Classify each of the following as being either a p-type or an n-type Semiconductor.

Classify each of the following as being either a p-type or an n-type Semiconductor.
by

1 Answer

Answer :

(a) Ge dopped with In----p-type.

(b) B dopped with Si----n-type.
by

Related questions

A semiconductor formed by addition of trivalent impurity is : a) P–Type b) N–Type c) Q–type d) M–Type

Description : A semiconductor formed by addition of trivalent impurity is : a) P–Type b) N–Type c) Q–type d) M–Type

Last Answer : d) M–Type

Hall effect may be used for which of the following? (A) determining whether the semiconductor is p or n type. (B) determining the carrier concentration. (C) calculating the mobility. (D) All the above.

Description : Hall effect may be used for which of the following? (A) determining whether the semiconductor is p or n type. (B) determining the carrier concentration. (C) calculating the mobility. (D) All the above.

Last Answer : (D) All the above. Ans: D Determining whether the semiconductor is p or n type, determining the carrier concentration, calculating the mobility

State the impurities for obtaining p-type and n-type semiconductor from intrinsic semi conductor.

Description : State the impurities for obtaining p-type and n-type semiconductor from intrinsic semi conductor. 

Last Answer : Crystals of Silicon and Germanium are doped using two types of dopants:  1. The impurities for obtaining n-type semiconductor from intrinsic semiconductor are pentavalent impurity; like Arsenic (As), Antimony ... semiconductor are trivalent impurity; like Indium (In), Boron (B), Aluminum (Al), etc.

Distinguish between P-type and N-type semiconductor.

Description : Distinguish between P-type and N-type semiconductor. 

Last Answer : N- type Semiconductor P- type Semiconductor When small amount of pentavalent impurity is added to a pure semiconductor is called N-type semiconductor When small amount of trivalent impurity ... of electrons The electrons are majority carriers The holes are majority carriers

NMOS stands for: a. N-channel metal-oxide-semiconductor b. P-channel metal-oxide-semiconductor c. N-channel memory-oxide-semiconductor d. All the above

Description : NMOS stands for: a. N-channel metal-oxide-semiconductor b. P-channel metal-oxide-semiconductor c. N-channel memory-oxide-semiconductor d. All the above

Last Answer : a. N-channel metal-oxide-semiconductor

In a semiconductor diode, p-side is earthed and to n-side is applied a potential of -2 volt; the diode shall (a) Conduct (b) Not conduct (c) Conduct partially (d) Break down

Description : In a semiconductor diode, p-side is earthed and to n-side is applied a potential of -2 volt; the diode shall (a) Conduct (b) Not conduct (c) Conduct partially (d) Break down

Last Answer : a) Conduct

A semiconductor device made up of a single p-n Junction is called a: w) transistor x) diode y) Fet z) integrated circuit

Description : A semiconductor device made up of a single p-n Junction is called a: w) transistor x) diode y) Fet z) integrated circuit

Last Answer : ANSWER: X -- DIODE

When a semiconductor is doped with a P-type impurity, each impurity atom will (A) acquire negative charge. (B) acquire positive charge. (C) remain electrically neutral. (D) give away one electron.

Description : When a semiconductor is doped with a P-type impurity, each impurity atom will (A) acquire negative charge. (B) acquire positive charge. (C) remain electrically neutral. (D) give away one electron.

Last Answer : (A) acquire negative charge.

In a p-type semiconductor, Which are the majority charge carriers? -Do You Know?

Description : In a p-type semiconductor, Which are the majority charge carriers? -Do You Know?

Last Answer : answer:

Explain the formation of a p-type semiconductor.

Description : Explain the formation of a p-type semiconductor.

Last Answer : When a small amount of a trivalent impurity like Boron, Indium, Aluminium or Gallium is added to a tetra valant element like Silicon or Germanium, three electrons of each impurity atoms ... and becomes n-type semiconductor. In an ntype semiconductor the majority charge carriers are holes.

What are the majority carriers in a P-type semiconductor?

Description : What are the majority carriers in a P-type semiconductor?

Last Answer : Holes.

In a P-type semiconductor the charge carriers are a) Electrons b) Holes c) Protons d) Neutrons

Description : In a P-type semiconductor the charge carriers are a) Electrons b) Holes c) Protons d) Neutrons

Last Answer : b) Holes

In p-type semiconductor the majority carriers are (A) holes. (B) electrons. (C) positive ions. (D) negative ions.

Description : In p-type semiconductor the majority carriers are (A) holes. (B) electrons. (C) positive ions. (D) negative ions.

Last Answer : (A) holes.

