State and justify material for leaf spring.

State and justify material for leaf spring.
by

1 Answer

Answer :

Leaf spring:-

Material:- Plain carbon steel having 0.9 to 1.0% carbon. 

Justification: - The leaves are heat treated after forming processes. The heat treatment of spring steel produces greater strength and therefore greater load capacity, greater range of deflection and better fatigue properties. 

by

Related questions

Why nipping is provided in leaf spring?

Description : Why nipping is provided in leaf spring?

Last Answer : When the central bolt holding the leaves is tightened, the full length leaf bend back as shown by dotted line. And will have an initial stress in opposite direction. The graduated leaves will ... , all the leaves are equally stressed. So for this reason nipping is provided in leaf spring. 

State and justify material for push rod.

Description : State and justify material for push rod.

Last Answer : Material:- 1018 steel tubing Push rods are typically made of 1018 steel tubing, which is not strong enough for springs that have more than 400 psi of open pressure, or engines that exceed 7,000 ... 8% - 1.1% molybdenum for strength. Pushrods made of 4130 or 4140 Chromoly tubing are much stronger

State functions and materials for front axle. Draw proportionate diagram of front axle showing cross-section at different positions.

Description : State functions and materials for front axle. Draw proportionate diagram of front axle showing cross-section at different positions. 

Last Answer : The functions of front axle :  1) It supports the weight of front part of the vehicle. 2) It facilitates steering. 3) It absorbs shocks which are transmitted due to road surface irregularities. 4) It ... is usually a steel drop forging having 0.4 % carbon steel or 1-3 % nickel steel. 

State functions and name suitable materials for connecting rod. Select suitable crosssection for connecting rod with justification

Description : State functions and name suitable materials for connecting rod. Select suitable crosssection for connecting rod with justification

Last Answer : Functions of connecting rod: A connecting rod, also called a con rod, is the part of a piston engine which connects the piston to the crankshaft. Together with the crank, the connecting rod ... a connecting rod may have rectangular section. For slow speed engines, circular sections may be used.

State any two uses of each of the following. (i) Stress-strain diagram (ii) S-N curve

Description : State any two uses of each of the following. (i) Stress-strain diagram (ii) S-N curve

Last Answer : (i) Stress-Strain diagram: 1. Stress-strain diagram is used to find out strength, elasticity, stiffness, ductility of material. 2. From stress-strain diagram, elongation of material is found out. 3 ... . 3. It is used to find out Effect of Surface Finish on Endurance Limit-Surface Finish Factor.

State different modes of failure of automobile components.

Description : State different modes of failure of automobile components.

Last Answer : 1. Failure of automobile components in Tension 2. Failure of automobile components in Shear 3. Failure of automobile components in Bending 4. Failure of automobile components in compression ... Failure of automobile components due to fatigue 10. Failure of automobile components due to crushing

Explain basic automobile component design procedure

Description : Explain basic automobile component design procedure

Last Answer : Following procedure is carried out for designing any machine element: 1. Need: - First of all, make a complete statement of the problem, indicating the need, aim or purpose for which the machine is ... suggested. 8. Production: - The component, as per the drawing, is manufactured in the workshop. 

Explain the terms of preferred number and standardization.

Description : Explain the terms of preferred number and standardization.

Last Answer : i) Preferred number: Preferred numbers (also called preferred values) are standard guidelines for choosing exact product dimensions within a given set of constraints. The system is based on the use of ... , quality and efficiency of product. 8. Better utilization of labour, machine and time

Describe the design procedure for rocker arm.

Description : Describe the design procedure for rocker arm.

Last Answer : In designing a rocker arm the following procedure may be followed : 1. Rocker arm is usually I-Section it is subjected to bending moment. To find bending moment it is assumed that the arm of ... twice the diameter of the stud. The depth of section is also taken twice the diameter of stud.

List basic design requirement of connecting rod.

Description : List basic design requirement of connecting rod.

Last Answer : In designing a connecting rod for I.C. engine, the following points should be taken into consideration : Strength to withstand the high inertia forces. Minimum mass to minimise ... undue wear. High speed reciprocation without noise. Rigid construction to withstand mechanical distortion.

Sketch the method to reduced stress concentration in cylindrical members with holes.

Description : Sketch the method to reduced stress concentration in cylindrical members with holes.

Last Answer : The methods of reducing stress concentration in cylindrical members with shoulders hole, subjected to tensile load. 

Describe aesthetics in automobile component design .

Description : Describe aesthetics in automobile component design .

Last Answer : Aesthetics in automobile Design - The appearance should contribute to the performance of the product, thought the extent of contribution varies from product to product for example chromium plating of automobiles ... of the product for example. The aerodynamic shape of the car increases the speed.

