What is the normal range of exit cone angle of a Venturimeter? (A) 2 to 5 (B) 7 to 15 (C) 15 to 25 (D) >25

What is the normal range of exit cone angle of a Venturimeter?
(A) 2 to 5
(B) 7 to 15
(C) 15 to 25
(D) >25
by

1 Answer

Answer :

(B) 7 to 15
by

Related questions

The exit cone angle in case of a standard Venturimeter is __________ the entrance cone angle. (A) Smaller than (B) Greater than (C) Equal to (D) Either (A) or (B)

Description : The exit cone angle in case of a standard Venturimeter is __________ the entrance cone angle. (A) Smaller than (B) Greater than (C) Equal to (D) Either (A) or (B)

Last Answer : (A) Smaller than

Permanent loss in a Venturimeter is about __________ percent of the pressure drop in the upstream cone. (A) 1 (B) 10 (C) 40 (D) 70

Description : Permanent loss in a Venturimeter is about __________ percent of the pressure drop in the upstream cone. (A) 1 (B) 10 (C) 40 (D) 70

Last Answer : (B) 10

The length of the divergent cone in a Venturimeter is __________ that of the convergent cone. (A) Equal to (B) Double (C) Three to four times (D) Five to six times

Description : The length of the divergent cone in a Venturimeter is __________ that of the convergent cone. (A) Equal to (B) Double (C) Three to four times (D) Five to six times

Last Answer : Answer: Option C

A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the force exerted by the jet on the plate would be in the range a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Description : A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the ... a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Last Answer : a. 15 - 20 kg

Percentage of differential pressure lost in a Venturimeter with a tapering of 15° may be about (A) 1 (B) 10 (C) 25 (D) 50

Description : Percentage of differential pressure lost in a Venturimeter with a tapering of 15° may be about (A) 1 (B) 10 (C) 25 (D) 50

Last Answer : Option B

The normal range of filtration factor in an adult is (A) 0.10–0.15 (B) 0.16–0.21 (C) 0.25–0.30 (D) 0.35–0.40

Description : The normal range of filtration factor in an adult is (A) 0.10–0.15 (B) 0.16–0.21 (C) 0.25–0.30 (D) 0.35–0.40

Last Answer : Answer : B

For attaining maximum efficiency, a Francis turbine runner is so designed as to result in radial discharge at exit. This is done by : a) Providing runner vane angle at inlet as 90o b) Providing guide vane angle at inlet as 90o c) Providing runner vane angle at exit as 90o d) Designing for absolute velocity at outlet to be inclined at 90o to direction of vane there

Description : For attaining maximum efficiency, a Francis turbine runner is so designed as to result in radial discharge at exit. This is done by : a) Providing runner vane angle at inlet as 90o b) Providing ... 90o d) Designing for absolute velocity at outlet to be inclined at 90o to direction of vane there

Last Answer : d) Designing for absolute velocity at outlet to be inclined at 90o to direction of vane there

You are a bus driver at a station. 10 get on the bus and no one gets off. You drive 10 miles to another station where 3 people get on and 1 gets off. You drive another 10 miles only to get 25 people on and 5 people go off. Next you drive 3 miles while 12 people exit the bus. You drive back to the place knowing that a couple more stops along the way untill the ride is done. At the 2nd to last station 5 people get on and 2 get off. And at the last station (5.5 miles) 25 people get on for no reason and 1 gets off. What is the bus drivers eye color? -Riddles

Description : You are a bus driver at a station. 10 get on the bus and no one gets off. You drive 10 miles to another station where 3 people get on and 1 gets off. You drive another 10 miles only to get 25 ... 5 miles) 25 people get on for no reason and 1 gets off. What is the bus drivers eye color? -Riddles

Last Answer : Brown/blue/green (i don't know how i would put it though so if you guessed your eye color you got it right :) )

The most economical range of absorption factor is (A) 0 to 0.5 (B) 0 to 3 (C) 1.25 to 2 (D) 5 to 15

Description : The most economical range of absorption factor is (A) 0 to 0.5 (B) 0 to 3 (C) 1.25 to 2 (D) 5 to 15

Last Answer : (C) 1.25 to 2

High relative humidity decreases the evaporative process and as the temperature is increased, the relative humidity decreases. The comfort range for human body is the ambient temperature of 22 to 27°C with relative humidity ranging from __________ percent. (A) 5 to 10 (B) 15 to 25 (C) 45 to 50 (D) 75 to 80

