The metals occuring at the lower most position in the electromotive series (A) Do not resist corrosion (B) Resist corrosion very strongly (C) Are very brittle (D) Are heat insulators

The metals occuring at the lower most position in the electromotive
series
(A) Do not resist corrosion
(B) Resist corrosion very strongly
(C) Are very brittle
(D) Are heat insulators
by

1 Answer

Answer :

(B) Resist corrosion very strongly
by

Related questions

Which one occupies the lowermost position in the electromotive series of metals? (A) Aluminium (B) Noble metals (Ag, Pt, Au) (C) Zinc (D) Alkali metals (K, Na, Li)

Description : Which one occupies the lowermost position in the electromotive series of metals? (A) Aluminium (B) Noble metals (Ag, Pt, Au) (C) Zinc (D) Alkali metals (K, Na, Li)

Last Answer : (B) Noble metals (Ag, Pt, Au)

Figure out the odd statement about ceramics in the following (a) Good insulators of heat and electricity (b) Usually less desire than metals (c) Ductile in nature (d) Contains both metallic and nonmetallic elements

Description : Figure out the odd statement about ceramics in the following (a) Good insulators of heat and electricity (b) Usually less desire than metals (c) Ductile in nature (d) Contains both metallic and nonmetallic elements  

Last Answer : (c) Ductile in nature

Superconductors are those elements – (1) Whose conductivity is intermediate between metals and insulators (2) Whose resistance falls almost to zero at very low temperature (3) Which conduct electricity only at super-high temperature (4) Which conduct electricity only, at super-high temperatures

Description : Superconductors are those elements – (1) Whose conductivity is intermediate between metals and insulators (2) Whose resistance falls almost to zero at very low temperature (3) Which conduct electricity only at super-high temperature (4) Which conduct electricity only, at super-high temperatures

Last Answer : (2) Whose resistance falls almost to zero at very low temperature Explanation: Superconductivity is a phenomenon of exactly zero electrical resistance and expulsion of magnetic fields occurring in ... lines from the interior of the superconductor as it transitions into the superconducting state.

Superconductors are those elements (1) Whose conductivity is intermediate between metals and insulators (2) Whose resistance falls almost to zero at very low temperatures (3) which turn into insulators at very low temperatures (4) which conduct electricity only at super-high temperatures

Description : Superconductors are those elements (1) Whose conductivity is intermediate between metals and insulators (2) Whose resistance falls almost to zero at very low temperatures (3) which turn into insulators at very low temperatures (4) which conduct electricity only at super-high temperatures

Last Answer : Whose resistance falls almost to zero at very low temperatures

Sacrificial anode method is used in the protection of pipelines which are buried underground. Sacrificial anode (A) Occurs higher in the electro-chemical series of metals (B) Is exemplified by magnesium plate (C) Is much cheaper than the cathodic base material to be guarded against corrosion (D) All (A), (B) & (C)

Description : Sacrificial anode method is used in the protection of pipelines which are buried underground. Sacrificial anode (A) Occurs higher in the electro-chemical series of metals (B) Is exemplified by magnesium plate (C) ... cathodic base material to be guarded against corrosion (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Metal at the top of the electromotive series is (A) Least active (B) Most stable (C) Most active (D) Most noble

Description : Metal at the top of the electromotive series is (A) Least active (B) Most stable (C) Most active (D) Most noble

Last Answer : (C) Most active

Zinc is highly __________ at room temperature. (A) Ductile (B) Resistant to atmospheric corrosion (C) Malleable (D) Brittle

Description : Zinc is highly __________ at room temperature. (A) Ductile (B) Resistant to atmospheric corrosion (C) Malleable (D) Brittle

Last Answer : (B) Resistant to atmospheric corrosion

Two cells connected in series have electromotive force of 1.5 V each. Their internal resistances are `0.5 Omega` and `0.25 Omega` respectively. This c

Description : Two cells connected in series have electromotive force of 1.5 V each. Their internal resistances are `0.5 Omega` and `0.25 Omega` respectively. This c

Last Answer : Two cells connected in series have electromotive force of 1.5 V each. Their internal ... potential differnce across the terminals of each cell.

