It is always economical to improve the power factor of an electric installation to

It is always economical to improve the power factor of an electric installation to (a) zero (b) unity (c) a little less than unity (d) a little more than unity 
by

1 Answer

Answer :

To  a  little  less  than  unity.
by

Related questions

For a consumer the most economical power factor is generally?

Last Answer : For a consumer the most economical power factor is generally 0.95 lagging .

Capacitors can be used in electric distribution systems to improve power factor. This is accomplished by seesawing energy between the capacitor and the _____________. A. generator B. inductive loads C. resistive loads D. all of the above

Description : Capacitors can be used in electric distribution systems to improve power factor. This is accomplished by seesawing energy between the capacitor and the _____________. A. generator B. inductive loads C. resistive loads D. all of the above

Last Answer : Answer: B

An _____________is a network of electrical components used to supply, transfer and use electric power:

Description : An _____________is a network of electrical components used to supply, transfer and use electric power:  (A) Electric power system (B) Electric power (C) All of the above (D) None of the above

Last Answer : An Electric power system is a network of electrical components used to supply, transfer and use electric power.

The storage battery generally used in electric power stations is

Description : The storage battery generally used in electric power stations is  (1) zinc carbon battery (2) lead acid battery (3) nickel cadmium battery (4) lithium -ion battery

Last Answer : The storage battery generally used in electric power stations is lead acid battery 

Bundled conductors are employed to improve the

Description : Bundled conductors are employed to improve the.  A) Appearance of the transmission line B) Mechanical stability of the line C) Current carrying capacity of the line D) Corona performance of the line

Last Answer : B

A 3-phase 11 kV generator feeds power to a constant power unity power factor load of 100 MW through a

Description : A 3-phase 11 kV generator feeds power to a constant power unity power factor load of 100 MW through a 3-phase transmission line. The line-to line voltage at the terminals of the machine is maintained constant at 11 kV. The per ... 11 kV is  (A) 100 MVAR (B) 10.1 MVAR (C) -100 MVAR (D) -10.1 MVAR

Last Answer : A 3-phase 11 kV generator feeds power to a constant power unity power factor load of 100 MW through a 3-phase transmission line. The line-to line voltage at the terminals of the machine is maintained ... load to increase the line-to-line voltage at the load terminals to 11 kV is -10.1 MVAR

A 50 Hz, 4-pole, 500 MVA, 22 kV turbo-generator is delivering rated megavolt amperes at 0.8 power factor.

Description : A 50 Hz, 4-pole, 500 MVA, 22 kV turbo-generator is delivering rated megavolt amperes at 0.8 power factor. Suddenly a fault occurs reducing in electric power output by 40%. Neglect losses and assume constant power input to the ... the time of fault will be  (A) 1.528 (B) 1.018 (C) 0.848 (D) 0.509

Last Answer : A 50 Hz, 4-pole, 500 MVA, 22 kV turbo-generator is delivering rated megavolt amperes at 0.8 power factor. Suddenly a fault occurs reducing in electric power output by 40%. Neglect losses and assume ... the shaft. The accelerating torque in the generator in MNm at the time of fault will be 1.018 

A transformer has negative voltage regulation when its load power factor is

Description : A transformer has negative voltage regulation when its load power factor is   (1) Zero (2) Unity (3) Leading (4) Lagging

Last Answer : 0

Power station having Load factor = 70%, capacity factor = 50%, used factor = 60%, maximum demand = 20MW

Description : Power station having Load factor = 70%, capacity factor = 50%, used factor = 60%, maximum demand = 20MW then annual energy production is  (1) 122.8 GWh (2) 198.55 GWh (3) 128.2 GWh (4) 188.82 GWh

Last Answer : Power station having Load factor = 70%, capacity factor = 50%, used factor = 60%, maximum demand = 20MW then annual energy production is 122.8 GWh

The benefit of power factor correction in a power system is

Description : The benefit of power factor correction in a power system is (A) lower power consumption (B) increased demand charge (C) reduced load carrying capabilities in existing lines (D) reduced voltage profile

Last Answer : The benefit of power factor correction in a power system is lower power consumption

A 3-phase, 11 kv, 50 Hz, 200 kW load has a power factor of 0.8 lag. ...