Description : High relative humidity decreases the evaporative process and as the temperature is increased, the relative humidity decreases. The comfort range for human body is the ambient temperature of 22 to 27°C with relative humidity ranging from __________ ... to 10 (B) 15 to 25 (C) 45 to 50 (D) 75 to 80

Last Answer : (C) 45 to 50

If S denotes the area of the curved surface of a right circular cone of height h end semi-vertical angle a, then S equals -Maths 9th

Description : If S denotes the area of the curved surface of a right circular cone of height h end semi-vertical angle a, then S equals -Maths 9th

Last Answer : answer:

The semi-vertical angle of a cone remains constant. If its height increases by 2%, then find the approximate increase in its volume.

Description : The semi-vertical angle of a cone remains constant. If its height increases by 2%, then find the approximate increase in its volume.

Last Answer : The semi-vertical angle of a cone remains constant. If its height increases by 2%, then find the approximate increase in its volume.

Which one of the following statements is correct? (A) (B) The cone subtended by an area on the sphere at the centre, is called the solid angle (C) The solid angle is equal to the ratio of the area on the sphere and the square of the radius of the sphere (D) All of these

Description : Which one of the following statements is correct? (A) (B) The cone subtended by an area on the sphere at the centre, is called the solid angle (C) The solid angle is equal to the ratio of the area on the sphere and the square of the radius of the sphere (D) All of these

Last Answer : Answer: Option D

The maximum angle in which external light rays may strike the air/glass interface and still propagate down the fiber. ∙ A. Acceptance cone half-angle ∙ B. Acceptance cone ∙ C. Critical angle ∙ D. Angle of incidence

Description : The maximum angle in which external light rays may strike the air/glass interface and still propagate down the fiber. ∙ A. Acceptance cone half-angle ∙ B. Acceptance cone ∙ C. Critical angle ∙ D. Angle of incidence

Last Answer : A. Acceptance cone half-angle

What is TRUE in regard to the preparation of occlusal rests: A. Use an inverted cone bur B. Use a flat fissure bur C. Parallel to occlusal plane D. At right angle to the long axis of tooth E. None of the above

Description : What is TRUE in regard to the preparation of occlusal rests: A. Use an inverted cone bur B. Use a flat fissure bur C. Parallel to occlusal plane D. At right angle to the long axis of tooth E. None of the above

Last Answer : E. None of the above

swirl plate in the cone nozzle is provided to. a. Impart rotational motion to the liquid passing through it. b. To increase the droplet size. c. To decrease the droplet size. d. To increase the spray angle.

Description : swirl plate in the cone nozzle is provided to. a. Impart rotational motion to the liquid passing through it. b. To increase the droplet size. c. To decrease the droplet size. d. To increase the spray angle.

Last Answer : a. Impart rotational motion to the liquid passing through it.

Spary angle for fan nozzle and hollow cone nozzle a) 40-50 b) 50-60 c) 60-95 d) 100-150

Description : Spary angle for fan nozzle and hollow cone nozzle a) 40-50 b) 50-60 c) 60-95 d) 100-150

Last Answer : c) 60-95

Hollow cone nozzles employed on boom type of sprayers have spray angle between : A .30-60° B.40-60° C.60-95° D.100-150°

Description : Hollow cone nozzles employed on boom type of sprayers have spray angle between : A .30-60° B.40-60° C.60-95° D.100-150°

Last Answer : C.60-95°

Spray Angle for fan nozzles and hollow cone nozzle a) 40-50 b) 50-60 c) 60-95 d) 100-150

Description : Spray Angle for fan nozzles and hollow cone nozzle a) 40-50 b) 50-60 c) 60-95 d) 100-150

Last Answer : c) 60-95

Air enters an adiabatic compressor at 300K. The exit temperature for a compression ratio of 3, assuming air to be an ideal gas (Y = Cp/Cv = 7/5) and the process to be reversible, is (A) 300 × (32/7) (B) 300 × (33/5) (C) 300 × (333/7) (D) 300 × (35/7)

Description : Air enters an adiabatic compressor at 300K. The exit temperature for a compression ratio of 3, assuming air to be an ideal gas (Y = Cp/Cv = 7/5) and the process to be reversible, is (A) 300 × (32/7) (B) 300 × (33/5) (C) 300 × (333/7) (D) 300 × (35/7)

