Kinetic friction is always A. lesser than static friction B. greater than static friction C. equal to static friction D. equal to contact force

Kinetic friction is always

A. lesser than static friction

B. greater than static friction

C. equal to static friction

D. equal to contact force
by

1 Answer

Answer :

lesser than static friction


by

Related questions

Which one of the following is not the law of dry friction? a.If friction is neglected, the reactions are always normal to the surfaces on contact b.Friction always acts to oppose the relative motion of the free body c.If static friction is acting, the value of the friction force may vary from zero to its maximum value d.The force of friction is always normal to the surface e.All of the above

Description : Which one of the following is not the law of dry friction? a.If friction is neglected, the reactions are always normal to the surfaces on contact b.Friction always acts to oppose the relative motion of ... its maximum value d.The force of friction is always normal to the surface e.All of the above

Last Answer : d. The force of friction is always normal to the surface

Static friction is always a.greater than the dynamic driction b.either greater or more than the dynamic friction c.less than the dynamic friction d.107 dynes e.equal to the dynamic friction

Description : Static friction is always a.greater than the dynamic driction b.either greater or more than the dynamic friction c.less than the dynamic friction d.107 dynes e.equal to the dynamic friction

Last Answer : a. greater than the dynamic driction

The function of ball bearings in a wheel is – (1) to increase friction (2) to convert kinetic friction into rolling friction (3) to convert static friction into kinetic friction (4) just for convenience

Description : The function of ball bearings in a wheel is – (1) to increase friction (2) to convert kinetic friction into rolling friction (3) to convert static friction into kinetic friction (4) just for convenience

Last Answer : (2) to convert kinetic friction into rolling friction Explanation: A ball bearing is a type of rollingelement bearing that uses balls to maintain the separation between the bearing races. The purpose of a ball bearing is to reduce rotational friction and support radial and axial loads.

The function of ball bearings in a wheel is : (1) to increase friction (2) to convert kinetic friction into rolling friction (3) to convert static friction into kinetic friction (4) just for convenience

Description : The function of ball bearings in a wheel is : (1) to increase friction (2) to convert kinetic friction into rolling friction (3) to convert static friction into kinetic friction (4) just for convenience

Last Answer : to convert kinetic friction into rolling friction

Self-locking takes place when a) Coefficient of friction is equal to or greater than the tangent of the helix angle b) Coefficient of friction is lesser than or equal to the tangent of the helix angle c) Coefficient of friction is equal to or greater than the tangent of the helix angle d) None of the mentioned

Description : Self-locking takes place when a) Coefficient of friction is equal to or greater than the tangent of the helix angle b) Coefficient of friction is lesser than or equal to the tangent of the helix ... friction is equal to or greater than the tangent of the helix angle d) None of the mentioned

Last Answer : c) Coefficient of friction is equal to or greater than the tangent of the helix angle

What is friction? Define coefficient of static friction and coefficient of kinetic friction.

Description : What is friction? Define coefficient of static friction and coefficient of kinetic friction.

Last Answer : What is friction? Define coefficient of static friction and coefficient of kinetic friction. Give the necessary formula for each.

What is kinetic friction and static friction?

Description : What is kinetic friction and static friction?

Last Answer : Friction is the resistance to movement of an object pressing/resting/moving on a surface. It's not intuitively obvious but the standing still friction and moving friction are different. Assume you have a ... than the force required to keep it moving (kinetic friction) after it has begun to move.

Friction can be reduced by changing over from _____. A. Sliding to rolling B. Dynamic to static C. Potential energy to kinetic energy D. Rolling to sliding

Description : Friction can be reduced by changing over from _____. A. Sliding to rolling B. Dynamic to static C. Potential energy to kinetic energy D. Rolling to sliding

Last Answer : ANSWER: A

A block of wood initially at rest slides down an inclined plane. Neglecting friction, the kinetic energy of the block at the bottom of the plane is: w) all converted into heat x) equal to its potential energy (with respect to the bottom of the plane) when it was at the top of the plane y) less than its kinetic energy at the top of the plane z) dependant on the materials of which the block is made

Description : A block of wood initially at rest slides down an inclined plane. Neglecting friction, the kinetic energy of the block at the bottom of the plane is: w) all converted into heat x) equal to its ... kinetic energy at the top of the plane z) dependant on the materials of which the block is made 

Last Answer : ANSWER: X -- EQUAL TO ITS POTENTIAL ENERGY (WITH RESPECT TO THE BOTTOM OF PLANE) WHEN IT WAS AT THE TOP OF THE PLANE.