The phenomenon during which the boiler material becomes brittle due to accumulation of caustic substances is known as ___________ a) Foaming b) Priming c) Corrosion d) Caustic embrittlement

Description : The phenomenon during which the boiler material becomes brittle due to accumulation of caustic substances is known as ___________ a) Foaming b) Priming c) Corrosion d) Caustic embrittlement

Last Answer : d) Caustic embrittlement

An annuity is a series of equal payments occuring at equal time intervals, and this amount includes the sum of all payments plus interest, if allowed to accumulate at a definite rate of interest from the time of initial payment to the end of annuity term. Ordinary annuity is used in the calculation of the (A) Manufacturing cost (B) Depreciation by sinking fund method (C) Discrete compound interest (D) Cash ratio

Description : An annuity is a series of equal payments occuring at equal time intervals, and this amount includes the sum of all payments plus interest, if allowed to accumulate at a definite rate of interest from ... cost (B) Depreciation by sinking fund method (C) Discrete compound interest (D) Cash ratio

Last Answer : (B) Depreciation by sinking fund method

Though tin occurs lower than iron in the electrochemical series, yet it is coated on steel for corrosion protection, because of its (A) Lower cost (B) Abundant availability (C) Resistance to vegetable acids as the tin plate are commercially used in 'canning' industry (D) None of these

Description : Though tin occurs lower than iron in the electrochemical series, yet it is coated on steel for corrosion protection, because of its (A) Lower cost (B) Abundant availability (C) Resistance to vegetable acids as the tin plate are commercially used in 'canning' industry (D) None of these

Last Answer : (C) Resistance to vegetable acids as the tin plate are commercially used in 'canning' industry

Cast iron pipes (A) Are widely used in city water supplies (B) Resist corrosion satisfactorily (C) May last for 100 years (D) All the above

Description : Cast iron pipes (A) Are widely used in city water supplies (B) Resist corrosion satisfactorily (C) May last for 100 years (D) All the above

Last Answer : (D) All the above

The Modulus of Elasticity for a material refers to: w) the ability of a material to resist corrosion x) the ratio of stress over strain y) the maximum load over the cross sectional area z) none of the above

Description : The Modulus of Elasticity for a material refers to: w) the ability of a material to resist corrosion x) the ratio of stress over strain y) the maximum load over the cross sectional area z) none of the above

Last Answer : ANSWER: X -- THE RATIO OF STRESS OVER STRAIN

Which metals are very corrosion resistant?

Description : Which metals are very corrosion resistant?

Last Answer : Bronze.

Probability of cavitation occuring becomes very high, when the local __________ resulting in water bubbles formation, which on rupture cause cavitation (A) Pressure falls below the vapour pressure (B) Pressure becomes very high (C) Temperature becomes low (D) All 'a', 'b' & 'c'

Description : Probability of cavitation occuring becomes very high, when the local __________ resulting in water bubbles formation, which on rupture cause cavitation (A) Pressure falls below the vapour pressure (B) Pressure becomes very high (C) Temperature becomes low (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Light waves can cause photoelectric emission in a) Metals b) Alkali metals c) Insulators d) None of the above

Description : Light waves can cause photoelectric emission in a) Metals b) Alkali metals c) Insulators d) None of the above

Last Answer : c) Insulators

Transistors are made from (a) Plastic (b) metals (c)insulators (d) doped semiconductors

Description : Transistors are made from (a) Plastic (b) metals (c)insulators (d) doped semiconductors

Last Answer : d) doped semiconductors

The property of metals being beaten into thin sheets is called A) Ductility B) Malleability C)Brittle D)None of these

Description : The property of metals being beaten into thin sheets is called A) Ductility B) Malleability C)Brittle D)None of these

Last Answer : B) Malleability

Wrought iron is having very high (A) Hardness (B) Strength (C) Corrosion resistance (D) Susceptibility to changes in its properties by heat treatment

