Vehicle will accelerate as long as A. air resistance is greater than thrust B. air resistance is greater than inertia C. thrust is greater than air resistance and friction D. friction is greater than thrust

Vehicle will accelerate as long as

A. air resistance is greater than thrust

B. air resistance is greater than inertia

C. thrust is greater than air resistance and friction

D. friction is greater than thrust


by

1 Answer

Answer :

thrust is greater than air resistance and friction
by

Related questions

If you throw a ball across a field, which forces are most likely to cause it to stop? a) Inertia and Magnetism b) Friction and Gravity c) Wind resistance and magnetism d) Gravity and Inertia

Description : If you throw a ball across a field, which forces are most likely to cause it to stop? a) Inertia and Magnetism b) Friction and Gravity c) Wind resistance and magnetism d) Gravity and Inertia

Last Answer : b) Friction and Gravity

It is difficult to walk on ice because of ______. (1) absence of friction (2) less inertia (3) more inertia (4) more mass

Description : It is difficult to walk on ice because of ______. (1) absence of friction (2) less inertia (3) more inertia (4) more mass

Last Answer : (1) absence of friction Explanation: It's difficult to walk on ice because there's very little friction between the bottoms of your shoes and the ice. Friction is a force that opposes motion.

Newton's first law is also known as __. (1) Law of Friction (2) Law of Momentum (3) Law of Inertia (4) Law of Motion

Description : Newton's first law is also known as __. (1) Law of Friction (2) Law of Momentum (3) Law of Inertia (4) Law of Motion

Last Answer : (3) Law of Inertia Explanation: Newton's first law of motion is also known as the law of inenrtia. It states that an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force.

In a braking test, a vehicle travelling at 36 km ph was stopped at a braking distance of 8.0 m. The average value of the vehicle's skid resistance (friction coefficient) is (A) 0.64 (B) 6.25 (C) 0.16 (D) None of these

Description : In a braking test, a vehicle travelling at 36 km ph was stopped at a braking distance of 8.0 m. The average value of the vehicle's skid resistance (friction coefficient) is (A) 0.64 (B) 6.25 (C) 0.16 (D) None of these

Last Answer : Answer: Option C

Which of the following bearing will have least coefficient of friction a.Single ball bearing b.Cylinderical roller bearing c.Self aligury bearing d.Thrust ball bearing e.Tapered bearing

Description : Which of the following bearing will have least coefficient of friction a.Single ball bearing b.Cylinderical roller bearing c.Self aligury bearing d.Thrust ball bearing e.Tapered bearing

Last Answer : e. Tapered bearing

What happens when friction is equal to the thrust force?

Description : What happens when friction is equal to the thrust force?

Last Answer : In that case, the object won't budge.

The antifriction bearings (a) have low starting and low running friction at moderate speeds (b) have a high initial cost (c) can carry both radial and thrust loads (d) all the mentioned

Description : The antifriction bearings (a) have low starting and low running friction at moderate speeds (b) have a high initial cost (c) can carry both radial and thrust loads (d) all the mentioned

Last Answer : (d) all the mentioned

Match List-I (Type of Anti-friction bearing) with List-II (Specific Use) and select the using the code given below the Lists: [IES-2006] List-I List -II A. Self-aligning ball bearing 1. For pure axial load B. Taper roller bearing 2. For hinged condition C. Deep groove ball bearing 3. For pure radial load D. Thrust ball bearing 4. For axial and radial load A B C D A B C D (a) 2 1 3 4 (b) 3 4 2 1 (c) 2 4 3 1 (d) 3 1 2 4

Description : Match List-I (Type of Anti-friction bearing) with List-II (Specific Use) and select the using the code given below the Lists: [IES-2006] List-I List -II A. Self-aligning ball bearing 1. For pure axial load B. Taper roller bearing 2. For ... C D (a) 2 1 3 4 (b) 3 4 2 1 (c) 2 4 3 1 (d) 3 1 2 4

Last Answer : (c) 2 4 3 1

Vehicle tyres are inflated properly – (1) to ensure smooth running. (2) to allow the vehicle to take more load. (3) to avoid skidding and to minimize friction (4) to go fast and save fuel.

