Description : What is the share of urban population in the total population of Pakistan? A. 44.8% B. 52.5% C. 40.2% D. None of these
Last Answer : ANSWER: A
Description : Present rate of interested on on 1, 2, 4, 5 years fixed deposit(TD) is a) 6.25%, 6.50%, 7.25%, 7.50% b) 7.25%, 7.50%, 8%, 8.2% c) 8.2%, 8.3%, 8.4%, 8.5% d) None of these
Last Answer : c) 8.2%, 8.3%, 8.4%, 8.5%
Description : The rate of interest in RD account opened before 01 Dec 11 and on or after 01 Dec 2011 and up to 31 Mar 12 is a) 6.5%, 7% b) 7.5%, 8% c) 8%, 8.5% d) 8%, 8.2%
Last Answer : b) 7.5%, 8%
Description : The concentration of Fluoride in the topical NaF A. 2% B. 5% C. 8% D. 10%
Last Answer : B. 5%
Description : The carbohydrate content of Ig M is about (A) 2.8% (B) 6.4% (C) 8.0% (D) 10.2%
Last Answer : Answer : D
Description : The percentage of carbon in low carbon steel is A. 0.05% B. 0.15% C. 0.3% D. 0.5%
Last Answer : B. 0.15%
Description : The Ratio of Urdu speaking population in Pakistan is: A. 8% B. 12% C. 16% D. 22%
Description : Biurate content in urea is (A)1.5% (B) 4% (C)2% (D) 5%
Last Answer : (C)2%
Description : The cement becomes useless if its absorbed moisture content exceeds [ A ] 1% [ B ] 2% [ C ] 3% [ D ] 5%
Last Answer : [ D ] 5%
Description : The bulking of sand with 2% moisture content is about a) 5% b) 10% c) 15%* d) 20%
Last Answer : c) 15%*
Description : Explain higher and lower calorific value of a coal having following composition by mass Carbon 81%,Hydrogen 7%, Oxygen 8%,Nitrogen 2.5%, sulphur 1.5% and remaining is ash
Last Answer : Carbon C = 81% = 0.81 Hydrogen = H2 = 7% = 0.07 Oxygen = O2 = 8% = 0.08 Nitrogen = N = 2.5% = 0.025 Sulphur = S =1.5% = 0.015 Ash = 2.5% = 0.025 Dulong's formula: H.C.V. of coal = 33800 C + 144500 ... = H.C.V.- 9H2 x 2442 KJ / Kg = 36187.5- 9 x 0.07 x 2442 L.C.V. of coal = 34649.04 KJ / Kg
Description : SBI has been named as domestic systemically important banks (D-SIBs) this year. What additional capital it will have to maintain as a percent of loans and investments? A) 0.2% B) 0.4% C) 0.6% D) 0.8% E) None of these
Last Answer : C) 0.6% Explanation: Based on the methodology announced by the central bank, SBI will need to maintain additional capital equivalent to 0.6 per cent of its loans and investments while ICICI will need to maintain 0.2 per cent more.
Description : The limits of percentage p of the longitudinal reinforcement in a column is given by (A) 0.15% to 2% (B) 0.8% to 4% (C) 0.8% to 6% (D) 0.8% to 8%
Last Answer : Answer: Option C
Description : If the price of coffee falls by 8% and the demand for Tea declines by 2%. The corss price elasticity of demand for Tea is (a) 0.45 ; (b) 0.25 ; (c) +0.44 ; (d) -0.30
Last Answer : (b) 0.25 ;
Description : How much of the total area is cultivated in Pakistan? A. 19.5% B. 20% C. 22% D. 25%
Last Answer : ANSWER: D
Description : If the compression ratio of an engine working on Otto cycle is increased from 5 to 7 the percentage increase in efficiency will be a. 2% b. 4% c. 8% d. 14%
Last Answer : ANSWER d. 14%
Description : What is the approximately Share of Pakistan population in the total population of World? A. 2.7% B. 2.8% C. 3.2% D. 4.2%
Description : The Agriculture sector contributed _______ percent in GDP during 2016-17 A. 19% of GDP B. 19.8% of GDP C. 20.2% of GDP D. 21% of GDP
Last Answer : ANSWER: B
Description : Adult human brain is about-----% of the total body weight. A. 2% (Answer) B. 3% C. 7% D. 8%
Last Answer : A. 2% (Answer)
Description : Which of the following would require least amount of secondary air for combustion? (A) Coke breeze containing 25% ash and 2% volatile matter (B) Anthracite containing 10% volatile matter and 8% ash ... ash and 25% volatile matter (D) Semi-bituminous coal containing 25% ash and 20% volatile matter
Last Answer : (A) Coke breeze containing 25% ash and 2% volatile matter
Description : If there are 50 firms in a industry, each selling 2% of the total sales, the concentration ratio is: a. 50% b. 2% € c. 100% d. 8%
Last Answer : d. 8%
Description : 34.8% x 950 – 33.2% of 850 = ? a) 58.4 b) 48.4 c) 56.4 d) 68.9 e) 76.3
Last Answer : 34.8% x 950 – 33.2% of 850 = ? Sol: 0.348 x 950 – 0.332 x 850=? 330.6 – 282.2=? ?= 48.4 Answer: b)
Description : Capital employed is Rs.50,000 Trading Profit amounted Rs.12,200, Rs.15,000 and Rs.2000 loss for 2016, 2017 and 2018 respectively. Rate of interest is 8% and the rate of risk is 2% Remuneration from alternative employment of the ... A Rs.8,000 B Rs.8,800 C Rs.8,850 D Rs.9,500 ANS: Rs.8,850
Last Answer : A
Description : Find: (i) 32% of 425 (ii) 1623% of 16 (iii) 6.5% of 400 (iv) 136% of 70 (v) 2.8% of 35 (vi) 0.6% of 45 -Maths
Last Answer : answer:
Description : As per IS : 456, the reinforcement in a column should not be less than (A) 0.5% and not more than 5% of cross-sectional area (B) 0.6% and not more than 6% of cross-sectional area (C) 0.7% and not more than 7% of cross-sectional area (D) 0.8% and not more than 8% of cross-sectional area
Last Answer : Answer: Option D
Description : (1) Calcium silicate and calcium alurninate Explanation: Portland cement is the most common type of cement in general use around the world because it is a basic ingredient of concrete, mortar, stucco ... limited amount of calcium sulfate (which controls the set time) and up to 5% minor constituents.
