : Feel Free to Answer

Are car seat regulations monitored by the government ?

Description : Are car seat regulations monitored by the government ?

Last Answer : Yes, the government mandates every child be in a car seat until he or she is at least 3 years old. After that age, it is important you switch to a front facing car seat.

How are physical activities monitored through an online school?

Description : How are physical activities monitored through an online school?

Last Answer : Its really based on an honor system. You put the info down and it is recored. But its really better to just take a physical course since its easier...

A 54-year-old woman with severe hypercholesterolemia is to be treated with a combination of niacin and atorvastatin. With this drug combination, it is important that the patient be monitored closely for signs of (a) Agranulocytosis (b) Gallstones (c) Lactic acidosis (d) Myopathy (e) Thyrotoxicosis

Description : A 54-year-old woman with severe hypercholesterolemia is to be treated with a combination of niacin and atorvastatin. With this drug combination, it is important that the patient be monitored closely for signs of (a) Agranulocytosis (b) Gallstones (c) Lactic acidosis (d) Myopathy (e) Thyrotoxicosis

Last Answer : Ans: D

What database aspects should be monitored? (for DBA

Description : What database aspects should be monitored? (for DBA

Last Answer : One should implement a monitoring system to constantly monitor the following aspects of a database. Writing custom scripts, implementing Oracle's Enterprise Manager, or buying a third-party monitoring product ... up? . Objects getting close to their max extents . User and process limits reached

How the project work will be carried out, monitored, and controlled? These questions are answered in which phase of the project management? (A) Initiating (B) Planning (C) Executing (D) Closing

Description : How the project work will be carried out, monitored, and controlled? These questions are  answered in which phase of the project management? (A) Initiating (B) Planning (C) Executing (D) Closing

Last Answer : (B) Planning

Which of the following is a SaaS characteristic? a) The typical license is subscription-based or usage-based and is billed on a recurring basis b) The software is available over the Internet globally through a browser on demand c) The software and the service are monitored and maintained by the vendor d) All of the mentioned

Description : Which of the following is a SaaS characteristic? a) The typical license is subscription-based or usage-based and is billed on a recurring basis b) The software is available over the Internet ... The software and the service are monitored and maintained by the vendor d) All of the mentioned

Last Answer : All of the mentioned

Which of the following is a SaaS characteristic? A. The typical license is subscription-based or usage-based and is billed on a recurring basis B. The software is available over the Internet globally through a browser on demand C. The software and the service are monitored and maintained by the vendor D. All of the above

Description : Which of the following is a SaaS characteristic? A. The typical license is subscription-based or usage-based and is billed on a recurring basis B. The software is available over the Internet globally ... . The software and the service are monitored and maintained by the vendor D. All of the above

Last Answer : All of the above

Which of the following is a SaaS characteristic? a) The typical license is subscription-based or usage-based and is billed on a recurring basis b) The software is available over the Internet globally through a browser on demand c) The software and the service are monitored and maintained by the vendor d) All of the mentioned

Description : Which of the following is a SaaS characteristic? a) The typical license is subscription-based or usage-based and is billed on a recurring basis b) The software is available over the Internet globally ... The software and the service are monitored and maintained by the vendor d) All of the mentioned

Last Answer : All of the mentioned

The patient receiving mitoxantrone (Novantrone) for treatment of secondary progressive multiple sclerosis (MS) is closely monitored for a) leukopenia and cardiac toxicity. Mitoxantrone is an antineoplastic agent used primarily to treat leukemia and lyphoma but is also used to treat secondary progressive MS. Patients need to have laboratory tests ordered and the results closely monitored due to the potential for leukopenia and cardiac toxicity.

Description : The patient receiving mitoxantrone (Novantrone) for treatment of secondary progressive multiple sclerosis (MS) is closely monitored for a) leukopenia and cardiac toxicity. Mitoxantrone is an ... d) hypoxia. Patients receiving mitoxantrone are closely monitored for leukopenia and cardiac toxicity.

Last Answer : a) leukopenia and cardiac toxicity. Mitoxantrone is an antineoplastic agent used primarily to treat leukemia and lyphoma but is also used to treat secondary progressive MS. Patients need to have ... ordered and the results closely monitored due to the potential for leukopenia and cardiac toxicity.