Description : Vehicle tyres are inflated properly – (1) to ensure smooth running. (2) to allow the vehicle to take more load. (3) to avoid skidding and to minimize friction (4) to go fast and save fuel.

Last Answer : (3) to avoid skidding and to minimize friction Explanation: Under-inflated tyres create more friction with the road, increasing fuel consumption by up to ten per cent and are prone to skidding on ... or slippery surfaces. Low pressures also lead to premature wear and risk of tyre blowout or bulging.

Vehicle tyres are inflated properly (1) to ensure smooth running. (2) to allow the vehicle to take more load. (3) to avoid skidding and to minimise friction (4) to go fast and save fuel.

Description : Vehicle tyres are inflated properly (1) to ensure smooth running. (2) to allow the vehicle to take more load. (3) to avoid skidding and to minimise friction (4) to go fast and save fuel.

Last Answer : to avoid skidding and to minimise friction 

A sheet of paper can be pulled out quickly from under a glass of water without spilling the water. This phenomenon illustrates (a) lack of friction between paper and glass (b) newton’s third law of motion (c) inertia (d) acceleration

Description : A sheet of paper can be pulled out quickly from under a glass of water without spilling the water. This phenomenon illustrates (a) lack of friction between paper and glass (b) newton’s third law of motion (c) inertia (d) acceleration

Last Answer : Ans:(c)

A moving body on Earth ordinarily comes to rest by itself because of the (a) Law of inertia (b) Forces of friction (c) Conservation of momentum (d) Gravity

Description : A moving body on Earth ordinarily comes to rest by itself because of the (a) Law of inertia (b) Forces of friction (c) Conservation of momentum (d) Gravity

Last Answer : Ans:(b)

Often an unbalance of forces is produced in rotary or reciprocating machinery due to the ______ * 1 point (A) Centripetal forces (B) Centrifugal forces (C) Friction forces (D) Inertia forces

Description : Often an unbalance of forces is produced in rotary or reciprocating machinery due to the ______ * 1 point (A) Centripetal forces (B) Centrifugal forces (C) Friction forces (D) Inertia forces

Last Answer : (D) Inertia forces

Which of the following best explains why your body leans to the side when taking a sharp turn in a car? a) Friction b) Gravity c) Inertia d) None of the Above

Description : Which of the following best explains why your body leans to the side when taking a sharp turn in a car? a) Friction b) Gravity c) Inertia d) None of the Above

Last Answer : c) Inertia

Kinetic friction is always A. lesser than static friction B. greater than static friction C. equal to static friction D. equal to contact force

Description : Kinetic friction is always A. lesser than static friction B. greater than static friction C. equal to static friction D. equal to contact force

Last Answer : lesser than static friction

Pick up the correct statement from the following: (A) Catalysts are added to assist and accelerate the hardening of resin (B) The fillers are inert materials and they impart strength and hardness (C) Fibrous fillers increase thermal resistance (D) All the above

Description : Pick up the correct statement from the following: (A) Catalysts are added to assist and accelerate the hardening of resin (B) The fillers are inert materials and they impart strength and hardness (C) Fibrous fillers increase thermal resistance (D) All the above

Last Answer : Answer: Option D

Which statement is true regarding the opposing forces acting on an aeroplane in steady-state level flight? a. Thrust is greater than drag and weight and lift are equal b. These forces are equal c. Thrust is greater than drag and lift is greater than weight d. Thrust is slightly greater than lift, but the drag and weight are equal

Description : Which statement is true regarding the opposing forces acting on an aeroplane in steady-state level flight? a. Thrust is greater than drag and weight and lift are equal b. These forces are equal ... greater than weight d. Thrust is slightly greater than lift, but the drag and weight are equal

Last Answer : b. These forces are equal

The average person passes out at an acceleration of 7g (that is, seven times the gravitational acceleration on Earth). Suppose a car is designed to accelerate at this rate. How much time (in seconds) would be required for the car to accelerate from rest to 56.3 miles per hour?

