Large tonnage of refractory bricks are dried in a (A) Shaft furnace (B) Rotary hearth furnace (C) Tunnel kiln (D) Muffle furnace

Large tonnage of refractory bricks are dried in a
(A) Shaft furnace
(B) Rotary hearth furnace
(C) Tunnel kiln
(D) Muffle furnace
by

1 Answer

Answer :

(C) Tunnel kiln
by

Related questions

Refractory bricks having high thermal conductivity is desirable, when it is to be used in the (A) L.D. converter (B) Blast furnace (C) Rotary kiln (D) Recuperator

Description : Refractory bricks having high thermal conductivity is desirable, when it is to be used in the (A) L.D. converter (B) Blast furnace (C) Rotary kiln (D) Recuperator

Last Answer : (D) Recuperator

An improved and fuel efficient version of the pusher type reheating furnace is the __________ furnace. (A) Walking beam (B) Shaft (C) Tunnel (D) Rotary hearth

Description : An improved and fuel efficient version of the pusher type reheating furnace is the __________ furnace. (A) Walking beam (B) Shaft (C) Tunnel (D) Rotary hearth

Last Answer : (A) Walking beam

A refractory wall separating the stock and the source of heat is provided in a (A) Updraft kiln (B) Muffle furnace (C) Continuous furnace (D) None of these

Description : A refractory wall separating the stock and the source of heat is provided in a (A) Updraft kiln (B) Muffle furnace (C) Continuous furnace (D) None of these

Last Answer : (B) Muffle furnace

Which of the following is a heat treatment furnace? (A) Muffle furnace (B) Annealing furnace (C) Reheating furnace (D) Rotary kiln

Description : Which of the following is a heat treatment furnace? (A) Muffle furnace (B) Annealing furnace (C) Reheating furnace (D) Rotary kiln

Last Answer : (B) Annealing furnace

Refractory bricks are usually dried in a __________ dryer. (A) Tray (B) Tunnel (C) Conveyor (D) Festoon

Description : Refractory bricks are usually dried in a __________ dryer. (A) Tray (B) Tunnel (C) Conveyor (D) Festoon

Last Answer : (B) Tunnel

Calcination of limestone to produce lime is done in a __________ kiln. (A) Tunnel (B) Rotary (C) Vertical shaft (D) Both (B) and (C)

Description : Calcination of limestone to produce lime is done in a __________ kiln. (A) Tunnel (B) Rotary (C) Vertical shaft (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Cement Kiln is a (A) Rotary Kiln (B) Tunnel Kiln (C) Natural draft furnace (D) Batch furnace

Description : Cement Kiln is a (A) Rotary Kiln (B) Tunnel Kiln (C) Natural draft furnace (D) Batch furnace

Last Answer : (A) Rotary Kiln

Which of the following is a periodic furnace? (A) Tunnel kiln (B) Rotary kiln (C) Soaking pit (D) Reheating furnace

Description : Which of the following is a periodic furnace? (A) Tunnel kiln (B) Rotary kiln (C) Soaking pit (D) Reheating furnace

Last Answer : (C) Soaking pit

__________ is an indirectly heated furnace. (A) Open hearth furnace (B) Muffle furnace (C) Soaking pit (D) Reheating furnace

Description : __________ is an indirectly heated furnace. (A) Open hearth furnace (B) Muffle furnace (C) Soaking pit (D) Reheating furnace

Last Answer : (B) Muffle furnace

Which of the following is not a directly fired furnace? (A) By-product coke oven (B) Calcination kiln (C) Sintering furnace (D) Open hearth furnace

Description : Which of the following is not a directly fired furnace? (A) By-product coke oven (B) Calcination kiln (C) Sintering furnace (D) Open hearth furnace

Last Answer : (A) By-product coke oven

Rotary driers are generally made of (A) Cast iron (B) Mild steel (C) High silicon iron (14% Si) (D) Tin lined with refractory bricks

Description : Rotary driers are generally made of (A) Cast iron (B) Mild steel (C) High silicon iron (14% Si) (D) Tin lined with refractory bricks

Last Answer : (B) Mild steel

Drying of refractory is normally carried out in a __________ dryer. (A) Open pan (B) Tray (C) Rotary vacuum (D) Truck/tunnel

Description : Drying of refractory is normally carried out in a __________ dryer. (A) Open pan (B) Tray (C) Rotary vacuum (D) Truck/tunnel

Last Answer : (D) Truck/tunnel

Calcination of limestone is not done in a __________ kiln for producing lime. (A) Vertical shaft (B) Rotary (C) Fluidised bed (D) Fixed bed