Description : A 3-phase, 11 kv, 50 Hz, 200 kW load has a power factor of 0.8 lag. A delta connected 3-phase capacitor is used to improve the power factor to unity. The capacitance perphase of the capacitor in micro-farads is?

Last Answer : A 3-phase, 11 kv, 50 Hz, 200 kW load has a power factor of 0.8 lag. A delta connected 3-phase capacitor is used to improve the power factor to unity. The capacitance perphase of the capacitor in micro-farads is 1.316.

Which are more economical, gas or electric water heaters?

Description : Which are more economical, gas or electric water heaters?

Last Answer : Gas heaters can be more economical. If there is a high supply of gas in the area it would have cheaper prices. Electric can be cheaper in other areas though.

Tungsten is used for the manufacture of the filament of an electric bulb, because – (1) It is a good conductor (2) It is economical (3) It is malleable (4) It has a very high melting point

Description : Tungsten is used for the manufacture of the filament of an electric bulb, because – (1) It is a good conductor (2) It is economical (3) It is malleable (4) It has a very high melting point

Last Answer : (4) It has a very high melting point Explanation: Tungsten is used because it has the highest melting point of all the metallic elements. It melts at 3410 degrees Celsius. When current passes ... bulb. The first successful light bulb filaments were made of carbon (from carbonized paper or bamboo).

Out of electric heater and heat pump, which is economical in operation ?

Description : Out of electric heater and heat pump, which is economical in operation ?

Last Answer : Heat pump.

Tungsten is used for the manufacture of the filament of an electric bulb, because (1) It is a good conductor (2) It is economical (3) It is malleable (4) It has a very high melting point

Description : Tungsten is used for the manufacture of the filament of an electric bulb, because (1) It is a good conductor (2) It is economical (3) It is malleable (4) It has a very high melting point

Last Answer : It has a very high melting point

The most economical range of absorption factor is (A) 0 to 0.5 (B) 0 to 3 (C) 1.25 to 2 (D) 5 to 15

Description : The most economical range of absorption factor is (A) 0 to 0.5 (B) 0 to 3 (C) 1.25 to 2 (D) 5 to 15

Last Answer : (C) 1.25 to 2

The use of a freight forwarder A)is not always economical for a small firm. B)usually increases transit time and shipping costs. C)usually increases transit time and sometimes lowers shipping costs. D)lowers shipping costs for a large firm. E)usually reduces transit time.

Description : The use of a freight forwarder A)is not always economical for a small firm. B)usually increases transit time and shipping costs. C)usually increases transit time and sometimes lowers shipping costs. D)lowers shipping costs for a large firm. E)usually reduces transit time.

Last Answer : E)usually reduces transit time.

What is the factor of safety used for current ratings in a power installation?

Description : What is the factor of safety used for current ratings in a power installation?

Last Answer : 2 is the factor of safety used for current ratings in a power installation.

The primary reason for low power factor is supply system is due to installation of?

Last Answer : The primary reason for low power factor is supply system is due to installation of induction motors.

Give broad classification of maintenance with meaning of each type. State the factors on which ideal maintenance of electric rolling stock is judged. Give any two means to improve any one factor of these.

Description : Give broad classification of maintenance with meaning of each type. State the factors on which ideal maintenance of electric rolling stock is judged. Give any two means to improve any one factor of these.

Last Answer : Ans: Classification: 1) Running repairs - carried out when the equipment has actually failed.  2) Trouble shooting - involves rectification of the defects by making temporary repair so that ... and operating staff , coordination of work at shed , availability of standby and quality spares 

Load factor is the

Description : Load factor is the  (1) Ratio of maximum load on the station to sum of consumer's maximum load.  (2) Ratio of average demand to maximum demand.  (3) Factor used for increasing load.  (4) Reciprocal of (1).

Last Answer : Load factor is the Ratio of average demand to maximum demand. 

The knowledge of diversity factor helps in computing

Description : The knowledge of diversity factor helps in computing  (1) Plant capacity (2) Average load (3) Units (kWh) generated (4) Peak demand

Last Answer : The knowledge of diversity factor helps in computing Plant capacity

The load duration curve for unity load factor will be of

Description : The load duration curve for unity load factor will be of  (1) Rectangular shape (2) Triangular shape (3) L -shape (4) I -shape

Last Answer : The load duration curve for unity load factor will be of Rectangular shape

A generating st ation has a maximum, demand of 20 mW, load factor of 60%,...