Description : The average person passes out at an acceleration of 7g (that is, seven times the gravitational acceleration on Earth). Suppose a car is designed to accelerate at this rate. How much time (in seconds) would be required for the car to accelerate from rest to 56.3 miles per hour?

Last Answer : I think the Fluther policy is not to help students with their homework, but I always hate this kind of problem and it seems to me that the g is just in there to provide some background and to confuse you.

When a slingshot exerts a 10 Newton force on a rock, the rock accelerates at 50 meters per second squared. What force is required to accelerate the rock to 150 meters per second squared?

Description : When a slingshot exerts a 10 Newton force on a rock, the rock accelerates at 50 meters per second squared. What force is required to accelerate the rock to 150 meters per second squared? 

Last Answer : ANSWER: 30 NEWTONS 

While ascending a hill, the driver of the vehicle keeps the gear ratio – (1) equal to 1 (2) less than 1 (3) greater than 1 (4) either equal to or greater than 1

Description : While ascending a hill, the driver of the vehicle keeps the gear ratio – (1) equal to 1 (2) less than 1 (3) greater than 1 (4) either equal to or greater than 1

Last Answer : (4) either equal to or greater than 1 Explanation: While ascending a hill Gear Ratio should be "Either equal to or greater than 1?. Gear Ratio is the ratio between angular velocity of input gear to the angular velocity of output gear. It prevents the vehicle from stalling.

While ascending a hill, the driver of the vehicle keeps the gear ratio (1) equal to 1 (2) less than 1 (3) greater than 1 (4) either equal to or greater than 1

Description : While ascending a hill, the driver of the vehicle keeps the gear ratio (1) equal to 1 (2) less than 1 (3) greater than 1 (4) either equal to or greater than 1

Last Answer : either equal to or greater than 1

Wood is well suited to use as bearing on straw walker cranks in combine due to fact a) Wood corrosion resistance b) Split bearing are needed for practical purpose c) It can take radial as well as thrust loads d) No lubrication is required

Description : Wood is well suited to use as bearing on straw walker cranks in combine due to fact a) Wood corrosion resistance b) Split bearing are needed for practical purpose c) It can take radial as well as thrust loads d) No lubrication is required

Last Answer : b) Split bearing are needed for practical purpose

A piece of wood is held under water. The up thrust on it will be: (1) equal to the weight of the Wood (2) less than weight of the wood (3) more than weight of the wood (4) Zero

Description : A piece of wood is held under water. The up thrust on it will be: (1) equal to the weight of the Wood (2) less than weight of the wood (3) more than weight of the wood (4) Zero

Last Answer : (2) less than weight of the wood Explanation: According to the Archimedes' principle, a floating object will experience an upthrust force from water, equal to the weight of water displaced (pushed aside ... until it reaches the point where the weight of the water pushed aside equals its own weight.

If Reynolds number is greater than 1, then the (A) Viscous force is larger than the inertia force (B) Inertia force is larger than the viscous force (C) Inertia force is larger than the surface tension force (D) Inertia force is larger than the gravitational force

Description : If Reynolds number is greater than 1, then the (A) Viscous force is larger than the inertia force (B) Inertia force is larger than the viscous force (C) Inertia force is larger than the surface tension force (D) Inertia force is larger than the gravitational force

Last Answer : (B) Inertia force is larger than the viscous force

The ideal angle of banking provided on roads a.Depends on (velocity)2 of vehicle b.Depends on the nature of road surface c.Depend on coefficient of friction between the road and the vehicle cantact point d.Depends on weight of the vehicle e.All above

Description : The ideal angle of banking provided on roads a.Depends on (velocity)2 of vehicle b.Depends on the nature of road surface c.Depend on coefficient of friction between the road and the vehicle cantact point d.Depends on weight of the vehicle e.All above

Last Answer : a. Depends on (velocity)2 of vehicle

The skidding of vehicle on snow is because of very little _______. a) pull b)friction c)push d)none

Description : The skidding of vehicle on snow is because of very little _______. a) pull b)friction c)push d)none

Last Answer : b)friction

How is air resistance and friction similar?

