Packed column distillation is limited to the column __________ metres. (A) Height < 6 (B) Diameter < 0.6 (C) Both (A) & (B) (D) Neither (A) nor (B)

Packed column distillation is limited to the column __________ metres.

(A) Height < 6

(B) Diameter < 0.6

(C) Both (A) & (B)

(D) Neither (A) nor (B)

by

1 Answer

Answer :

(C) Both (A) & (B)

by

Related questions

In a packed tower, the value of HETP equals HTUOG, when the equilibrium and the operating lines are (where, HETP = height equivalent to a theoretical plate HTUOG = overall gas phase height of a transfer unit). (A) Straight (B) Parallel (C) Both (A) & (B) (D) Neither (A) nor (B

Description : In a packed tower, the value of HETP equals HTUOG, when the equilibrium and the operating lines are (where, HETP = height equivalent to a theoretical plate HTUOG = overall gas phase height of a transfer unit). (A) Straight (B) Parallel (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given ‘L/V’ ratio (B) The extraction per unit of total height for a short packed column is more effective than for a tall column, in case of liquid-liquid extraction(C) Natural draft cooling towers are made of ferroconcrete and its cross￾section is wider at the bottom(D) Vander wall adsorption is also called chemisorption

Description : Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given L/V' ratio (B) The extraction per unit ... and its cross￾section is wider at the bottom (D) Vander wall adsorption is also called chemisorption

Last Answer : (D) Vander wall adsorption is also called chemisorption

Safe condition for storage of high V.M. bituminous coal is that (A) Height of the coal heap should be < 3 metres (B) Maximum 200 tons should be stored in a heap (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Safe condition for storage of high V.M. bituminous coal is that (A) Height of the coal heap should be < 3 metres (B) Maximum 200 tons should be stored in a heap (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the possibility of tower wall collapse (B) Packed towers are preferred over plate towers for handling corrosive and foamy liquids (C) Diameter of randomly packed tower is normally more than 1.2 metres (D) Due to uneven supply and improper distribution of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Description : Pick out the wrong statement. (A) Packed towers are preferred for vacuum operation, because the pressure drop through the packing is less and they (packings) also lessen the ... of liquid, problem of channelling, loading & flooding is generally encountered in packed towers

Last Answer : (C) Diameter of randomly packed tower is normally more than 1.2 metres

Which of the following same diameter columns gives lowest pressure drop per unit height? (A) Bubble-cap column (B) Sieve-plate column (C) Packed column (stacked)

Description : Which of the following same diameter columns gives lowest pressure drop per unit height? (A) Bubble-cap column (B) Sieve-plate column (C) Packed column (stacked)

Last Answer : (C) Packed column (stacked)

In a packed absorption tower, if the equilibrium and operating lines are both straight lines, then the ratio, HETP/HTUOG __________ the absorption factor. (A) Increases with increase in (B) Is one at unity value of (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : In a packed absorption tower, if the equilibrium and operating lines are both straight lines, then the ratio, HETP/HTUOG __________ the absorption factor. (A) Increases with increase in (B) Is one at unity value of (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Use of packed towers for distillation is generally limited to the (A) Small sizes (B) Multi-component distillation (C) High pressure operation (D) Vacuum distillation

Description : Use of packed towers for distillation is generally limited to the (A) Small sizes (B) Multi-component distillation (C) High pressure operation (D) Vacuum distillation

Last Answer : (A) Small sizes

Small dia distillation column can be a (A) Packed column (B) Sieve tray (C) Bubble cap (D) Any of these

Description : Small dia distillation column can be a (A) Packed column (B) Sieve tray (C) Bubble cap (D) Any of these

Last Answer : (A) Packed column

Benzol is used (A) As a motor fuel blend (B) For producing benzene, toluene & xylene by its distillation (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Benzol is used (A) As a motor fuel blend (B) For producing benzene, toluene & xylene by its distillation (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system (in SI units) is given below: Δ P/L = 375 × 10 3 VOM + 10.94 × 10 6 V2 OM (SI units) If water is to be used as the fluidising medium, in actual operation, the above bed has a height = 1 m. What is the porosity of the fluidised bed? (A) 0.2 (B) 0.5 (C) 0.7 (D) 0.8

