What is the various design of CT's in switchyard?

What is the various design of CT's in switchyard?
by

1 Answer

Answer :

Bus coupler CT's- live tank design 2000-1000A/1A

All other CT's- dead tank design 800-600-400A/1A - lines and GT.

125A/1A – SUT
by

Related questions

Why Stones/Gravel is used in electrical Switchyard

Description : Why Stones/Gravel is used in electrical Switchyard

Last Answer : Stones/Gravel is used in Electrical Switch yard because of following reasons Reasons for using Stones/Gravel in Switch yard: 1. During Short circuit current Step and Touch potential increases. ... switch yard 4. Improves yard working condition 5. Provides protection from wild life and snakes.

What is the rating of switchyard battery charger and batteries?

Description : What is the rating of switchyard battery charger and batteries? 

Last Answer : Switchyard is having Float cum boost charger of 282 V DC maximum and 100 Amps rated charger of six-pulse full wave thyristerised controlled rectifier. Batteries are tubular 220 V DC. +ve plate is made ... minutes. Specific gravity 1110 5 and specific gravity after 10 hrs discharge is 1150 5. 

Why switchyard is located indoors of coastal plants?

Description : Why switchyard is located indoors of coastal plants?

Last Answer : Saline atmosphere will deposit on the insulators causing its flashover. The building kept under positive pressure compared with outside thus preventing the (saline) air entering from outside to inside the building. 

For a fault in switchyard lightning arrestor, what protection will act?

Description : For a fault in switchyard lightning arrestor, what protection will act?

Last Answer : Bus bar differential protection.  

Give the details of switchyard 220 kV CB, Isolator, CT, CVT and lightning arrestor.

Description : Give the details of switchyard 220 kV CB, Isolator, CT, CVT and lightning arrestor.  

Last Answer : 220 kV SF6 Circuit Breaker 1. Make - ABB 2. Air pressure blocking a. Close Block - 17.3 bar. b. Open block - 16.7 bar. c. Auto reclose block - 19 bar. 3. SF6 pressure block a. Alarm - 5. ... , storage and erection. Rated voltage : 216 kV rms. Operating voltage : 184 kV rms. 

Give switchyard specification.

Description : Give switchyard specification. 

Last Answer : 1. Type : Out door. 2. Scheme : Double main bus bar with bypass switching scheme is provided. This allows maintenance of one bus or one CB without interruption. 3. Normal voltage : 220 kV. 4. Rated ... 11. CB - SF6 12. Isolator - motor operated rotating type. 13. Number of bays - 16 Nos. 

In 220 kV switchyard why lightning arrestor should be properly grounded?

Description : In 220 kV switchyard why lightning arrestor should be properly grounded?

Last Answer : a. During lightning, surges should be discharged to ground, otherwise it will puncture the equipment insulation and it is possible only when lightning arrestor is grounded properly.  b. In order to make it effective ... kV. Soil resistivity a should be minimum and may be it is 3.5 ohm per meter.  

Why indoor switchyard is provided in MAPS?

Description : Why indoor switchyard is provided in MAPS?  

Last Answer : The salt contamination in the switchyard is avoided by providing indoor switchyard in MAPS. Because the plant is just 300 metres away from the seashore and the atmosphere is saline. This salt will get ... and to have low cost of installation and spare parts of aluminium indoor switchyard is used. 

What is advantage of cast resin CT’s?

Description : What is advantage of cast resin CT’s? 

Last Answer : Can withstand bursting forces under short ckt, protect damages against external causes impervious to moisture.  

Why core balance CT is preferred over residual connected CT’s to sense earth fault in 6.6 kV feeders?

Description : Why core balance CT is preferred over residual connected CT’s to sense earth fault in 6.6 kV feeders?

Last Answer : a) To avoid relay mal-operation due to CT saturation b) Better sensitivity is got. c) High pickup and TMS avoided in IDMT earth fault relay. 

Where core balance CT’s are used?

Description : Where core balance CT’s are used? 

Last Answer : In earth fault protection used. It senses the zero sequence current.  