Description : Wrought iron is having very high (A) Hardness (B) Strength (C) Corrosion resistance (D) Susceptibility to changes in its properties by heat treatment

Last Answer : (C) Corrosion resistance

Ceramic nuclear metals compared to solid nuclear metals have (A) Higher melting points (B) Low strength at high temperature (C) More chances of radiation damage (D) Poorer corrosion resistance

Description : Ceramic nuclear metals compared to solid nuclear metals have (A) Higher melting points (B) Low strength at high temperature (C) More chances of radiation damage (D) Poorer corrosion resistance

Last Answer : (A) Higher melting points

Atmospheric corrosion of metals result from their (A) Slow oxidation (B) Fast oxidation (C) Fast hydration (D) Slow dehydration

Description : Atmospheric corrosion of metals result from their (A) Slow oxidation (B) Fast oxidation (C) Fast hydration (D) Slow dehydration

Last Answer : (A) Slow oxidation

Which of the following metals in not used for coating of the base metal to guard it against corrosion? (A) Lead (B) Cadmium (C) Magnesium (D) Aluminium

Description : Which of the following metals in not used for coating of the base metal to guard it against corrosion? (A) Lead (B) Cadmium (C) Magnesium (D) Aluminium

Last Answer : (C) Magnesium

Moist atmospheric air at high temperature (e.g., in summer) having high concentration of sulphur dioxide causes(A) Fading of dyes on textiles(B) Corrosion, tarnishing & soiling of metals(C) Reduced strength of textiles(D) All (A), (B) and (C)

Description : Moist atmospheric air at high temperature (e.g., in summer) having high concentration of sulphur dioxide causes (A) Fading of dyes on textiles (B) Corrosion, tarnishing & soiling of metals (C) Reduced strength of textiles (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Exposure to SO2 containing chimney gases results in the (A) Reduction in strength of leather & cloth (B) Acceleration of corrosion rates of metals (C) Increased drying & hardening time of paints (D) All (A), (B) and (C)

Description : Exposure to SO2 containing chimney gases results in the (A) Reduction in strength of leather & cloth (B) Acceleration of corrosion rates of metals (C) Increased drying & hardening time of paints (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than chromate coating (C) The base metal to be electroplated is normally made the cathode of the electrolytic cell and coating metal is made the anode (D) Calorising is the process of coating steel with chromium

Description : Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than ... coating metal is made the anode (D) Calorising is the process of coating steel with chromium

Last Answer : (D) Calorising is the process of coating steel with chromium

With increase in impurities in metals, their corrosion resistances (A) Increase (B) Decrease (C) Remain same (D) May increase or decrease; depending on the type of metal

Description : With increase in impurities in metals, their corrosion resistances (A) Increase (B) Decrease (C) Remain same (D) May increase or decrease; depending on the type of metal

Last Answer : (B) Decrease

In connection with corrosion of metals, passivation is the process that (A) Intensifies deterioration (B) Changes the composition of the metal (C) Inhibits further deterioration (D) None of these

Description : In connection with corrosion of metals, passivation is the process that (A) Intensifies deterioration (B) Changes the composition of the metal (C) Inhibits further deterioration (D) None of these

Last Answer : (C) Inhibits further deterioration

Corrosion of metals cannot be prevented by its (A) Tempering (B) Chromising (C) Aluminising (D) Alloying

Description : Corrosion of metals cannot be prevented by its (A) Tempering (B) Chromising (C) Aluminising (D) Alloying

Last Answer : (A) Tempering

How can wet carbon dioxide be responsible for a corrosion problem in iron-containing metals? How can wet carbon dioxide be responsible for a corrosion problem in iron-containing metals?

Description : How can wet carbon dioxide be responsible for a corrosion problem in iron-containing metals?

Last Answer : Carbon dioxide reacts with water according to the following equation: CO2 + H2O -> HCO3- + H+ As the concentration of CO2 increases, so does the concentration of the H+ ion. This ion ... ions produced can react with the bicarbonate ions to form ferrous carbonate, which precipitates as a scale.

