What are the protective parameters to changeover AVR auto to manual?

What are the protective parameters to changeover AVR auto to manual? 
by

1 Answer

Answer :

a. PT supply fail.

b. Auto pulse fail.

c. Supply of limiter fail.

d. Supply of auto channel fail.

e. Regulated supply fail.

f. High auto reference. 
by

Related questions

Why AVR changes over to manual on AVR PT fuse failure?

Description : Why AVR changes over to manual on AVR PT fuse failure? 

Last Answer : Because loss of feedback to voltage corrector.  

What is the difference between an auto reset and manual reset overload relay?

Description : What is the difference between an auto reset and manual reset overload relay?

Last Answer : a. Auto reset relay closes its contacts when the bimetallic strip gets cooled. In manual reset relay we have to manually reset the relay because even though bimetallic strip cools its contacts are not ... . Manual over load relay is reseted by pushing the reset button provided on the MCC cell. 

What is Automatic Voltage regulator (AVR)?

Description : What is Automatic Voltage regulator (AVR)?

Last Answer : AVR is an abbreviation for Automatic Voltage Regulator. It is important part in Synchronous Generators; it controls the output voltage of the generator by controlling its excitation current. Thus it can control the output Reactive Power of the Generator.

What Is Automatic Voltage Regulator(avr)?

Description : What Is Automatic Voltage Regulator(avr)?

Last Answer : AVR is an abbreviation for Automatic Voltage Regulator. It is important part in Synchronous Generators, it controls the output voltage of the generator by controlling its excitation current. Thus it can control the output Reactive Power of the Generator.

What is Automatic Voltage regulator (AVR)?

Description : What is Automatic Voltage regulator (AVR)?

Last Answer :  AVR is an abbreviation for Automatic Voltage Regulator.  It is important part in Synchronous Generators; it controls the output voltage of the generator by controlling its excitation current. Thus it can control the output Reactive Power of the Generator.

What is the merchandise changeover like in places without a change of seasons?

Description : What is the merchandise changeover like in places without a change of seasons?

Last Answer : Here in the islands, we get a few racks of winter coats that people buy for trips to colder climates, but other than that, it really doesn’t change. You can buy swimsuits all year long.

Is it true that the clock changeover is over?

Description : I read on the facebbes that they voted in Europe so that there would be no more hours of change. Is that true or fake?

Last Answer : I think it's true, but I don't think it applies to Hungary.

Changeover from D.C to A.C

Description : Changeover from D.C to A.C  

Last Answer : In later half of eighties, in nineteenth century, it was proposed to have a power system with 3- phase, 50 Hz A.C generation, transmission and distribution networks. Once a.c system was adopted, transmission of ... favor of A.C supply system own the debate on switching over from D.C to A.C system. 

Smart link to your app should auto-redirect based on which of the following parameters? A. Device type & OS B. Screen size C. OEM Brand D. All of the above

Description : Smart link to your app should auto-redirect based on which of the following parameters? A. Device type & OS B. Screen size C. OEM Brand D. All of the above

Last Answer : A. Device type & OS

In your opinion, why are auto makers phasing out the manual transmission on a lot of their vehicles?

Description : In your opinion, why are auto makers phasing out the manual transmission on a lot of their vehicles?

Last Answer : I know a few people will turn their nose up and huff, by saying automatic transmissions are now just as economical as a manual so why bother with a manual. BUT, that doesn’t really answer the question, are they scaling back or phasing out because people have lost the skill, or are to lazy?

which is the best kardon avr?

Description : which is the best kardon avr?

Last Answer : It all depends on what you're looking for in your AVR. I'd go with a basic one if you don't need some of the more advanced features.