Which information is stored in a monitoring segment of the alert monitoring infrastructure within the Computing Center Management System (CCMS)? Note: there are 2 corrects answered to this questions A. Current monitoring data of monitored components B. The coding of data collectors C. Open alerts within CCMS D. Monitoring definitions

Description : Which information is stored in a monitoring segment of the alert monitoring infrastructure within the Computing Center Management System (CCMS)? Note: there are 2 corrects answered to this questions A. ... B. The coding of data collectors C. Open alerts within CCMS D. Monitoring definitions

Last Answer : A. Current monitoring data of monitored components B. The coding of data collectors

While giving CPR which of the following is considered: a. It achieves 30% of cardiac output with 60 compressions per minute. b. It achieves normal blood oxygen levels with 12 reseparations per minute. c. You have to check compression point by thumbing before starting compression. d. Cardiac output has to be monitored regularly by checking radial pulse.

Description : While giving CPR which of the following is considered: a. It achieves 30% of cardiac output with 60 compressions per minute. b. It achieves normal blood oxygen levels with 12 reseparations ... starting compression. d. Cardiac output has to be monitored regularly by checking radial pulse.

Last Answer : c. You have to check compression point by thumbing before starting compression.

While giving CPR which of the following is correct: A. It achieves 30% of cardiac output with 60 compressions per minute B. It achieves normal blood oxygen levels with 12 reseparations per minute C. You have to check compression point by thumping before starting compression D. Cardiac output has to be monitored regularly by checking radial pulse.

Description : While giving CPR which of the following is correct: A. It achieves 30% of cardiac output with 60 compressions per minute B. It achieves normal blood oxygen levels with 12 ... thumping before starting compression D. Cardiac output has to be monitored regularly by checking radial pulse.

Last Answer : C. You have to check compression point by thumping before starting compression

Which of the following parameters is not a primary parameter? a) Resistance b) Attenuation constant c) Capacitance d) Conductance

Description : Which of the following parameters is not a primary parameter? a) Resistance b) Attenuation constant c) Capacitance d) Conductance

Last Answer : Ans: B

Which plant parameters shown in the illustration would produce an alarm if they exceeded preset values? EL-0094 A. SME #7 CYL. EXH. and L.O. TO RDCN. GR. B. L.O. PRESS. TO MN. ENG. and PME #3 MN. BRG. C. L.O. PRESS. TO MN. ENG. and L.O. TO RDCN. GR. D. PME #3 MN. BRG. and SME #7 CYL. EXH.

Description : Which plant parameters shown in the illustration would produce an alarm if they exceeded preset values? EL-0094 A. SME #7 CYL. EXH. and L.O. TO RDCN. GR. B. L.O. PRESS. TO MN. ENG. and PME #3 MN. BRG. C. L.O. PRESS. TO MN. ENG. and L.O. TO RDCN. GR. D. PME #3 MN. BRG. and SME #7 CYL. EXH.

Last Answer : Answer: D

Which plant parameters shown in the illustration would produce an alarm if they fell below preset values? EL-0094 A. SME #7 CYL. EXH. and L.O. PRESS. TO RDCN. GR. B. L.O. PRESS TO MN. ENG. and PME #3 MN. BRG. C. L.O. PRESS. TO MN. ENG and L.O. PRESS. TO RDCN. GR. D. PME #3 MN. BRG. and SME #7 CYL. EXH.

Description : Which plant parameters shown in the illustration would produce an alarm if they fell below preset values? EL-0094 A. SME #7 CYL. EXH. and L.O. PRESS. TO RDCN. GR. B. L.O. PRESS TO MN. ENG. and PME #3 MN. BRG. C. ... . TO MN. ENG and L.O. PRESS. TO RDCN. GR. D. PME #3 MN. BRG. and SME #7 CYL. EXH.

Last Answer : Answer: C

What parameters or technical particulars are important to be considered while designing protection scheme of the transformer?

Description : What parameters or technical particulars are important to be considered while designing protection scheme of the transformer?