Description : Calcination of limestone is not done in a __________ kiln for producing lime. (A) Vertical shaft (B) Rotary (C) Fluidised bed (D) Fixed bed

Last Answer : (D) Fixed bed

Which of the following is a directly fired intermittent furnace? (A) Walking beam reheating furnace (B) Reverberatory furnace (C) Tower furnace (D) Tunnel kiln

Description : Which of the following is a directly fired intermittent furnace? (A) Walking beam reheating furnace (B) Reverberatory furnace (C) Tower furnace (D) Tunnel kiln

Last Answer : (B) Reverberatory furnace

Pot furnace which is either regenerative or recuperative, is used in the manufacture of (A) Glass (B) Stainless steel (C) Potteries (D) Refractory bricks

Description : Pot furnace which is either regenerative or recuperative, is used in the manufacture of (A) Glass (B) Stainless steel (C) Potteries (D) Refractory bricks

Last Answer : (A) Glass

Calcium ammonium nitrate (a fertiliser) is dried in a __________ dryer. (A) Rotary (B) Vacuum (C) Tunnel (D) Tray

Description : Calcium ammonium nitrate (a fertiliser) is dried in a __________ dryer. (A) Rotary (B) Vacuum (C) Tunnel (D) Tray

Last Answer : (A) Rotary

Advantage of a clamp compared to a kiln for burning bricks is that (A) It takes less time for burning (B) It gives more output of first class bricks (C) It has less initial cost (D) It is suitable when bricks are required in large numbers

Description : Advantage of a clamp compared to a kiln for burning bricks is that (A) It takes less time for burning (B) It gives more output of first class bricks (C) It has less initial cost (D) It is suitable when bricks are required in large numbers

Last Answer : Answer: Option C

An example of indirectly heated furnace is the (A) Soaking pit (B) Muffle furnace (C) Reheating furnace (D) None of these

Description : An example of indirectly heated furnace is the (A) Soaking pit (B) Muffle furnace (C) Reheating furnace (D) None of these

Last Answer : (B) Muffle furnace

In a muffle furnace, the muffle (A) Retards the heat transfer (B) Assists in temperature equalisation in the charge (C) Permits the use of controlled atmosphere for the protection of stock (D) All (A), (B) and (C)

Description : In a muffle furnace, the muffle (A) Retards the heat transfer (B) Assists in temperature equalisation in the charge (C) Permits the use of controlled atmosphere for the protection of stock (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The main function of a muffle in the muffle furnace is to (A) Protect the charge from the effects of the products of combustion (B) Smooth out temperature inequalities on the combustion side of the muffle wall (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The main function of a muffle in the muffle furnace is to (A) Protect the charge from the effects of the products of combustion (B) Smooth out temperature inequalities on the combustion side of the muffle wall (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The heating capacity of muffle furnace depends on the (A) Surface area & emissivity of the stock (B) Properties of the muffle wall (temperature, area, and emissivity) (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The heating capacity of muffle furnace depends on the (A) Surface area & emissivity of the stock (B) Properties of the muffle wall (temperature, area, and emissivity) (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Example of an indirectly heated furnace is (A) Hood annealing furnace (B) Muffle furnace (C) Both (A) and (B)(D) Neither (A) nor (B)

Description : Example of an indirectly heated furnace is (A) Hood annealing furnace (B) Muffle furnace (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Large quantity of silica gel is normally dried in a __________ dryer. (A) Freeze (B) Through circulation (C) Rotary vacuum (D) Tray

Description : Large quantity of silica gel is normally dried in a __________ dryer. (A) Freeze (B) Through circulation (C) Rotary vacuum (D) Tray

Last Answer : (B) Through circulation

Thermal efficiency of a limestone calcination rotary kiln may be around __________ percent. (A) 20 (B) 40 (C) 65 (D) 80

Description : Thermal efficiency of a limestone calcination rotary kiln may be around __________ percent. (A) 20 (B) 40 (C) 65 (D) 80

Last Answer : (B) 40

Calcination reaction of limestone (CaCO3 → CaO + CO2 ) goes to completion in the rotary kiln, because (A) CaO is not dissociated (B) CO2 escapes continuously (C) Of high calcination temperature (D) CaO is more stable than CaCO3

Description : Calcination reaction of limestone (CaCO3 → CaO + CO2 ) goes to completion in the rotary kiln, because (A) CaO is not dissociated (B) CO2 escapes continuously (C) Of high calcination temperature (D) CaO is more stable than CaCO3

