Heating and cooling in welding is a. Even b. Non-even c. Cannot say d. None

Heating and cooling in welding is

a. Even

b. Non-even

c. Cannot say

d. None
by

1 Answer

Answer :

b. Non-even
by

Related questions

Among gas and electric arc welding, which has the higher rate of heating? a) Gas welding b) Electric arc welding c) Gas welding and electric arc welding have equal rate of heating d) Cannot be determined

Description : Among gas and electric arc welding, which has the higher rate of heating? a) Gas welding b) Electric arc welding c) Gas welding and electric arc welding have equal rate of heating d) Cannot be determined

Last Answer : b) Electric arc welding

Forge welding involves heating of parts to elastic stage and joint is prepared by impact force. a) Yes b) No, it is done up to plastic stage c) Heating is done up to boiling point d) None of the listed

Description : Forge welding involves heating of parts to elastic stage and joint is prepared by impact force. a) Yes b) No, it is done up to plastic stage c) Heating is done up to boiling point d) None of the listed

Last Answer : b) No, it is done up to plastic stage

Welding requires a. Non-skilled worker b. Skilled worker c. Any worker

Description : Welding requires a. Non-skilled worker b. Skilled worker c. Any worker

Last Answer : b. Skilled worker

Process of welding with respect to riveting takes a. More time b. Less time c. Same time d. None

Description : Process of welding with respect to riveting takes a. More time b. Less time c. Same time d. None

Last Answer : b. Less time

Projection welding is (i) Electric arc welding (ii) Gas welding (iii)Spot welding (iv) None

Description : Projection welding is (i) Electric arc welding (ii) Gas welding (iii)Spot welding (iv) None

Last Answer : (iv) None

Quantity is not a part of the weld symbol (i)Dark circle (ii) Open circle (iii) Angle of weld (iv)Starting and stopping allowance for welding

Description : Quantity is not a part of the weld symbol (i)Dark circle (ii) Open circle (iii) Angle of weld (iv)Starting and stopping allowance for welding

Last Answer : (iv)Starting and stopping allowance for welding

Term which is not a part of the weld symbol (i) Tail (ii) Arrow (iii) Temperature of welding (iv) None

Description : Term which is not a part of the weld symbol (i) Tail (ii) Arrow (iii) Temperature of welding (iv) None

Last Answer : (iii) Temperature of welding

Quantity which is not a part of the weld symbol (i)Length of welding (ii) Weld is made in the welding shop (iii) Welding is on both sides (iv) Machine used in welding

Description : Quantity which is not a part of the weld symbol (i)Length of welding (ii) Weld is made in the welding shop (iii) Welding is on both sides (iv) Machine used in welding

Last Answer : (iv) Machine used in welding

In which case, molten metal is used to do welding? (i) Groove type (ii) spot type (iii) Plug type (iv) None

Description : In which case, molten metal is used to do welding? (i) Groove type (ii) spot type (iii) Plug type (iv) None

Last Answer : (iii) Plug type

Which type of welding is generally used in automobile sector? a) Electric arc welding b) Electric resistance welding c) Gas welding d) Forge welding

Description : Which type of welding is generally used in automobile sector? a) Electric arc welding b) Electric resistance welding c) Gas welding d) Forge welding

Last Answer : b) Electric resistance welding

Filler material is used in electric resistance welding. a) Yes b) No filler material used c) Depends on the type of welding d) None of the listed

Description : Filler material is used in electric resistance welding. a) Yes b) No filler material used c) Depends on the type of welding d) None of the listed

Last Answer : b) No filler material used

In gas welding which of the following is generally used? a) Oxygen-Hydrogen b) Oxygen-Acetylene c) Oxygen-Hydrogen or Oxygen-Acetylene d) None of the mentioned

Description : In gas welding which of the following is generally used? a) Oxygen-Hydrogen b) Oxygen-Acetylene c) Oxygen-Hydrogen or Oxygen-Acetylene d) None of the mentioned

Last Answer : c) Oxygen-Hydrogen or Oxygen-Acetylene

Rails in the field are generally welded by using a) Thermit welding b) Gas welding c) Electric arc welding d) Forge welding