Last Answer : 1.Network Diagram showing the position of the transformer in the system 2.kVA or MVA rating of the transformer 3.Fault Level at the transformer 4.Voltage Ratio 5.Winding Connections 6.Per Unit ... Oil Filled 11.Length and area of cross section of the connecting leads between CTs and Relay Panel

To design the buck converter, what are basic & essential information (parameters) we need to get from the Customer?

Description : To design the buck converter, what are basic & essential information (parameters) we need to get from the Customer?

Last Answer : We need the following inputs from the customer,Output Voltage VOUTInput Voltage VINOutput Current (load current) IOUTMaximum Ripple voltage allowed at the output sideEfficiency of the converter

For Selecting MOSFET, what are the major parameters we have to consider in the datasheet?

Description : For Selecting MOSFET, what are the major parameters we have to consider in the datasheet?

Last Answer : In MOSFET datasheet, we have to focus on following parameters: Drain to Source Voltage VDSSOn state Drain to Source Resistance RDS(ON)Reverse Recovery Current IRRReverse Recovery Charge ... Charge QG Body Diode Characteristics ID at ambient temperature Channel power dissipation Channel temperature

What are the various parameters we have to consider, while selecting IGBT?

Description : What are the various parameters we have to consider, while selecting IGBT?

Last Answer : In IGBT datasheet, we have to focus on following parameters Collector to emitter voltage VCESCollector Current ICCollector Dissipation PCJunction Temperature Tj

What are the protective parameters to changeover AVR auto to manual?

Description : What are the protective parameters to changeover AVR auto to manual? 

Last Answer : a. PT supply fail. b. Auto pulse fail. c. Supply of limiter fail. d. Supply of auto channel fail. e. Regulated supply fail. f. High auto reference. 

If sending end voltage is Vs at no-load in a transmission line then receiving end voltage is if ABCD parameters of line is given a) Vs b) Vs/A c) 0 d) Infinity

Description : If sending end voltage is Vs at no-load in a transmission line then receiving end voltage is if ABCD parameters of line is given a) Vs b) Vs/A c) 0 d) Infinity

Last Answer : Ans: Vs/A

Which of the following instruments have least torque/weight ratio: a) Dynamometer type b) PMMC c) Attraction type moving iron d) Repulsion type moving iron

Description : Which of the following instruments have least torque/weight ratio: a) Dynamometer type b) PMMC c) Attraction type moving iron d) Repulsion type moving iron

Last Answer : Ans: A

Electrostatic type instruments are mainly used for measurement of: a) Heavy currents b) Low currents c) Low voltages d) High voltages

Description : Electrostatic type instruments are mainly used for measurement of: a) Heavy currents b) Low currents c) Low voltages d) High voltages

Last Answer : Ans: D

Electrostatic forces in high voltage circuits cause indicating instruments to give ____________. A. parallax readings B. highly intuitive readings C. highly accurate readings D. inaccurate readings

Description : Electrostatic forces in high voltage circuits cause indicating instruments to give ____________. A. parallax readings B. highly intuitive readings C. highly accurate readings D. inaccurate readings

Last Answer : Answer: D

An internal resistance is placed in series with the meter movement of which of the following instruments? A. AC ammeter B. DC ammeter C. DC voltmeter D. Frequency meter

Description : An internal resistance is placed in series with the meter movement of which of the following instruments? A. AC ammeter B. DC ammeter C. DC voltmeter D. Frequency meter

Last Answer : Answer: C

Which of the instruments listed could be use to locate a grounded field coil in a synchronous motor? A. Ammeter B. Voltmeter C. Megohmmeter D. Frequency meter

Description : Which of the instruments listed could be use to locate a grounded field coil in a synchronous motor? A. Ammeter B. Voltmeter C. Megohmmeter D. Frequency meter

Last Answer : Answer: C

Which of the instruments listed is used to check insulation resistance? A. Magneto B. Megohmmeter C. Dynamometer D. Rheostat

Description : Which of the instruments listed is used to check insulation resistance? A. Magneto B. Megohmmeter C. Dynamometer D. Rheostat

Last Answer : Answer: B

In order to take a current reading with a 'clamp-on' ammeter, the instrument's jaws _________________. A. should remain open B. cannot touch the adjacent conductor C. must be fully closed D. will act as a transformer primary

