Which of the following factors affect the mechanical properties of a material under applied loads? a) Content of alloys b) Grain size c) Imperfection and defects d) Shape of material

Which of the following factors affect the mechanical properties of a material under applied loads?

a) Content of alloys

b) Grain size

c) Imperfection and defects

d) Shape of material
by

1 Answer

Answer :

d) Shape of material
by

Related questions

Stress concentration is caused due to A. Variation in properties of material from point to point in a member B. Pitting at points or areas at which loads on a member are applied C. Abrupt change of section D. All of the above

Description : Stress concentration is caused due to A. Variation in properties of material from point to point in a member B. Pitting at points or areas at which loads on a member are applied C. Abrupt change of section D. All of the above

Last Answer : D. All of the above

Which of the following isn’t the property of taper roller? a) High rigidity b) Easy dismantling c) Take low radial and heavy loads d) All are the properties of tapper roller

Description : Which of the following isn’t the property of taper roller? a) High rigidity b) Easy dismantling c) Take low radial and heavy loads d) All are the properties of tapper roller

Last Answer : c) Take low radial and heavy loads

Which of the following properties of a solid is not dependent on crystal imperfection? (A) Ductility (B) Semi-conductivity (C) Melting point (D) Yield stress

Description : Which of the following properties of a solid is not dependent on crystal imperfection? (A) Ductility (B) Semi-conductivity (C) Melting point (D) Yield stress

Last Answer : (C) Melting point

Stoke's law states that the velocity at which a grain settles out of suspension, the other factors remaining constant, is dependent upon (A) Shape of grain (B) Weight of grain (C) Size of grain (D) Shape, size and weight of grain

Description : Stoke's law states that the velocity at which a grain settles out of suspension, the other factors remaining constant, is dependent upon (A) Shape of grain (B) Weight of grain (C) Size of grain (D) Shape, size and weight of grain

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The object of classifying soils is to arrange them into groups according to their properties and behaviour (B) A soil classification system is meant to provide an accepted and systematic method of describing the various types of soils eliminating personal factors (C) The first category of soil classification is based on grain size of the soil (D) All the above

Description : Pick up the correct statement from the following: (A) The object of classifying soils is to arrange them into groups according to their properties and behaviour (B) A soil classification system is ... first category of soil classification is based on grain size of the soil (D) All the above

Last Answer : Answer: Option D

__________ is one where mechanical forces or restricting forms are applied on a material so asto form it into the desired shape a.Subtractive process b.Additive process c.Formative process d.All of above

Description : __________ is one where mechanical forces or restricting forms are applied on a material so asto form it into the desired shape a.Subtractive process b.Additive process c.Formative process d.All of above

Last Answer : c.Formative process

The resultant axial force on bolt depends upon (A) Initial tension (B) External applied load (C) Stiffness of bolt and parts held by bolt (D) All three factors

Description : The resultant axial force on bolt depends upon (A) Initial tension (B) External applied load (C) Stiffness of bolt and parts held by bolt (D) All three factors

Last Answer : (D) All three factors

Internal defects in a welded joint can be found by a process called (i) Tension test (ii) Visual inspection (iii) Radio graphing (iv) None

Description : Internal defects in a welded joint can be found by a process called (i) Tension test (ii) Visual inspection (iii) Radio graphing (iv) None

Last Answer : (iii) Radio graphing

Normalising of a casting does not (A) Induce stresses in it (B) Refine its grain structure (C) Reduce segregation (D) Improve its mechanical properties

Description : Normalising of a casting does not (A) Induce stresses in it (B) Refine its grain structure (C) Reduce segregation (D) Improve its mechanical properties

Last Answer : (A) Induce stresses in it

Normalising of an object does not (A) Refine coarse grain structure obtained during hot working (B) Improve ductility (C) Improve yield strength (D) Improve mechanical properties

Description : Normalising of an object does not (A) Refine coarse grain structure obtained during hot working (B) Improve ductility (C) Improve yield strength (D) Improve mechanical properties

Last Answer : (B) Improve ductility

The property of the bearing material to yield and adopt its shape to that of journal is called (A) Embeddability (B) Conformability (C) Viscosity (D) Endurance limit stress

Description : The property of the bearing material to yield and adopt its shape to that of journal is called (A) Embeddability (B) Conformability (C) Viscosity (D) Endurance limit stress