Description : Rails in the field are generally welded by using a) Thermit welding b) Gas welding c) Electric arc welding d) Forge welding

Last Answer : a) Thermit welding

All welding processes require pressure along with heat. a) Yes b) No, fusion doesn’t require c) Can’t be stated d) None of the listed

Description : All welding processes require pressure along with heat. a) Yes b) No, fusion doesn’t require c) Can’t be stated d) None of the listed

Last Answer : b) No, fusion doesn’t require

Thickness of plate is required more in welding than in riveting. a) True b) False

Description : Thickness of plate is required more in welding than in riveting. a) True b) False

Last Answer : b) False

The electric arc welding is a type of ............. welding. (a) forge (b) fusion

Description : The electric arc welding is a type of ............. welding. (a) forge (b) fusion

Last Answer : b) fusion

In a fusion welding process, (a) only heat is used (b) only pressure is used (c) combination of heat and pressure is used (d) none of these

Description : In a fusion welding process, (a) only heat is used (b) only pressure is used (c) combination of heat and pressure is used (d) none of these

Last Answer : (a) only heat is used

Maximum carbon content in welding is usually limited to a) 0.22% b) 0.8% c) 1.5% d) 2%

Description : Maximum carbon content in welding is usually limited to a) 0.22% b) 0.8% c) 1.5% d) 2%

Last Answer : a) 0.22%

Inspection of welded joints with respect to riveted joints is a. Difficult b. Easier c. Cannot say d. None

Description : Inspection of welded joints with respect to riveted joints is a. Difficult b. Easier c. Cannot say d. None

Last Answer : a. Difficult

Split flywheel is made to 1. avoid cooling stress 2. reduce weight 3. increase weight 4. maximize large centrifugal force

Description : Split flywheel is made to 1. avoid cooling stress 2. reduce weight 3. increase weight 4. maximize large centrifugal force

Last Answer : 1. avoid cooling stress

Split flywheel is made to (A) Avoid cooling stresses (B) Minimize large centrifugal forces (C) Reduce weight (D) All of the above

Description : Split flywheel is made to (A) Avoid cooling stresses (B) Minimize large centrifugal forces (C) Reduce weight (D) All of the above

Last Answer : (A) Avoid cooling stresses

Patenting is defined as the cooling below the freezing point of water. a) True b) False

Description : Patenting is defined as the cooling below the freezing point of water. a) True b) False

Last Answer : b) False

When comes down to stress reduction, which one is preferred? a) Solid flywheel b) Split flywheel c) Both have equal stresses d) Cannot be determined

Description : When comes down to stress reduction, which one is preferred? a) Solid flywheel b) Split flywheel c) Both have equal stresses d) Cannot be determined

Last Answer : b) Split flywheel

Which of the following cannot tolerate misalignment? (a) Angular contact bearing (b) Cylinder roller bearing (c) Thrust ball bearings (d) All of the listed

Description : Which of the following cannot tolerate misalignment? (a) Angular contact bearing (b) Cylinder roller bearing (c) Thrust ball bearings (d) All of the listed

Last Answer : (d) All of the listed

Which of the following cannot take the radial load? (a) Cylindrical Roller bearing (b) Taper roller bearing (c) Thrust ball bearing (d) Spherical roller bearing

Description : Which of the following cannot take the radial load? (a) Cylindrical Roller bearing (b) Taper roller bearing (c) Thrust ball bearing (d) Spherical roller bearing

Last Answer : (c) Thrust ball bearing

If we exclude the cost factor, which bearing is preferred? a) Hydrostatic b) Hydrodynamic c) Both are equally preferred d) Cannot be determined

Description : If we exclude the cost factor, which bearing is preferred? a) Hydrostatic b) Hydrodynamic c) Both are equally preferred d) Cannot be determined

Last Answer : a) Hydrostatic

Which of the following cannot tolerate misalignment? a) Angular contact bearing b) Cylinder roller bearing c) Thrust ball bearings d) All of the listed

Description : Which of the following cannot tolerate misalignment? a) Angular contact bearing b) Cylinder roller bearing c) Thrust ball bearings d) All of the listed

