Though tin occurs lower than iron in the electrochemical series, yet it is coated on steel for corrosion protection, because of its (A) Lower cost (B) Abundant availability (C) Resistance to vegetable acids as the tin plate are commercially used in 'canning' industry (D) None of these

Though tin occurs lower than iron in the electrochemical series, yet it is coated on steel for corrosion protection, because of its
(A) Lower cost
(B) Abundant availability
(C) Resistance to vegetable acids as the tin plate are commercially used in 'canning' industry
(D) None of these
by

1 Answer

Answer :

(C) Resistance to vegetable acids as the tin plate are commercially used in 'canning' industry
by

Related questions

Tin base and lead base alloys are used for bearing materials. Tin compared to lead has lower (A) Price (B) Corrosion resistance (C) Thermal conductivity (D) Abundant availability

Description : Tin base and lead base alloys are used for bearing materials. Tin compared to lead has lower (A) Price (B) Corrosion resistance (C) Thermal conductivity (D) Abundant availability

Last Answer : (D) Abundant availability

Pick out the correct statement. (A) Stainless steel is nothing but chromium coated steel (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal (C) Plastic deformation of a material is its temporary distortion under the action of applied stress (D) Rusting of iron is not electrochemical in nature

Description : Pick out the correct statement. (A) Stainless steel is nothing but chromium coated steel (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal (C) ... its temporary distortion under the action of applied stress (D) Rusting of iron is not electrochemical in nature

Last Answer : (B) Hardening of a soft metal can be done by alloying it with another metal or non-metal

Sacrificial anode method is used in the protection of pipelines which are buried underground. Sacrificial anode (A) Occurs higher in the electro-chemical series of metals (B) Is exemplified by magnesium plate (C) Is much cheaper than the cathodic base material to be guarded against corrosion (D) All (A), (B) & (C)

Description : Sacrificial anode method is used in the protection of pipelines which are buried underground. Sacrificial anode (A) Occurs higher in the electro-chemical series of metals (B) Is exemplified by magnesium plate (C) ... cathodic base material to be guarded against corrosion (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

The chemistry of corrosion of iron is essentially an electrochemical phenomenon. Explain the reactions occurring during the corrosion of iron in the atmosphere. -Chemistry

Description : The chemistry of corrosion of iron is essentially an electrochemical phenomenon. Explain the reactions occurring during the corrosion of iron in the atmosphere. -Chemistry

Last Answer : The mechanism of corrosion is explained on the basis of electrochemical theory. By taking example of rusting of iron, we Refer tothe formation of small electrochemical cells on the surface of iron. The redox reaction involves ... net resultant Redox reaction is 2Fe(s) + O2 (g) + 4H+ → 2Fe2+ + 2H2O

The most important requirement for aluminium industry is the availability of cheap (A) Ore (B) Electrical power (C) Labour (D) Abundant water

Description : The most important requirement for aluminium industry is the availability of cheap (A) Ore (B) Electrical power (C) Labour (D) Abundant water

Last Answer : (B) Electrical power

Hastelloy C is a good material of construction in chemical process industry, since it is (A) Highly corrosion resistant and is readily fabricated (B) Relatively inexpensive although it can be fabricated with some difficulty (C) Corrosion resistant to most alkalis, particularly because of its copper content (D) Light and resists attack by acids

Description : Hastelloy C is a good material of construction in chemical process industry, since it is (A) Highly corrosion resistant and is readily fabricated (B) Relatively inexpensive although it can be ... most alkalis, particularly because of its copper content (D) Light and resists attack by acids

Last Answer : (D) Light and resists attack by acids

In order to prevent the corrosion of iron pipes they are often coated with a layer of zinc. This process is termed as: A. Electroplating B. Annealing C. Galvanization D. Vulcanization

Description : In order to prevent the corrosion of iron pipes they are often coated with a layer of zinc. This process is termed as: A. Electroplating B. Annealing C. Galvanization D. Vulcanization

Last Answer : ANSWER: C

In order to prevent the corrosion of iron pipes, they are often coated with a layer of zinc. This process is termed as (a) electroplating (b) annealing (c) galvanization (d) vulcanization

Description : In order to prevent the corrosion of iron pipes, they are often coated with a layer of zinc. This process is termed as (a) electroplating (b) annealing (c) galvanization (d) vulcanization

Last Answer : Ans:(c)

In order to prevent the corrosion of iron pipes they are often coated with a layer of zinc. This process is termed as------? A. Electroplating B. Annealing C. Galvanization (Answer) D. Vulcanization

Description : In order to prevent the corrosion of iron pipes they are often coated with a layer of zinc. This process is termed as------? A. Electroplating B. Annealing C. Galvanization (Answer) D. Vulcanization

Last Answer : C. Galvanization (Answer)

In galvanization, iron is coated with – (1) Copper (2) Zinc (3) Tin (4) Nickel

Description : In galvanization, iron is coated with – (1) Copper (2) Zinc (3) Tin (4) Nickel

Last Answer : (2) Zinc Explanation: Galvanization is the process of applying a protective zinc coating to steel or iron, to prevent rusting. The most common method is hot-dip galvanization, in which parts are submerged in a bath of molten zinc.