Torricelli's theorem states that the velocity ‘v’ of the liquid emerging from the bottom of the wide tank is given by √(2gh). In practice, this velocity is: A. equal to √(2gh) B. greater than √(2gh) C. lesser than √(2ghD. independent of height and gravitational field strength)

Description : Torricelli's theorem states that the velocity ‘v’ of the liquid emerging from the bottom of the wide tank is given by √(2gh). In practice, this velocity is: A. equal to √(2gh) B. greater than √(2gh) C. lesser than √(2gh) D. independent of height and gravitational field strength

Last Answer :  lesser than √(2gh

When compared with the co-latitude of the place of observation, the declination of a circumpolar star is always, (a) Lesser (b) Greater (c) Equal (d) Either lesser or equal

Description : When compared with the co-latitude of the place of observation, the declination of a circumpolar star is always, (a) Lesser (b) Greater (c) Equal (d) Either lesser or equal

Last Answer : (b) Greater

Incorrect statement for co-efficient of friction could be that A. The coefficient of friction is denoted by the Greek letter µ. B. The coefficient of friction is directly proportional to the force of friction C. The coefficient of friction is constant even in the conditions of fast slipping and high contact pressure D. The coefficient of friction is inversely proportional to the force pressing the surfaces together

Description : Incorrect statement for co-efficient of friction could be that A. The coefficient of friction is denoted by the Greek letter µ. B. The coefficient of friction is directly proportional to ... D. The coefficient of friction is inversely proportional to the force pressing the surfaces together

Last Answer : The coefficient of friction is constant even in the conditions of fast slipping and high contact pressure

The relationship between kinetic energy and the potential energy of a swinging pendulum bob is one of the following. Is it: w) kinetic energy is greater than potential energy x) kinetic energy is less than potential energy y) kinetic energy is equal to potential energy z) kinetic energy plus potential energy equals a constant

Description : The relationship between kinetic energy and the potential energy of a swinging pendulum bob is one of the following. Is it: w) kinetic energy is greater than potential energy x) kinetic ... kinetic energy is equal to potential energy z) kinetic energy plus potential energy equals a constant  

Last Answer : ANSWER: Z -- KINETIC ENERGY PLUS POTENTIAL ENERGY EQUALS A CONSTANT 

A car and lorry are both moving with equal kinetic energy. If equal breaking force is applied on both, then before coming to rest the (a) Car will cover a greater distance (b) Lorry will cover a greater distance (c) Both will cover the same distance (d) The distance covered by them will depend only on their respective velocities

Description : A car and lorry are both moving with equal kinetic energy. If equal breaking force is applied on both, then before coming to rest the (a) Car will cover a greater distance (b) Lorry ... will cover the same distance (d) The distance covered by them will depend only on their respective velocities

Last Answer : Ans:(c)

Kinetic friction is a.Maximum value of frictional force when a body is about to move b.Friction between two well lubricated bodies c.Friction force acting when the body is in motion d.Driction force which keeps a body in motion e.None of the above

Description : Kinetic friction is a.Maximum value of frictional force when a body is about to move b.Friction between two well lubricated bodies c.Friction force acting when the body is in motion d.Driction force which keeps a body in motion e.None of the above

Last Answer : c. Friction force acting when the body is in motion

The maximum frictional force which comes into play when a body just begins to slide over the surface of another body is known as a.Kinetic friction b.Rolling friction c.Dynamic friction d.Limiting friction e.Sliding friction

Description : The maximum frictional force which comes into play when a body just begins to slide over the surface of another body is known as a.Kinetic friction b.Rolling friction c.Dynamic friction d.Limiting friction e.Sliding friction

Last Answer : d. Limiting friction

What would cause the force of kinetic friction to increase?

Description : What would cause the force of kinetic friction to increase?