Last Answer : (B) Conformability

________is suitable as a lubricant for low and moderate loads applications of rolling contact bearing. (a) Grease (b) Lubricating oil (c) Graphite (d) Air

Description : ________is suitable as a lubricant for low and moderate loads applications of rolling contact bearing. (a) Grease (b) Lubricating oil (c) Graphite (d) Air

Last Answer : (a) Grease

Which of the following isn’t the property of a taper roller bearing? (a) High rigidity (b) Easy dismantling (c) Take low radial and heavy loads (d) It is unsuitable for high speed applications

Description : Which of the following isn’t the property of a taper roller bearing? (a) High rigidity (b) Easy dismantling (c) Take low radial and heavy loads (d) It is unsuitable for high speed applications

Last Answer : (c) Take low radial and heavy loads

Tapered roller bearings can take (a) radial load only (b) axial load only (c) both radial and axial loads and the ratio of these being greater than unity (d) both radial and axial loads and the ratio of these being less than unity

Description : Tapered roller bearings can take (a) radial load only (b) axial load only (c) both radial and axial loads and the ratio of these being greater than unity (d) both radial and axial loads and the ratio of these being less than unity

Last Answer : (c) both radial and axial loads and the ratio of these being greater than unity

Angular contact bearing can take thrust as well as radial loads. (a) True (b) False

Description : Angular contact bearing can take thrust as well as radial loads. (a) True (b) False

Last Answer : (a) True

Deep groove ball bearings are used for (a) heavy thrust load only (b) the small angular displacement of shafts (c) radial load at high speed (d) combined thrust and radial loads at high speed

Description : Deep groove ball bearings are used for (a) heavy thrust load only (b) the small angular displacement of shafts (c) radial load at high speed (d) combined thrust and radial loads at high speed

Last Answer : (d) combined thrust and radial loads at high speed

The tapered roller bearings can take (a) radial load only (b) axial load only (c) both radial and axial loads (d) none of the mentioned

Description : The tapered roller bearings can take (a) radial load only (b) axial load only (c) both radial and axial loads (d) none of the mentioned

Last Answer : (c) both radial and axial loads

The antifriction bearings (a) have low starting and low running friction at moderate speeds (b) have a high initial cost (c) can carry both radial and thrust loads (d) all the mentioned

Description : The antifriction bearings (a) have low starting and low running friction at moderate speeds (b) have a high initial cost (c) can carry both radial and thrust loads (d) all the mentioned

Last Answer : (d) all the mentioned

The most suitable bearing for carrying very heavy loads with slow speed is (a) Hydrodynamic bearing (b) ball bearing [IAS 1994] (c) Roller bearing (d) hydrostatic bearing

Description : The most suitable bearing for carrying very heavy loads with slow speed is (a) Hydrodynamic bearing (b) ball bearing [IAS 1994] (c) Roller bearing (d) hydrostatic bearing

Last Answer : (d) hydrostatic bearing

Consider the following pairs of types of bearings and applications: 1. Partial Journal bearing................... Rail wagon axles 2. Full journal bearing ......................Diesel engine crank-shaft 3. Radial bearing ............................Combined radial and axial loads Which of these pairs is/are correctly matched? [IES-2000] (a) 1 alone (b) 1 and 2 (c) 2 and 3 (d) 1, 2 and 3

Description : Consider the following pairs of types of bearings and applications: 1. Partial Journal bearing................... Rail wagon axles 2. Full journal bearing ......................Diesel engine crank-shaft 3. Radial bearing ... matched? [IES-2000] (a) 1 alone (b) 1 and 2 (c) 2 and 3 (d) 1, 2 and 3

Last Answer : (b) 1 and 2

Taper rolling supports a) Axial loads b) Thrust loads c) Both axial and thrust loads d) None of the mentioned

Description : Taper rolling supports a) Axial loads b) Thrust loads c) Both axial and thrust loads d) None of the mentioned

Last Answer : c) Both axial and thrust loads

Angular contact bearing can take thrust as well as radial loads. a) True b) False

Description : Angular contact bearing can take thrust as well as radial loads. a) True b) False

Last Answer : a) True

Which type of threads is recommended for fluctuating loads? a) Fine threads b) Coarse Threads c) Either of fine or coarse d) None of the listed

Description : Which type of threads is recommended for fluctuating loads? a) Fine threads b) Coarse Threads c) Either of fine or coarse d) None of the listed