A database of information that is maintained by human editors and lists websites by category and subcategory with categorization is known as: 1. A search directory 2. Automated voice response (AVR) 3. Apps 4. Search Engine Optimization (SEO

Description : A database of information that is maintained by human editors and lists websites by category and subcategory with categorization is known as: 1. A search directory 2. Automated voice response (AVR) 3. Apps 4. Search Engine Optimization (SEO

Last Answer : A search directory

If the AVR, is defective, when additional loads come on will the generator be able to take it?

Description : If the AVR, is defective, when additional loads come on will the generator be able to take it?

Last Answer : No. Ask E/O and refer to Dennis T Hall.

Which instruction set architecture is used in Raspberry Pi? A. X86 B. MSP C. AVR D. ARM

Description : Which instruction set architecture is used in Raspberry Pi? A. X86 B. MSP C. AVR D. ARM

Last Answer : D. ARM 

AVR microcontroller executes most of the instruction in _________________. A. Single execution cycle. B. Double execution cycle. C. Both A& B D. None of the above.

Description : AVR microcontroller executes most of the instruction in _________________. A. Single execution cycle. B. Double execution cycle. C. Both A& B D. None of the above.

Last Answer : architecture of embedded system consists of

AVR stands for_____________________. A. Advanced Virtual RISC. B. Alf-Egil Bogen and Vegard Wollan RISC C. Both A & B D. None of the above

Description : AVR stands for_____________________. A. Advanced Virtual RISC. B. Alf-Egil Bogen and Vegard Wollan RISC C. Both A & B D. None of the above

Last Answer : C. Both A & B 

______________ was developed in the year 1996 by ATMEL Corporation A. PIC B. AVR C. ARM D. ASIC

Description : ______________ was developed in the year 1996 by ATMEL Corporation A. PIC B. AVR C. ARM D. ASIC

Last Answer : B. AVR 

______________ is the smallest microcontrollers which can be programmed to perform a large range of tasks. A. PIC microcontrollers B. ARM microcontrollers C. AVR microcontrollers D. ASIC microcontrollers

Description : ______________ is the smallest microcontrollers which can be programmed to perform a large range of tasks. A. PIC microcontrollers B. ARM microcontrollers C. AVR microcontrollers D. ASIC microcontrollers

Last Answer : A. PIC microcontrollers 

Compare features of PIC and AVR microcontrollers

Description : Compare features of PIC and AVR microcontrollers

Last Answer : Parameters PIC AVR Bus width 8/16/32-bit 8/32-bit Communication Protocols UART, USART, LIN, CAN, Ethernet, SPI, I2C UART, USART, SPI, I2C, (special ... Average Atmel Popular Microcontrollers PIC18fXX8, PIC16f88X, PIC32MXX Atmega8, 16, 32, Arduino Community

The harmonic currents in a power transformer does not cause increase in: a) Secondary voltage b) Core loss c) Copper loss d) Magnetic interference with protective relays

Description : The harmonic currents in a power transformer does not cause increase in: a) Secondary voltage b) Core loss c) Copper loss d) Magnetic interference with protective relays

Last Answer : Ans: A

Routine maintenance of dry-type transformers should include ______________. A. preventing the entrance of water from broken pipe lines steam lines B. keeping protective surfaces and insulating bushings free of dirt and conductive debris C. periodic testing of insulation resistance with a megger D. all of the above

Description : Routine maintenance of dry-type transformers should include ______________. A. preventing the entrance of water from broken pipe lines steam lines B. keeping protective surfaces and insulating bushings free of ... debris C. periodic testing of insulation resistance with a megger D. all of the above

Last Answer : Answer: D

Complete controller maintenance includes _____________. A. periodic testing of protective devices B. checking for loose or worn contacts and weak springs C. maintaining a sufficient supply of spare parts D. all of the above

Description : Complete controller maintenance includes _____________. A. periodic testing of protective devices B. checking for loose or worn contacts and weak springs C. maintaining a sufficient supply of spare parts D. all of the above

Last Answer : Answer: D

A commutator's protective oxide film can be destroyed by _________________. A. periods of low humidity B. very low brush current density C. improper brush grade D. all of the above

