Which of the following signal is not standard RS-232-C signal? a. VDR b. RTS c. CTS d. DSR

Which of the following signal is not standard RS-232-C signal?
a. VDR
b. RTS
c. CTS
d. DSR
by

1 Answer

Answer :

VDR
by

Related questions

Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard synchronous communication protocol. c. RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Description : Which of the following statement is incorrect? a. Multiplexers are designed to accept data from several I/O devices and transmit a unified stream of data on one communication line b. HDLC is a standard ... indicates that it is ready to accept data d. RTS/CTS is the way the terminal indicates ringing

Last Answer : RTS/CTS is the way the DTE indicates that it is ready to transmit data and the way the DCW indicates that it is ready to accept data

The RTS and CTS frames in CSMA/CA ____ solvethe hidden stationproblem. The RTS and CTS frames in CSMA/CA ____ solve the exposed station problem. A) can; cannot B) cannot; can C) can; can D) cannot; cannot

Description : The RTS and CTS frames in CSMA/CA ____ solvethe hidden stationproblem. The RTS and CTS frames in CSMA/CA ____ solve the exposed station problem. A) can; cannot B) cannot; can C) can; can D) cannot; cannot

Last Answer : can; cannot

Data aresent over pin _____ of the EIA-232 interface. A. 2 B. 3 C. 4 D. All of theabove

Description : Data aresent over pin _____ of the EIA-232 interface. A. 2 B. 3 C. 4 D. All of theabove

Last Answer : 2

RS-232, RS-449, RS-530, V, 24 and X.21 are examples of ____________. A. standards for interfaces between modems and transmission facilities B. standards for various types of transmission channels C. standards for interfaces between terminals and modems D. standards for end to end performance of data communications system

Description : RS-232, RS-449, RS-530, V, 24 and X.21 are examples of ____________. A. standards for interfaces between modems and transmission facilities B. standards for various types of ... for interfaces between terminals and modems D. standards for end to end performance of data communications system

Last Answer : C. standards for interfaces between terminals and modems

___________ is a device in data transmission to interface data terminal equipment to an analogue transmission line. A. RS 232 B. Connector C. Modem D. RJ-11 plug

Description : ___________ is a device in data transmission to interface data terminal equipment to an analogue transmission line. A. RS 232 B. Connector C. Modem D. RJ-11 plug

Last Answer : C. Modem

In which of the following terminals the screen is regarded as an array of pixels, where each pixel is either on or off: a) Character Map Terminal b) Bit Map Terminal c) RS 232 C Terminal d) None of The Above

Description : In which of the following terminals the screen is regarded as an array of pixels, where each pixel is either on or off: a) Character Map Terminal b) Bit Map Terminal c) RS 232 C Terminal d) None of The Above

Last Answer : b) Bit Map Terminal

The RS – 232 interface

Description : The RS – 232 interface

Last Answer : interconnects data sets and the transmission circuits

Describe function of each pin of 9 pin RS 232 connector.

Description : Describe function of each pin of 9 pin RS 232 connector.

Last Answer : An RS232 pinout 9 pin cable features nine pins: 1. Data Carrier Detect (DCD or CD) - After a data terminal is detected, a signal is sent to the data set that is going to be transmitted ... occurs, the data terminal is alerted, but the RI will not stop the flow of serial data between devices.

Sony DSR-PD150 CCD Problems?

Description : Sony DSR-PD150 CCD Problems?

Last Answer : did you white balance the camera?

Where can I get a Service Manual for a Sony DSR-PD150?

Description : Where can I get a Service Manual for a Sony DSR-PD150?

Last Answer : in the internets

When were DSR cameras first developed?

Description : When were DSR cameras first developed?

Last Answer : DSR cameras were first developed in the early 2000s. I have one, which is a pink Kodak easy share. It is not of very good quality, so if looking for a particular model, DO NOT get a Kodak.

What is the full form of RTS ?

Last Answer : RTS - Real Time Streaming

What is the full form of RTS ?