List the functions of cylinder block

Description : List the functions of cylinder block 

Last Answer : The cylinder block has the following functions: 1. The main functions of the cylinder block are maintaining the engine's stability and lubrication while withstanding a variety of temperatures and ... ideal effect, and the power generated by airframe can be transmitted through the follower part.

Define the terms. (i)Factor of safety (ii)working stress

Description : Define the terms. (i)Factor of safety (ii)working stress

Last Answer : (i) Factor of Safety: Factor of safety is defined as the ratio of the maximum stress to the working stress or design stress. Mathematically,  In Case of Ductile Material, (ii) ... : It is defined as the ratio of actual axial load and the original cross section of the specimen 

we've planted a white swamp oak tree early spring. the leaves are turning brown on outside of leaf. not enough water?

Description : we've planted a white swamp oak tree early spring. the leaves are turning brown on outside of leaf. not enough water?

Last Answer : Need Answer

My dwarf Japanese maple did not leaf out this spring.

Description : My dwarf Japanese maple did not leaf out this spring.

Last Answer : I would wait & see................we just had frost several nights ago. That will kill off new leaves, but it might come back.

when do rose of sharon bushes leaf out in the spring?

Description : when do rose of sharon bushes leaf out in the spring?

Last Answer : Rose of Sharon are one of the last shrubs to leave out in spring.I would wait another month before I pulled them up.They might just be extra slow.

The longest leaf in Semi-elliptic leaf spring is known as (A) chief leaf (B) master leaf (C) major leaf (D) higher leaf

Description : The longest leaf in Semi-elliptic leaf spring is known as (A) chief leaf (B) master leaf (C) major leaf (D) higher leaf

Last Answer : (B) master leaf

The type of spring used to absorb and release energy in mechanical watches is (A) Helical extension spring (B) Multi-leaf spring (C) Spiral spring (D) Helical torsion spring

Description : The type of spring used to absorb and release energy in mechanical watches is (A) Helical extension spring (B) Multi-leaf spring (C) Spiral spring (D) Helical torsion spring

Last Answer : (C) Spiral spring

The type of spring used to achieve greater load carrying capacity within given space is (A) Spiral spring (B) Springs in series (C) Multi-leaf spring (D) Concentric springs

Description : The type of spring used to achieve greater load carrying capacity within given space is (A) Spiral spring (B) Springs in series (C) Multi-leaf spring (D) Concentric springs

Last Answer : (D) Concentric springs

The type of spring used to measure weights in spring balance is, (A) Helical extension spring (B) Multi-leaf spring (C) Spiral spring

Description : The type of spring used to measure weights in spring balance is, (A) Helical extension spring (B) Multi-leaf spring (C) Spiral spring

Last Answer : (A) Helical extension spring

The type of spring used in door hinges is, (A) Helical extension spring (B) Multi-leaf spring (C) Spiral spring (D) Helical torsion spring

Description : The type of spring used in door hinges is, (A) Helical extension spring (B) Multi-leaf spring (C) Spiral spring (D) Helical torsion spring

Last Answer : (D) Helical torsion spring

The type of spring used to absorb shocks and vibrations in vehicles is, (A) Helical extension spring (B) Multi-leaf spring (C) Spiral spring (D) Belleville (coned disk) spring

Description : The type of spring used to absorb shocks and vibrations in vehicles is, (A) Helical extension spring (B) Multi-leaf spring (C) Spiral spring (D) Belleville (coned disk) spring

Last Answer : (B) Multi-leaf spring

The longest leaf in a leaf spring is called centre leaf. a) It is called middle leaf b) It is called master leaf c) Yes d) None of the listed

Description : The longest leaf in a leaf spring is called centre leaf. a) It is called middle leaf b) It is called master leaf c) Yes d) None of the listed

Last Answer : b) It is called master leaf

The type of spring used to achieve greater load carrying capacity within given space is (a)spiral spring (b) springs in series (c)multi-leaf spring (d) concentric spring

Description : The type of spring used to achieve greater load carrying capacity within given space is (a)spiral spring (b) springs in series (c)multi-leaf spring (d) concentric spring

Last Answer : (d) concentric spring

With a leaf spring type of suspension, interference between steering and suspension system can be (a) front end of the spring is pin joined and the rear end is shackled (b) front end of the spring is shackled and the rear end is pin joined (c) both end of the spring are shackled (d) both end of the spring are pin joined

Description : With a leaf spring type of suspension, interference between steering and suspension system can be (a) front end of the spring is pin joined and the rear end is shackled (b) front end of the spring is ... joined (c) both end of the spring are shackled (d) both end of the spring are pin joined

Last Answer : (b) front end of the spring is shackled and the rear end is pin joined

The clips placed at intervals along some leaf spring to prevent spring leaf separation on rebound are (a) rebound clips (b) separation clips (c) interval clips (d)relief clips