Last Answer : d) All of the listed

Which of the following cannot take radial load? a) Cylindrical Roller bearing b) Taper roller bearing c) Thrust ball bearing d) None of the listed

Description : Which of the following cannot take radial load? a) Cylindrical Roller bearing b) Taper roller bearing c) Thrust ball bearing d) None of the listed

Last Answer : c) Thrust ball bearing

If spring index=2.5, what can be concluded about stresses in the wire? a) They are high b) They are negligible c) They are moderate d) Cannot be determined

Description : If spring index=2.5, what can be concluded about stresses in the wire? a) They are high b) They are negligible c) They are moderate d) Cannot be determined

Last Answer : a) They are high

Double full fillet welded joint cannot be used for a plate thickness greater than i. 1/8” ii. 3/8” iii. 5/8” iv. None

Description : Double full fillet welded joint cannot be used for a plate thickness greater than i. 1/8” ii. 3/8” iii. 5/8” iv. None

Last Answer : iii. 5/8”

Single full fillet welded joint cannot be used for a plate thickness greater than i. 1/8” ii. 2/8” iii. 3/8” iv. None

Description : Single full fillet welded joint cannot be used for a plate thickness greater than i. 1/8” ii. 2/8” iii. 3/8” iv. None

Last Answer : iii. 3/8”

Which threads have greater resistance to unscrewing? a) Coarse b) Fine c) They have equal resistance d) Cannot be determined

Description : Which threads have greater resistance to unscrewing? a) Coarse b) Fine c) They have equal resistance d) Cannot be determined

Last Answer : b) Fine

Which of the following requires more space for the rotation of spanner? a) Square Head b) Hexagonal Head c) Both require equal space of rotation d) Cannot be stated

Description : Which of the following requires more space for the rotation of spanner? a) Square Head b) Hexagonal Head c) Both require equal space of rotation d) Cannot be stated

Last Answer : a) Square Head

Which of the following are good for parts that are seldom dismantled. a) Through Bolts b) Tap Bolts c) Studs d) Cannot be stated

Description : Which of the following are good for parts that are seldom dismantled. a) Through Bolts b) Tap Bolts c) Studs d) Cannot be stated

Last Answer : b) Tap Bolts

Efficiency of the screw _______ with increase of coefficient of friction. a) decreases b) increases c) has no effect d) cannot be determined

Description : Efficiency of the screw _______ with increase of coefficient of friction. a) decreases b) increases c) has no effect d) cannot be determined

Last Answer : a) decreases

Use of multiple notches in a V shaped flat plate will a) Reduce the stress concentration b) Increase the stress concentration c) No effect d) Cannot be determined

Description : Use of multiple notches in a V shaped flat plate will a) Reduce the stress concentration b) Increase the stress concentration c) No effect d) Cannot be determined

Last Answer : a) Reduce the stress concentration

Pick out the wrong statement. (A) Different solids have different equilibrium moisture curves (B) Total condenser or reboiler is considered equivalent to one theoretical plate in McCabe-Thiele method of theoretical plate calculation for distillation column (C) Heat removal load on cooler remains constant, even with increase of the reflux ratio in a distillation column (D) Even a forced draft cooling tower cannot cool water below the wet bulb temperature

Description : Pick out the wrong statement. (A) Different solids have different equilibrium moisture curves (B) Total condenser or reboiler is considered equivalent to one theoretical plate in McCabe-Thiele method of ... (D) Even a forced draft cooling tower cannot cool water below the wet bulb temperature

Last Answer : (C) Heat removal load on cooler remains constant, even with increase of the reflux ratio in a distillation column

Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if distilled directly at atmospheric pressure (C) Material cannot be distilled by indirect heating even under low pressure, because of the high boiling temperature (D) Material to be distilled is thermally unstable or has the tendency to react with other components associated with it, at the boiling temperature

Description : Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if ... unstable or has the tendency to react with other components associated with it, at the boiling temperature

Last Answer : (A) Azeotropic mixture is to be separated and the final product is miscible with water

What are the recognized systems for pre heating of rails ends for AT Welding? (i) Oxygen –LPG & Compressed air petrol both* (ii) Only Oxygen –LPG (iii) Only Compressed air petrol both (iv) both are correct