Description : A commutator's protective oxide film can be destroyed by _________________. A. periods of low humidity B. very low brush current density C. improper brush grade D. all of the above

Last Answer : Answer: D

A three-phase, induction-type motor experiences an open in one phase. Which of the listed automatic protective devices will prevent the machine from being damaged? A. Overspeed trip B. Thermal overload relay C. Three-pole safety switch D. Magnetic blowout coil

Description : A three-phase, induction-type motor experiences an open in one phase. Which of the listed automatic protective devices will prevent the machine from being damaged? A. Overspeed trip B. Thermal overload relay C. Three-pole safety switch D. Magnetic blowout coil

Last Answer : Answer: B

A common type of protective covering used on electrical conductors is _____________. A. plain paper B. fibrous braid C. silver sheathing D. babbitt sheathing

Description : A common type of protective covering used on electrical conductors is _____________. A. plain paper B. fibrous braid C. silver sheathing D. babbitt sheathing

Last Answer : Answer: B

What is protective relay?

Description : What is protective relay?

Last Answer : It is an electrical device designed to initiate the isolation of a part of the electrical installation, or to operate an alarm signal, in the event of abnormal condition or a fault. In ... Breaker) after sensing the fault and helps to isolate the fault system from the healthy electrical system

What is meant by protective angle? Give its value for reliable operation?

Description : What is meant by protective angle? Give its value for reliable operation?

Last Answer : Protective angle is the vertical angle through the ground wire axis and the line passing from the ground wire axis to the outermost phase conductor. Its value for reliable protection is taken equal to 20-30 degrees

What are the functions of protective relays

Description : What are the functions of protective relays

Last Answer : To detect the fault and initiate the operation of the circuit breaker to isolate the defective element from the rest of the system, thereby protecting the system from damages consequent to the fault.

The boundary of the protective zone is determined by the (A) Location of CT (B) sensitivity of relay used (C) Location of PT (D) None of these

Description : The boundary of the protective zone is determined by the (A) Location of CT (B) sensitivity of relay used (C) Location of PT (D) None of these

Last Answer : Ans: B The boundary of the protective zone is determined by the sensitivity of relay used. If the relay is more sensitive, the protective zone will be increased.

Which of the following parameters is not a primary parameter? a) Resistance b) Attenuation constant c) Capacitance d) Conductance

Description : Which of the following parameters is not a primary parameter? a) Resistance b) Attenuation constant c) Capacitance d) Conductance

Last Answer : Ans: B

Which plant parameters shown in the illustration would produce an alarm if they exceeded preset values? EL-0094 A. SME #7 CYL. EXH. and L.O. TO RDCN. GR. B. L.O. PRESS. TO MN. ENG. and PME #3 MN. BRG. C. L.O. PRESS. TO MN. ENG. and L.O. TO RDCN. GR. D. PME #3 MN. BRG. and SME #7 CYL. EXH.

Description : Which plant parameters shown in the illustration would produce an alarm if they exceeded preset values? EL-0094 A. SME #7 CYL. EXH. and L.O. TO RDCN. GR. B. L.O. PRESS. TO MN. ENG. and PME #3 MN. BRG. C. L.O. PRESS. TO MN. ENG. and L.O. TO RDCN. GR. D. PME #3 MN. BRG. and SME #7 CYL. EXH.

Last Answer : Answer: D

Which plant parameters shown in the illustration would produce an alarm if they fell below preset values? EL-0094 A. SME #7 CYL. EXH. and L.O. PRESS. TO RDCN. GR. B. L.O. PRESS TO MN. ENG. and PME #3 MN. BRG. C. L.O. PRESS. TO MN. ENG and L.O. PRESS. TO RDCN. GR. D. PME #3 MN. BRG. and SME #7 CYL. EXH.