Why delta – delta CT’s are used for star – star transformer differential protection?

Description : Why delta – delta CT’s are used for star – star transformer differential protection?

Last Answer : Say primary neutral is not solidly earthed. Then for any earthfault on secondary terminal, the primary current distribution is so for external fault, the differential is likely to operate if sequence current ... into relay. The 2:1:1 distribution is possibly only for core type or delta tertiary.

What is the advantage of housing CT’s with in bushings?

Description : What is the advantage of housing CT’s with in bushings? 

Last Answer : Bushing acts as a primary insulator for the CT.  

Mention the initial commissioning checks on CT’s, PT’s and relays.

Description : Mention the initial commissioning checks on CT’s, PT’s and relays.

Last Answer : Commissioning checks on CT a) Terminal marking correctness. b) Polarity of terminals. c) Insulation resistance between primary and secondary. d) Insulation resistance between primary to earth and secondary ... h) Burden check of relay. i) Primary injection test. j) Secondary injection test. 

How many xrays and CTs have you had?

Description : How many xrays and CTs have you had?

Last Answer : 10 or 12 CT scans neck to lower pelvis Chest X-rays 20 or 30 (ex smoker) 6 panoramic dental X-rays 4 head X-rays for car accident (different perspectives) broke the windshield with head 30 sets ... Two each of shoulders Fluoroscope for fitting of shoes 6 or 8. I should probably glow in the dark

What is CTS / TRS cable ?

Description : What is CTS / TRS cable ?

Last Answer : The full name of CTS is Cab Tire Sheathed and the full name of TRS is Tough Rubber Sheathed . Tin coated copper or aluminum wire is covered with VIR insulation with a protective, impervious and ... is called hard rubber = 'Tough rubber sheathed'. This cable is usually made using 250/400 voltage.

What is the full form of CTS ?

Last Answer : Full version of CTS Computerized Tomography Scanner

What is Carpal Tunnel syndrome (CTS)?

Description : What is Carpal Tunnel syndrome (CTS)?

Last Answer : Muscles and bones in the extremities are enclosed within a fascia. When some injury occurs let us say a crush injury in the forearm this leads to Edema/swellings. Further leading in an increase in ... s maneuver is performed by flexing the wrist gently as far as possible, then holding this position

What is CTS ?

Description : What is CTS ?

Last Answer : The common type system is a rich type system, built into the common language runtime, that supports the types and operations found in most programming languages. The common type system supports the complete implementation of a wide range of programming languages.

Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard synchronous communication protocol. c. RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Description : Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard ... indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Last Answer : RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data

Which of the following signal is not standard RS-232-C signal? a. VDR b. RTS c. CTS d. DSR

Description : Which of the following signal is not standard RS-232-C signal? a. VDR b. RTS c. CTS d. DSR

Last Answer : VDR

The RTS and CTS frames in CSMA/CA ____ solvethe hidden stationproblem. The RTS and CTS frames in CSMA/CA ____ solve the exposed station problem. A) can; cannot B) cannot; can C) can; can D) cannot; cannot

Description : The RTS and CTS frames in CSMA/CA ____ solvethe hidden stationproblem. The RTS and CTS frames in CSMA/CA ____ solve the exposed station problem. A) can; cannot B) cannot; can C) can; can D) cannot; cannot

Last Answer : can; cannot

Why are synchro capacitors placed physically close to differentials transmitters and CTs?

Description : Why are synchro capacitors placed physically close to differentials transmitters and CTs?

Last Answer : To keep the connections as short as possible in order to maintain system.

Which among these is a type of internal wiring? A. Cleat wiring B. Conduit wiring C. CTS wiring

Description : Which among these is a type of internal wiring? A. Cleat wiring B. Conduit wiring C. CTS wiring 

Last Answer : Which among these is a type of internal wiring? A. Cleat wiring B. Conduit wiring C. CTS wiring  A, B and C

To protect the power transformer (Y-Y with neutral grounded) against fault, what type of connection do the CTs have ?