Description : What are the recognized systems for pre heating of rails ends for AT Welding? (i) Oxygen –LPG & Compressed air petrol both* (ii) Only Oxygen –LPG (iii) Only Compressed air petrol both (iv) both are correct

Last Answer : ) Oxygen –LPG & Compressed air petrol both*

What is Pre Heating Temperature of rail ends in AT Welding? (i) 300 ± 20oC (ii) 400 ± 20oC (iii) 500 ± 20oC (iv) 600 ± 20oC *

Description : What is Pre Heating Temperature of rail ends in AT Welding? (i) 300 ± 20oC (ii) 400 ± 20oC (iii) 500 ± 20oC (iv) 600 ± 20oC *

Last Answer : (iv) 600 ± 20oC *

During AT welding reaction is ? (i) Exothermic .* (ii) Endothermic (iii) No Reaction (iv) Heating

Description : During AT welding reaction is ? (i) Exothermic .* (ii) Endothermic (iii) No Reaction (iv) Heating

Last Answer : (i) Exothermic .*

State the types of heating and welding.

Description : State the types of heating and welding.

Last Answer : a) Types of heating :  1) Power frequency electric heating:  i) Resistance heating:  a) Direct resistance heating  b) Indirect resistance heating  ii) Arc Heating:  a) Direct arc ... shielded welding b) unshielded welding  2) Metal Arc Welding: a) shielded welding b) unshielded welding

The type of spring used to achieve any linear or non-linear load-deflection characteristic is (A) Spiral spring (B) Non-ferrous spring (C) Belleville (coned disk) spring (D) Torsion spring

Description : The type of spring used to achieve any linear or non-linear load-deflection characteristic is (A) Spiral spring (B) Non-ferrous spring (C) Belleville (coned disk) spring (D) Torsion spring

Last Answer : (C) Belleville (coned disk) spring

Belleville spring can only produce linear load deflection characteristics. a) Only linear b) Linear as well as non linear c) Non-linear d) None of the mentioned

Description : Belleville spring can only produce linear load deflection characteristics. a) Only linear b) Linear as well as non linear c) Non-linear d) None of the mentioned

Last Answer : b) Linear as well as non linear

Threaded joints are non-separable joints. a) True b) False

Description : Threaded joints are non-separable joints. a) True b) False

Last Answer : b) False

In S-N diagram, the graph plotted between fatigue strength and number of stress cycles becomes horizontal for which type of materials? a. Ferrous materials b. Non-ferrous materials c. Both a. and b. d. None of the above

Description : In S-N diagram, the graph plotted between fatigue strength and number of stress cycles becomes horizontal for which type of materials? a. Ferrous materials b. Non-ferrous materials c. Both a. and b. d. None of the above

Last Answer : a. Ferrous materials

Are Scoville numbers constant, or do they increase/decrease over time and with heating/cooling?

Description : Are Scoville numbers constant, or do they increase/decrease over time and with heating/cooling?

Last Answer : I have wondered this! What about allowing them to ripen for longer before picking? Will a green Anaheim or Poblano have a higher Scoville if they are allowed to redden som before picking? Wonderful Q, @elbanditoroso, I hope someone here actually knows. And, BTW, sorry I couldn’t answer.

If you were designing a slightly-better-than average new house, what Green- or alternate energy / heating / cooling features or systems would you incorporate?

Description : If you were designing a slightly-better-than average new house, what Green- or alternate energy / heating / cooling features or systems would you incorporate?

Last Answer : Geothermal would be a must. I’d want a large, southern-facing Tesla solar roof and power walls, some kind of rainwater storage solution, veggie garden/compost, spray foam insulation.

What are your opinions about these 2 Questions related to heating and cooling?

Description : What are your opinions about these 2 Questions related to heating and cooling?

Last Answer : answer:As far as the politicians go, they are reptiles and require heat to survive. If refrigeration didn’t exist or cost 10x more, we’d all still be hanging out on front porches as our not-so distant ancestors did.

Do cats really consider their humans as interchangeable heating pads or cooling units?

Description : Do cats really consider their humans as interchangeable heating pads or cooling units?

Last Answer : People are furniture (and heating pads) for cats.