Last Answer : an increase in uk (apex)

Kinetic friction is the (A) Tangent of angle between normal reaction and the resultant of normal reaction and the limiting friction (B) Ratio of limiting friction and normal reaction (C) The friction force acting when the body is just about to move (D) The friction force acting when the body is in motion

Description : Kinetic friction is the (A) Tangent of angle between normal reaction and the resultant of normal reaction and the limiting friction (B) Ratio of limiting friction and normal reaction (C) The friction force ... body is just about to move (D) The friction force acting when the body is in motion

Last Answer : (D) The friction force acting when the body is in motion

Ice skating is possible and practical because of a unique property of water. Is it because: w) The coefficient of kinetic friction of steel on frozen water decreases with decreasing temperature x) Ice readily sublimes y) The melting point decreases with increasing pressure z) Ice is a good thermal insulator

Description : Ice skating is possible and practical because of a unique property of water. Is it because: w) The coefficient of kinetic friction of steel on frozen water decreases with decreasing temperature x ... sublimes y) The melting point decreases with increasing pressure z) Ice is a good thermal insulator 

Last Answer : ANSWER: Y -- THE MELTING POINT DECREASES WITH INCREASING PRESSURE 

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Proportional to the coefficient of static friction b.Proportional to the coefficient of dynamic friction c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Last Answer : c. Indeterminate

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Indeterminate b.Proportional to the coefficient of dynamic friction c.Determinate but depends on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Last Answer : c. Determinate but depends on the acceleration of the cylinder

Why force of static friction is known as ‘self-adjusting force?

Description : Why force of static friction is known as ‘self-adjusting force?

Last Answer : Why force of static friction is known as ‘self-adjusting force?

The work done by a friction force is: w) always positive x) always negative y) always zero z) either positive or negative depending upon the situation.

Description : The work done by a friction force is: w) always positive x) always negative y) always zero z) either positive or negative depending upon the situation. 

Last Answer : ANSWER: X -- ALWAYS NEGATIVE

Temperature rise in partial bearing is ____ than full bearing. a) Lesser b) Greater c) Equal

Description : Temperature rise in partial bearing is ____ than full bearing. a) Lesser b) Greater c) Equal

Last Answer : a) Lesser

Coarse threads have helix angle _____ fine threads. a) Equal to b) Greater than c) Lesser than d) There is no relation

Description : Coarse threads have helix angle _____ fine threads. a) Equal to b) Greater than c) Lesser than d) There is no relation

Last Answer : c) Lesser than

The shock absorbing capacity of bolt can be increased by making the shank diameter ________ the root diameter. a) Lesser than b) Equal to c) Greater than d) No effect

Description : The shock absorbing capacity of bolt can be increased by making the shank diameter ________ the root diameter. a) Lesser than b) Equal to c) Greater than d) No effect

Last Answer : b) Equal to

With internationalization, after a point, the costs of organization complexity may be.........the benefits of internationlization? A. Equal B. Lesser than C. Greater than D. Not comparable to

Description : With internationalization, after a point, the costs of organization complexity may be.........the benefits of internationlization? A. Equal B. Lesser than C. Greater than D. Not comparable to

Last Answer : Greater than

The amount of phagocytosis done by the Plasmodium A-.is greater than by the water mold mycelium B- is lesser than by the water mold mycelium C- .is equal to by the water mold mycelium D-.none of the above

Description : The amount of phagocytosis done by the Plasmodium A-.is greater than by the water mold mycelium B- is lesser than by the water mold mycelium C- .is equal to by the water mold mycelium D-.none of the above

Last Answer : is greater than by the water mold mycelium

The number of sets of chromosomes in a dikaryotic cell A- is greater than diploid cell B- is lesser than diploid cell C- .is equal to diploid cell D- none of these

Description : The number of sets of chromosomes in a dikaryotic cell A- is greater than diploid cell B- is lesser than diploid cell C- .is equal to diploid cell D- none of these

Last Answer : .is equal to diploid cell

Tension on slack side in case of chain drive a) Lesser than on tight side b) Greater than on tight side c) Zero d) Equal to that on tight side

Description : Tension on slack side in case of chain drive a) Lesser than on tight side b) Greater than on tight side c) Zero d) Equal to that on tight side