Last Answer : RTS full time Real time Rtreaming

What is the full form of RTS ?

Last Answer : Real Time Streaming

The minimum TSS content in RTS beverage is — % a. 10 b. 20 c. 30 d. 40

Description : The minimum TSS content in RTS beverage is — % a. 10 b. 20 c. 30 d. 40

Last Answer : a. 10

Marketing effo ing efforts, wh rts, which incl ich include publi ude public health ca c health campaigns to reduc ns to reduce smoki e smoking, alcoh ng, alcoholism, drug abuse, and overeating are called _____. a. specialty product b. social marketing social marketing c. shopping product

Description : Marketing effo ing efforts, wh rts, which incl ich include publi ude public health ca c health campaigns to reduc ns to reduce smoki e smoking, alcoh ng, alcoholism, drug abuse, and overeating are called _____. a. specialty product b. social marketing social marketing c. shopping product

Last Answer : b. social marketing social marketing

How many xrays and CTs have you had?

Description : How many xrays and CTs have you had?

Last Answer : 10 or 12 CT scans neck to lower pelvis Chest X-rays 20 or 30 (ex smoker) 6 panoramic dental X-rays 4 head X-rays for car accident (different perspectives) broke the windshield with head 30 sets ... Two each of shoulders Fluoroscope for fitting of shoes 6 or 8. I should probably glow in the dark

What is CTS / TRS cable ?

Description : What is CTS / TRS cable ?

Last Answer : The full name of CTS is Cab Tire Sheathed and the full name of TRS is Tough Rubber Sheathed . Tin coated copper or aluminum wire is covered with VIR insulation with a protective, impervious and ... is called hard rubber = 'Tough rubber sheathed'. This cable is usually made using 250/400 voltage.

What is the full form of CTS ?

Last Answer : Full version of CTS Computerized Tomography Scanner

What is Carpal Tunnel syndrome (CTS)?

Description : What is Carpal Tunnel syndrome (CTS)?

Last Answer : Muscles and bones in the extremities are enclosed within a fascia. When some injury occurs let us say a crush injury in the forearm this leads to Edema/swellings. Further leading in an increase in ... s maneuver is performed by flexing the wrist gently as far as possible, then holding this position

What is CTS ?

Description : What is CTS ?

Last Answer : The common type system is a rich type system, built into the common language runtime, that supports the types and operations found in most programming languages. The common type system supports the complete implementation of a wide range of programming languages.

What is advantage of cast resin CT’s?

Description : What is advantage of cast resin CT’s? 

Last Answer : Can withstand bursting forces under short ckt, protect damages against external causes impervious to moisture.  

What is the various design of CT's in switchyard?

Description : What is the various design of CT's in switchyard?

Last Answer : Bus coupler CT's- live tank design 2000-1000A/1A All other CT's- dead tank design 800-600-400A/1A - lines and GT. 125A/1A – SUT

Why core balance CT is preferred over residual connected CT’s to sense earth fault in 6.6 kV feeders?

Description : Why core balance CT is preferred over residual connected CT’s to sense earth fault in 6.6 kV feeders?

Last Answer : a) To avoid relay mal-operation due to CT saturation b) Better sensitivity is got. c) High pickup and TMS avoided in IDMT earth fault relay. 

Where core balance CT’s are used?

Description : Where core balance CT’s are used? 

Last Answer : In earth fault protection used. It senses the zero sequence current.  

Why delta – delta CT’s are used for star – star transformer differential protection?

Description : Why delta – delta CT’s are used for star – star transformer differential protection?

Last Answer : Say primary neutral is not solidly earthed. Then for any earthfault on secondary terminal, the primary current distribution is so for external fault, the differential is likely to operate if sequence current ... into relay. The 2:1:1 distribution is possibly only for core type or delta tertiary.

What is the advantage of housing CT’s with in bushings?

Description : What is the advantage of housing CT’s with in bushings? 

Last Answer : Bushing acts as a primary insulator for the CT.  

Mention the initial commissioning checks on CT’s, PT’s and relays.

