The most economical range of absorption factor is (A) 0 to 0.5 (B) 0 to 3 (C) 1.25 to 2 (D) 5 to 15

The most economical range of absorption factor is

(A) 0 to 0.5

(B) 0 to 3

(C) 1.25 to 2

(D) 5 to 15

by

1 Answer

Answer :

(C) 1.25 to 2

by

Related questions

The value of ‘L/mG’ ratio for economical absorption operation ranges from (A) 0.5 to 0.8 (B) 0.8 to 1.2 (C) 1.25 to 2.0 (D) 2.5 to 3.5

Description : The value of ‘L/mG’ ratio for economical absorption operation ranges from (A) 0.5 to 0.8 (B) 0.8 to 1.2 (C) 1.25 to 2.0 (D) 2.5 to 3.5

Last Answer : (C) 1.25 to 2.0

The normal range of filtration factor in an adult is (A) 0.10–0.15 (B) 0.16–0.21 (C) 0.25–0.30 (D) 0.35–0.40

Description : The normal range of filtration factor in an adult is (A) 0.10–0.15 (B) 0.16–0.21 (C) 0.25–0.30 (D) 0.35–0.40

Last Answer : Answer : B

The economical diesel fuels have got octane rating varying from a) 30 to 50 b) 30 to 60 c) 20 to 30 d) 25 to 30

Description : The economical diesel fuels have got octane rating varying from a) 30 to 50 b) 30 to 60 c) 20 to 30 d) 25 to 30

Last Answer : b) 30 to 60

It is always economical to improve the power factor of an electric installation to

Description : It is always economical to improve the power factor of an electric installation to (a) zero (b) unity (c) a little less than unity (d) a little more than unity 

Last Answer : To  a  little  less  than  unity.

For a consumer the most economical power factor is generally?

Last Answer : For a consumer the most economical power factor is generally 0.95 lagging .

What is the normal range of exit cone angle of a Venturimeter? (A) 2 to 5 (B) 7 to 15 (C) 15 to 25 (D) >25

Description : What is the normal range of exit cone angle of a Venturimeter? (A) 2 to 5 (B) 7 to 15 (C) 15 to 25 (D) >25

Last Answer : (B) 7 to 15

High relative humidity decreases the evaporative process and as the temperature is increased, the relative humidity decreases. The comfort range for human body is the ambient temperature of 22 to 27°C with relative humidity ranging from __________ percent. (A) 5 to 10 (B) 15 to 25 (C) 45 to 50 (D) 75 to 80

Description : High relative humidity decreases the evaporative process and as the temperature is increased, the relative humidity decreases. The comfort range for human body is the ambient temperature of 22 to 27°C with relative humidity ranging from __________ ... to 10 (B) 15 to 25 (C) 45 to 50 (D) 75 to 80

Last Answer : (C) 45 to 50

Desirable value of absorption factor in an absorber is (A) 1 (B) < 1 (C) > 1 (D) 0.5

Description : Desirable value of absorption factor in an absorber is (A) 1 (B) < 1 (C) > 1 (D) 0.5

Last Answer : (C) > 1

In natural gas, the C/H ratio (by weight) varies in the range of(A) 3-4(B) 8-10(C) 15-17(D) 20-25

Description : In natural gas, the C/H ratio (by weight) varies in the range of (A) 3-4 (B) 8-10 (C) 15-17 (D) 20-25

Last Answer : (A) 3-4

The ratio of the depth of flow to the hydraulic radius for the most economical trapezoidal section, in open channel flow is (A) 0.5 (B) 1 (C) 1.5 (D) 2

Description : The ratio of the depth of flow to the hydraulic radius for the most economical trapezoidal section, in open channel flow is (A) 0.5 (B) 1 (C) 1.5 (D) 2

Last Answer : (D) 2

Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. A 25.62 rad/sec B 20.78 rad/sec C 14.4 rad/sec D 15.33 rad/sec

Description : Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. A 25.62 rad/sec B 20.78 rad/sec C 14.4 rad/sec D 15.33 rad/sec