Last Answer : Milk is a colloidal system in which: (1) Water is dispersed in fat (2) Fat is dispersed in water (3) Fat and water are dispersed in each other (4) Fat is dissolved
Description : Ball bearings are, usually, made from (a) low carbon steel (b) high carbon steel (c) medium carbon steel (d) chrome steel
Last Answer : (d) chrome steel
Description : Heating and cooling in welding is a. Even b. Non-even c. Cannot say d. None
Last Answer : b. Non-even
Description : Welding requires a. Non-skilled worker b. Skilled worker c. Any worker
Last Answer : b. Skilled worker
Description : Process of welding with respect to riveting takes a. More time b. Less time c. Same time d. None
Last Answer : b. Less time
Description : Projection welding is (i) Electric arc welding (ii) Gas welding (iii)Spot welding (iv) None
Last Answer : (iv) None
Description : Quantity is not a part of the weld symbol (i)Dark circle (ii) Open circle (iii) Angle of weld (iv)Starting and stopping allowance for welding
Last Answer : (iv)Starting and stopping allowance for welding
Description : Term which is not a part of the weld symbol (i) Tail (ii) Arrow (iii) Temperature of welding (iv) None
Last Answer : (iii) Temperature of welding
Description : Quantity which is not a part of the weld symbol (i)Length of welding (ii) Weld is made in the welding shop (iii) Welding is on both sides (iv) Machine used in welding
Last Answer : (iv) Machine used in welding
Description : In which case, molten metal is used to do welding? (i) Groove type (ii) spot type (iii) Plug type (iv) None
Last Answer : (iii) Plug type
Description : Which type of welding is generally used in automobile sector? a) Electric arc welding b) Electric resistance welding c) Gas welding d) Forge welding
Last Answer : b) Electric resistance welding
Description : Filler material is used in electric resistance welding. a) Yes b) No filler material used c) Depends on the type of welding d) None of the listed
Last Answer : b) No filler material used
Description : Forge welding involves heating of parts to elastic stage and joint is prepared by impact force. a) Yes b) No, it is done up to plastic stage c) Heating is done up to boiling point d) None of the listed
Last Answer : b) No, it is done up to plastic stage
Description : Among gas and electric arc welding, which has the higher rate of heating? a) Gas welding b) Electric arc welding c) Gas welding and electric arc welding have equal rate of heating d) Cannot be determined
Last Answer : b) Electric arc welding
Description : In gas welding which of the following is generally used? a) Oxygen-Hydrogen b) Oxygen-Acetylene c) Oxygen-Hydrogen or Oxygen-Acetylene d) None of the mentioned
Last Answer : c) Oxygen-Hydrogen or Oxygen-Acetylene
Description : Rails in the field are generally welded by using a) Thermit welding b) Gas welding c) Electric arc welding d) Forge welding
Last Answer : a) Thermit welding
Description : All welding processes require pressure along with heat. a) Yes b) No, fusion doesn’t require c) Can’t be stated d) None of the listed
Last Answer : b) No, fusion doesn’t require
Description : Thickness of plate is required more in welding than in riveting. a) True b) False
Last Answer : b) False
Description : The electric arc welding is a type of ............. welding. (a) forge (b) fusion
Last Answer : b) fusion
Description : In a fusion welding process, (a) only heat is used (b) only pressure is used (c) combination of heat and pressure is used (d) none of these
Last Answer : (a) only heat is used
Description : According to 2017 census what is the share of FATA in the total Population of Pakistan A. 3% B. 2% C. 1% D. 0.5%