Description : Mention the initial commissioning checks on CT’s, PT’s and relays.

Last Answer : Commissioning checks on CT a) Terminal marking correctness. b) Polarity of terminals. c) Insulation resistance between primary and secondary. d) Insulation resistance between primary to earth and secondary ... h) Burden check of relay. i) Primary injection test. j) Secondary injection test. 

Why are synchro capacitors placed physically close to differentials transmitters and CTs?

Description : Why are synchro capacitors placed physically close to differentials transmitters and CTs?

Last Answer : To keep the connections as short as possible in order to maintain system.

Which among these is a type of internal wiring? A. Cleat wiring B. Conduit wiring C. CTS wiring

Description : Which among these is a type of internal wiring? A. Cleat wiring B. Conduit wiring C. CTS wiring 

Last Answer : Which among these is a type of internal wiring? A. Cleat wiring B. Conduit wiring C. CTS wiring  A, B and C

To protect the power transformer (Y-Y with neutral grounded) against fault, what type of connection do the CTs have ?

Description : To protect the power transformer (Y-Y with neutral grounded) against fault, what type of connection do the CTs have ?

Last Answer : To protect the power transformer (Y-Y with neutral grounded) against fault, what type of connection do the CTs have ? Δ-Δ connection

The loss in signal power as light travels down the fiber is called a. attenuation b. progragation c. scattering d. interruption

Description : The loss in signal power as light travels down the fiber is called a. attenuation b. progragation c. scattering d. interruption

Last Answer : attenuation

In a synchronous modem, the digital-to-analog converter transmits signal to the a. equilizer b. modulator c. demodulator d. terminal e. none of aobve

Description : In a synchronous modem, the digital-to-analog converter transmits signal to the a. equilizer b. modulator c. demodulator d. terminal e. none of aobve

Last Answer : equilizer

The transmission signal coding method of TI carrier is called a. Bipolar b. NRZ c. Manchester d. Binary

Description : The transmission signal coding method of TI carrier is called a. Bipolar b. NRZ c. Manchester d. Binary

Last Answer : Bipolar

A ________receivesa signal and,before it becomes too weak or corrupted, regenerates the original bit pattern. It thensends the refreshed signal. A) passive hub B) repeater C) bridge D) router

Description : A ________receivesa signal and,before it becomes too weak or corrupted, regenerates the original bit pattern. It thensends the refreshed signal. A) passive hub B) repeater C) bridge D) router

Last Answer : repeater

A _______regenerates a signal, connects segments of a LAN,and hasno filtering capability. A) repeater B) bridge C) routerD)none of the above

Description : A _______regenerates a signal, connects segments of a LAN,and hasno filtering capability. A) repeater B) bridge C) router D) none of the above

Last Answer : repeater

The term modem is a composite word that refers to the two functional entities that make up the device: asignal _______ and a signal _______. A) modulator; demodulator B) demodulator; modulator C) modern;demo D) none of the above

Description : The term modem is a composite word that refers to the two functional entities that make up the device: asignal _______ and a signal _______. A) modulator; demodulator B) demodulator; modulator C) modern;demo D) none of the above

Last Answer : modulator; demodulator

In a fiber-optic cable, the signal is propagatedalong theinner core by _______. A) reflection B) refraction C) modulation D) none of the above

Description : In a fiber-optic cable, the signal is propagatedalong theinner core by _______. A) reflection B) refraction C) modulation D) none of the above

Last Answer : reflection

The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM

Description : The ______ technique expands the bandwidthof a signal by replacing each data bit with n bits. A) FDM B) DSSS C) FHSS D) TDM

Last Answer : DSSS

The _______ technique uses M different carrier frequencies that are modulated by the source signal. At one moment, the sign modulates one carrier frequency; at the next moment, thesignal modulates another carrier frequency. A) FDM B) DSSSC)FHSSD)TDM