Last Answer : a) Fine threads

Which process allows controlling grain structure of the product? a) Casting b) Forging c) None of the mentioned d) Die Casting

Description : Which process allows controlling grain structure of the product? a) Casting b) Forging c) None of the mentioned d) Die Casting

Last Answer : b) Forging

Which of the following factors can affect the shape and size of the pulp canal: A. Chemical irritation and caries B. Trauma and function C. Attrition, wear and aging of the patient D. All of the above

Description : Which of the following factors can affect the shape and size of the pulp canal: A. Chemical irritation and caries B. Trauma and function C. Attrition, wear and aging of the patient D. All of the above

Last Answer : D. All of the above

The major difference between breccia and conglomerate is (A)size of grain (B) shape of grain (C) composition of grain (D)all of these

Description : The major difference between breccia and conglomerate is (A)size of grain (B) shape of grain (C) composition of grain (D)all of these

Last Answer : shape of grain

The type of spring used to absorb and release energy in mechanical watches is (A) Helical extension spring (B) Multi-leaf spring (C) Spiral spring (D) Helical torsion spring

Description : The type of spring used to absorb and release energy in mechanical watches is (A) Helical extension spring (B) Multi-leaf spring (C) Spiral spring (D) Helical torsion spring

Last Answer : (C) Spiral spring

A coupling is a mechanical device that temporarily joins two rotating shafts to each other. a) True b) False

Description : A coupling is a mechanical device that temporarily joins two rotating shafts to each other. a) True b) False

Last Answer : b) False

A coupling is a mechanical device that temporarily joins two rotating shafts to each other. a) True b) False

Description : A coupling is a mechanical device that temporarily joins two rotating shafts to each other. a) True b) False

Last Answer : b) False

In the levers of third type, the mechanical advantage is __________ one. (A) Less than (B) Equal to (C) More than (D) None of these

Description : In the levers of third type, the mechanical advantage is __________ one. (A) Less than (B) Equal to (C) More than (D) None of these

Last Answer : (A) Less than

Pick up the correct statement from the following: (A) A combined footing is so proportioned that centre of gravity of supporting area coincides with centre of gravity of two column loads (B) A combined footing may be either rectangular or trapezoidal in shape (C) Trapezoidal shaped footings may be provided under any loading (D) All the above

Description : Pick up the correct statement from the following: (A) A combined footing is so proportioned that centre of gravity of supporting area coincides with centre of gravity of two column loads (B) A ... in shape (C) Trapezoidal shaped footings may be provided under any loading (D) All the above

Last Answer : Answer: Option D

Oil in journal bearing should be applied at the point where load is (A) Nil or lightest (B) Maximum (C) Average (D) Any one of the above

Description : Oil in journal bearing should be applied at the point where load is (A) Nil or lightest (B) Maximum (C) Average (D) Any one of the above

Last Answer : (A) Nil or lightest

Complementary shear stress is a. Parallel to applied stress b. Perpendicular to the applied shear stress c. Inclined to the applied shear stress d. None

Description : Complementary shear stress is a. Parallel to applied stress b. Perpendicular to the applied shear stress c. Inclined to the applied shear stress d. None

Last Answer : b. Perpendicular to the applied shear stress

Complementary shear stress is a. > applied shear stress b. < applied shear stress c. = applied shear stress d. None

Description : Complementary shear stress is a. > applied shear stress b. < applied shear stress c. = applied shear stress d. None

Last Answer : c. = applied shear stress

A complementary shear stress is equal in magnitude and opposite in rotational tendency of an applied (a) Tensile stress (b) Compressive stress (c) Shear stress (d) None

Description : A complementary shear stress is equal in magnitude and opposite in rotational tendency of an applied (a) Tensile stress (b) Compressive stress (c) Shear stress (d) None

Last Answer : (c) Shear stress

The bending moment ‘M’ and a torque ‘T’ is applied on a solid circular shaft. If the maximum bending stress equals to maximum shear stress developed, then ‘M’ is equal to (A) T/2 (B) T (C) 2 T (D) 4 T

Description : The bending moment ‘M’ and a torque ‘T’ is applied on a solid circular shaft. If the maximum bending stress equals to maximum shear stress developed, then ‘M’ is equal to (A) T/2 (B) T (C) 2 T (D) 4 T

Last Answer : (A) T/2

Which of the following facts are true for resilience? a) Ability of material to absorb energy when deformed elastically b) Ability to retain deformation under the application of load or after removal of load c) Ability of material to absorb energy when deformed plastically d) None of the mentioned

