In a moderately sized packed absorption tower, channelling (which is most severe with stacked packings) can be minimised by taking the ratio of tower diameter to packing diameter (A) > 4 :1 (B) < 8 : 1 (C) > 8:1 (D) < 6:1

In a moderately sized packed absorption tower, channelling (which is
most severe with stacked packings) can be minimised by taking the ratio of
tower diameter to packing diameter
(A) > 4 :1
(B) < 8 : 1
(C) > 8:1
(D) < 6:1
by

1 Answer

Answer :

(C) > 8:1
by

Related questions

Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the possibility of tower wall collapse (B) Packed towers are preferred over plate towers for handling corrosive and foamy liquids (C) Diameter of randomly packed tower is normally more than 1.2 metres (D) Due to uneven supply and improper distribution of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Description : Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the ... of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Last Answer : (C) Diameter of randomly packed tower is normally more than 1.2 metres

Channelling is most severe (A) In towers packed with stacked packing (B) In towers packed randomly with crushed solids (C) In dumped packing of regular units

Description : Channelling is most severe (A) In towers packed with stacked packing (B) In towers packed randomly with crushed solids (C) In dumped packing of regular units

Last Answer : (A) In towers packed with stacked packing

Channelling in a packed tower results from the (A) High pressure drop (B) Maldistribution of liquid (C) Non-uniformity of packing (D) Both (B) and (C)

Description : Channelling in a packed tower results from the (A) High pressure drop (B) Maldistribution of liquid (C) Non-uniformity of packing (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Plate towers are preferred to packed towers, when large temperature changes are involved, because of the reason that the (A) Packing may be crushed due to thermal expansion/contraction of the components of the equipments (B) Pressure drop in the equipment will be very high (C) Viscosity variation of the fluids may cause channelling/flooding (D) None of these

Description : Plate towers are preferred to packed towers, when large temperature changes are involved, because of the reason that the (A) Packing may be crushed due to thermal expansion/contraction of the ... C) Viscosity variation of the fluids may cause channelling/flooding (D) None of these

Last Answer : (A) Packing may be crushed due to thermal expansion/contraction of the components of the equipments

Which of these columns incurs the lowest pressure drop? (A) Packed column (with stacked packing) (B) Packed column (with dumped packing) (C) Bubble plate column (D) Pulse column

Description : Which of these columns incurs the lowest pressure drop? (A) Packed column (with stacked packing) (B) Packed column (with dumped packing) (C) Bubble plate column (D) Pulse column

Last Answer : (A) Packed column (with stacked packing)

The main reason for dividing a tall packed tower into series of small towers is to (A) Minimise the overall pressure drop (B) Avoid flooding (C) Reduce liquid hold up (D) Avoid channelling

Description : The main reason for dividing a tall packed tower into series of small towers is to (A) Minimise the overall pressure drop (B) Avoid flooding (C) Reduce liquid hold up (D) Avoid channelling

Last Answer : (D) Avoid channelling

In a packed bed absorption column, the channelling will be noted by the (A) Increase in flow rate (B) Sharp drop in pressure drop (C) Sharp rise in pressure drop (D) None of these

Description : In a packed bed absorption column, the channelling will be noted by the (A) Increase in flow rate (B) Sharp drop in pressure drop (C) Sharp rise in pressure drop (D) None of these

Last Answer : (B) Sharp drop in pressure drop

In an absorption column, the flooding velocity for random packing is __________ that for stacked/regular packing. (A) Greater than (B) Smaller than (C) Equal to (D) Either (A), or (B); depends on the type of packing

Description : In an absorption column, the flooding velocity for random packing is __________ that for stacked/regular packing. (A) Greater than (B) Smaller than (C) Equal to (D) Either (A), or (B); depends on the type of packing

Last Answer : (B) Smaller than

Which of the following same diameter columns gives lowest pressure drop per unit height? (A) Bubble-cap column (B) Sieve-plate column (C) Packed column (stacked)

Description : Which of the following same diameter columns gives lowest pressure drop per unit height? (A) Bubble-cap column (B) Sieve-plate column (C) Packed column (stacked)

Last Answer : (C) Packed column (stacked)

