What is n- type semiconductor ?

What is n- type semiconductor ?
by

1 Answer

Answer :

When a semiconductor substance is mixed with a five-component element as an adulterant or a waste, the negative charge carrier electron in them acts as the maximum charge carrier. Such semiconductors are called n- type semiconductors.
by

Related questions

What type of circuit is the transmission line ?

Description : What type of circuit is the transmission line ?

Last Answer : Answer : The transmission line is a bilateral circuit.

What is a Shell Type Transformer ?

Description : What is a Shell Type Transformer ?

Last Answer : The core structure of this type of transformer is also rectangular , but it has three arms. Its two arms are empty and only winding is done on the middle arm. This type of core is called shell type.

What is a Core Type Transformer ?

Description : What is a Core Type Transformer ?

Last Answer : Answer : The core of this type of transformer is made up of a rectangular 'L' laminated steel sheet. It encloses most of the core space in the coils. Only one magnetic socket is made in the ... voltage windings are applied to the two opposite arms of such a core. It is called Core Type Transformer.

What is Dry Type Transformer ?

Description : What is Dry Type Transformer ?

Last Answer : This type of transformer uses air instead of oil for cooling and insulation, so it is called dry type transformer.

What type of signal is used in digital electronics ?

Description : What type of signal is used in digital electronics ?

Last Answer : Digital signals are used in digital electronics , the level and value of which are determined.

What type of motor is used in the crane ?

Description : What type of motor is used in the crane ?

Last Answer : Electric peas are used in cranes.

What type of circuit is used in the house ?

Description : What type of circuit is used in the house ?

Last Answer : Parallel circuit is used in home.

Explain the formation of an n-type semiconductor.

Description : Explain the formation of an n-type semiconductor.

Last Answer : When a small amount of a penta valant impurity like antimony, arsenic or phosphorous is added to a tetra valant element like Silicon or Germanium, four out of five electrons of each impurity ... becomes an n-type semiconductor. In an n-type semiconductor the majority charge carriers are electrons.

Classify each of the following as being either a p-type or an n-type Semiconductor.

Description : Classify each of the following as being either a p-type or an n-type Semiconductor.

Last Answer : (a) Ge dopped with In----p-type. (b) B dopped with Si----n-type.

What type of PN diode is formed by using a fine metal wire and a section of N-type semiconductor material?

Description : What type of PN diode is formed by using a fine metal wire and a section of N-type semiconductor material?

Last Answer : Point-contact.

What are the majority carriers in an N-type semiconductor?

Description : What are the majority carriers in an N-type semiconductor?

Last Answer : Electrons.

In the N-type semiconductor the charge carries are a) Holes b) Neutrons c) Protons d) Electrons

Description : In the N-type semiconductor the charge carries are a) Holes b) Neutrons c) Protons d) Electrons

Last Answer : d) Electrons

A semiconductor formed by addition of trivalent impurity is : a) P–Type b) N–Type c) Q–type d) M–Type

Description : A semiconductor formed by addition of trivalent impurity is : a) P–Type b) N–Type c) Q–type d) M–Type

Last Answer : d) M–Type

Hall effect may be used for which of the following? (A) determining whether the semiconductor is p or n type. (B) determining the carrier concentration. (C) calculating the mobility. (D) All the above.

Description : Hall effect may be used for which of the following? (A) determining whether the semiconductor is p or n type. (B) determining the carrier concentration. (C) calculating the mobility. (D) All the above.

Last Answer : (D) All the above. Ans: D Determining whether the semiconductor is p or n type, determining the carrier concentration, calculating the mobility

n-type semiconductor is an example of (A) extrinsic semiconductor. (B) intrinsic semiconductor. (C) super conductor. (D) insulators..

Description : n-type semiconductor is an example of (A) extrinsic semiconductor. (B) intrinsic semiconductor. (C) super conductor. (D) insulators..

Last Answer : (A) extrinsic semiconductor.

State the impurities for obtaining p-type and n-type semiconductor from intrinsic semi conductor.

Description : State the impurities for obtaining p-type and n-type semiconductor from intrinsic semi conductor. 