Last Answer : A) 300 × (32/7)

In natural gas, the C/H ratio (by weight) varies in the range of(A) 3-4(B) 8-10(C) 15-17(D) 20-25

Description : In natural gas, the C/H ratio (by weight) varies in the range of (A) 3-4 (B) 8-10 (C) 15-17 (D) 20-25

Last Answer : (A) 3-4

One day, you woke up in a place you havent seen before. There, you saw three rooms, all bring you to the exit. But, on those rooms, there were notes. It said: 1: room is filled with poison gas 2: room has more than 15 lions that havent eaten for 5 years 3: room is fiiled with snipers that would kill anyone who steps in You have no other choice, but to choose one of the three. Which room would be the way that could get you out without being harmed? -Riddles

Description : One day, you woke up in a place you havent seen before. There, you saw three rooms, all bring you to the exit. But, on those rooms, there were notes. It said: 1: room is filled with poison ... choose one of the three. Which room would be the way that could get you out without being harmed? -Riddles

Last Answer : 2. Because if the lions hadn't eaten for five years, they would be dead.

Steam undergoes isentropic expansion in a turbine from 5000 kPa and 400°C (entropy = 6.65 kJ/kg K) to 150 kPa) (entropy of saturated liquid = 1.4336 kJ/kg. K, entropy of saturated vapour = 7.2234 kJ/kg. K) The exit condition of steam is (A) Superheated vapour (B) Partially condensed vapour with quality of 0.9 (C) Saturated vapour (D) Partially condensed vapour with quality of 0.1

Description : Steam undergoes isentropic expansion in a turbine from 5000 kPa and 400°C (entropy = 6.65 kJ/kg K) to 150 kPa) (entropy of saturated liquid = 1.4336 kJ/kg. K, entropy of saturated vapour = 7.2234 ... vapour with quality of 0.9 (C) Saturated vapour (D) Partially condensed vapour with quality of 0.1

Last Answer : (A) Superheated vapour

function is used to transfer the control to end of a program which uses one argument( ) and takes value is zero for_ __ termination and non-zero for _termination: a. _ Exit( ) normal, abnormal b. Break, normal, abnormal Botha & b None of these

Description : function is used to transfer the control to end of a program which uses one argument( ) and takes value is zero for_ __ termination and non-zero for _termination: a. _ Exit( ) normal, abnormal b. Break, normal, abnormal Botha & b None of these

Last Answer : a. _ Exit( ) normal, abnormal

Long-term equilibrium of an Industry under a perfectly market conditions in achieved when (a) All the firms are earning normal profit ; (b) All the firms are in equilibrium ; (c) There is no further entry or exit of firms from the industry ; (d) All the three

Description : Long-term equilibrium of an Industry under a perfectly market conditions in achieved when (a) All the firms are earning normal profit ; (b) All the firms are in equilibrium ; (c) There is no further entry or exit of firms from the industry ; (d) All the three

Last Answer :  (d) All the three

Water flow rate in a pipe of 3.5 metres diameter can be most economically and conveniently measured by a/an (A) Pitot tube (B) Venturimeter (C) Orificemeter (D) Rotameter

Description : Water flow rate in a pipe of 3.5 metres diameter can be most economically and conveniently measured by a/an (A) Pitot tube (B) Venturimeter (C) Orificemeter (D) Rotameter

Last Answer : (A) Pitot tube

The angle of projection when the range is equal to the distance through which the particle would have fallen in order to acquire a velocity equal to the velocity of projection will be a.30? b.45? c.15? d.90? e.22

Description : The angle of projection when the range is equal to the distance through which the particle would have fallen in order to acquire a velocity equal to the velocity of projection will be a.30? b.45? c.15? d.90? e.22

Last Answer : c. 15?

For the maximum range of a projectile the angle of projection should be a.90? b.30? c.22 d.45? e.15?

Description : For the maximum range of a projectile the angle of projection should be a.90? b.30? c.22 d.45? e.15?

Last Answer : d. 45?