Compare pin type and suspension insulators on given points: (i) Position of insulator on cross arm. (ii) Position of conductor on insulator. (iii) Reaction on cross arm. (iv) Possibility of flash over due to large birds (v) Maintenance/Replacement cost (vi) Maximum voltage level (vii) Effect on height of supporting structure. (viii) Life

Description : Compare pin type and suspension insulators on given points: (i) Position of insulator on cross arm. (ii) Position of conductor on insulator. (iii) Reaction on cross arm. (iv) Possibility of ... Replacement cost (vi) Maximum voltage level (vii) Effect on height of supporting structure. (viii) Life 

Last Answer : S.No  Points Pin Type insulator Suspension or Disc Type insulator 1 Position of insulator on cross arm It is fixed on top of cross arm by using galvanized steel pin. So it is ... so to maintain minimum ground clearance height of pole increase.  8 Life Less More

Write about the corrosion of metals by water, steam and soil in detail.

Description : Write about the corrosion of metals by water, steam and soil in detail. 

Last Answer : Corrosion (i)by water: physical configuration of the system hardness of water, salts, chlorides, and dissolved gases such as oxygen, carbon dioxide, and sulphur dioxide. Presence of suspended ... is more corrosion is less. If dissolved salts more, conductivity is more and corrosion is more.

Which one of the following metals is immune to corrosion by air, water, hydrochloric acid and nitric acid; but is soluble in aqua regia? w) gold x) silver y) magnesium z) nickel

Description : Which one of the following metals is immune to corrosion by air, water, hydrochloric acid and nitric acid; but is soluble in aqua regia? w) gold x) silver y) magnesium z) nickel

Last Answer : ANSWER: W -- GOLD

Duriron is (A) Acid resistant, brittle and very hard (B) High silicon iron (C) Prone to breakage due to thermal expansion because of its very high co￾efficient of thermal expansion (D) All (A), (B) and (C)

Description : Duriron is (A) Acid resistant, brittle and very hard (B) High silicon iron (C) Prone to breakage due to thermal expansion because of its very high co￾efficient of thermal expansion (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Very high sulphur in pig iron makes (A) Its casting unsound (B) Its hard and machinable (C) Its brittle and malleable (D) All (A), (B) & (C)

Description : Very high sulphur in pig iron makes (A) Its casting unsound (B) Its hard and machinable (C) Its brittle and malleable (D) All (A), (B) & (C)

Last Answer : (A) Its casting unsound

White cast iron as compared to grey cast iron is (A) More durable (B) Very brittle (C) Very hard (D) All (A), (B) & (C)

Description : White cast iron as compared to grey cast iron is (A) More durable (B) Very brittle (C) Very hard (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

What is the meaning of ' electromotive force 1.5 volts' of a dehydrated cell ?

Description : What is the meaning of ' electromotive force 1.5 volts' of a dehydrated cell ?

Last Answer : The electromotive force of a dehydrated cell is 1.5 volts' , which means 1.5 joules of electricity to conduct 1 coulomb of electricity from the positive pole of the cell to the negative pole .

What is the difference between voltage and electromotive force?

Description : What is the difference between voltage and electromotive force?

Last Answer : Need answer

The twisting force developed by a motor and applied to a shaft is called _____________. A. magnetism B. electromotive force C. torque D. voltage

Description : The twisting force developed by a motor and applied to a shaft is called _____________. A. magnetism B. electromotive force C. torque D. voltage

Last Answer : Answer: C

The force that causes free electrons to move in a conductor as electric current flow is called a/an _____________. A. resistant force B. electromotive force C. inductive force D. dielectric force

Description : The force that causes free electrons to move in a conductor as electric current flow is called a/an _____________. A. resistant force B. electromotive force C. inductive force D. dielectric force

Last Answer : Answer: B

What is the function of the interpoles installed in DC motors? A. To provide greater torque by strengthening the main field. B. To provide sparkless commutation without having to shift the brushes. C. To limit the production of counter-electromotive force. D. To limit the starting surge current.