Description : How is air resistance and friction similar?

Last Answer : Need answer

Why does a cannon recoil after firing? (1) Conservation of energy (2) Backward thrust of gases produced (3) NeMon's third law of motion (4) Newton's first law of motion

Description : Why does a cannon recoil after firing? (1) Conservation of energy (2) Backward thrust of gases produced (3) NeMon's third law of motion (4) Newton's first law of motion

Last Answer : (3) NeMon's third law of motion Explanation: Recoil is the backward momentum of a gun when it is discharged. In technical terms, the recoil caused by the gun exactly balances the forward momentum of ... 's third law. In case of canons, the momentum is transferred to the ground through its mount.

For a body floating in water, the apparent weight is equal to - (1) Actual weight of the body (2) Zero (3) Weight of the body minus weight of the liquid (4) Weight of the body plus upward thrust

Description : For a body floating in water, the apparent weight is equal to - (1) Actual weight of the body (2) Zero (3) Weight of the body minus weight of the liquid (4) Weight of the body plus upward thrust

Last Answer : (3) Weight of the body minus weight of the liquid

The dimensional formula ML⁻¹T⁻² corresponds to – (1) Modulus of elasticity (2) Viscosity (3) Moment of a force (4) Thrust

Description : The dimensional formula ML⁻¹T⁻² corresponds to – (1) Modulus of elasticity (2) Viscosity (3) Moment of a force (4) Thrust

Last Answer : (1) Modulus of elasticity Explanation: M Li- T-2 is the dimension of any quantity that is force per unit area such as Pressure or Stress, Young's Modulus, Bulk Modulus, Modulus of Rigidity, ... the ratio of the stress applied to a body or substance to the resulting strain within the elastic limit.

If there were no gravity, which of the following will not be there for a fluid? (1) Viscosity (2) Surface Tension (3) Pressure (4) Upward Thrust

Description : If there were no gravity, which of the following will not be there for a fluid? (1) Viscosity (2) Surface Tension (3) Pressure (4) Upward Thrust

Last Answer : (4) Upward Thrust Explanation: If there is no gravity, there will not be any upward thrust to keep a liquid buoyant. Whenever a body is placed in a fluid, the fluid applies resultant up ... gravity at the given place. Up thrust increases with increase in acceleration due to gravity and vice versa.

Two rods, one of copper and other of steel, experience the same up thrust when placed in water. Thus, both have – (1) equal volume (2) equal weight (3) equal density (4) equal mass

Description : Two rods, one of copper and other of steel, experience the same up thrust when placed in water. Thus, both have – (1) equal volume (2) equal weight (3) equal density (4) equal mass

Last Answer : (1) equal volume Explanation: When a body is placed in water, the upthrust or buoyant force acting on it depends upon the following factors: (1) Volume of the body submerged in the liquid - (V), or volume of ... (V); (ft) Density of the liquid - (d); and (Hi) Acceleration due to gravity In-line.