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system ... What is the porosity of the fluidised bed? (A) 0.2 (B) 0.5 (C) 0.7 (D) 0.8

Last Answer : (C) 0.7

Applicability of Bernoulli's equation is limited to a/an __________ fluid, that does not exchange shaft work with the surroundings. (A) Incompressible (B) Non-viscous (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Applicability of Bernoulli's equation is limited to a/an __________ fluid, that does not exchange shaft work with the surroundings. (A) Incompressible (B) Non-viscous (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

In a reservoir the average volume of sediment deposition is 0.15 million cubic per year. If the dead storage and total capacity of the reservoir are 8 million cubic metres and 36 million cubic metres respectively, (A) The reservoir will theoretically be silted in 240 years (B) The reservoir will start reducing after 60 years (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : In a reservoir the average volume of sediment deposition is 0.15 million cubic per year. If the dead storage and total capacity of the reservoir are 8 million cubic metres and 36 million cubic metres respectively, (A) The ... reducing after 60 years (C) Both (a) and (b) (D) Neither (a) nor (b)

Last Answer : (C) Both (a) and (b)

Hydraulic mean depth (Dm) for a circular pipe of diameter 'D' flowing full is 0.25 D. For a circular channel, at Dm = 0.3 D, gives the condition for the maximum (A) Flow rate (B) Mean velocity (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Description : Hydraulic mean depth (Dm) for a circular pipe of diameter 'D' flowing full is 0.25 D. For a circular channel, at Dm = 0.3 D, gives the condition for the maximum (A) Flow rate (B) Mean velocity (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Last Answer : (B) Mean velocity

For a longitudinal reinforcing bar in a column, the minimum cover shall neither be less than the diameter of bar nor less than (A) 15 mm (B) 25 mm (C) 30 mm (D) 40 mm

Description : For a longitudinal reinforcing bar in a column, the minimum cover shall neither be less than the diameter of bar nor less than (A) 15 mm (B) 25 mm (C) 30 mm (D) 40 mm

Last Answer : Answer: Option D

The assumption made in Elis method in distillation is that enthalpy concentration lines of vapor and liquid are (A) Parallel (B) Straight (C) Both parallel and straight (D) Neither parallel nor straight

Description : The assumption made in Elis method in distillation is that enthalpy concentration lines of vapor and liquid are (A) Parallel (B) Straight (C) Both parallel and straight (D) Neither parallel nor straight

Last Answer : (C) Both parallel and straight

The amount of steam required per unit quantity of distillate in case of steam distillation will be reduced by (A) Raising the temperature (B) Lowering the total pressure (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The amount of steam required per unit quantity of distillate in case of steam distillation will be reduced by (A) Raising the temperature (B) Lowering the total pressure (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B

Steam distillation is used for separation of high boiling (A) Substances from non-volatile impurities (B) Volatile impurity from still higher boiling substances (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Steam distillation is used for separation of high boiling (A) Substances from non-volatile impurities (B) Volatile impurity from still higher boiling substances (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Minimum possible diameter of a packed column is decided mainly bythe(A) Flooding(B) Gas viscosity(C) Liquid density(D) Liquid hold up

Description : Minimum possible diameter of a packed column is decided mainly bythe (A) Flooding (B) Gas viscosity (C) Liquid density (D) Liquid hold up

Last Answer : (A) Flooding

Measurement of the interfacial area of mass transfer is achieved easily & accurately in case of a __________ column. (A) Spray (B) Packed (C) Bubble cap plate (D) Wetted wall

Description : Measurement of the interfacial area of mass transfer is achieved easily & accurately in case of a __________ column. (A) Spray (B) Packed (C) Bubble cap plate (D) Wetted wall

Last Answer : (D) Wetted wall

Niche Marketing refer to 1. A strategy that specializes in limited or unique product category 2. A strategy that specializes Niche products 3. Both 1 & 2 4. Neither 1 nor 2 5. None of these

Description : Niche Marketing refer to 1. A strategy that specializes in limited or unique product category 2. A strategy that specializes Niche products 3. Both 1 & 2 4. Neither 1 nor 2 5. None of these

Last Answer : A strategy that specializes in limited or unique product category

Niche Marketing refers to 1. a strategy that specializes in limited or unique product category 2. a strategy that specializes niche products 3. both 1 & 2 4. neither 1 nor 2 5. none of these