Last Answer : A 25.62 rad/sec

Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. A 21 rad/sec B 25.62 rad/sec C 20.22 Hz D 3.15 Hz

Description : Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. A 21 rad/sec B 25.62 rad/sec C 20.22 Hz D 3.15 Hz

Last Answer : B 25.62 rad/sec

Calculate natural frequency of damped vibration, if damping factor is 0.52 and A natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. ( A )25.62 rad/sec ( B )20.78 rad/sec ( C )14.4 rad/sec ( D )15.33 rad/sec

Description : Calculate natural frequency of damped vibration, if damping factor is 0.52 and A natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. ( A )25.62 rad/sec ( B )20.78 rad/sec ( C )14.4 rad/sec ( D )15.33 rad/sec

Last Answer : ( A )25.62 rad/sec

Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequ the system is 30 rad/sec which consists of machine supported on springs and dashpots. a. 25.62 rad/secb. 20.78 rad/sec c. 14.4 rad/sec d. 15.33 rad/sec

Description : Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequ the system is 30 rad/sec which consists of machine supported on springs and dashpots. a. 25.62 rad/secb. 20.78 rad/sec c. 14.4 rad/sec d. 15.33 rad/sec

Last Answer : a. 25.62 rad/sec

A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the force exerted by the jet on the plate would be in the range a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Description : A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the ... a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Last Answer : a. 15 - 20 kg

Find the range of the given data : 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11, 20 -Maths 9th

Description : Find the range of the given data : 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11, 20 -Maths 9th

Last Answer : Here, the minimum and maximum values of given data are 6 and 32 respectively. Range = 32 – 6 = 26

Find the range of the given data : 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11, 20 -Maths 9th

Description : Find the range of the given data : 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11, 20 -Maths 9th

Last Answer : Here, the minimum and maximum values of given data are 6 and 32 respectively. Range = 32 – 6 = 26

The range of the data 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11 and 20 is -Maths 9th

Description : The range of the data 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11 and 20 is -Maths 9th

Last Answer : In conclusion, the range of data 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11, and 20 is 26.

The range of the data 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11 and 20 is -Maths 9th

Description : The range of the data 25, 18, 20, 22, 16, 6, 17, 15, 12, 30, 32, 10, 19, 8, 11 and 20 is -Maths 9th

Last Answer : (d) In a given data, maximum value = 32 and minimum value = 6 We know, range of the data = maximum value – minimum value = 32 – 6 = 26 Hence, the range of the given data is 26.

Find the range of the data : 14, 15, 16, 18, 19, 25, 30, 41, 26, 16, 13, 18, 20 and 26.

Description : Find the range of the data : 14, 15, 16, 18, 19, 25, 30, 41, 26, 16, 13, 18, 20 and 26.

Last Answer : Find the range of the data : 14, 15, 16, 18, 19, 25, 30, 41, 26, 16, 13, 18, 20 and 26.

In Pakistan, yield of potato range between : a. 10-15 ton b. 15-20 ton c. 20-25 ton d. 25-30 ton

Description : In Pakistan, yield of potato range between : a. 10-15 ton b. 15-20 ton c. 20-25 ton d. 25-30 ton

Last Answer : 20-25 ton

High seed germination in cucumber occurs under temperature range of: a. 20-25°C b. 25-30°C c. 15-25°C d. None of above

Description : High seed germination in cucumber occurs under temperature range of: a. 20-25°C b. 25-30°C c. 15-25°C d. None of above

Last Answer : 20-25°C

For economical consideration, the ratio of overall depth to width should be [ A ] less than 1.5 [ B ] between 1.50 and 2.0 [ C ] between 2.0 to 2.5 [ D ] greater than 2.5

Description : For economical consideration, the ratio of overall depth to width should be [ A ] less than 1.5 [ B ] between 1.50 and 2.0 [ C ] between 2.0 to 2.5 [ D ] greater than 2.5