Description : A generating st ation has a maximum, demand of 20 mW, load factor of 60%, a plant capacity factor of 50% and a plant Use factor of 72%. What is the reserve capacity of the plant, if the plant, while running as per schedule, were fully loaded?

Last Answer : 5 MW is the reserve capacity of the plant, if the plant, while running as per schedule, were fully loaded.

A generating station has a maximum demand of 50 Mw, a load factor of 60%, a plant capacity factor...

Description : A generating station has a maximum demand of 50 Mw, a load factor of 60%, a plant capacity factor of 45% and if the plant while running as per schedule, were fully loaded. The daily energy produced will be

Last Answer : A generating station has a maximum demand of 50 Mw, a load factor of 60%, a plant capacity factor of 45% and if the plant while running as per schedule, were fully loaded. The daily energy produced will be 720 MW.

A consumer consume. 600 kWh per day at a load factor of 0.40....

Description : A consumer consumes. 600 kWh per day at a load factor of 0.40. If the consumer increases the load factor of 0.70 without increasing the maximum demand, what is the consumption of energy in kWh?

Last Answer : A consumer consume. 600 kWh per day at a load factor of 0.40. If the coneumer increases the load factor of 0.70 without increasing the maximum demand, 1050 kWh is the consumption of energy in kWh.

The steady state stability limit as compared to the transient state stability limit is always

Description : The steady state stability limit as compared to the transient state stability limit is always

Last Answer : The steady state stability limit as compared to the transient state stability limit is always Greater

Temporary Electric Installation What ?

Last Answer : short Of time For Electricity Of use On purpose Complete Temporary On the basis That Electrification Arrangement To do Yes , him Temporary Electric Installation Says.

What is the typical cost of installation of an electric garage door opener?

Description : What is the typical cost of installation of an electric garage door opener?

Last Answer : From what I gather, a typical cost of an electric garage door opener is around $150. However, with installation, it could run you a total cost of about $350 or so.

Electric Fence Installation?

Description : Electric Fence Installation?

Last Answer : form_title=Install an Electric Fence form_header=Keep animals inside the the boundary lines of your property safely and easily with an electric fence. What are you going to use this fence for?=_ What type of animals ... the property?=_ Do you want the fence above or below ground?= () Above () Below

State any eight safety precautions to be followed while working with an electric installation.

Description : State any eight safety precautions to be followed while working with an electric installation. 

Last Answer : Wear safety boot and use right tool for the right job

Are natural gas generators economical to power a house?

Description : Are natural gas generators economical to power a house?

Last Answer : Home power generator is good solution during snowfall. Different kind of power generators are available. these generators basically varies in sizes depending upon the size of the home and the electrical appliances you want to lit on. choose the best one and buy. You can find them @ www.Amazon.com/

The iron ore deposits of Dammel-Nissar is of high quality but why it is not excavated? A. Due to lack of men power B. Ore deposits is in low quantity C. Ore lies under hard rocks D. Not economical due to transportation problem

Description : The iron ore deposits of Dammel-Nissar is of high quality but why it is not excavated? A. Due to lack of men power B. Ore deposits is in low quantity C. Ore lies under hard rocks D. Not economical due to transportation problem

Last Answer : ANSWER: D

The iron ore deposits of Dammel-Nissar is of high quality but why it is not excavated? A. Due to lack of men power B. Ore deposits is in low quantity C. Ore lies under hard rocks D. Not economical due to transportation problem

Description : The iron ore deposits of Dammel-Nissar is of high quality but why it is not excavated? A. Due to lack of men power B. Ore deposits is in low quantity C. Ore lies under hard rocks D. Not economical due to transportation problem

Last Answer : ANSWER: D

To pump water from a water reservoir 3 m deep and maximum water level at 135 m, a pump is installed to lift water up to R.L. 175 m at a constant rate of 36,00,000 litres per hour. If the length of the pipe is 1506 m and f = 0.01, ignoring other minor losses and assuming the economical diameter from Lea's formula D = 1.2 Q, the water horse power of the pump is (A) 400 (B) 450 (C) 500(D) 600

Description : To pump water from a water reservoir 3 m deep and maximum water level at 135 m, a pump is  installed to lift water up to R.L. 175 m at a constant rate of 36,00,000 litres per hour. If the length  of the ... the water horse power of the pump is  (A) 400  (B) 450  (C) 500 (D) 600