Last Answer : c) Zero

In case of a pipe exit fitted with a nozzle, the (A) Conversion of kinetic head to pressure head is facilitated (B) Conversion of pressure head to kinetic head is facilitated (C) Power transmitted through the nozzle is maximum, when the head lost due to friction in the pipe is equal to one third of the total supply head (D) Both (B) and (C)

Description : In case of a pipe exit fitted with a nozzle, the (A) Conversion of kinetic head to pressure head is facilitated (B) Conversion of pressure head to kinetic head is facilitated (C) Power transmitted through the nozzle ... in the pipe is equal to one third of the total supply head (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Tangent of angle of friction is equal to (A) Kinetic friction (B) Limiting friction (C) Angle of repose (D) Coefficient of friction

Description : Tangent of angle of friction is equal to (A) Kinetic friction (B) Limiting friction (C) Angle of repose (D) Coefficient of friction

Last Answer : (D) Coefficient of friction

What is Static Friction ?

Description : What is Static Friction ?

Last Answer : The friction that occurs between two surfaces when one is not moving relative to the other is called positional friction.

`alpha`-rays have ionization power because they possess a. Lesser kinetic energy b. Higher kinetic energy c. Lesser penetration power d. Higher penetr

Description : `alpha`-rays have ionization power because they possess a. Lesser kinetic energy b. Higher kinetic energy c. Lesser penetration power d. Higher penetr

Last Answer : `alpha`-rays have ionization power because they possess a. Lesser kinetic energy b. Higher ... . lesser penetration power D. higher penetration power

While compared with singly reinforced beams, the depth of doubly reinforced beam is [ A ] Greater [ B ] Lesser [ C ] almost equal [ D ] twice

Description : While compared with singly reinforced beams, the depth of doubly reinforced beam is [ A ] Greater [ B ] Lesser [ C ] almost equal [ D ] twice

Last Answer : [ B ] Lesser

When compared to ordinary Portland cement, Rapid hardening Portland cement contains ______________ amount of lime content [ A ] Equal [ B ] Greater [ C ] Lesser [ D ] Zero

Description : When compared to ordinary Portland cement, Rapid hardening Portland cement contains ______________ amount of lime content [ A ] Equal [ B ] Greater [ C ] Lesser [ D ] Zero

Last Answer : [ B ] Greater

Liquid delivery by centrifugal pump starts, only when the head developed by it is equal to the __________ head. (A) Manometric (B) Total (C) Static (D) Friction

Description : Liquid delivery by centrifugal pump starts, only when the head developed by it is equal to the __________ head. (A) Manometric (B) Total (C) Static (D) Friction

Last Answer : (A) Manometric

Pick up wrong statement about friction force for dry surfaces. Friction force is (A) Proportional to normal load between the surfaces (B) Dependent on the materials of contact surface (C) Proportional to velocity of sliding (D) Independent of the area of contact surfaces

Description : Pick up wrong statement about friction force for dry surfaces. Friction force is  (A) Proportional to normal load between the surfaces  (B) Dependent on the materials of contact surface  (C) Proportional to velocity of sliding  (D) Independent of the area of contact surfaces 

Last Answer : (C) Proportional to velocity of sliding 

________ is a substance that can reduce the force of friction between the two surface in contact. a) lubricant b)paste c)water d)push

Description : ________ is a substance that can reduce the force of friction between the two surface in contact. a) lubricant b)paste c)water d)push

Last Answer : a) lubricant

Contact force always acts at A. acute angles to the surface producing it B. right angles to the surface producing it C. obtuse angle to the surface producing it D. parallel to the surface producing it

Description : Contact force always acts at A. acute angles to the surface producing it B. right angles to the surface producing it C. obtuse angle to the surface producing it D. parallel to the surface producing it

Last Answer : right angles to the surface producing it

Vehicle will accelerate as long as A. air resistance is greater than thrust B. air resistance is greater than inertia C. thrust is greater than air resistance and friction D. friction is greater than thrust

Description : Vehicle will accelerate as long as A. air resistance is greater than thrust B. air resistance is greater than inertia C. thrust is greater than air resistance and friction D. friction is greater than thrust

Last Answer : thrust is greater than air resistance and friction

Two objects A and B are moving with same momentum. Mass of object 'B' is greater then mass of object 'A'. Which of the two object will have higher kinetic energy? -Physics