A P-type semiconductor is doped to produce one of the following. Will it produce: w) both holes and electrons x) positive electrons y) negative electrons z) holes

Description : A P-type semiconductor is doped to produce one of the following. Will it produce: w) both holes and electrons x) positive electrons y) negative electrons z) holes

Last Answer : ANSWER: Z -- HOLES

Explain the p-type semiconductor.

Description : Explain the p-type semiconductor.  

Last Answer : 1) Trivalent impurity is added to a pure semiconductor it is called P-type semiconductor. 2) Some trivalent impurities are gallium , indium ,boron, aluminium etc. These impurities provide large ... )So they are called as majority carriers and electrons are called minority charge carriers.

Impurity atoms to be added to pure silicon in order to make a p-type semiconductor belongs to

Description : Impurity atoms to be added to pure silicon in order to make a p-type semiconductor belongs to (a) Phosphorous (b) Boron (c) Antimony (d) Aluminium 

Last Answer : Boron  , a  group  three  element.

In a P type semiconductor

Last Answer : In a P type semiconductor At room temperature the hole concentration equals the acceptor concentration

Fill in the blanks with the appropriate option. Humanity is the __________ of a particular human being, but each individual has characteristics which __________ him from other persons. (a) Vagueness, Classify (b) Enigma, declassify (c) Progression, Isolate (d) Essence, Distinguish

Description : Fill in the blanks with the appropriate option. Humanity is the __________ of a particular human being, but each individual has characteristics which __________ him from other persons. (a) Vagueness, Classify (b) Enigma, declassify (c) Progression, Isolate (d) Essence, Distinguish

Last Answer : Ans: d) Essence…Distinguish 

What is n- type semiconductor ?

Description : What is n- type semiconductor ?

Last Answer : When a semiconductor substance is mixed with a five-component element as an adulterant or a waste, the negative charge carrier electron in them acts as the maximum charge carrier. Such semiconductors are called n- type semiconductors.

Explain the formation of an n-type semiconductor.

Description : Explain the formation of an n-type semiconductor.

Last Answer : When a small amount of a penta valant impurity like antimony, arsenic or phosphorous is added to a tetra valant element like Silicon or Germanium, four out of five electrons of each impurity ... becomes an n-type semiconductor. In an n-type semiconductor the majority charge carriers are electrons.

What type of PN diode is formed by using a fine metal wire and a section of N-type semiconductor material?

Description : What type of PN diode is formed by using a fine metal wire and a section of N-type semiconductor material?

Last Answer : Point-contact.

What are the majority carriers in an N-type semiconductor?

Description : What are the majority carriers in an N-type semiconductor?

Last Answer : Electrons.

In the N-type semiconductor the charge carries are a) Holes b) Neutrons c) Protons d) Electrons

Description : In the N-type semiconductor the charge carries are a) Holes b) Neutrons c) Protons d) Electrons

Last Answer : d) Electrons

n-type semiconductor is an example of (A) extrinsic semiconductor. (B) intrinsic semiconductor. (C) super conductor. (D) insulators..

Description : n-type semiconductor is an example of (A) extrinsic semiconductor. (B) intrinsic semiconductor. (C) super conductor. (D) insulators..

Last Answer : (A) extrinsic semiconductor.

In an n-type semiconductor, as the donor concentration ND increases, the Fermi level EF:

Description : In an n-type semiconductor, as the donor concentration ND increases, the Fermi level EF: (1) Remains unaltered (2) Moves towards the conduction band (3) Move towards the center of forbidden energy gap (4) May or may not move depending on temperature 

Last Answer : In an n-type semiconductor, as the donor concentration ND increases, the Fermi level EF: Moves towards the conduction band

The material used for ‘doping’ to prepare N - type semiconductor is

Description : The material used for ‘doping’ to prepare N - type semiconductor is

Last Answer : The material used for ‘doping’ to prepare N - type semiconductor is Arsenic

n-type semiconductor can be made by adding ____ to intrinsic semiconductor

Description : n-type semiconductor can be made by adding ____ to intrinsic semiconductor (A) Boron (B) Arsenic (C) Carbon (D) Germanium

Last Answer : n-type semiconductor can be made by adding Arsenic to intrinsic semiconductor

Majority carriers in n type semiconductor are_______.

Description : Majority carriers in n type semiconductor are_______. A. Electrons B. Holes C. Both D. None

Last Answer : Majority carriers in n type semiconductor are Electrons.

An n-type semiconductor is ………

Last Answer : An n-type semiconductor is Electrically neutral.