Description : To protect the power transformer (Y-Y with neutral grounded) against fault, what type of connection do the CTs have ?

Last Answer : To protect the power transformer (Y-Y with neutral grounded) against fault, what type of connection do the CTs have ? Δ-Δ connection

If the production is done according to change in various product design easily then suchmanufacturing system is called as flexible system. a.TRUE b.FALSE c.D d.

Description : If the production is done according to change in various product design easily then suchmanufacturing system is called as flexible system. a.TRUE b.FALSE c.D d.

Last Answer : b.FALSE

Which design approaches help in building sites that are optimized for various screen sizes? a)Mobile optimized design b)Responsive web design c)Progressive enhancement d)Adaptive web design Answer: b

Description : Which design approaches help in building sites that are optimized for various screen sizes? a)Mobile optimized design b)Responsive web design c)Progressive enhancement d)Adaptive web design Answer: b

Last Answer : Responsive web design

Pick up the correct statement from the following: (A) Various geometric design features and generally guided by ruling design speed (B) The design speed for a given highway should preferably be uniform (C) Abrupt change in the design speed should not be permitted (D) All the above

Description : Pick up the correct statement from the following: (A) Various geometric design features and generally guided by ruling design speed (B) The design speed for a given highway should preferably be uniform (C) Abrupt change in the design speed should not be permitted (D) All the above

Last Answer : Answer: Option D

The minimum design speed of various types of highways in plain terrain is the same as the ruling design speed of (A) Rolling terrain (B) Mountainous terrain (C) Steep terrain (D) None of these

Description : The minimum design speed of various types of highways in plain terrain is the same as the ruling design speed of (A) Rolling terrain (B) Mountainous terrain (C) Steep terrain (D) None of these

Last Answer : Answer: Option A

What Are The Various Phases Of Design Process?

Description : What Are The Various Phases Of Design Process?

Last Answer : The various phases of design process are: 1. Recognition of need. 2. Definition of problem 3. Synthesis 4. Analysis and optimization 5. Evaluation 6. Presentation

State True or False. i) Master Development Plan basically is a schedule of various applications to be comprised. ii) It consists of start and finish dates of a system analysis, design implementation and maintenance activities. A) i-True, ii-True B) i-False, ii-True C) i-True, ii-False D) i-False, ii-False

Description : State True or False. i) Master Development Plan basically is a schedule of various applications to be comprised. ii) It consists of start and finish dates of a system analysis, design implementation and maintenance activities. ... B) i-False, ii-True C) i-True, ii-False D) i-False, ii-False

Last Answer : A) i-True, ii-True

Discuss the various strategies of design. Which design strategy is most popular and practical?

Description : Discuss the various strategies of design. Which design strategy is most popular and practical?

Last Answer : Ans The most commonly used software design strategy involved decomposing the design into functional components with system state information held in a shared data area. The design strategies are: ... oriented design, the system state is decentralized and each object manages is own state information

List down various types of clamping devices used in design of Jigs. Explain any one with sketch.

Description : List down various types of clamping devices used in design of Jigs. Explain any one with sketch.

Last Answer : List of Types of clamping devices used in design of jigs. i. Screw clamp ii. Pivoted clamp. iii. Equalizing clamp. iv. Latch clamp. v. Wedge clamp. vi. Hinged jaw clamp. ... to be gripped on its edges as shown in figure. This arrangement ensures easy machining of the work piece 

Explain the various feature of Linux that are useful for embedded system design.

Last Answer : Various features of Linux that are used in embedded systems are as follows : Linux is multiuser operating system. Linux is open source and free. Linux can be ... Linux supports handling of errors. Real-time Linux supports the group scheduling functions.

What Are The Various Types Of Rotors Used In The Alternators?

Description : What Are The Various Types Of Rotors Used In The Alternators?

Last Answer : Salient pole rotor Non- salient pole rotor and Cylindrical rotor

What are the various types of tariff?

Description : What are the various types of tariff?

Last Answer : 1. Simple tariff 2. Flat rate tariff 3. Block rate tariff 4. Two-part tariff 5. Maximum demand tariff 6. Power factor tariff 7. Three-part tariff

What are the various parameters we have to consider, while selecting IGBT?