Most important factor to be considered in the selection of packings for absorbers is the __________ of packing. (A) Size (B) Durability (C) Porosity (D) Cost

Description : Most important factor to be considered in the selection of packings for absorbers is the __________ of packing. (A) Size (B) Durability (C) Porosity (D) Cost

Last Answer : (C) Porosity

Pressure drop through plate tower as compared to that through packed tower, for the same duty will be (A) Less (B) More (C) Equal (D) Either (A) or (B); depends on the packing height

Description : Pressure drop through plate tower as compared to that through packed tower, for the same duty will be (A) Less (B) More (C) Equal (D) Either (A) or (B); depends on the packing height

Last Answer : (B) More

In a packed absorption tower, if the equilibrium and operating lines are both straight lines, then the ratio, HETP/HTUOG __________ the absorption factor. (A) Increases with increase in (B) Is one at unity value of (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : In a packed absorption tower, if the equilibrium and operating lines are both straight lines, then the ratio, HETP/HTUOG __________ the absorption factor. (A) Increases with increase in (B) Is one at unity value of (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Very tall packed towers are divided into series of beds to (A) Reduce the overall pressure drop (B) Avoid channelling (C) Reduce liquid hold-up (D) Avoid flooding

Description : Very tall packed towers are divided into series of beds to (A) Reduce the overall pressure drop (B) Avoid channelling (C) Reduce liquid hold-up (D) Avoid flooding

Last Answer : (B) Avoid channelling

For a packed bed reactor; the presence of a long tail in the residence time distribution curve is an indication of: (A) Ideal plug flow (B) Bypass (C) Dead zone (D) Channelling

Description : For a packed bed reactor; the presence of a long tail in the residence time distribution curve is an indication of: (A) Ideal plug flow (B) Bypass (C) Dead zone (D) Channelling

Last Answer : (C) Dead zone

Diameter of raschig rings used in packed tower in industry is normally around __________ inches. (A) 2 (B) 8 (C) 12 (D) 18

Description : Diameter of raschig rings used in packed tower in industry is normally around __________ inches. (A) 2 (B) 8 (C) 12 (D) 18

Last Answer : (A) 2

Stacked packing compared to dumped packing (A) Provides poorer contact between the fluids (B) Gives lower pressure drop (C) Both (A) and (B) (D) Gives higher pressure drop

Description : Stacked packing compared to dumped packing (A) Provides poorer contact between the fluids (B) Gives lower pressure drop (C) Both (A) and (B) (D) Gives higher pressure drop

Last Answer : (C) Both (A) and (B)

Use of raschig rings in place of crushed stones as packing in packed beds (other things being same) (A) Increases pressure drop, increases surface area (B) Increases pressure drop, decreases surface area (C) Decreases pressure drop, increases surface area (D) Decreases pressure drop, decreases surface area

Description : Use of raschig rings in place of crushed stones as packing in packed beds (other things being same) (A) Increases pressure drop, increases surface area (B) Increases pressure drop, decreases ... (C) Decreases pressure drop, increases surface area (D) Decreases pressure drop, decreases surface area

Last Answer : (C) Decreases pressure drop, increases surface area

Out of the following, the lowest packing of atoms exists in __________ crystal lattice structure. (A) Hexagonal close, packed (hcp) (B) Face centred cubic (fcc) (C) Body centred cubic (bcc) (D) Simple cubic

Description : Out of the following, the lowest packing of atoms exists in __________ crystal lattice structure. (A) Hexagonal close, packed (hcp) (B) Face centred cubic (fcc) (C) Body centred cubic (bcc) (D) Simple cubic

Last Answer : (D) Simple cubic

(1) they contain free electrons Explanation: Metals typically consist of closepacked atoms, meaning that the atoms are arranged like closely packed spheres. Two packing motifs are common, one being bodycentered cubic wherein each metal atom is surrounded by eight equivalent atoms. The other main motif is face-centered cubic where the metal atoms are surrounded by six neighboring atoms. Several metals adopt both structures, depending on the temperature.