Last Answer : Crystals of Silicon and Germanium are doped using two types of dopants:  1. The impurities for obtaining n-type semiconductor from intrinsic semiconductor are pentavalent impurity; like Arsenic (As), Antimony ... semiconductor are trivalent impurity; like Indium (In), Boron (B), Aluminum (Al), etc.

Distinguish between P-type and N-type semiconductor.

Description : Distinguish between P-type and N-type semiconductor. 

Last Answer : N- type Semiconductor P- type Semiconductor When small amount of pentavalent impurity is added to a pure semiconductor is called N-type semiconductor When small amount of trivalent impurity ... of electrons The electrons are majority carriers The holes are majority carriers

In an n-type semiconductor, as the donor concentration ND increases, the Fermi level EF:

Description : In an n-type semiconductor, as the donor concentration ND increases, the Fermi level EF: (1) Remains unaltered (2) Moves towards the conduction band (3) Move towards the center of forbidden energy gap (4) May or may not move depending on temperature 

Last Answer : In an n-type semiconductor, as the donor concentration ND increases, the Fermi level EF: Moves towards the conduction band

The material used for ‘doping’ to prepare N - type semiconductor is

Description : The material used for ‘doping’ to prepare N - type semiconductor is

Last Answer : The material used for ‘doping’ to prepare N - type semiconductor is Arsenic

n-type semiconductor can be made by adding ____ to intrinsic semiconductor

Description : n-type semiconductor can be made by adding ____ to intrinsic semiconductor (A) Boron (B) Arsenic (C) Carbon (D) Germanium

Last Answer : n-type semiconductor can be made by adding Arsenic to intrinsic semiconductor

Majority carriers in n type semiconductor are_______.

Description : Majority carriers in n type semiconductor are_______. A. Electrons B. Holes C. Both D. None

Last Answer : Majority carriers in n type semiconductor are Electrons.

An n-type semiconductor is ………

Last Answer : An n-type semiconductor is Electrically neutral.

What is the conductivity of molar ?

Description : What is the conductivity of molar ?

Last Answer : The density of a solution as cm. When one mole of electrolytic substance is dissolved in it, the conductivity obtained by multiplying it by the relative conductivity of the solution is called molecular conductivity of the solution .

How do I purchase a product ?

Description : How do I purchase a product ?

Last Answer : From Alibaba you can purchase products by paying MASTER CARD or through bank.

What is an analog signal ?

Description : What is an analog signal ?

Last Answer : Signals whose values ​​change continuously are called analog signals. For example- voltage of electricity supplied to the house.

What is Zener Diod ?

Description : What is Zener Diod ?

Last Answer : Zener diode is a special type of diode which, like ordinary diode, not only conducts current in the forward direction , but also in the opposite direction if the voltage exceeds the level of breakdown ... diode is to use the shunt regulator and the voltage reference as the voltage of the circuit.

What is the multiplying factor of shunt ?

Description : What is the multiplying factor of shunt ?

Last Answer : Answer : The ratio of load or matte current to ammeter current is called shunt multiplying power.

What is ammeter shunt ?

Description : What is ammeter shunt ?

Last Answer : A small amount of radial coupling in parallel with the coil to increase the range of ammeter is called ammeter shunt.

What is short circuit current ?

Description : What is short circuit current ?

Last Answer : Answer : A fault in an electrical system whose current, before or after the current flows through the load, is combined with one or more phases of neutral current which causes more current to flow than normal. The current is called short circuit current.

What is a current limiting reactor ? How many types and what are they ?

Description : What is a current limiting reactor ? How many types and what are they ?

Last Answer : Answer : A current limiting reactor is basically an inductive coil which limits the short circuit current by providing inductive reactance when required. Types: 1. Based on the structure- a) Dry type ... reactor. Basbar reactors are again of 2 types- a) Ring system reactor b) Tiber system reactor

What is the method of diagnosing short circuit current ?

Description : What is the method of diagnosing short circuit current ?

Last Answer : There are three methods for determining short circuit current , namely- 1) Ohmic method 2) Per unit method 3.) Percentage reactance method.

What are symmetrical and asymmetrical faults ?

Description : What are symmetrical and asymmetrical faults ?

Last Answer : Symmetrical Fault: The same amount in each phase due to the float in the electrical system. The fault that causes hot current to flow is called semantic fault. Circuit breaker ratings are determined by ... through each fan is called an asymmetrical fault. The relay is set via asymmetrical font.