Iron coated with Tin is called?

Description : Iron coated with Tin is called?

Last Answer : Tin Plating

In galvanization, iron is coated with (1) Copper (2) Zinc (3) Tin (4) Nickel

Description : In galvanization, iron is coated with (1) Copper (2) Zinc (3) Tin (4) Nickel 

Last Answer : Zinc

Which of the following is not one of the reasons for concentration of jute mills in Kolkata? (a) Cheap and abundant power supply (b) Availability of coal (c) A large supply of cheap labour and water required for industry (d) The port of Kolkata can easily export all the jute goods

Description : Which of the following is not one of the reasons for concentration of jute mills in Kolkata? (a) Cheap and abundant power supply (b) Availability of coal (c) A large supply of cheap labour and water required for industry (d) The port of Kolkata can easily export all the jute goods

Last Answer : Ans: (a)

Copper and Silver lie below in the electrochemical series and yet they are found in the combined state as sulphide in nature.Comment.

Description : Copper and Silver lie below in the electrochemical series and yet they are found in the combined state as sulphide in nature.Comment.

Last Answer : Ans. : Due to high polarizing power of Cu and Ag ions, their sulphides are even more stable than the metals. 

Corrosion involves exchange of electrons in __________ corrosion. (A) Chemical (B) Electrochemical (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Corrosion involves exchange of electrons in __________ corrosion. (A) Chemical (B) Electrochemical (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Electrochemical corrosion can occur, only if __________ is present in contact with metal. (A) Air (B) Oxygen (C) Liquid medium (D) Gaseous medium

Description : Electrochemical corrosion can occur, only if __________ is present in contact with metal. (A) Air (B) Oxygen (C) Liquid medium (D) Gaseous medium

Last Answer : (C) Liquid medium

Out of the following, the __________ pipe has the least corrosion resistance. (A) Mild steel (B) Copper (C) Cast iron (D) Wrought iron

Description : Out of the following, the __________ pipe has the least corrosion resistance. (A) Mild steel (B) Copper (C) Cast iron (D) Wrought iron

Last Answer : D) Wrought iron

Which of the following is the most prone to atmospheric corrosion? (A) Silver (B) Iron (C) Tin (D) Copper

Description : Which of the following is the most prone to atmospheric corrosion? (A) Silver (B) Iron (C) Tin (D) Copper

Last Answer : (B) Iron

Food cans are coated with Tin and not Zinc because?

Description : Food cans are coated with Tin and not Zinc because?

Last Answer : Zinc is more reactive than Tin

Using the electrochemical series, how can I explain why manufacturers coat steel nails with zinc rather than copper?

Description : Using the electrochemical series, how can I explain why manufacturers coat steel nails with zinc rather than copper?

Last Answer : Because the use of zinc is…......... Nah you do the work , or its called cheating :P

“Though India is an important iron and steel producing country in the world, yet we are not able to perform to our full potential.” -SST 10th

Description : “Though India is an important iron and steel producing country in the world, yet we are not able to perform to our full potential.” -SST 10th

Last Answer : It is largely due to high costs and limited availability of coking coal. There is low productivity of labour. Moreover, there is irregularity of supply of energy and of course, the poor infrastructure.

The deterioration of a metal by an electrochemical process is commonly termed as – (1) Erosion (2) Corrosion (3) Passivation (4) Abrasion

Description : The deterioration of a metal by an electrochemical process is commonly termed as – (1) Erosion (2) Corrosion (3) Passivation (4) Abrasion

Last Answer : (2) Corrosion Explanation: Corrosion can be defined as the deterioration of materials by chemical processes.

Define electrochemical corrosion.

Description : Define electrochemical corrosion.

Last Answer : Electrochemical corrosion:- The corrosion which is brought about through ionic reactions in the presence of moisture or solution as a conducting medium when two dissimilar metals are in contact with each other is called electro chemical corrosion. 

The deterioration of a metal by an electrochemical process is commonly termed as (1) Erosion (2) Corrosion (3) Passivation (4) Abrasion

Description : The deterioration of a metal by an electrochemical process is commonly termed as (1) Erosion (2) Corrosion (3) Passivation (4) Abrasion

Last Answer : Corrosion

Name any four factors affecting electrochemical corrosion.