A two-stage rocket attains a velocity of 3,000 meters per second when it drops the first stage and ignites the second. It consumes 1 kilogram of fuel per second and its exhaust speed is 2,000 meters per second. What is the thrust on the spacecraft? w) 2,000 Newtons x) 3,000 Newtons y) 2,000 Newton-seconds z) 3,000 Newton-seconds

Description : A two-stage rocket attains a velocity of 3,000 meters per second when it drops the first stage and ignites the second. It consumes 1 kilogram of fuel per second and its exhaust speed is 2,000 meters per second. ... ? w) 2,000 Newtons x) 3,000 Newtons y) 2,000 Newton-seconds z) 3,000 Newton-seconds 

Last Answer : ANSWER: W -- 2,000 NEWTONS

Why does a cannon recoil after firing ? (1) Conservation of energy (2) Backward thrust of gases produced (3) Newton’s third law of motion (4) Newton’s first law of motion

Description : Why does a cannon recoil after firing ? (1) Conservation of energy (2) Backward thrust of gases produced (3) Newton’s third law of motion (4) Newton’s first law of motion

Last Answer : Newton’s third law of motion

If there were no gravity, which of the following will not be there for a fluid? (1) Viscosity (2) Surface Tension (3) Pressure (4) Upward Thrust

Description : If there were no gravity, which of the following will not be there for a fluid? (1) Viscosity (2) Surface Tension (3) Pressure (4) Upward Thrust

Last Answer : Upward Thrust

The dimensional formula ML–1T –2 corresponds to (1) Modulus of elasticity (2) Viscosity (3) Moment of a force (4) Thrust

Description : The dimensional formula ML–1T –2 corresponds to (1) Modulus of elasticity (2) Viscosity (3) Moment of a force (4) Thrust

Last Answer : Modulus of elasticity

An Athlets runs before long jump to get advantage on – (1) Inertia of motion (2) Frictional force (3) Moment of a force (4) Principle of moments

Description : An Athlets runs before long jump to get advantage on – (1) Inertia of motion (2) Frictional force (3) Moment of a force (4) Principle of moments

Last Answer : (1) Inertia of motion Explanation: An athlete does so to build up forward momentum so that when he jumps he already has a forward motion that would be greater than that of a jump made from standing in ... in terms of inertia of motion which is the tendency of an object to resist a change in motion.

An athlete runs before long jump to get advantage on (1) Inertia of motion (2) Frictional force (3) Moment of a force (4) Principle of moments

Description : An athlete runs before long jump to get advantage on (1) Inertia of motion (2) Frictional force (3) Moment of a force (4) Principle of moments

Last Answer : Inertia of motion

A 2 m long shaft rotates about one end at 20 rad/s. It begins to accelerate with ? = 10 rads/s2. After how long, in seconds, will the velocity of the free end reach 100 m/s? a.3 b.107 dynes c.5 d.6 e.7

Description : A 2 m long shaft rotates about one end at 20 rad/s. It begins to accelerate with ? = 10 rads/s2. After how long, in seconds, will the velocity of the free end reach 100 m/s? a.3 b.107 dynes c.5 d.6 e.7

Last Answer : a. 3

Scouring will occur as long as a) Frictional resistance at soil tool interface is less than the resistance at parallel soil-soil inter face b) Frictional resistance at soil tool interface is more than the resistance at parallel soil-soil inter face c) Soil-metal friction is more than angle of soil shearing resistance d) None of the above

Description : Scouring will occur as long as a) Frictional resistance at soil tool interface is less than the resistance at parallel soil-soil inter face b) Frictional resistance at soil tool interface is more than ... c) Soil-metal friction is more than angle of soil shearing resistance d) None of the above

Last Answer : a) Frictional resistance at soil tool interface is less than the resistance at parallel soil-soil inter face

The true power indicated by a wattmeter depends on the current flow through the load, the magnitude of the potential across the load, and the _____________. A. power factor of the load B. angle of coil displacement C. inertia of the movable coil D. high resistance from the load

Description : The true power indicated by a wattmeter depends on the current flow through the load, the magnitude of the potential across the load, and the _____________. A. power factor of the load B. angle of coil displacement C. inertia of the movable coil D. high resistance from the load

Last Answer : Answer: A

The true power indicated by the pointer movement of a wattmeter depends on the current flow through the load, the magnitude of the potential across the load, and the ____________. A. power factor of the load B. angle of coil displacement C. inertia of the movable coil D. high resistance from the load