Last Answer : [ B ] between 1.50 and 2.0

For economical consideration, the ratio of overall depth to width should be [ A ] less than 1.5 [ B ] between 1.50 and 2.0 [ C ] between 2.0 to 2.5 [ D ] greater than 2.5

Description : For economical consideration, the ratio of overall depth to width should be [ A ] less than 1.5 [ B ] between 1.50 and 2.0 [ C ] between 2.0 to 2.5 [ D ] greater than 2.5

Last Answer : [ B ] between 1.50 and 2.0

Vibrating screens have capacity in the range of __________ tons/ft 2 .mm mesh size. (A) 0.2 to 0.8 (B) 5 to 25 (C) 50 to 100 (D) 100 to 250

Description : Vibrating screens have capacity in the range of __________ tons/ft 2 .mm mesh size. (A) 0.2 to 0.8 (B) 5 to 25 (C) 50 to 100 (D) 100 to 250

Last Answer : (A) 0.2 to 0.8

‘L/mG’ is the expression for (A) Absorption factor (B) Brinkman number (C) Slope of operating line in absorber (D) Slope of operating line in stripper

Description : ‘L/mG’ is the expression for (A) Absorption factor (B) Brinkman number (C) Slope of operating line in absorber (D) Slope of operating line in stripper

Last Answer : (A) Absorption factor

In a packed absorption tower, if the equilibrium and operating lines are both straight lines, then the ratio, HETP/HTUOG __________ the absorption factor. (A) Increases with increase in (B) Is one at unity value of (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : In a packed absorption tower, if the equilibrium and operating lines are both straight lines, then the ratio, HETP/HTUOG __________ the absorption factor. (A) Increases with increase in (B) Is one at unity value of (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

. The absorption factor is defined as (where, L = liquid flow rate, G = gas flow rate and, m = slope of the equilibrium line). (A) L/mG (B) G/mL (C) mL/G (D) LG/m

Description : . The absorption factor is defined as (where, L = liquid flow rate, G = gas flow rate and, m = slope of the equilibrium line). (A) L/mG (B) G/mL (C) mL/G (D) LG/m

Last Answer : (A) L/mG

Absorption factor method is used to calculate the number of ideal stages, when (A) Operating line lies above the equilibrium line (B) Operating line lies below the equilibrium line (C) Both operating and equilibrium lines are parallel (D) Pressure drop in the column is very high

Description : Absorption factor method is used to calculate the number of ideal stages, when (A) Operating line lies above the equilibrium line (B) Operating line lies below the equilibrium line (C) Both operating and equilibrium lines are parallel (D) Pressure drop in the column is very high

Last Answer : (C) Both operating and equilibrium lines are parallel

The reciprocal of stripping factor is termed as (A) Selectivity index (B) Relative volatility (C) Absorption factor (D) Murphree efficiency

Description : The reciprocal of stripping factor is termed as (A) Selectivity index (B) Relative volatility (C) Absorption factor (D) Murphree efficiency

Last Answer : (C) Absorption factor

To increase the absorption factor, (where, G = gas flow rate, S = solvent flow rate) (A) Increase both 'G' and 'S' (B) Decrease both 'G' and 'S' (C) Increase 'S' and decrease 'G' (D) Increase 'G' and decrease 'S'

Description : To increase the absorption factor, (where, G = gas flow rate, S = solvent flow rate) (A) Increase both 'G' and 'S' (B) Decrease both 'G' and 'S' (C) Increase 'S' and decrease 'G' (D) Increase 'G' and decrease 'S'

Last Answer : (C) Increase 'S' and decrease 'G

Absorption factor, for a fixed degree of absorption from a fixed amount of gas should be (A) 1 (B) > 1 (C) < 1 (D) ≤ 1

Description : Absorption factor, for a fixed degree of absorption from a fixed amount of gas should be (A) 1 (B) > 1 (C) < 1 (D) ≤ 1

Last Answer : (B) > 1

The expression, y(1 - x)/x(1 - y) is for (A) Absorption factor (B) Relative volatility (C) Selectivity (D) Murphree efficiency