Description : Which of the following facts are true for resilience? a) Ability of material to absorb energy when deformed elastically b) Ability to retain deformation under the application of load or after removal ... c) Ability of material to absorb energy when deformed plastically d) None of the mentioned

Last Answer : a) Ability of material to absorb energy when deformed elastically

In which of the following case stress concentration factor is ignored? a) Ductile material under static load b) Ductile material under fluctuating load c) Brittle material under static load

Description : In which of the following case stress concentration factor is ignored? a) Ductile material under static load b) Ductile material under fluctuating load c) Brittle material under static load

Last Answer : a) Ductile material under static load

Can you advise what companies offered extended warranty coverage for GMC Envoy with approximately 155000 miles. I am the original owner and vehicle has no mechanical defects.?

Description : Can you advise what companies offered extended warranty coverage for GMC Envoy with approximately 155000 miles. I am the original owner and vehicle has no mechanical defects.?

Last Answer : To get an extended Vehicle Warranty Plan you can Get a free quote by calling: 877-395-6337 or visiting www.ProtectionDirect.com

Which of the following is not true for cast iron flywheels? a) Excellent damping b) Cheap c) Given complex shape d) Sudden failure

Description : Which of the following is not true for cast iron flywheels? a) Excellent damping b) Cheap c) Given complex shape d) Sudden failure

Last Answer : d) Sudden failure

The region of safety for biaxial stresses is of which shape in the case of maximum distortion energy theorem. a) Ellipse b) Circle c) Rectangle d) Square

Description : The region of safety for biaxial stresses is of which shape in the case of maximum distortion energy theorem. a) Ellipse b) Circle c) Rectangle d) Square

Last Answer : a) Ellipse

The region of safety for biaxial stresses is of which shape in the case of maximum distortion energy theorem. a) Ellipse b) Circle c) Rectangle d) Square

Description : The region of safety for biaxial stresses is of which shape in the case of maximum distortion energy theorem. a) Ellipse b) Circle c) Rectangle d) Square

Last Answer : a) Ellipse

The region of safety in maximum shear stress theory contains which of the given shape a) Hexagon b) Rectangle c) Square d) None of the mentioned

Description : The region of safety in maximum shear stress theory contains which of the given shape a) Hexagon b) Rectangle c) Square d) None of the mentioned

Last Answer : a) Hexagon

If compressive yield stress and tensile yield stress are equivalent, then region of safety from maximum principal stress theory is of which shape? a) Rectangle b) Square c) Circle d) Ellipse

Description : If compressive yield stress and tensile yield stress are equivalent, then region of safety from maximum principal stress theory is of which shape? a) Rectangle b) Square c) Circle d) Ellipse

Last Answer : b) Square

What is error due to imperfection in experimental technique?

Description : What is error due to imperfection in experimental technique?

Last Answer : What is error due to imperfection in experimental technique?

Considered as the main source of an internal noise. A. Device imperfection B. Thermal agitation C. Temperature change D. Flicker

Description : Considered as the main source of an internal noise. A. Device imperfection B. Thermal agitation C. Temperature change D. Flicker

Last Answer : B. Thermal agitation

Dark current in light detectors is caused by ∙ a. Thermally generated carriers in the diode ∙ b. The absence of light input ∙ c. Small leakage current ∙ d. Its imperfection

Description : Dark current in light detectors is caused by ∙ a. Thermally generated carriers in the diode ∙ b. The absence of light input ∙ c. Small leakage current ∙ d. Its imperfection

Last Answer : a. Thermally generated carriers in the diode

Line imperfection in a crystal is called

Last Answer : Line imperfection in a crystal is called edge dislocation.

Not an example for actuator (a) Optical fiber (b) Shape memory alloys (c) Magneto-strictive materials (d) Electro-/Magneto-rheological fluids

Description : Not an example for actuator (a) Optical fiber (b) Shape memory alloys (c) Magneto-strictive materials (d) Electro-/Magneto-rheological fluids

Last Answer : (a) Optical fiber

Maximum hardenability of steel depends upon its (A) Chemical composition (B) Carbon content (C) Grain size (D) Alloying elements content

Description : Maximum hardenability of steel depends upon its (A) Chemical composition (B) Carbon content (C) Grain size (D) Alloying elements content

Last Answer : Option D