Description : The true power indicated by the pointer movement of a wattmeter depends on the current flow through the load, the magnitude of the potential across the load, and the ____________. A. power factor of the ... B. angle of coil displacement C. inertia of the movable coil D. high resistance from the load

Last Answer : Answer: A

Pick up the incorrect statement from the following: The torsional resistance of a shaft is directly proportional to (A) Modulus of rigidity (B) Angle of twist (C) Reciprocal of the length of the shaft (D) Moment of inertia of the shaft section

Description : Pick up the incorrect statement from the following: The torsional resistance of a shaft is directly  proportional to  (A) Modulus of rigidity  (B) Angle of twist  (C) Reciprocal of the length of the shaft  (D) Moment of inertia of the shaft section 

Last Answer : (D) Moment of inertia of the shaft section 

What is the product of sectional modulus and allowable bending stress called as? a. Moment of inertia b. Moment of rigidity c. Moment of resistance d. Radius of gyration

Description : What is the product of sectional modulus and allowable bending stress called as? a. Moment of inertia b. Moment of rigidity c. Moment of resistance d. Radius of gyration

Last Answer : c. Moment of resistance

If air gap readings for an electical generating machine have changed significantly from the last reading, you should check _________. A. the bearings B. insulation readings and machine cleanliness C. the prime mover thrust bearing D. the field coil bolts for the proper torque values

Description : If air gap readings for an electical generating machine have changed significantly from the last reading, you should check _________. A. the bearings B. insulation readings and machine cleanliness C. the prime mover thrust bearing D. the field coil bolts for the proper torque values

Last Answer : Answer: A

As shown in the illustration, when the 'speed control' system is in 'SPLIT' _______________. EL-0096 A. Relays #1, #5 and #8 are not used B. the 'slew rated controller' is grounded through Relay #6 C. the RPM 'function generator' and 'thrust levers' have no control D. the 'E/P converters' are bypassed and air is fed directly to the governors via the 'load sharing valve'

Description : As shown in the illustration, when the 'speed control' system is in 'SPLIT' _______________. EL-0096 A. Relays #1, #5 and #8 are not used B. the 'slew rated controller' is grounded through Relay ... E/P converters' are bypassed and air is fed directly to the governors via the 'load sharing valve'

Last Answer : Answer: C

The main thrust of ‘Copenhegen Summit’ was: a) Food Security b) Air Pollution c) Rehabilitation d) Climate Change

Description : The main thrust of ‘Copenhegen Summit’ was: a) Food Security b) Air Pollution c) Rehabilitation d) Climate Change

Last Answer : d) Climate Change

Rain drops falling through atmospheric air attain limited terminal velocity, because of (A) Upward thrust due to air (B) Viscous force exerted by air (C) Surface tension effects of water (D) Force of gravity

Description : Rain drops falling through atmospheric air attain limited terminal velocity, because of (A) Upward thrust due to air (B) Viscous force exerted by air (C) Surface tension effects of water (D) Force of gravity

Last Answer : Option B

It is the unbalanced force developed in a turbo jet engine that is caused by the difference in the momentum of the low-velocity air entering the engine and the high velocity exhaust gases leaving the engine.  a. Fall  b. Lift  c. Drag  d. Thrust

Description : It is the unbalanced force developed in a turbo jet engine that is caused by the difference in the momentum of the low-velocity air entering the engine and the high velocity exhaust gases leaving the engine.  a. Fall  b. Lift  c. Drag  d. Thrust

Last Answer : Thrust

Static friction is always a.greater than the dynamic driction b.either greater or more than the dynamic friction c.less than the dynamic friction d.107 dynes e.equal to the dynamic friction

Description : Static friction is always a.greater than the dynamic driction b.either greater or more than the dynamic friction c.less than the dynamic friction d.107 dynes e.equal to the dynamic friction

Last Answer : a. greater than the dynamic driction