Description : What are the various parameters we have to consider, while selecting IGBT?

Last Answer : In IGBT datasheet, we have to focus on following parameters Collector to emitter voltage VCESCollector Current ICCollector Dissipation PCJunction Temperature Tj

Name the various methods for predetermining the voltage regulation of 3-phase Alternator.

Description : Name the various methods for predetermining the voltage regulation of 3-phase Alternator.

Last Answer : The following are the three methods which are used to predetermine the voltage regulation of smooth cylindrical type Alternators · Synchronous impedance / EMF method · Ampere-turn / MMF method · Potier / ZPF method

Explain armature reaction of an alternator and its effect on main flux at various power factor.

Description : Explain armature reaction of an alternator and its effect on main flux at various power factor.

Last Answer : 1. zero lagging pf: armature flux lags main flux by 180 . Hence effect is demagnetizing i.e the main flux is reduced 2. lagging pf: it has 2 components demagnetizing and cross magnetizing ... 5. zero leading pf: Armature flux is in phase with main flux. Effect is completely magnetizing.

What are the various types of three phase transformer connections?

Description : What are the various types of three phase transformer connections?

Last Answer : The most common types of transformer connections are, i. Star-Star (Y-Y) ii. Delta-Delta(∆-∆) iii. Star-Delta (Y-∆) iv. Delta-Star (∆-Y) v. Open Delta (V-V) vi. Scott Connection (T-T)

What are the various types of Transformers?

Description : What are the various types of Transformers?

Last Answer : Based on supply 1.Single phase transformer 2.Three phase transformer Based on winding 1.Auto transformer (single winding) 2.Two winding transformer 3. Three winding transformer 4. Six ... transformer Based on function 1. Step up transformer 2.Step down transformer 3.Isolation transformer

List the various types of diesel plants.

Description : List the various types of diesel plants.

Last Answer : Based on number of strokes: (a) Two stroke diesel engine (b) Four srtoke diesel engine Based on orientation: (a) Horizontal diesel engine (b) Vertical diesel engine Based on number of ... (a) single cylinder (b) Multi cylinder And other type like naturally aspirated, superheated etc.,

State the various types of unsymmetrical faults.

Description : State the various types of unsymmetrical faults.

Last Answer : Line to ground ,line to line and double line to ground faults

State the various types of earthing.

Description : State the various types of earthing.

Last Answer : Solid earthing, resistance earthing , reactance earthing , voltage transformer earthing and zig-zag transformer earthing.

Mention the various tests carried out in a circuit breaker at HV labs.

Description : Mention the various tests carried out in a circuit breaker at HV labs.

Last Answer : Short circuit tests, Synthetic tests& direct tests.

What are the various faults that would affect an alternator?

Description : What are the various faults that would affect an alternator?

Last Answer : (a) Stator faults 1, Phase to phase faults 2, Phase to earth faults 3, Inter turn faults (b) 1, Earth faults 2, Fault between turns 3, Loss of excitation due to fuel failure (c) 1, Over ... rise, resulting in shattering of the turbine low pressure casing (d) 1, Fault on lines 2, Fault on busbars

What are the various faults to which a turbo alternator is likely to be subjected?

Description : What are the various faults to which a turbo alternator is likely to be subjected?

Last Answer : Failure of steam supply; failure of speed; overcurrent; over voltage; unbalanced loading; stator winding fault .

List the various types of series and shunt fault?

Description : List the various types of series and shunt fault?

Last Answer : Shunt faults are, Line to ground fault line to line fault, double line to ground fault, three phase fault. Series faults are, One open conductor fault Two open conductor fault

What are the various tests on transformers?

Description : What are the various tests on transformers? 

Last Answer : a) Tan delta and capacitance dissipation factor b) Tests on cooling fans c) Tests on OLTC d) Vector group test e) Short circuit test f) Open circuit test g) Insulation resistance test h) Turns ratio test i) Winding resistance test.