What is Basbar and Bas Kaplar ?

Description : What is Basbar and Bas Kaplar ?

Last Answer : Basbar : Basbar is basically a sheet or color of copper or aluminum. It is the job of the bus driver to deliver power to one or more lads with power from one or more cables. Bus ... is basically a combination of circuit breaker and isolator. There are fire proof walls around the bus coupler.

Why is the busbar sectionalized ?

Description : Why is the busbar sectionalized ?

Last Answer : Answer : If an error occurs in any part of the busbar, the operation of the entire busbar system will not stop. The maximum success of this system is due to the interconnection of different sections of the circuit and the smooth distribution in the outgoing circuit.

title : _

Description : title : _

Last Answer : Basbar is a type of copper and aluminum conductive sheet or mata rod , which collects electrical energy from one or more circuits and distributes that energy through one or more circuits.

Write different font names or different short circuit font names ?

Description : Write different font names or different short circuit font names ?

Last Answer : There are two main types of short circuit faults. Namely- 1. Semantic faults and 2. Asymmetrical font Symmetrical fault - a) Short circuit three phases together b) Short circuit asymmetrical fault with three ... result c) Double line to ground font d) Two phase one Circuit and third phase earth.

What is Electrical Fault ? What is the cause of the fault ?

Description : What is Electrical Fault ? What is the cause of the fault ?

Last Answer : Answer : Fault: When two or more conductors come in contact with each other while operating at normal voltage difference, the result is said to be organized. Causes of Fault: Faults are organized due to ... loss of line c) Lightning charge d) Voltage drop e) Loss of unbalance and stability etc.

What features should a switchgear have ?

Description : What features should a switchgear have ?

Last Answer : Switchgear should have the following characteristics- a) Sensitivity b) Detection ability c) Reliability d) High speed e) Durability. F) Expansion advantage g) Simplicity.

What are the components of switch gear ?

Description : What are the components of switch gear ?

Last Answer : The components of switch gear are: circuit breaker , relay , instrument transformer , housing , conductor etc.

What do you mean by switchgear ?

Description : What do you mean by switchgear ?

Last Answer : Answer : Switch gear does not mean a single corner object. It refers to the position of the electromagnetic system, including the connective , isolating , and maintenance equipment of normal activity .

What is an Earth Electrode ?

Description : What is an Earth Electrode ?

Last Answer : Puta metal part in the soil which connects to the soil is called earth electrode. Thank you all for today's electrical questions and answers.

What is Earthing Lead ?

Description : What is Earthing Lead ?

Last Answer : The wire that connects the earth continuity wire and the earth electrode is called the earthing lead.

What earthing is done in hilly areas ?

Description : What earthing is done in hilly areas ?

Last Answer : Sheet earthing is done in hilly areas. Shit electrodes are placed by digging trenches on the slopes of the hill.

What should be the size of rod earthing ?

Description : What should be the size of rod earthing ?

Last Answer : In case of iron or steel rod the diameter is 16 mm but in case of copper rod it is 12.5 mm. In both cases the length is at least 2.5 m. Is to be.

What does earth continuity mean ?

Description : What does earth continuity mean ?

Last Answer : The conduction wire that connects the earthing lead to the metal cover of electrical furniture, appliances, or wiring is called the earth continuity wire.

Which earthing is less expensive ?

Description : Which earthing is less expensive ?

Last Answer : Rod earthing is the least expensive. Because the soil does not have to be eroded, the cost is less than other earthing.

What should be the size of the pipe electrode ?

Description : What should be the size of the pipe electrode ?

Last Answer : The size of the pipe electrode should be 36 mm diameter 2 to 2.75 m long galvanized iron or steel pipe.

How many types of earthing and what are they ?

Description : How many types of earthing and what are they ?

Last Answer : There are two types of earthing , namely _ a) system earthing b) equipment earthing.

What are the essential elements for earthing ?

Description : What are the essential elements for earthing ?

Last Answer : They are _ a) earthen continuity b) earthing lead c) earthy electrode

What is the best earthing method ?

Description : What is the best earthing method ?

Last Answer : Pipe earthing method is best. This is because it is less expensive and when the soil dries out in the dry season , regular earthing can be done by pouring water through the pipes.