Description : Name any four factors affecting electrochemical corrosion.

Last Answer : A) Nature of metal:  1) Position of metal in a galvanic series: A metal having higher position in a galvanic series has more chemical reactivity and therefore, it gets attacked by gaseous and ... as a conducting medium and promotes corrosion. e.g:- Rusting of Fe is promoted in humid atmosphere.

Apart from the availability of raw material location of an industry is also dependent on the availability of: (1) enviornmental protection and vegetation (2) man power and energy source (3) transport and bio energy (4) water and inputs

Description : Apart from the availability of raw material location of an industry is also dependent on the availability of: (1) enviornmental protection and vegetation (2) man power and energy source (3) transport and bio energy (4) water and inputs

Last Answer : (2) man power and energy source Explanation: Some of the factors which affect the industrial location are as follows: availability of raw materials, avail-ability of labour, availability of ... that is indispensable for industry. Besides, availability of power/electricity is also a deciding factor.

Apart from the availability of raw material location of an industry is also dependent on the availability of: (1) enviornmental protection and vegetation (2) man power and energy source (3) transport and bio energy (4) water and inputs

Description : Apart from the availability of raw material location of an industry is also dependent on the availability of: (1) enviornmental protection and vegetation (2) man power and energy source (3) transport and bio energy (4) water and inputs

Last Answer :  man power and energy source

Renewal of slack rivets should be taken up in steel girder bridges: a) All rivets which are hand loose or which have lost 50% of their head by corrosion. b) All hammer loose rivets where corrosion has set in between the head and the plate. c) In end stiffeners when the percentage of hammer loose rivets is >30% d) All the above*

Description : Renewal of slack rivets should be taken up in steel girder bridges: a) All rivets which are hand loose or which have lost 50% of their head by corrosion. b) All hammer loose rivets where corrosion has set ... . c) In end stiffeners when the percentage of hammer loose rivets is >30% d) All the above*

Last Answer : d) All the above*

Which of the following statements best describes the material known as varnished cambric? A. Felted asbestos sealed with varnish. B. Cotton cloth coated with insulating varnish. C. Rubber insulation coated with a layer of tin. D. Paper impregnated with mineral oil, specially wrapped with nonmetallic tape, and coated with varnish.

Description : Which of the following statements best describes the material known as varnished cambric? A. Felted asbestos sealed with varnish. B. Cotton cloth coated with insulating varnish. C. Rubber ... Paper impregnated with mineral oil, specially wrapped with nonmetallic tape, and coated with varnish.

Last Answer : Answer: B

The metals occuring at the lower most position in the electromotive series (A) Do not resist corrosion (B) Resist corrosion very strongly (C) Are very brittle (D) Are heat insulators

Description : The metals occuring at the lower most position in the electromotive series (A) Do not resist corrosion (B) Resist corrosion very strongly (C) Are very brittle (D) Are heat insulators

Last Answer : (B) Resist corrosion very strongly

Which of the following factors is the most important in the site selection for a nuclear power plant? (A) Absence of earthquake prone zone in nearby areas (B) Abundant availability of water (C) Remotely located from residential areas (D) Proximity to fuel source

Description : Which of the following factors is the most important in the site selection for a nuclear power plant? (A) Absence of earthquake prone zone in nearby areas (B) Abundant availability of water (C) Remotely located from residential areas (D) Proximity to fuel source

Last Answer : (A) Absence of earthquake prone zone in nearby areas

Presence of nickel in steel improves its (A) Corrosion resistance (B) Cutting ability (C) Wear resistance (D) All (A), (B) and (C

Description : Presence of nickel in steel improves its (A) Corrosion resistance (B) Cutting ability (C) Wear resistance (D) All (A), (B) and (C

Last Answer : (A) Corrosion resistance

The process of coating steel sheets by zinc to improve its corrosion resistance is called (A) Calorising (B) Galvanising (C) Zincification (D) Tempering

Description : The process of coating steel sheets by zinc to improve its corrosion resistance is called (A) Calorising (B) Galvanising (C) Zincification (D) Tempering

Last Answer : (B) Galvanising

Presence of manganese in alloy steel improves its (A) Corrosion resistance (B) Cutting ability (C) Abrasion resistance & toughness (D) Elasticity & creep resistance

Description : Presence of manganese in alloy steel improves its (A) Corrosion resistance (B) Cutting ability (C) Abrasion resistance & toughness (D) Elasticity & creep resistance