Description : (1) they contain free electrons Explanation: Metals typically consist of closepacked atoms, meaning that the atoms are arranged like closely packed spheres. Two packing motifs are common, one ... surrounded by six neighboring atoms. Several metals adopt both structures, depending on the temperature.

Last Answer : Helium gas is filled in ballons because (1) its atomic number is 2 (2) it is lighter than air (3) it is one of the constitutents of water (4) it is a noble gas

In severe acidosis, the output of urea is (A) Decreased (B) Slightly increased (C) Highly increased (D) Moderately increased

Description : In severe acidosis, the output of urea is (A) Decreased (B) Slightly increased (C) Highly increased (D) Moderately increased

Last Answer : Answer : A

If PE denotes monthly average value of potential evapo–transpiration and R stands for monthly average rainfall, the period having PE/4 greater than or equal to R, is designated as...... (A) Moist (B) Humid (C) Moderately Dry (D) Severe Drought (E) Dry

Description : If PE denotes monthly average value of potential evapo–transpiration and R stands for monthly average rainfall, the period having PE/4 greater than or equal to R, is designated as...... (A) Moist (B) Humid (C) Moderately Dry (D) Severe Drought (E) Dry

Last Answer : (C) Moderately Dry

component of the management of moderately severe diabetic ketoacidosis: A. Insulin B. Intravenous fluids C. Potassium chloride D. Sodium bicarbonate

Description : component of the management of moderately severe diabetic ketoacidosis: A. Insulin B. Intravenous fluids C. Potassium chloride D. Sodium bicarbonate

Last Answer : D. Sodium bicarbonate

Which of the following measures is not an essential component of the management of moderately severe diabetic ketoacidosis: A. Insulin B. Intravenous fluids C. Potassium chloride D. Sodium bicarbonate

Description : Which of the following measures is not an essential component of the management of moderately severe diabetic ketoacidosis: A. Insulin B. Intravenous fluids C. Potassium chloride D. Sodium bicarbonate

Last Answer : . Sodium bicarbonate

A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system (in SI units) is given below: Δ P/L = 375 × 10 3 VOM + 10.94 × 10 6 V2 OM (SI units) If water is to be used as the fluidising medium, in actual operation, the above bed has a height = 1 m. What is the porosity of the fluidised bed? (A) 0.2 (B) 0.5 (C) 0.7 (D) 0.8

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system ... What is the porosity of the fluidised bed? (A) 0.2 (B) 0.5 (C) 0.7 (D) 0.8

Last Answer : (C) 0.7

Variation in the drop size of seed can be minimised by (a) Using a short, smooth, small diameter tube with the discharge end close to bottom of furrow. (b) Discharging the seed directly from the metering device within a few centimetres of the furrow bottom. (c) Mechanically transferring the seeds from the metering unit in the furrow. (d) All of the above.

Description : Variation in the drop size of seed can be minimised by (a) Using a short, smooth, small diameter tube with the discharge end close to bottom of furrow. (b) Discharging the seed directly from ... (c) Mechanically transferring the seeds from the metering unit in the furrow. (d) All of the above.

Last Answer : d) All of the above.

An ideal tower packing should not (A) Have low weight per unit volume (B) Have large surface area per unit volume (C) Have large free cross-section (D) Hold up large amount of liquid in the packing

Description : An ideal tower packing should not (A) Have low weight per unit volume (B) Have large surface area per unit volume (C) Have large free cross-section (D) Hold up large amount of liquid in the packing

Last Answer : (D) Hold up large amount of liquid in the packing

Which of the following is an undesirable property in a tower packing? (A) Large surface per unit volume (B) Large free cross-section (C) Low weight per unit volume (D) Large weight of liquid retained

Description : Which of the following is an undesirable property in a tower packing? (A) Large surface per unit volume (B) Large free cross-section (C) Low weight per unit volume (D) Large weight of liquid retained

Last Answer : (D) Large weight of liquid retained

If one amino acid is fed excess, the absorption of another is (A) Slightly accelerated (B) Moderately accelerated (C) Highly accelerated (D) Retarded

Description : If one amino acid is fed excess, the absorption of another is (A) Slightly accelerated (B) Moderately accelerated (C) Highly accelerated (D) Retarded