Description : What is the function of the interpoles installed in DC motors? A. To provide greater torque by strengthening the main field. B. To provide sparkless commutation without having to shift the brushes. C. To limit the production of counter-electromotive force. D. To limit the starting surge current.

Last Answer : Answer: B

How electromotive force is created in a generator?

Description : How electromotive force is created in a generator? 

Last Answer : When a conductor cuts the magnetic lines of forces, an Electro motive force (emf) is generated. The magnitude of the generated voltage is directly proportional to the rate of change at which a conductor cuts the magnetic lines of force. 

Find the force that exists in an electromagnetic wave. a) Electrostatic force b) Magnetostatic force c) Lorentz force d) Electromotive force

Description : Find the force that exists in an electromagnetic wave. a) Electrostatic force b) Magnetostatic force c) Lorentz force d) Electromotive force

Last Answer : c) Lorentz force

According to Faraday’s law, EMF stands for a) Electromagnetic field b) Electromagnetic force c) Electromagnetic friction d) Electromotive force

Description : According to Faraday’s law, EMF stands for a) Electromagnetic field b) Electromagnetic force c) Electromagnetic friction d) Electromotive force

Last Answer : d) Electromotive force

Gilbert is a unit of (a) electromotive force (6) magnetomotive force (c) conductance (d) permittivity

Description : Gilbert is a unit of (a) electromotive force (6) magnetomotive force (c) conductance (d) permittivity

Last Answer : (6) magnetomotive force

'Shock-absorbers are usually made of steel as it – (1) is not brittle (2) has lower elasticity (3) has higher elasticity (4) has no ductile property

Description : 'Shock-absorbers are usually made of steel as it – (1) is not brittle (2) has lower elasticity (3) has higher elasticity (4) has no ductile property

Last Answer : (3) has higher elasticity Explanation: A shock absorber is a mechanical device designed to smooth out or damp shock impulse, and dissipate kinetic energy. Steel is an alloy made by combining iron and other elements, the most common of these being carbon.

The disadvantage of heating the impression compound in a water bath is: A. It may become brittle B. It may become grainy C. Lower moles with constituents are leached out D. The plasticity of the compound may be altered E. All of the above

Description : The disadvantage of heating the impression compound in a water bath is: A. It may become brittle B. It may become grainy C. Lower moles with constituents are leached out D. The plasticity of the compound may be altered E. All of the above

Last Answer : D. The plasticity of the compound may be altered

'Shock-absorbers' are usually made of steel as it : (1) is not brittle (2) has lower elasticity (3) has higher elasticity (4) has no ductile property

Description : 'Shock-absorbers' are usually made of steel as it : (1) is not brittle (2) has lower elasticity (3) has higher elasticity (4) has no ductile property

Last Answer : has higher elasticity

At very high frequencies, what characteristics are displayed by ordinary insulators?

Description : At very high frequencies, what characteristics are displayed by ordinary insulators?

Last Answer : The characteristics of the dielectric of a capacitor.

Which of the following reactions occuring during coal gasification is called the Neumann reversal reaction? (A) 2CO ↔ C + CO2 (B) CO + H2O ↔ CO2 + H2 (C) C + H2O ↔ CO + H2 (D) C + 2H2O ↔ CO2 + 2H2

Description : Which of the following reactions occuring during coal gasification is called the Neumann reversal reaction? (A) 2CO ↔ C + CO2 (B) CO + H2O ↔ CO2 + H2 (C) C + H2O ↔ CO + H2 (D) C + 2H2O ↔ CO2 + 2H2

Last Answer : (A) 2CO ↔ C + CO2

The phenomenon occuring during pumping of a liquid solution containing dissolved gases, which may come out of the solution giving rise to gas pockets, is termed as (A) Evaporation (B) Cavitation (C) Sublimation (D) Stripping

Description : The phenomenon occuring during pumping of a liquid solution containing dissolved gases, which may come out of the solution giving rise to gas pockets, is termed as (A) Evaporation (B) Cavitation (C) Sublimation (D) Stripping

Last Answer : (B) Cavitation