Description : The clips placed at intervals along some leaf spring to prevent spring leaf separation on rebound are (a) rebound clips (b) separation clips (c) interval clips (d)relief clips

Last Answer : (a) rebound clips

The device that permits variation in the distance between the spring eyes of a leaf spring as the spring flexes is called (a) Spring shackle (b) spring U bolt (c) spring hanger (d) spring leaf

Description : The device that permits variation in the distance between the spring eyes of a leaf spring as the spring flexes is called (a) Spring shackle (b) spring U bolt (c) spring hanger (d) spring leaf

Last Answer : (a) Spring shackle

Leaf spring for vehicles are nipped to (a) To vary the effective length of the spring (b) to increase the interleaf friction (c) Improve the load carrying capacity of spring (d) ensure that all leaves are uniformly stressed during loading

Description : Leaf spring for vehicles are nipped to (a) To vary the effective length of the spring (b) to increase the interleaf friction (c) Improve the load carrying capacity of spring (d) ensure that all leaves are uniformly stressed during loading

Last Answer : (d) ensure that all leaves are uniformly stressed during loading

A leaf spring consists of 3 extra full length leaves and 14 graduated length leaves. The maximum force that can act on the spring is 70kN and the distance between eyes of the spring is 1.2m. Width and thickness of the leaves are 100mm and 12mm respectively. Calculate the initial pre load required to close the nip. (a) 4332.2N (b) 4674.1N (c) 4985.4N (d) Can’t be determined

Description : A leaf spring consists of 3 extra full length leaves and 14 graduated length leaves. The maximum force that can act on the spring is 70kN and the distance between eyes of the spring is 1.2m. Width and thickness of the ... close the nip. (a) 4332.2N (b) 4674.1N (c) 4985.4N (d) Can't be determined

Last Answer : (b) 4674.1N

A leaf spring consists of 3 extra full length leaves and 14 graduated length leaves. The maximum force that can act on the spring is 70kN and the distance between eyes of the spring is 1.2m. Width and thickness of the leaves are 100mm and 12mm respectively. If modulus of elasticity is 207000N/mm², calculate the initial nip. (a) 26.8mm (b) 24.9mm (c) 22.5mm (d)23.1mm

Description : A leaf spring consists of 3 extra full length leaves and 14 graduated length leaves. The maximum force that can act on the spring is 70kN and the distance between eyes of the spring is 1.2m. Width and thickness of the ... /mm², calculate the initial nip. (a) 26.8mm (b) 24.9mm (c) 22.5mm (d)23.1mm

Last Answer : b) 24.9mm

The spring used in mechanical toys is (a) Leaf spring (b) Spiral spring (c) Helical spring (d) All of these

Description : The spring used in mechanical toys is (a) Leaf spring (b) Spiral spring (c) Helical spring (d) All of these

Last Answer : (b) Spiral spring

A spring used to absorb shocks and vibrations is (a) Close-coil helical spring (b) Open coiled helical spring (c) Spiral spring (d) Leaf spring

Description : A spring used to absorb shocks and vibrations is (a) Close-coil helical spring (b) Open coiled helical spring (c) Spiral spring (d) Leaf spring

Last Answer : (d) Leaf spring

Strain energy in a leaf spring is (a) W x δ (b) W x δ/3 (c) W x δ/2 (d) None

Description : Strain energy in a leaf spring is (a) W x δ (b) W x δ/3 (c) W x δ/2 (d) None

Last Answer : (c) W x δ/2

Overlap in a leaf spring is (a) L/n (b) L/2n (c) L/3n (d) None

Description : Overlap in a leaf spring is (a) L/n (b) L/2n (c) L/3n (d) None

Last Answer : (b) L/2n

Maximum deflection in a leaf spring is given by (a) 3WL3/4Enbt3 (b) 3WL3/8Enbt3 (c) 3WL3/16Enbt3 (d) None

Description : Maximum deflection in a leaf spring is given by (a) 3WL3/4Enbt3 (b) 3WL3/8Enbt3 (c) 3WL3/16Enbt3 (d) None

Last Answer : (b) 3WL3/8Enbt3

Maximum bending stress in a leaf spring is (a) 3WL/4nbt2(b) 3WL/8nbt2(c) 3WL/2nbt2(d) None

Description : Maximum bending stress in a leaf spring is (a) 3WL/4nbt2(b) 3WL/8nbt2(c) 3WL/2nbt2(d) None

Last Answer : (c) 3WL/2nbt2

The spring used in mechanical toys is (a) Leaf spring (b) Spiral spring (c) Helical spring (d) All of these

Description : The spring used in mechanical toys is (a) Leaf spring (b) Spiral spring (c) Helical spring (d) All of these

Last Answer : (b) Spiral spring

A spring used to absorb shocks and vibrations is (a) Close-coil helical spring (b) Open coiled helical spring (c) Spiral spring (d) Leaf spring

Description : A spring used to absorb shocks and vibrations is (a) Close-coil helical spring (b) Open coiled helical spring (c) Spiral spring (d) Leaf spring

Last Answer : d) Leaf spring

Draw the constructional arrangement of ‘Leaf Spring’ showing all the Parts.