Description : In order to take a current reading with a 'clamp-on' ammeter, the instrument's jaws _________________. A. should remain open B. cannot touch the adjacent conductor C. must be fully closed D. will act as a transformer primary

Last Answer : Answer: C

Which of the instruments listed should always be connected in series with a circuit? A. Ammeter B. Megohmmeter C. Wattmeter D. Voltmeter

Description : Which of the instruments listed should always be connected in series with a circuit? A. Ammeter B. Megohmmeter C. Wattmeter D. Voltmeter

Last Answer : Answer: A

Current measuring instruments must always be connected in _____________. A. series with a circuit B. parallel with a circuit C. series-parallel with a circuit D. delta with the shunt

Description : Current measuring instruments must always be connected in _____________. A. series with a circuit B. parallel with a circuit C. series-parallel with a circuit D. delta with the shunt

Last Answer : Answer: A

In order to increase its range of measurement, a resistance would be placed in series with which of the following instruments? A. DC voltmeter B. DC ammeter C. frequency meter D. power factor meter

Description : In order to increase its range of measurement, a resistance would be placed in series with which of the following instruments? A. DC voltmeter B. DC ammeter C. frequency meter D. power factor meter

Last Answer : Answer: A

Which of the listed instruments can be best used to locate a grounded field coil in a synchronous motor? A. Frequency meter B. Megohmmeter C. Voltmeter D. Multimeter

Description : Which of the listed instruments can be best used to locate a grounded field coil in a synchronous motor? A. Frequency meter B. Megohmmeter C. Voltmeter D. Multimeter

Last Answer : Answer: B

Why we are using only 50 Hz for single and three phase electrical instruments?

Description : Why we are using only 50 Hz for single and three phase electrical instruments?

Last Answer : Synchronization condition: There are five conditions that must be met before the synchronization process takes place. The alternator must have equal line voltage, frequency, phase sequence, phase angle and waveform to that ... in the US and North America and 50 Hz in most of the rest of the world.

What is the difference between megger test equipment and contact resistance meter test instruments?

Description : What is the difference between megger test equipment and contact resistance meter test instruments?

Last Answer : Megger test equipment used to measure cable electric resistance, conductor continuity, phase identification. Contact resistance meter test instruments used to measure low resistance like relays, contactors.

What is the purpose of instruments?

Description : What is the purpose of instruments?

Last Answer : The purpose of instruments is to measure, safeguard the process for efficient plant operation. Instruments are very accurate and fast acting. This accuracy and speed is not possible by human. ... or some where there may high radiation field. In such cases instruments provide remote operation.  

What are the advantages of digital instruments over analog instruments?

Description : What are the advantages of digital instruments over analog instruments?

Last Answer : a. Human errors are avoided (comparative error) because the output is displayed in form of numbers.  b. Power consumption of digital meters are low as compared to analog meters. 

Give three operating forces acting on indicating instruments.

Description : Give three operating forces acting on indicating instruments.

Last Answer : a. Deflecting force. b. Controlling force. c. Damping force.

What are three types of secondary instruments?

Description : What are three types of secondary instruments?  

Last Answer : The three types of secondary instruments are, a. Indicating type: It only indicates the electrical quantity measured. Example: Ammeter, Voltmeter, Frequency meter etc. b. Integrating type: It ... as well as indicates the electrical quantity being measured. Example: 3 pen graphical recorder. 

What are the two main classifications of analog instruments?

Description : What are the two main classifications of analog instruments? 

Last Answer : The two main classifications of instruments are, a. Absolute instruments. Example tangent galvanometer. b. Secondary instruments. Example ammeter, voltmeter. Analog instruments are classified according ... Example frequency meter, voltmeter, etc. Principles they work are moving coil, induction. 

What are the possible errors in induction (energy meter) measuring instruments?

Description : What are the possible errors in induction (energy meter) measuring instruments?

Last Answer : a. Phase error: Field flux in induction meter does not lag 90° behind the supply voltage due to its resistance. This can be adjusted by copper shading rings, which are placed at the central limb of the ... to prevent rotation, when one of the holes comes under one of the pole of the shunt magnet.

What are the classifications of secondary instruments?

Description : What are the classifications of secondary instruments?

Last Answer : a. Indicating instruments. b. Recording instruments. c. Integrating instruments.