Description : Which plant parameters shown in the illustration would produce an alarm if they fell below preset values? EL-0094 A. SME #7 CYL. EXH. and L.O. PRESS. TO RDCN. GR. B. L.O. PRESS TO MN. ENG. and PME #3 MN. BRG. C. ... . TO MN. ENG and L.O. PRESS. TO RDCN. GR. D. PME #3 MN. BRG. and SME #7 CYL. EXH.

Last Answer : Answer: C

What parameters or technical particulars are important to be considered while designing protection scheme of the transformer?

Description : What parameters or technical particulars are important to be considered while designing protection scheme of the transformer?

Last Answer : 1.Network Diagram showing the position of the transformer in the system 2.kVA or MVA rating of the transformer 3.Fault Level at the transformer 4.Voltage Ratio 5.Winding Connections 6.Per Unit ... Oil Filled 11.Length and area of cross section of the connecting leads between CTs and Relay Panel

To design the buck converter, what are basic & essential information (parameters) we need to get from the Customer?

Description : To design the buck converter, what are basic & essential information (parameters) we need to get from the Customer?

Last Answer : We need the following inputs from the customer,Output Voltage VOUTInput Voltage VINOutput Current (load current) IOUTMaximum Ripple voltage allowed at the output sideEfficiency of the converter

For Selecting MOSFET, what are the major parameters we have to consider in the datasheet?

Description : For Selecting MOSFET, what are the major parameters we have to consider in the datasheet?

Last Answer : In MOSFET datasheet, we have to focus on following parameters: Drain to Source Voltage VDSSOn state Drain to Source Resistance RDS(ON)Reverse Recovery Current IRRReverse Recovery Charge ... Charge QG Body Diode Characteristics ID at ambient temperature Channel power dissipation Channel temperature

What are the various parameters we have to consider, while selecting IGBT?

Description : What are the various parameters we have to consider, while selecting IGBT?

Last Answer : In IGBT datasheet, we have to focus on following parameters Collector to emitter voltage VCESCollector Current ICCollector Dissipation PCJunction Temperature Tj

Mention parameters monitored by turbovisory instruments.

Description : Mention parameters monitored by turbovisory instruments. 

Last Answer : a. Speed governing. b. Eccentricity monitoring. c. Vibration monitoring. d. Valve position monitoring. e. Temperature monitoring. f. Pressure monitoring. g. Level monitoring. h. Gas leak monitoring. i. Conductivity monitoring. j. Flow monitoring.

If sending end voltage is Vs at no-load in a transmission line then receiving end voltage is if ABCD parameters of line is given a) Vs b) Vs/A c) 0 d) Infinity

Description : If sending end voltage is Vs at no-load in a transmission line then receiving end voltage is if ABCD parameters of line is given a) Vs b) Vs/A c) 0 d) Infinity

Last Answer : Ans: Vs/A

Coast Guard Regulations (46 CFR) require manual contactors for operating the general emergency alarm on tank vessels to be located in the navigating bridge, engine room and the ____________. A. deck officers' quarters furthest from the engine room B. galley / dining room areas C. crew accommodations and sleeping spaces D. engineering officers' quarters furthest from the bridge

Description : Coast Guard Regulations (46 CFR) require manual contactors for operating the general emergency alarm on tank vessels to be located in the navigating bridge, engine room and the ____________. A ... C. crew accommodations and sleeping spaces D. engineering officers' quarters furthest from the bridge

Last Answer : Answer: A

As shown in the illustration, all 'MS' contacts are opened and closed by means of ________. EL-0073 A. operating coils B. magnets C. manual operation of the master switches D. solenoid switches

Description : As shown in the illustration, all 'MS' contacts are opened and closed by means of ________. EL-0073 A. operating coils B. magnets C. manual operation of the master switches D. solenoid switches

Last Answer : Answer: C

As shown in the illustration, which of the following conditions will occur as a result of a momentary loss of power? EL-0017 A. The motor will automatically restart when power is restored. B. 'H-4' will open, necessitating a manual restarting of the motor. C. '10L' and '20L' will open, necessitating a manual restarting of the motor. D. 'A-1' or 'A-2' will open, necessitating a manual restarting of the motor.