Description : Niche Marketing refers to 1. a strategy that specializes in limited or unique product category 2. a strategy that specializes niche products 3. both 1 & 2 4. neither 1 nor 2 5. none of these

Last Answer : a strategy that specializes in limited or unique product category

Height of coke oven is limited (say maximum upto 7 metres) mainly by the(A) Problem of uniform heating along its height(B) Structural strength of silica bricks(C) Problem in door cleaning(D) Buckling of ram of pusher car at the time of coke pushing

Description : Height of coke oven is limited (say maximum upto 7 metres) mainly by the (A) Problem of uniform heating along its height (B) Structural strength of silica bricks (C) Problem in door cleaning (D) Buckling of ram of pusher car at the time of coke pushing

Last Answer : (A) Problem of uniform heating along its height

Noise produced by cooling fans (employed in air cooled heat exchangers or cooling tower) is mainly caused due to the turbulence created by blade passage through air. It can be reduced by use of a slower fan (A) With greater number of blades (B) Of increased diameter (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Noise produced by cooling fans (employed in air cooled heat exchangers or cooling tower) is mainly caused due to the turbulence created by blade passage through air. It can be reduced by use of a slower fan (A) With greater ... (B) Of increased diameter (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Natural draft created by the chimney depends upon (A) Temperature of the flue gas (B) Its height (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Natural draft created by the chimney depends upon (A) Temperature of the flue gas (B) Its height (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

For maximum discharge through a chimney, its height should be (A) 200 meters (B) Infinitely long (C) More than 105.7 metres (D) Equal to the height of the hot gas column producing draught

Description : For maximum discharge through a chimney, its height should be (A) 200 meters (B) Infinitely long (C) More than 105.7 metres (D) Equal to the height of the hot gas column producing draught

Last Answer : (D) Equal to the height of the hot gas column producing draught

Plate efficiency in a distillation column is reduced due to the __________ of liquid. (A) Entrainment (B) Foaming (C) Weeping & dumping (D) All (A), (B) & (C)

Description : Plate efficiency in a distillation column is reduced due to the __________ of liquid. (A) Entrainment (B) Foaming (C) Weeping & dumping (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Fenske equation determines the (A) Maximum number of ideal plates (B) Height of the distillation column (C) Minimum number of theoretical plates (D) Optimum reflux ratio

Description : Fenske equation determines the (A) Maximum number of ideal plates (B) Height of the distillation column (C) Minimum number of theoretical plates (D) Optimum reflux ratio

Last Answer : (C) Minimum number of theoretical plates

Extraction of penicillin employs a __________ extraction column. (A) Centrifugal (B) Packed (C) Plate (D) None of these

Description : Extraction of penicillin employs a __________ extraction column. (A) Centrifugal (B) Packed (C) Plate (D) None of these

Last Answer : (A) Centrifugal

__________ column is the most suitable for achieving the best performance for mass transfer operations involving liquid with dispersed solids. (A) Wetted wall (B) Packed (C) Plate (D) Spray

Description : __________ column is the most suitable for achieving the best performance for mass transfer operations involving liquid with dispersed solids. (A) Wetted wall (B) Packed (C) Plate (D) Spray

Last Answer : C) Plate

Hydrogenation of oil is carried out in a/an __________ in Vanaspati manufacturing plant. (A) Agitated vessel (B) Sieve tray column (C) Bubble cap column (D) Packed tower

Description : Hydrogenation of oil is carried out in a/an __________ in Vanaspati manufacturing plant. (A) Agitated vessel (B) Sieve tray column (C) Bubble cap column (D) Packed tower

Last Answer : (A) Agitated vessel

. __________ column is preferred to be used, when a high liquid hold up is required in a reactor for gas-liquid reaction. (A) Packed (B) Bubble (C) Spray (D) Tray

Description : . __________ column is preferred to be used, when a high liquid hold up is required in a reactor for gas-liquid reaction. (A) Packed (B) Bubble (C) Spray (D) Tray

Last Answer : (B) Bubble

__________ column is used in gas absorption process. (A) Wetted wall (B) Sieve/perforated tray (C) Bubble cap (D) Packed

Description : __________ column is used in gas absorption process. (A) Wetted wall (B) Sieve/perforated tray (C) Bubble cap (D) Packed