Last Answer : Answer : D

SO3 is absorbed using H2SO4 in a (A) Cast iron packed tower (B) Stainless steel plate tower (C) Packed steel tower lined with acid proof bricks (D) None of these

Description : SO3 is absorbed using H2SO4 in a (A) Cast iron packed tower (B) Stainless steel plate tower (C) Packed steel tower lined with acid proof bricks (D) None of these

Last Answer : (C) Packed steel tower lined with acid proof bricks

Which of the following is the most suitable for extraction in a system having very low density difference? (A) Mixer-settler extractor (B) Centrifugal extractor (C) Pulsed extractor (D) Packed extraction tower

Description : Which of the following is the most suitable for extraction in a system having very low density difference? (A) Mixer-settler extractor (B) Centrifugal extractor (C) Pulsed extractor (D) Packed extraction tower

Last Answer : (B) Centrifugal extractor

Hydrogenation of oil is carried out in a/an __________ in Vanaspati manufacturing plant. (A) Agitated vessel (B) Sieve tray column (C) Bubble cap column (D) Packed tower

Description : Hydrogenation of oil is carried out in a/an __________ in Vanaspati manufacturing plant. (A) Agitated vessel (B) Sieve tray column (C) Bubble cap column (D) Packed tower

Last Answer : (A) Agitated vessel

A packed tower compared to a plate tower for a particular mass transfer operation (A) Incurs smaller pressure drop (B) Allows installation of cooling coils (C) Is less costly when built in large sizes/diameters (D) Is more suitable, if suspended solids are present in fluid stream

Description : A packed tower compared to a plate tower for a particular mass transfer operation (A) Incurs smaller pressure drop (B) Allows installation of cooling coils (C) Is less costly when built in large sizes/diameters (D) Is more suitable, if suspended solids are present in fluid stream

Last Answer : (A) Incurs smaller pressure drop

In a packed tower, the value of HETP equals HTUOG, when the equilibrium and the operating lines are (where, HETP = height equivalent to a theoretical plate HTUOG = overall gas phase height of a transfer unit). (A) Straight (B) Parallel (C) Both (A) & (B) (D) Neither (A) nor (B

Description : In a packed tower, the value of HETP equals HTUOG, when the equilibrium and the operating lines are (where, HETP = height equivalent to a theoretical plate HTUOG = overall gas phase height of a transfer unit). (A) Straight (B) Parallel (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Under conditions of flooding in packed tower, the gas pressure drop (A) Decreases rapidly (B) Increases rapidly (C) Remain constant (D) Is maximum

Description : Under conditions of flooding in packed tower, the gas pressure drop (A) Decreases rapidly (B) Increases rapidly (C) Remain constant (D) Is maximum

Last Answer : (D) Is maximum

Pick out the correct statement. (A) For identical gas flow rates, less pressure drop occurs through a plate tower than through a packed tower (B) Plate column can handle greater liquid loads without flooding than packed column, but the liquid hold up is more in the case of plate column (C) For the same duty, plate columns weigh less than packed columns (D) All (A), (B) and (C)

Description : Pick out the correct statement. (A) For identical gas flow rates, less pressure drop occurs through a plate tower than through a packed tower (B) Plate column can handle greater liquid loads without flooding than packed ... duty, plate columns weigh less than packed columns (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Out of the following gas-liquid contacting devices, for a given set of operating conditions, gas pressure drop is the least in __________ tower. (A) Wetted wall (B) Bubble cap (C) Perforated tray (D) Packed

Description : Out of the following gas-liquid contacting devices, for a given set of operating conditions, gas pressure drop is the least in __________ tower. (A) Wetted wall (B) Bubble cap (C) Perforated tray (D) Packed

Last Answer : (A) Wetted wall

At the same gas flow rate, the pressure drop in a packed tower being irrigated with liquid __________ that in dry packed tower. (A) Is greater than (B) Is lower than (C) Is same as (D) Cannot be predicted as data are insufficient

Description : At the same gas flow rate, the pressure drop in a packed tower being irrigated with liquid __________ that in dry packed tower. (A) Is greater than (B) Is lower than (C) Is same as (D) Cannot be predicted as data are insufficient