C and Si both have same lattice structure, having 4 bonding electrons in each. However, C is insulator where as Si is intrinsic semiconductor. This is because (1) The four bonding electrons in the case of C lie in the third orbit, whereas for Si they lie in the fourth orbit (2) In case of C the valance band is not completely filled at absolute zero temperature (3) In case of C the conduction band is partly filled even at absolute zero temperature (4) The four bonding electrons in the case of C lie in the second orbit, whereas in the case of Si they lie in the third

Description : C and Si both have same lattice structure, having 4 bonding electrons in each. However, C is insulator where as Si is intrinsic semiconductor. This is because (1) The four bonding electrons in the case of C ... the case of C lie in the second orbit, whereas in the case of Si they lie in the third

Last Answer : (4) The four bonding electrons in the case of C lie in the second orbit, whereas in the case of Si they lie in the third

PMOS stands for: a. P-channel metal-oxide-semiconductor b. P-channel memory –oxide-semiconductor c. Both A and B d. None of these

Description : PMOS stands for: a. P-channel metal-oxide-semiconductor b. P-channel memory –oxide-semiconductor c. Both A and B d. None of these

Last Answer : a. P-channel metal-oxide-semiconductor

What does the letter "N" indicate in the semiconductor identification system?

Description : What does the letter "N" indicate in the semiconductor identification system?

Last Answer : A semiconductor.

Classify condensers used in thermal power station. Explain each type in brief.

Description : Classify condensers used in thermal power station. Explain each type in brief. 

Last Answer : Types of condenser: Classification: 1. Jet Condenser (Mixing Type) 2. Surface condenser (non Mixing type)  Explanation:-   1. Jet Condenser (Mixing Type) In Jet condenser the steam ... there in no direct contact between the steam and cooling water. This condensate is reused in boiler. 

Classify the insulating materials as per operating temperature. Give two examples of each type.

Description : Classify the insulating materials as per operating temperature. Give two examples of each type.

Last Answer : Sr.No.  Insulation Classes  Maximum permissible temperature (0C) Insulating Material 1 Class-Y or O  900 Cotton, silk, paper, press board, wood, cellulose-, PVC, VIR. (Cotton, silk, ... adhesive coating.  7 Class- C  Over 1800 Porcelain, ceramics, glass, quartz. 

From each set, choose the element with largest ionization enthalpy and explain your answer. (a) F, O, N (b) Mg, P, Ar (c) B, Al, Ga

Description : From each set, choose the element with largest ionization enthalpy and explain your answer. (a) F, O, N (b) Mg, P, Ar (c) B, Al, Ga

Last Answer : Ans. (a). The element fluorine F has the largest ionization enthalpy because in general, it increases along the period. These elements belong to the second period in the order is: N, O, F. Therefore, ... the order of B, Al, Ga. Therefore, the first element B is expected to have the largest value.

Suppose you are given a binary tree with n nodes, such that each node has exactly either zero or two children. The maximum height of the tree will be (A) n/2 - 1 (B) n/2 + 1 (C) (n-1)/2 (D) (n+1)/2

Description : Suppose you are given a binary tree with n nodes, such that each node has exactly either zero or two children. The maximum height of the tree will be (A) n/2 - 1 (B) n/2 + 1 (C) (n-1)/2 (D) (n+1)/2

Last Answer : (C) (n-1)/2

Give reason: Carbon is not a semiconductor inspite of it’s group being 14.

Description : Give reason: Carbon is not a semiconductor inspite of it’s group being 14.

Last Answer : Conductivity increases as you go down a group, so carbon, at the top of its group, is usually described as a resistor and silicon and germanium are described as semi- conductors. Continuing down the group, tin and lead are conductors

Classify industries on the basis of the nature of products Give one example of each. -Geography

Description : Classify industries on the basis of the nature of products Give one example of each. -Geography

Last Answer : On the basis of the nature of products, industries can be divided into two categories : 1. Heavy Industry: Use heavy and bulky raw material as iron ore and coal etc. Example : Iron ... . 2. Light Industry: Use light raw material. Example: . Pharmaceutical industry, chemical industry etc.