__________ is used for measuring the static pressure exerted on the wall by a fluid flowing parallel to the wall in a pipeline. (A) Venturimeter (B) Pressure gauge(C) Pitot tube(D) Orificemeter

Description : __________ is used for measuring the static pressure exerted on the wall by a fluid flowing parallel to the wall in a pipeline. (A) Venturimeter (B) Pressure gauge (C) Pitot tube (D) Orificemeter

Last Answer : (C) Pitot tube

Flow measurement in an open channel is done by a/an (A) Venturimeter (B) Orificemeter (C) Weir (D) Rotameter

Description : Flow measurement in an open channel is done by a/an (A) Venturimeter (B) Orificemeter (C) Weir (D) Rotameter

Last Answer : (C) Weir

Permanent pressure loss in a well designed Venturimeter is about __________ percent of the venturi differential. (A) 1 (B) 10 (C) 30 (D) 50

Description : Permanent pressure loss in a well designed Venturimeter is about __________ percent of the venturi differential. (A) 1 (B) 10 (C) 30 (D) 50

Last Answer : (A) 1

Venturimeter and orificemeter measures the __________ of the fluid. (A) Pressure (B) Maximum velocity (C) Average velocity (D) Point velocity

Description : Venturimeter and orificemeter measures the __________ of the fluid. (A) Pressure (B) Maximum velocity (C) Average velocity (D) Point velocity

Last Answer : (C) Average velocity

Which is not a variable head meter? (A) Venturimeter (B) Pitot tube (C) Rotameter (D) None of these

Description : Which is not a variable head meter? (A) Venturimeter (B) Pitot tube (C) Rotameter (D) None of these

Last Answer : (C) Rotameter

. It is possible to integrate an automatic flow controller to a (A) Flow nozzle (B) Venturimeter (C) Rotameter (D) None of these

Description : . It is possible to integrate an automatic flow controller to a (A) Flow nozzle (B) Venturimeter (C) Rotameter (D) None of these

Last Answer : (C) Rotameter

In case of Venturimeter, friction losses are about __________ percent of maximum velocity head. (A) 2 (B) 8 (C) 12 (D) 20

Description : In case of Venturimeter, friction losses are about __________ percent of maximum velocity head. (A) 2 (B) 8 (C) 12 (D) 20

Last Answer : (A) 2

The discharge through a Venturimeter depends upon (A) Pressure drop only (B) Its orientation (C) Co-efficient of contraction only (D) None of these

Description : The discharge through a Venturimeter depends upon (A) Pressure drop only (B) Its orientation (C) Co-efficient of contraction only (D) None of these

Last Answer : (A) Pressure drop only

Bernoulli’s equation does not apply to the functioning of a/an (A) Venturimeter (B) Orificemeter (C) pitot tube (D) None of these

Description : Bernoulli’s equation does not apply to the functioning of a/an (A) Venturimeter (B) Orificemeter (C) pitot tube (D) None of these

Last Answer : (D) None of these

Select the wrong statement pertaining to flow of an incompressible fluid through a Venturimeter. (A) For frictionless flow, the fluid pressure entering the venturi meter will be exactly equal to that leaving the Venturimeter(B) Discharge of fluid through a Venturimeter depends upon the gagedifference irrespective of the orientation of Venturimeter(C) Venturimeter occupies less space than an orificemeter(D) Venturimeter incurs less power loss compared to an equivalentorificemeter

Description : Select the wrong statement pertaining to flow of an incompressible fluid through a Venturimeter. (A) For frictionless flow, the fluid pressure entering the venturi meter will be exactly equal ... than an orificemeter (D) Venturimeter incurs less power loss compared to an equivalent orificemeter

Last Answer : (C) Venturimeter occupies less space than an orificemeter

A Venturimeter cannot be used for the direct measurement of (A) Datum difference in the stretch of pipe-flow (B) Pressure difference in the flow through pipeline(C) Friction loss in pipe flow(D) All (A), (B) and (C)

Description : A Venturimeter cannot be used for the direct measurement of (A) Datum difference in the stretch of pipe-flow (B) Pressure difference in the flow through pipeline (C) Friction loss in pipe flow (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The pressure head of a flow meter remains constant for (A) Venturimeter (B) Orificemeter (C) Rotameter (D) Pitot tube

Description : The pressure head of a flow meter remains constant for (A) Venturimeter (B) Orificemeter (C) Rotameter (D) Pitot tube

Last Answer : (C) Rotameter

Which of the following can be used for the direct measurement of volumetric flow rate of slurry? (A) Venturimeter (B) Orificemeter (C) Rotameter (D) Pitot tube