Last Answer : (B) CO2 escapes continuously

Coal tar is used as a (A) Binding material for coal briquettes (B) Fuel in rotary kiln (C) Binder in making carbon electrodes (D) All (A), (B) and (C)

Description : Coal tar is used as a (A) Binding material for coal briquettes (B) Fuel in rotary kiln (C) Binder in making carbon electrodes (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Rotary kiln is not involved in the production of (A) Cement (B) Lime from limestone (C) Slaked lime from quick lime (D) None of these

Description : Rotary kiln is not involved in the production of (A) Cement (B) Lime from limestone (C) Slaked lime from quick lime (D) None of these

Last Answer : (C) Slaked lime from quick lime

Rotary lime kiln is an example of a/an __________ system. (A) Closed (B) Open (C) Isolated (D) Non-thermodynamic

Description : Rotary lime kiln is an example of a/an __________ system. (A) Closed (B) Open (C) Isolated (D) Non-thermodynamic

Last Answer : (B) Open

Sulphuric acid is mixed with ground phosphate rock (to produce phosphoric acid) in a steel digestor lined with(A) Acidic refractory(B) Rubber(C) Karbate(D) Lead or acid proof bricks

Description : Sulphuric acid is mixed with ground phosphate rock (to produce phosphoric acid) in a steel digestor lined with (A) Acidic refractory (B) Rubber (C) Karbate (D) Lead or acid proof bricks

Last Answer : (A) Acidic refractory

Sulphuric acid is mixed with ground phosphate rock (to produce phosphoric acid) in a steel digestor lined with (A) Acidic refractory (B) Rubber (C) Karbate (D) Lead or acid-proof bricks

Description : Sulphuric acid is mixed with ground phosphate rock (to produce phosphoric acid) in a steel digestor lined with (A) Acidic refractory (B) Rubber (C) Karbate (D) Lead or acid-proof bricks

Last Answer : (D) Lead or acid-proof bricks

Absorptivity of a perfect black body is unity. Which of the following has maximum absorptivity? (A) Aluminium foil (B) Refractory bricks (C) Iron plate (D) Coke breeze

Description : Absorptivity of a perfect black body is unity. Which of the following has maximum absorptivity? (A) Aluminium foil (B) Refractory bricks (C) Iron plate (D) Coke breeze

Last Answer : (D) Coke breeze

Which of the following has the minimum absorptivity? (A) Aluminium foil (B) Coal dust (C) Refractory bricks (D) Iron plates

Description : Which of the following has the minimum absorptivity? (A) Aluminium foil (B) Coal dust (C) Refractory bricks (D) Iron plates

Last Answer : (A) Aluminium foil

Which of the following is the most widely used heat insulating material for pipelines carrying steam? (A) Tar dolomite bricks followed by asbestos (B) Fireclay refractory followed by aluminium sheet (C) Cotton followed by aluminium foil (D) 85% magnesia cement and glass wool

Description : Which of the following is the most widely used heat insulating material for pipelines carrying steam? (A) Tar dolomite bricks followed by asbestos (B) Fireclay refractory followed by aluminium sheet (C) Cotton followed by aluminium foil (D) 85% magnesia cement and glass wool

Last Answer : (D) 85% magnesia cement and glass wool

Highly porous refractory bricks are (A) Less susceptible to chemical attack by molten fluxes and gases etc (B) Very strong (C) Having very high thermal conductivity (D) None of these

Description : Highly porous refractory bricks are (A) Less susceptible to chemical attack by molten fluxes and gases etc (B) Very strong (C) Having very high thermal conductivity (D) None of these

Last Answer : (D) None of these

Refractory bricks burnt at very high temperature have got (A) Greater resistance to corrosion by slags (B) Less resistance to corrosion by slags (C) High spalling tendency (D) None of these

Description : Refractory bricks burnt at very high temperature have got (A) Greater resistance to corrosion by slags (B) Less resistance to corrosion by slags (C) High spalling tendency (D) None of these

Last Answer : (A) Greater resistance to corrosion by slags

Pick up the correct statement from the following: (A) Bull's trench kiln a trench excavated in ground (B) Hoffman's kiln is constructed over ground (C) Tunnel Kiln is constructed as a tunnel (D) All the above

Description : Pick up the correct statement from the following: (A) Bull's trench kiln a trench excavated in ground (B) Hoffman's kiln is constructed over ground (C) Tunnel Kiln is constructed as a tunnel (D) All the above