Description : The _______ technique uses M different carrier frequencies that are modulated by the source signal. At one moment, the sign modulates one carrier frequency; at the next moment, thesignal modulates another carrier frequency. A) FDM B) DSSS C) FHSS D) TDM

Last Answer : FHSS

In synchronous TDM, forn signal sources of the same data rate, eachframe contains _______ slots. A) n B) n + 1 C) n- 1 D) 0to n

Description : In synchronous TDM, forn signal sources of the same data rate, eachframe contains _______ slots. A) n B) n + 1 C) n- 1 D) 0to n

Last Answer : n

Which multiplexing technique shifts each signal to a different carrier frequency? A) FDM B) TDM C) Both (a)and (b) D) None of the above

Description : Which multiplexing technique shifts each signal to a different carrier frequency? A) FDM B) TDM C) Both (a)and (b) D) None of the above

Last Answer : FDM

In_______, the peakamplitude of one signal level is 0; the other is thesame as the amplitude of the carrier frequency. A) PSK B) OOK C) FSK D) none of the above

Description : In_______, the peakamplitude of one signal level is 0; the other is thesame as the amplitude of the carrier frequency. A) PSK B) OOK C) FSK D) none of the above

Last Answer : OOK

In_____ transmission, thephaseof the carrier signal is modulated to follow the changingvoltage level (amplitude) of the modulating signal. A) AM B) PM C) FM D) none of the above

Description : In_____ transmission, thephaseof the carrier signal is modulated to follow the changingvoltage level (amplitude) of the modulating signal. A) AM B) PM C) FM D) none of the above

Last Answer : PM

In_____ transmission, the frequency of the carrier signal is modulated to follow the changing voltage level (amplitude)of the modulating signal. The peak amplitude and phase of the carrier signal remainconstant,but as the amplitudeof the information signal changes, thefrequency of thecarrier changes correspondingly. A) AM B) PM C) FM D) none of the above

Description : In_____ transmission, the frequency of the carrier signal is modulated to follow the changing voltage level (amplitude)of the modulating signal. The peak amplitude and phase of the carrier signal remainconstant,but as ... of thecarrier changes correspondingly. A) AM B) PM C) FM D) none of the above

Last Answer : FM

In_____ transmission, thecarrier signal is modulated so that its amplitude varies with the changing amplitudes of the modulating signal. A) AM B) PM C) FM D) none of the above

Description : In_____ transmission, thecarrier signal is modulated so that its amplitude varies with the changing amplitudes of the modulating signal. A) AM B) PM C) FM D) none of the above

Last Answer : AM

________conversion is therepresentation ofanalog information by an analog signal. A) Digital-to-analog B) Analog-to-analog C) Analog-to-digital D) Digital-to-digita

Description : ________conversion is therepresentation ofanalog information by an analog signal. A) Digital-to-analog B) Analog-to-analog C) Analog-to-digital D) Digital-to-digita

Last Answer : Analog-to-analog

A constellation diagram shows us the __________ of a signal element, particularly when we areusing twocarriers (one in-phase and one quadrature). A) amplitudeand phase B) amplitudeand frequency C) frequencyand phase D) none of the above

Description : A constellation diagram shows us the __________ of a signal element, particularly when we areusing twocarriers (one in-phase and one quadrature). A) amplitudeand phase B) amplitudeand frequency C) frequencyand phase D) none of the above

Last Answer : amplitudeand phase

In________, the phase of thecarrier is varied to represent two or more different signal elements. Both peak amplitude and frequency remain constant. A) ASKB)PSKC)FSKD)QAM

Description : In________, the phase of thecarrier is varied to represent two or more different signal elements. Both peak amplitude and frequency remain constant. A) ASK B) PSK C) FSK D) QAM

Last Answer : PSK

In_________, the frequencyof the carrier signal is varied to representdata. Both peak amplitudeand phase remain constant. A) ASK B) PSK C) FSK D) QAM

Description : In_________, the frequencyof the carrier signal is varied to representdata. Both peak amplitudeand phase remain constant. A) ASK B) PSK C) FSK D) QAM

Last Answer : FSK