Last Answer : (A) Is greater than

The reason for preferring packed towers over plate towers in distillation practice is that the packed tower operation gives (A) Low pressure drop and high hold up (B) High pressure drop and low hold up (C) Low pressure drop and low hold up (D) High pressure drop and high hold up

Description : The reason for preferring packed towers over plate towers in distillation practice is that the packed tower operation gives (A) Low pressure drop and high hold up (B) High pressure drop and low hold ... C) Low pressure drop and low hold up (D) High pressure drop and high hold up

Last Answer : (C) Low pressure drop and low hold up

Sodium bicarbonate is produced during soda ash manufacture using a __________ tower. (A) Plate (B) Baffle (C) Packed (D) None of these

Description : Sodium bicarbonate is produced during soda ash manufacture using a __________ tower. (A) Plate (B) Baffle (C) Packed (D) None of these

Last Answer : (B) Baffle

Pick out the wrong statement: (A) Change in barometric pressure does not affect the relative humidity (B) In case of a packed tower, the operating velocity is about half of the flooding velocity, generally (C) 'Elution' means the desorption of the adsorbed solute by a solvent (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Description : Pick out the wrong statement: (A) Change in barometric pressure does not affect the relative humidity (B) In case of a packed tower, the operating velocity is about half of the ... (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Last Answer : (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Operating velocity in a packed tower is usually __________ the flooding velocity. (A) Half (B) Twice (C) Equal to (D) More than

Description : Operating velocity in a packed tower is usually __________ the flooding velocity. (A) Half (B) Twice (C) Equal to (D) More than

Last Answer : (A) Half

Packed column distillation is limited to the column __________ metres. (A) Height < 6 (B) Diameter < 0.6 (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Packed column distillation is limited to the column __________ metres. (A) Height < 6 (B) Diameter < 0.6 (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system (in SI units) is given below : Δ P/L = 375 × 10 3 VOM + 10.94 × 10 6 V2 OM (SI units) If water is to be used as the fluidising medium, the minimum fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle ... fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Last Answer : (B) 16 mm/s

__________ column is used in gas absorption process. (A) Wetted wall (B) Sieve/perforated tray (C) Bubble cap (D) Packed

Description : __________ column is used in gas absorption process. (A) Wetted wall (B) Sieve/perforated tray (C) Bubble cap (D) Packed

Last Answer : (D) Packed

Which one of the following devices is not used for both the absorption as well as the liquid-liquid extraction processes? (A) Packed towers(B) Plate towers(C) Spray towers(D) Wetted wall columns

Description : Which one of the following devices is not used for both the absorption as well as the liquid-liquid extraction processes? (A) Packed towers (B) Plate towers (C) Spray towers (D) Wetted wall columns

Last Answer : (D) Wetted wall columns

With increase in the liquid flow rate at a fixed gas velocity in a randomly packed counter current gas-liquid absorption column, the gas pressure drop (A) Decreases (B) Remains unchanged (C) Increases (D) Decreases exponentially

Description : With increase in the liquid flow rate at a fixed gas velocity in a randomly packed counter current gas-liquid absorption column, the gas pressure drop (A) Decreases (B) Remains unchanged (C) Increases (D) Decreases exponentially

Last Answer : (C) Increases

Tower diameter may be decreased by (A) Using higher reflux ratio (B) Use of increased tray spacing (C) Increasing the liquid flow rate (D) Increasing the vapour flow rate

Description : Tower diameter may be decreased by (A) Using higher reflux ratio (B) Use of increased tray spacing (C) Increasing the liquid flow rate (D) Increasing the vapour flow rate

Last Answer : (B) Use of increased tray spacing

The lustre of the metals is because of (1) high density, due to closed packing of atoms (2) high polish (3) reflection of light due to the presence of free electrons (4) absorption of light due to the presence of cavities

Description : The lustre of the metals is because of (1) high density, due to closed packing of atoms (2) high polish (3) reflection of light due to the presence of free electrons (4) absorption of light due to the presence of cavities

Last Answer : reflection of light due to the presence of free electrons