Description : Which of the following can be used for the direct measurement of volumetric flow rate of slurry? (A) Venturimeter (B) Orificemeter (C) Rotameter (D) Pitot tube

Last Answer : (C) Rotameter

Power loss in an orificemeter is __________ that in a Venturimeter. (A) Less than (B) Same as (C) More than (D) Data insufficient, cannot be predicted

Description : Power loss in an orificemeter is __________ that in a Venturimeter. (A) Less than (B) Same as (C) More than (D) Data insufficient, cannot be predicted

Last Answer : (C) More than

Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter(B) A Venturimeter with a given gage difference discharges at a greater rate,when the flow is vertically downward through it, than when the flow is verticallyupward(C) For a given pressure difference, the discharge of gas is greater through aVenturimeter, when compressibility is taken into account, than when it isneglected(D) The overall pressure loss is the same in a given pipe line, whether aVenturimeter or a nozzle with the same throat dia is used

Description : Sele(A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meterct the correct statement. (B) A Venturimeter with a given gage difference discharges at a ... a given pipe line, whether a Venturimeter or a nozzle with the same throat dia is used

Last Answer : (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meterct the correct statement

Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter(B) A Venturimeter with a given gage difference discharges at a greater rate,when the flow is vertically downward through it, than when the flow is verticallyupward(C) For a given pressure difference, the discharge of gas is greater through aVenturimeter, when compressibility is taken into account, than when it isneglected(D) The overall pressure loss is the same in a given pipe line, whether aVenturimeter or a nozzle with the same throat dia is used

Description : Select the correct statement. (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter (B) A Venturimeter with a given gage difference discharges at a ... a given pipe line, whether a Venturimeter or a nozzle with the same throat dia is used

Last Answer : (A) The discharge through a Venturimeter depends upon Δp only and isindependent of orientation of the meter

Out of the following flow measuring devices, which one incurs themaximum installation cost as well as pressure loss? (A) Flow nozzle (B) Venturimeter (C) Rotameter (D) Orificemeter

Description : Out of the following flow measuring devices, which one incurs themaximum installation cost as well as pressure loss? (A) Flow nozzle (B) Venturimeter (C) Rotameter (D) Orificemeter

Last Answer : (B) Venturimeter

For the same flow rate of a fluid, the pressure drop is the least for (A) Venturimeter (B) Orificemeter (C) Flow-nozzle (D) Δp is same for all

Description : For the same flow rate of a fluid, the pressure drop is the least for (A) Venturimeter (B) Orificemeter (C) Flow-nozzle (D) Δp is same for all

Last Answer : (A) Venturimeter

Which of the following flow measuring devices is an area meter? (A) Venturimeter (B) Orificemeter (C) Anemometer (D) Rotameter

Description : Which of the following flow measuring devices is an area meter? (A) Venturimeter (B) Orificemeter (C) Anemometer (D) Rotameter

Last Answer : (D) Rotameter

The energy loss in flow through Venturimeter is less than that through flow nozzle, because in case of a flow nozzle, the (A) Length is shorter (B) Throat diameter is more (C) Sudden expansion of flow in the downstream occurs (D) Distance between the throat and the inlet is more

Description : The energy loss in flow through Venturimeter is less than that through flow nozzle, because in case of a flow nozzle, the (A) Length is shorter (B) Throat diameter is more (C) Sudden expansion of flow in the downstream occurs (D) Distance between the throat and the inlet is more

Last Answer : (C) Sudden expansion of flow in the downstream occurs

A Venturimeter measures the (A) Velocity head (B) Pressure (C) Point velocity (D) None of these

Description : A Venturimeter measures the (A) Velocity head (B) Pressure (C) Point velocity (D) None of these

Last Answer : (D) None of these

Pick out the correct statement pertaining to Venturimeter. (A) A Venturimeter with a fixed pressure drop discharges more, when the flow is vertically downward, than when the flow is vertically upward (B) The co-efficient of contraction of a Venturimeter is always unity (C) For a fixed pressure drop, the discharge of a gas through a Venturimeter is greater, when compressibility is taken into account, than when it is neglected (D) None of these

Description : Pick out the correct statement pertaining to Venturimeter. (A) A Venturimeter with a fixed pressure drop discharges more, when the flow is vertically downward, than when the flow is vertically upward (B ... , when compressibility is taken into account, than when it is neglected (D) None of these

Last Answer : (D) None of these