Description : Two objects A and B are moving with same momentum. Mass of object 'B' is greater then mass of object 'A'. Which of the two object will have higher kinetic energy? -Physics

Last Answer : Let m1​ and m2​ be the masses of the body Let m1​>m2​Given that m1​v1​=m2​v2​v2​v1​​=m1​m2​​∴ Ratio between their kinetic energies , =K2​K1​​=21​m2​v22​21​m1​v12​​⟹K2​K1​​=m2​m1​​×m12​

If two bodies one light and one heavy have equal kinetic energies, which one has a greater momentum? a.Momentum depends on velocities b.Heavy body c.Both have equal momentum d.Nothing can be concluded on the basis of information provided e.Light body

Description : If two bodies one light and one heavy have equal kinetic energies, which one has a greater momentum? a.Momentum depends on velocities b.Heavy body c.Both have equal momentum d.Nothing can be concluded on the basis of information provided e.Light body

Last Answer : b. Heavy body

A particle is acted upon by a force of constant magnitude which is always perpendicular to the velocity of the particle. The motion of the particle takes place in a plane. It follows that (a) Its velocity is constant (b) Its acceleration is constant (c) Its kinetic energy is constant (d) It moves in a circular path

Description : A particle is acted upon by a force of constant magnitude which is always perpendicular to the velocity of the particle. The motion of the particle takes place in a plane. It follows that (a) Its ... ) Its acceleration is constant (c) Its kinetic energy is constant (d) It moves in a circular path

Last Answer : Ans:(d)

For a person having hypermetropia, the near point is ______. (1) Greater than 20cm (2) Lesser than 25cm (3) Greater than 25cm (4) Lesser than 30cm

Description : For a person having hypermetropia, the near point is ______. (1) Greater than 20cm (2) Lesser than 25cm (3) Greater than 25cm (4) Lesser than 30cm

Last Answer : (3) Greater than 25cm Explanation: The near point of a person suffering from hypermetropia is 75 cm. calculate. The near point of a person suffering from hypermetropia is 75 cm. Calculate the focal length ... lens required to enable him to read the newspaper which is kept at 25 cm from the eye.

Global economies of scale arise when: a) a product or a process can be globally performed using cheap labour. b) a product or a process can be performed more cheaply thanks to alliances with multinational firms in other sectors. c) a product or a process can be performed more cheaply at greater volume than at lesser volume. d) a product or a process can be performed more cheaply thanks to globally performed cross-business cost-saving activities.

Description : Global economies of scale arise when: a) a product or a process can be globally performed using cheap labour. b) a product or a process can be performed more cheaply thanks to alliances ... a process can be performed more cheaply thanks to globally performed cross-business cost-saving activities.

Last Answer : a product or a process can be performed more cheaply at greater volume than at lesser volume.

Pick up the correct statement from the following: (A) Higher the gauge, more deficient will be the rain catch (B) Heavier the rain, lesser will be the rain catch (C) The trees serving as wind brakes in the vicinity of the gauge, should not subtend angles greater than 45° (D) All the above

Description : Pick up the correct statement from the following: (A) Higher the gauge, more deficient will be the rain catch (B) Heavier the rain, lesser will be the rain catch (C) The trees serving as wind brakes in the vicinity of the gauge, should not subtend angles greater than 45° (D) All the above

Last Answer : Answer: Option D

A thick liquid like syrup has a __________ viscosity than a light liquid like water. (A) Lesser (B) Greater (C) Same (D) None of these

Description : A thick liquid like syrup has a __________ viscosity than a light liquid like water. (A) Lesser (B) Greater (C) Same (D) None of these

Last Answer : Answer: Option B

Spiral gear are used for transmitting power between two shaft Inclined at a. Right angle to each other and axes can intersect b. Right angle to each other and axes cannot intersect c. At angle slightly lesser or greater than 90 of axles can meet d. None of the above

Description : Spiral gear are used for transmitting power between two shaft Inclined at a. Right angle to each other and axes can intersect b. Right angle to each other and axes cannot intersect c. At angle slightly lesser or greater than 90 of axles can meet d. None of the above

Last Answer : c. At angle slightly lesser or greater than 90 of axles can meet