Last Answer : (C) Abrasion resistance & toughness

Addition of lead, sulphur and phosphorus to low carbon steel helps in improving its (A) Corrosion resistance (B) Tensile strength (C) Machinability (D) Compressive strength

Description : Addition of lead, sulphur and phosphorus to low carbon steel helps in improving its (A) Corrosion resistance (B) Tensile strength (C) Machinability (D) Compressive strength

Last Answer : (C) Machinability

Presence of cobalt in steel improves its (A) Cutting ability (B) Corrosion resistance (C) Tensile strength

Description : Presence of cobalt in steel improves its (A) Cutting ability (B) Corrosion resistance (C) Tensile strength

Last Answer : (A) Cutting ability

Addition of tungsten to steel imparts (A) Magnetic properties (B) Cutting hardness (C) Corrosion resistance (D) Ductility

Description : Addition of tungsten to steel imparts (A) Magnetic properties (B) Cutting hardness (C) Corrosion resistance (D) Ductility

Last Answer : (B) Cutting hardness

Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten

Description : Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten

Last Answer : (B) Nickel and chromium

__________ is the process of coating the surface of steel with aluminium oxide, thereby imparting it increased resistance to corrosion & oxidation upto a temperature of 700°C. (A) Veneering (B) Galvanising (C) Electroplating (D) Calorising

Description : __________ is the process of coating the surface of steel with aluminium oxide, thereby imparting it increased resistance to corrosion & oxidation upto a temperature of 700°C. (A) Veneering (B) Galvanising (C) Electroplating (D) Calorising

Last Answer : (D) Calorising

Ferric stainless steels compared to austenitic stainless steels (A) Have lower corrosion resistance (B) Are harder to fabricate (C) Are less ductile and hence less suitable for cold pressing (D) All (A), (B) and (C)

Description : Ferric stainless steels compared to austenitic stainless steels (A) Have lower corrosion resistance (B) Are harder to fabricate (C) Are less ductile and hence less suitable for cold pressing (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

__________ are used as corrosion inhibitor for iron & steel in aqueous solutions. (A) Phosphates (B) Chromates (C) Sulphates (D) Bi-carbonates

Description : __________ are used as corrosion inhibitor for iron & steel in aqueous solutions. (A) Phosphates (B) Chromates (C) Sulphates (D) Bi-carbonates

Last Answer : (B) Chromates

Electrometallurgical methods of metal extraction is normally used for those metals (A) Whose oxide/ore is not reduced by carbon (B) Which fall in the category of alkali & alkaline earth metals (C) Which stands higher in the electrochemical series of the metal (D) All (A), (B) & (C)

Description : Electrometallurgical methods of metal extraction is normally used for those metals (A) Whose oxide/ore is not reduced by carbon (B) Which fall in the category of alkali & alkaline earth metals (C) Which stands higher in the electrochemical series of the metal (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Wrought iron is having very high (A) Hardness (B) Strength (C) Corrosion resistance (D) Susceptibility to changes in its properties by heat treatment

Description : Wrought iron is having very high (A) Hardness (B) Strength (C) Corrosion resistance (D) Susceptibility to changes in its properties by heat treatment

Last Answer : (C) Corrosion resistance

Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

Specify the material of construction suitable for handling concentrated HNO3 at 100°C. (A) High silicon iron, Kel-F and Teflon (B) Tin and wood (C) Silicone rubber (D) Stainless steel

Description : Specify the material of construction suitable for handling concentrated HNO3 at 100°C. (A) High silicon iron, Kel-F and Teflon (B) Tin and wood (C) Silicone rubber (D) Stainless steel

Last Answer : (A) High silicon iron, Kel-F and Teflon

Phenol is not shipped in (A) Nickel lined steel tank cars (B) Galvanised or tin lined drums (C) Boxed glass carboys (D) Cast iron containers

Description : Phenol is not shipped in (A) Nickel lined steel tank cars (B) Galvanised or tin lined drums (C) Boxed glass carboys (D) Cast iron containers

Last Answer : (D) Cast iron containers

H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin

100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain

Description : 100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain

Last Answer : (C) Aluminium, tin and rubber

Rotary driers are generally made of (A) Cast iron (B) Mild steel (C) High silicon iron (14% Si) (D) Tin lined with refractory bricks

Description : Rotary driers are generally made of (A) Cast iron (B) Mild steel (C) High silicon iron (14% Si) (D) Tin lined with refractory bricks

Last Answer : (B) Mild steel

Which of the following is a low melting point metal? (A) Stainless steel (B) Wrought iron (C) Tin (D) Copper

Description : Which of the following is a low melting point metal? (A) Stainless steel (B) Wrought iron (C) Tin (D) Copper

Last Answer : (C) Tin