Description : Draw the constructional arrangement of ‘Leaf Spring’ showing all the Parts.

Last Answer : Figure: Constructional Arrangement of Leaf Spring  

What is the myth of protection? [A] It characterizes men as protective and women as protected [B] It is used to justify and shape material security policies [C] It has been challenged by changing gender role in contemporary warfare [D] All of the above

Description : What is the myth of protection? [A] It characterizes men as protective and women as protected [B] It is used to justify and shape material security policies [C] It has been challenged by changing gender role in contemporary warfare [D] All of the above

Last Answer : [D] All of the above

Select a material for a frame of 350 CC motorcycle and justify its use.

Description : Select a material for a frame of 350 CC motorcycle and justify its use.

Last Answer : The material used for heavy duty motor cycle like 350 cc motor cycle depends upon design, strength and type of frame being used. Generally, Steel is commonly used material due to reasons like joining of ... known as AISI4140 steel. The some parts are made of aluminum alloy to reduce the weight.  

An example of an organic material is __________. a. Pea gravel b. Perlite c. Leaf mold d. Vermiculite

Description : An example of an organic material is __________. a. Pea gravel b. Perlite c. Leaf mold d. Vermiculite

Last Answer : Leaf mold

Best material for the study of mitosis in laboratory is (a) anther (b) root tip (c) leaf tip (d) ovary

Description : Best material for the study of mitosis in laboratory is (a) anther (b) root tip (c) leaf tip (d) ovary

Last Answer : b) root tip

If extension in spring is proportional to load applied, then material obeys A. Newton's law B. gravitational law C. Charles's law D. Hooke's law

Description : If extension in spring is proportional to load applied, then material obeys A. Newton's law B. gravitational law C. Charles's law D. Hooke's law

Last Answer : Hooke's law

When two concentric springs are made of same material, having same free length and compressed equally by axial load, then the load shared by each spring is proportional to (A) Spring index of each spring (B) Wire diameter of each spring (C) Mean coil diameter of each spring (D) Square of wire diameter of each spring

Description : When two concentric springs are made of same material, having same free length and compressed equally by axial load, then the load shared by each spring is proportional to (A) Spring index of each spring ... spring (C) Mean coil diameter of each spring (D) Square of wire diameter of each spring

Last Answer : (D) Square of wire diameter of each spring

A closely coiled helical spring of radius R, contains n turns and is subjected to an axial load W. If the radius of the coil wire is r and modulus of rigidity of the coil material is C, the deflection of the coil is (A) WR3n/Cr4 (B) 2WR3n/Cr4 (C) 3WR3n/Cr4 (D) 4WR3n/Cr

Description : A closely coiled helical spring of radius R, contains n turns and is subjected to an axial load W. If  the radius of the coil wire is r and modulus of rigidity of the coil material is C, the deflection of the  coil is  (A) WR3n/Cr4 (B) 2WR3n/Cr4 (C) 3WR3n/Cr4 (D) 4WR3n/Cr

Last Answer : (D) 4WR3n/Cr

A closely coiled helical spring of radius R, contains n turns and is subjected to an axial loadW. If the radius of the coil wire is r and modulus of rigidity of the coil material is C, the stress developed in the helical spring is (A) WR/ 3 (B) 2WR/ 3 (C) 2WR/ 2 (D) 4WR/ 2

Description : A closely coiled helical spring of radius R, contains n turns and is subjected to an axial loadW. If the radius of the coil wire is r and modulus of rigidity of the coil material is C, the stress developed in the helical spring is (A) WR/ 3 (B) 2WR/ 3 (C) 2WR/ 2 (D) 4WR/ 2

Last Answer : (B) 2WR/ 3

Often earing defects are found during deep drawing operation, because the (A) Surface finish of the sheet is poor (B) Sheet material has been given substantial spring back (C) Starting sheet has planer anisotropy due to its texture (D) Starting sheet has normal anisotropy due to its texture

Description : Often earing defects are found during deep drawing operation, because the (A) Surface finish of the sheet is poor (B) Sheet material has been given substantial spring back (C) Starting sheet has planer anisotropy due to its texture (D) Starting sheet has normal anisotropy due to its texture

Last Answer : (C) Starting sheet has planer anisotropy due to its texture

spring material should have low (A) Elastic limit (B) Deflection value (C) Fatigue resistance (D) None of these

Description : spring material should have low (A) Elastic limit (B) Deflection value (C) Fatigue resistance (D) None of these

Last Answer : Option D