Classify minerals into two groups on the basis of chemical and physical properties and give one example of minerals of each group. -Geography

Description : Classify minerals into two groups on the basis of chemical and physical properties and give one example of minerals of each group. -Geography

Last Answer : Minerals are classified on the basis of their physical properties and chemical properties such as: Metallic Minerals Metallic minerals are those that are rich in metals and a source to procure a variety of ... is rich in building stones i.e. sandstone, granite, marble, fuller's earth, and gypsum

Classify industries on the basis of their main role. How are they different from each other? -SST 10th

Description : Classify industries on the basis of their main role. How are they different from each other? -SST 10th

Last Answer : According to their main role: . Basic or key industries which supply their products or raw materials to manufacture other goods, e.g., iron and steel and coppers melting, aluminium smelting. . ... produce goods for direct use by consumers - sugar, toothpaste, paper, sewing machines, fans etc.|

Classify industries on the basis of source of raw material. How are they different from each other? -SST 10th

Description : Classify industries on the basis of source of raw material. How are they different from each other? -SST 10th

Last Answer : On the basis of sources of raw material industries are classified as: . Agro based: Agro based industries draw their raw materials from agricultural products. For example, Textiles, Sugar, ... from minerals. For example, Iron and Steel industries, cement, machine holes, petrochemicals, etc.

Classify industries on the basis of source of raw material. How are they different from each other ? -SST 10th

Description : Classify industries on the basis of source of raw material. How are they different from each other ? -SST 10th

Last Answer : 1. Industries can be classified into Agro Based Industries and Mineral Based Industries on the basis of raw material. 2. Agro Based Industries have their base in agricultural raw materials. ... as raw materials. These include iron and steel, cement, aluminium, machine tools, petrochemicals etc.

Classify communication services into two categories. Explain main features of each. -SST 10th

Description : Classify communication services into two categories. Explain main features of each. -SST 10th

Last Answer : 1. Communication services can be broadly categorized into two categories - Personal Communication and Mass Communication 2. Personal Communication refers to the communication that takes place ... different topics and issues are also widely circulated in different languages across the country.

Classify energy resources into two categories. Give two examples of each. -SST 10th

Description : Classify energy resources into two categories. Give two examples of each. -SST 10th

Last Answer : Classification of energy resources: 1. Conventional sources of energy have been used for a long period of time and are mostly non-renewable. Examples: Coal, Petroleum. 2. Nonconventional sources of energy are renewable sources which help in sustainable development. Examples: Solar, wind.

Classify energy resources into two categories. Give two examples of each. -SST 10th

Description : Classify energy resources into two categories. Give two examples of each. -SST 10th

Last Answer : Energy resources can be classified into: 1. Conventional Sources of Energy- These are the energy sources that have been used for a long time. They are usually non-renewable sources of energy. ... renewable and not as widely used as conventional sources. For example, solar energy and wind energy.

Based on the information given below classify each of the situations as 'suffering from water scarcity' or 'not suffering from water scarcity' -SST 10th

Description : Based on the information given below classify each of the situations as 'suffering from water scarcity' or 'not suffering from water scarcity' -SST 10th

Last Answer : (a) Not suffering from water scarcity. This is because the freshwater and groundwater are replenished with the annual rainfall. (b) Not suffering from water scarcity. If the annual rainfall is high, then ... by the population is met. As the usage is not too much, water scarcity will not prevail.

Classify resources on the basis of ownership into four categories. Mention the main features of each. -SST 10th

Description : Classify resources on the basis of ownership into four categories. Mention the main features of each. -SST 10th

Last Answer : On the basis of owership resources can be classified into the following categories : (i) Individual Resources. (ii) Community Owned Resources. (iii) National ... these without the concurrence of international insitutions, e.g. manganese nodules in bed of the Indian Ocean.

Classify the industries on the basis of ownership and give one example of each category. -SST 10th

Description : Classify the industries on the basis of ownership and give one example of each category. -SST 10th

Last Answer : Classification of Industries on the basis of ownership:

Having multiple perceptrons can actually solve the XOR problem satisfactorily: this is because each perceptron can partition off a linear part of the space itself, and they can then combine their results. a) True – this works always, and these multiple perceptrons learn to classify even complex problems. b) False – perceptrons are mathematically incapable of solving linearly inseparable functions, no matter what you do c) True – perceptrons can do this but are unable to learn to do it – they have to be explicitly hand-coded d) False – just having a single perceptron is enough

Description : Having multiple perceptrons can actually solve the XOR problem satisfactorily: this is because each perceptron can partition off a linear part of the space itself, and they can then combine their results. ... have to be explicitly hand-coded d) False - just having a single perceptron is enough

Last Answer : c) True – perceptrons can do this but are unable to learn to do it – they have to be explicitly hand-coded

Classify plastic materials into two categories, describe their important properties and give two examples of each.

Description : Classify plastic materials into two categories, describe their important properties and give two examples of each.

Last Answer : Ans: Plastic materials can be classified into thermoplastic and thermosetting plastics. Thermoplastic materials:- The properties of these plastic materials do not change considerably if they are melted ... forming elastic threads and films. Examples are Phenol formaldehyde (Bakelite), Epoxy resins.