Last Answer : (D) Packed

When a high liquid hold up is required in a reactor for gas liquid reaction, use __________ column. (A) Packed (B) Spray (C) Tray (D) Bubble

Description : When a high liquid hold up is required in a reactor for gas liquid reaction, use __________ column. (A) Packed (B) Spray (C) Tray (D) Bubble

Last Answer : (D) Bubble

Head developed by a centrifugal pump depends on its (A) Speed (B) Impeller diameter (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Head developed by a centrifugal pump depends on its (A) Speed (B) Impeller diameter (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : C) Both (A) and (B)

In nuclear reactions, __________ number is conserved. (A) Mass (B) Atomic (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In nuclear reactions, __________ number is conserved. (A) Mass (B) Atomic (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate(B) Pressure(C) Both (A) & (B)(D) Neither (A) nor (B

Description : The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B

Description : Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Size reduction of moulding powders, waxes, resins & gums are done in a __________ mill. (A) Cage (B) Hammer (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Size reduction of moulding powders, waxes, resins & gums are done in a __________ mill. (A) Cage (B) Hammer (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Use of baffles in agitators help in minimising the __________ tendency. (A) Swirling (B) Vortexing (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Use of baffles in agitators help in minimising the __________ tendency. (A) Swirling (B) Vortexing (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The important dimensional group involved in the power requirement calculation in mixing operation is the __________ number. (A) Reynold's (B) Froude (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The important dimensional group involved in the power requirement calculation in mixing operation is the __________ number. (A) Reynold's (B) Froude (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Separation of isotopes is generally done using a/an __________ centrifuge. (A) Ultra (B) Disk-bowl (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Separation of isotopes is generally done using a/an __________ centrifuge. (A) Ultra (B) Disk-bowl (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Ultra

Corrosion involves exchange of electrons in __________ corrosion. (A) Chemical (B) Electrochemical (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Corrosion involves exchange of electrons in __________ corrosion. (A) Chemical (B) Electrochemical (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The damage/deterioration of metals by the __________ action of fluids is called 'erosion'. (A) Abrasive (B) Corrosive (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The damage/deterioration of metals by the __________ action of fluids is called 'erosion'. (A) Abrasive (B) Corrosive (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Abrasive

Dry bulb temperature of unsaturated air is more than its __________ temperature. (A) Dew point (B) Wet bulb (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Description : Dry bulb temperature of unsaturated air is more than its __________ temperature. (A) Dew point (B) Wet bulb (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Last Answer : (C) Both 'a' & 'b

Diffusion in concentrated solutions differs from that in dilute solutions, because of the change in the __________ with the concentration of the solution. (A) Degree of ideality (B) Viscosity (C) Both 'a '& 'b' (D) Neither 'a' nor 'b'

Description : Diffusion in concentrated solutions differs from that in dilute solutions, because of the change in the __________ with the concentration of the solution. (A) Degree of ideality (B) Viscosity (C) Both 'a '& 'b' (D) Neither 'a' nor 'b'

Last Answer : (C) Both 'a '& 'b

In the desorption of highly soluble gas from the liquid, the main resistance will be in the __________ phase. (A) Gas (B) Liquid (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In the desorption of highly soluble gas from the liquid, the main resistance will be in the __________ phase. (A) Gas (B) Liquid (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Liquid

In the absorption of ammonia in water, the main resistance to absorption is by the __________ phase. (A) Liquid (B) Gas (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In the absorption of ammonia in water, the main resistance to absorption is by the __________ phase. (A) Liquid (B) Gas (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Gas

The ratio of Murphree plate efficiency to point efficiency is always > 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The ratio of Murphree plate efficiency to point efficiency is always > 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Plug

The ratio of Murphree plate efficiency to point efficiency is 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The ratio of Murphree plate efficiency to point efficiency is 1 in a __________ flow model. (A) Plug (B) Perfectly mixed (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Perfectly mixed

In case of constant underflow extraction operation, the __________ atall solute concentration.(A) Solids are drained to the same extent(B) Ratio of the insoluble to solution is constant(C) Both (A) & (B)(D) Neither (A) nor (B)

Description : In case of constant underflow extraction operation, the __________ atall solute concentration. (A) Solids are drained to the same extent (B) Ratio of the insoluble to solution is constant (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)