Last Answer : (D) 600

Which one of the major inputs for the economical developement of any country. A) management. B) Energy. C) Power. D) planning

Description : Which one of the major inputs for the economical developement of any country. A) management. B) Energy. C) Power. D) planning

Last Answer : ENERGY

The expanded production of fertilizers, textiles & buildings require some A. power production B. domestic production of the necessary capital goods C. economical growth D. none of these

Description : The expanded production of fertilizers, textiles & buildings require some A. power production B. domestic production of the necessary capital goods C. economical growth D. none of these

Last Answer : B. domestic production of the necessary capital goods

'Six-tenth factor' rule is used for estimating the (A) Equipment installation cost (B) Equipment cost by scaling (C) Cost of piping (D) Utilities cost

Description : 'Six-tenth factor' rule is used for estimating the (A) Equipment installation cost (B) Equipment cost by scaling (C) Cost of piping (D) Utilities cost

Last Answer : (B) Equipment cost by scaling

The mechanical splice is best suited for ∙ A. quicker installation under ideal condition ∙ B. minimum attenuation losses ∙ C. field service conditions ∙ D. situations in which cost of equipment is not a factor

Description : The mechanical splice is best suited for ∙ A. quicker installation under ideal condition ∙ B. minimum attenuation losses ∙ C. field service conditions ∙ D. situations in which cost of equipment is not a factor

Last Answer : D. situations in which cost of equipment is not a factor

Themechanicalsplice isbestsuited for a. quicker installation under ideal conditions b. minimum attenuation losses c. field service conditions d. situations in which cost of equipment is not a factor

Description : Themechanicalsplice isbestsuited for a. quicker installation under ideal conditions b. minimum attenuation losses c. field service conditions d. situations in which cost of equipment is not a factor

Last Answer : c. field service conditions

In order to improve the power factor ___ device is employed in the substation a) Synchronous condenser b) Synchronous reactor c) Series Capacitors d) None of the above

Description : In order to improve the power factor ___ device is employed in the substation a) Synchronous condenser b) Synchronous reactor c) Series Capacitors d) None of the above

Last Answer : Ans: A

List out the methods to improve the power factor of the induction motor.

Description : List out the methods to improve the power factor of the induction motor.

Last Answer : The power factor of the induction motor can be improved by reducing the magnetizing current and leakage reactance. The magnetizing current can be reduced by reducing the length of air gap. The ... stator & rotor slots, by providing short chorded winding and reducing the overhang in stator winding.

What is power factor? What are the ways to improve it?*

Description : What is power factor? What are the ways to improve it?*

Last Answer : Ration of true power and apparent power. Using capacitors and synchronous motors.

Why capacitors are used to improve power factor?

Description : Why capacitors are used to improve power factor?

Last Answer :  Capacitors generate reactive power instead of that drawn from source which is required by inductive loads.so it reduce the reactive current which is drawn from source to be drawn from capacitor.This control in Electric bills cost.

In a distribution system, in order to improve power factor, the synchronous capacitors are installed?

Last Answer : In a distribution system, in order to improve power factor, the synchronous capacitors are installed at the receiving end.

Can a synchronous condenser improve power factor?

Description : Can a synchronous condenser improve power factor?

Last Answer : Yes, synchronous condenser can improve power factor.

How does a capacitor improve power factor?

Description : How does a capacitor improve power factor?

Last Answer : Every circuit are usually more inductive than capacitive.it means that the current lags by voltage at small angle.hence we have to compensate this situation so we use Capacitor then this lag is compensate ... angle becomes low and the value of cos(phase angle) is increase and hence power also max.

A power system is subjected to a fault which makes the zero sequence component of current equal to zero

Description :  A power system is subjected to a fault which makes the zero sequence component of current equal to zero. The nature of fault current is: A) Double line to ground fault B) Line to line fault C) Line to ground fault D) Three-phase to ground fault

Last Answer :  A power system is subjected to a fault which makes the zero sequence component of current equal to zero. The nature of fault current is: Line to line fault

In the thermal power plants, the pressure in the working fluid cycle is developed by

Description : In the thermal power plants, the pressure in the working fluid cycle is developed by  (A) condenser (B) super heater (C) feed water pump (D) turbine

Last Answer : In the thermal power plants, the pressure in the working fluid cycle is developed by feed water pump