Description : The expression, y(1 - x)/x(1 - y) is for (A) Absorption factor (B) Relative volatility (C) Selectivity (D) Murphree efficiency

Last Answer : (B) Relative volatility

Pick out the wrong statement: (A) Absorption factor is constant, when the equilibrium and operating lines are straight (B) In case of a stripper, the equilibrium curve is always below the operating line (C) In case of an absorber, the operating line is always above the equilibrium curve (D) In the absorption of low solubility gases, the liquid film is the controlling resistance

Description : Pick out the wrong statement: (A) Absorption factor is constant, when the equilibrium and operating lines are straight (B) In case of a stripper, the equilibrium curve is always below ... (D) In the absorption of low solubility gases, the liquid film is the controlling resistance

Last Answer : (B) In case of a stripper, the equilibrium curve is always below the operating line

If Q is discharge is cubic metres per sec and D is the economical diameter of the pipe. According to Lea (A) D = 0.67 to 0.87 Q (B) D = 0.77 to 0.97 Q (C) D = 0.97 to 1.22 Q (D) D = 1.22 to 1.33 Q

Description : If Q is discharge is cubic metres per sec and D is the economical diameter of the pipe. According to Lea (A) D = 0.67 to 0.87 Q (B) D = 0.77 to 0.97 Q (C) D = 0.97 to 1.22 Q (D) D = 1.22 to 1.33 Q

Last Answer : (C) D = 0.97 to 1.22 Q

For calculation of economical diameter D of a pipe in metres for a discharge Q to be pumped in cumecs, Lea suggested the empirical formula (A) D = 0.22 Q (B) D = 1.22 Q (C) D = 2.22 Q (D) D = 3.22 Q

Description : For calculation of economical diameter D of a pipe in metres for a discharge Q to be pumped in  cumecs, Lea suggested the empirical formula  (A) D = 0.22 Q (B) D = 1.22 Q (C) D = 2.22 Q (D) D = 3.22 Q

Last Answer : (B) D = 1.22 Q

To pump water from a water reservoir 3 m deep and maximum water level at 135 m, a pump is installed to lift water up to R.L. 175 m at a constant rate of 36,00,000 litres per hour. If the length of the pipe is 1506 m and f = 0.01, ignoring other minor losses and assuming the economical diameter from Lea's formula D = 1.2 Q, the water horse power of the pump is (A) 400 (B) 450 (C) 500(D) 600

Description : To pump water from a water reservoir 3 m deep and maximum water level at 135 m, a pump is  installed to lift water up to R.L. 175 m at a constant rate of 36,00,000 litres per hour. If the length  of the ... the water horse power of the pump is  (A) 400  (B) 450  (C) 500 (D) 600

Last Answer : (D) 600

Best side slope for most economical trapezoidal section in open channel flow, wherein side slopes are defined by : X horizontal to 1 vertical, is when X equals : (a) 0.404 (b) 0.500 (c) 0.577 (d) 0.673

Description : Best side slope for most economical trapezoidal section in open channel flow, wherein side slopes are defined by : X horizontal to 1 vertical, is when X equals : (a) 0.404 (b) 0.500 (c) 0.577 (d) 0.673

Last Answer : (c) 0.577

Pick out the wrong statement. (A) Close circuit grinding is more economical than open circuit grinding (B) Cod oil, beef tallow or aluminium stearates are used as grinding aids in cement 'industries' (C) The equipment used for the removal of traces of solids from a liquid is called a classifier (D) Size enlargement is a mechanical operation exemplified by medicinal tablet making

Description : Pick out the wrong statement. (A) Close circuit grinding is more economical than open circuit grinding (B) Cod oil, beef tallow or aluminium stearates are used as grinding aids in cement ... is called a classifier (D) Size enlargement is a mechanical operation exemplified by medicinal tablet making

Last Answer : (C) The equipment used for the removal of traces of solids from a liquid is called a classifier

In closed circuit grinding as compared to open circuit grinding, the (A) Specific surface of product is more (B) Product has lesser size uniformity (C) Production rate at a given limiting size is lower (D) Operation is economical