Last Answer : Answer: Option D

To obtain cement dry powder, lime stones and shales or their slurry, is burnt in a rotary kiln at a temperature between (A) 1100° and 1200°C (B) 1200° and 1300°C (C) 1300° and 1400°C (D) 1400° and 1500°C

Description : To obtain cement dry powder, lime stones and shales or their slurry, is burnt in a rotary kiln at a temperature between (A) 1100° and 1200°C (B) 1200° and 1300°C (C) 1300° and 1400°C (D) 1400° and 1500°C

Last Answer : D

In the manufacture of cement, the dry of wet mixtue of calcareous and argillaceous materials is burnt in a (a) A Rotary kiln (b) A Grinder (c) Country kiln (d) All the above

Description : In the manufacture of cement, the dry of wet mixtue of calcareous and argillaceous materials is burnt in a (a) A Rotary kiln (b) A Grinder (c) Country kiln (d) All the above

Last Answer : (a) A Rotary kiln

Neutral atmosphere is maintained in a/an __________ furnace. (A) Cold rolled steel coil annealing (B) Open hearth (C) Soaking pit (D) Walking beam reheating

Description : Neutral atmosphere is maintained in a/an __________ furnace. (A) Cold rolled steel coil annealing (B) Open hearth (C) Soaking pit (D) Walking beam reheating

Last Answer : (A) Cold rolled steel coil annealing

Which furnace employs preheating, heating and soaking zones? (A) Soaking pit (B) Reheating furnace (C) Open hearth furnace (D) Cupola

Description : Which furnace employs preheating, heating and soaking zones? (A) Soaking pit (B) Reheating furnace (C) Open hearth furnace (D) Cupola

Last Answer : (B) Reheating furnace

Regenerators are normally provided in the (A) Glass melting furnace (B) Open hearth furnace (C) By product coke ovens (D) All (A), (B) and (C)

Description : Regenerators are normally provided in the (A) Glass melting furnace (B) Open hearth furnace (C) By product coke ovens (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Regenerators are normally provided in the (A) Glass melting furnace (B) Open hearth furnace (C) By product coke ovens (D) All (A), (B) and (C)

Description : Regenerators are normally provided in the (A) Glass melting furnace (B) Open hearth furnace (C) By product coke ovens (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Unit of furnace loading is (A) Ton stock/hr/m2 hearth area (B) Ton stock/hr (C) Ton stock/m2 hearth area (D) Both (B) and (C)

Description : Unit of furnace loading is (A) Ton stock/hr/m2 hearth area (B) Ton stock/hr (C) Ton stock/m2 hearth area (D) Both (B) and (C)

Last Answer : (A) Ton stock/hr/m2 hearth area

If the flame is produced under the hearth and then sweeps up into the heating chamber, this is called a/an __________ furnace. (A) Sidefired (B) Underfired (C) Covered (D) Recirculating

Description : If the flame is produced under the hearth and then sweeps up into the heating chamber, this is called a/an __________ furnace. (A) Sidefired (B) Underfired (C) Covered (D) Recirculating

Last Answer : (B) Underfired

Regenerators are installed in (A) Coke ovens (B) Open hearth furnace (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Regenerators are installed in (A) Coke ovens (B) Open hearth furnace (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Thermal efficiency of an open hearth furnace may be about __________ percent. (A) 5 (B) 20 (C) 50 (D) 80

Description : Thermal efficiency of an open hearth furnace may be about __________ percent. (A) 5 (B) 20 (C) 50 (D) 80

Last Answer : (B) 20

An example of recuperative furnace is the (A) Soaking pit (B) Open hearth furnace (C) Coke ovens (D) None of these

Description : An example of recuperative furnace is the (A) Soaking pit (B) Open hearth furnace (C) Coke ovens (D) None of these

Last Answer : (A) Soaking pit

Which is a regenerative furnace? (A) Coke oven heating chamber (B) Open hearth furnace (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Which is a regenerative furnace? (A) Coke oven heating chamber (B) Open hearth furnace (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Which is not a hearth furnace? (A) Glass tank furnace (B) Open hearth furnace (C) Cupola

Description : Which is not a hearth furnace? (A) Glass tank furnace (B) Open hearth furnace (C) Cupola

Last Answer : (C) Cupola

The heating capacity of continuous reheating furnace depends upon the (A) Hearth area and furnace temperature (B) Emissivity of the stock (C) Ratio of wall surface to stock surface (D) All (A), (B) and (C)

Description : The heating capacity of continuous reheating furnace depends upon the (A) Hearth area and furnace temperature (B) Emissivity of the stock (C) Ratio of wall surface to stock surface (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)