Description : As shown in the illustration, which of the following conditions will occur as a result of a momentary loss of power? EL-0017 A. The motor will automatically restart when power is restored. B. 'H-4' will open, ... the motor. D. 'A-1' or 'A-2' will open, necessitating a manual restarting of the motor.

Last Answer : Answer: B

In the event of a power failure during cargo loading operations, the movement of an electric powered cargo winch will be stopped by ____________. A. a manual override switch B. the weight of the load on the boom C. a spring set brake D. a hand operated band brake

Description : In the event of a power failure during cargo loading operations, the movement of an electric powered cargo winch will be stopped by ____________. A. a manual override switch B. the weight of the load on the boom C. a spring set brake D. a hand operated band brake

Last Answer : Answer: C

The device labeled 'REG SW' in the illustration is used to ___________. EL-0003 A. shift from the automatic voltage regulator to the manual voltage regulator B. shift the governor control from manual to automatic/zero droop C. enable the operator to read the field voltage on device 'REG ADJ' or device 'MAN ADJ' D. supply regulated control power to the switchboard

Description : The device labeled 'REG SW' in the illustration is used to ___________. EL-0003 A. shift from the automatic voltage regulator to the manual voltage regulator B. shift the governor control from manual to ... device 'REG ADJ' or device 'MAN ADJ' D. supply regulated control power to the switchboard

Last Answer : Answer: A

When securing an AC generator, you should FIRST ___________. A. open the generator circuit breaker B. switch the voltage regulator to 'manual' C. decrease the field excitation to minimum D. reduce the load on the unit

Description : When securing an AC generator, you should FIRST ___________. A. open the generator circuit breaker B. switch the voltage regulator to 'manual' C. decrease the field excitation to minimum D. reduce the load on the unit

Last Answer : Answer: D

Prior to starting an AC generator prime mover, the voltage regulator cutout switch should be placed in the __________. A. manual position B. bus neutral position C. raise voltage position D. transfer position

Description : Prior to starting an AC generator prime mover, the voltage regulator cutout switch should be placed in the __________. A. manual position B. bus neutral position C. raise voltage position D. transfer position

Last Answer : Answer: A

Low voltage releases as used in some shipboard motor starter and control equipment will have which of the following characteristics? A. They trip circuit contactors when the motor starts to overspeed. B. They require manual resetting upon restoration of normal voltage. C. They use a phase sensitive relay to trip contacts in series with the holding coil of the starter. D. They allow the motor to restart upon restoration of normal voltage.

Description : Low voltage releases as used in some shipboard motor starter and control equipment will have which of the following characteristics? A. They trip circuit contactors when the motor starts to overspeed. B. ... coil of the starter. D. They allow the motor to restart upon restoration of normal voltage.

Last Answer : Answer: D

An auto transformer is preferred over an ordinary two winding transformer due to: a) Safety of operation b) Availability of taps on secondary c) Copper savings d) All the above

Description : An auto transformer is preferred over an ordinary two winding transformer due to: a) Safety of operation b) Availability of taps on secondary c) Copper savings d) All the above

Last Answer : Ans: C

If Relay #5 changed contact position grounding the 'auto' input to the 'pitch controller module', pitch control would be effected by the _________________. EL-0095 A. pitch feedback potentiometer B. Engine room thrust split potentiometer C. Engine room thrust lever only D. Bridge thrust lever only

Description : If Relay #5 changed contact position grounding the 'auto' input to the 'pitch controller module', pitch control would be effected by the _________________. EL-0095 A. pitch feedback potentiometer B. Engine room thrust split potentiometer C. Engine room thrust lever only D. Bridge thrust lever only

Last Answer : Answer: B