Description : In closed circuit grinding as compared to open circuit grinding, the (A) Specific surface of product is more (B) Product has lesser size uniformity (C) Production rate at a given limiting size is lower (D) Operation is economical

Last Answer : (D) Operation is economical

Vacuum is generally maintained in the vapour space of an evaporator mainly to (A) Get economical temperature difference by using moderate pressure steam (B) Facilitate forward feeding in multiple effect evaporation (C) Concentrate heat sensitive materials (D) Achieve very high concentration of the final product

Description : Vacuum is generally maintained in the vapour space of an evaporator mainly to (A) Get economical temperature difference by using moderate pressure steam (B) Facilitate forward ... (C) Concentrate heat sensitive materials (D) Achieve very high concentration of the final product

Last Answer : (A) Get economical temperature difference by using moderate pressure steam

For large heat transfer area requirement, shell and tube heat exchanger is preferred, because it (A) Occupies smaller space (B) Is more economical (C) Is easy to operate and maintain (D) All (A), (B) and (C)

Description : For large heat transfer area requirement, shell and tube heat exchanger is preferred, because it (A) Occupies smaller space (B) Is more economical (C) Is easy to operate and maintain (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Ceramic recuperators (made of SiC) is economical, only when used for preheating combustion air above __________ °C. (A) 250 (B) 650 (C) 850 (D) 1000

Description : Ceramic recuperators (made of SiC) is economical, only when used for preheating combustion air above __________ °C. (A) 250 (B) 650 (C) 850 (D) 1000

Last Answer : (B) 650

The most economical flow control valve for use with large diameter pipes is a (A) Butterfly valve (B) Globe valve (C) Needle valve (D) None of these

Description : The most economical flow control valve for use with large diameter pipes is a (A) Butterfly valve (B) Globe valve (C) Needle valve (D) None of these

Last Answer : (A) Butterfly valve

Which is the most practical and economical method for removal of suspended solid matter from polluted water? (A) Sedimentation (B) Skimming off (C) Chlorination (D) Biological oxidation

Description : Which is the most practical and economical method for removal of suspended solid matter from polluted water? (A) Sedimentation (B) Skimming off (C) Chlorination (D) Biological oxidation

Last Answer : (A) Sedimentation

Pick out the wrong statement pertaining to nitric acid. (A) About 90% of nitric acid is manufactured by Ostwald's process (B) It is a strong mono basic acid which reacts with almost all the metals except noble metals (C) Yellow color of impure nitric acid is because of dissolved oxides of nitrogen (mainly NO2 ) (D) Arc process of nitric acid manufacture is economical as compared to Ostwald's process

Description : Pick out the wrong statement pertaining to nitric acid. (A) About 90% of nitric acid is manufactured by Ostwald's process (B) It is a strong mono basic acid which reacts with almost all the ... (mainly NO2 ) (D) Arc process of nitric acid manufacture is economical as compared to Ostwald's process

Last Answer : (D) Arc process of nitric acid manufacture is economical as compared to Ostwald's process

The most economical pulp for the production of newsprint would be the __________ pulp. (A) Ground-wood (B) Sulphate (C) Sulphite (D) Semi-chemical

Description : The most economical pulp for the production of newsprint would be the __________ pulp. (A) Ground-wood (B) Sulphate (C) Sulphite (D) Semi-chemical

Last Answer : (A) Ground-wood

Assertion: Light-harvesting complexes (LHC) on thylkoid membrane broaden the range of light absorption: Reason: They transfer electrons to reaction ce

Description : Assertion: Light-harvesting complexes (LHC) on thylkoid membrane broaden the range of light absorption: Reason: They transfer electrons to reaction ce

Last Answer : Assertion: Light-harvesting complexes (LHC) on thylkoid membrane broaden the range of light absorption: ... . If both Assertion and Reason are false.

name the pigment(s) which increases the absorption range for photosynthesis.

Description : name the pigment(s) which increases the absorption range for photosynthesis.

Last Answer : name the pigment(s) which increases the absorption range for photosynthesis.