With increase in impurities in metals, their corrosion resistances (A) Increase (B) Decrease (C) Remain same (D) May increase or decrease; depending on the type of metal

With increase in impurities in metals, their corrosion resistances (A) Increase
(B) Decrease
(C) Remain same
(D) May increase or decrease; depending on the type of metal
by

1 Answer

Answer :

(B) Decrease
by

Related questions

With increase in temperature, the thermal conductivity of a gas (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of gas

Description : With increase in temperature, the thermal conductivity of a gas (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of gas

Last Answer : (A) Increases

As the C/H ratio of the fuel increases, the amount of CO2 formed on combustion __________ for the same percentage of excess air. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease depending on the type of fuel

Description : As the C/H ratio of the fuel increases, the amount of CO2 formed on combustion __________ for the same percentage of excess air. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease depending on the type of fuel

Last Answer : (B) Increases

As the chemical reaction proceeds, the rate of reaction(A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of reaction

Description : As the chemical reaction proceeds, the rate of reaction (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease depending on the type of reaction

Last Answer : (B) Decreases

The C.O.P. of a refrigeration cycle with lowering of condenser temperature, keeping the evaporator temperatureconstant, will (a) increase (b) decrease (c) may increase or decrease depending on the type of refrigerant used (d) remain unaffected

Description : The C.O.P. of a refrigeration cycle with lowering of condenser temperature, keeping the evaporator temperatureconstant, will (a) increase (b) decrease (c) may increase or decrease depending on the type of refrigerant used (d) remain unaffected

Last Answer : Ans: a

The C.O.P of a refrigeration cycle with increase in evaporator temperature, keeping condenser temperature constant, will (a) increase (b) decrease (c) remain unaffected (d) may increase or decrease depending on the type of refrigerant used

Description : The C.O.P of a refrigeration cycle with increase in evaporator temperature, keeping condenser temperature constant, will (a) increase (b) decrease (c) remain unaffected (d) may increase or decrease depending on the type of refrigerant used

Last Answer : Ans: a

Friction factor for a hydraulically smooth pipe at NRe = 2100 is f1 . If the pipe is further smoothened (i.e., roughness is reduced), the friction factor at the same value of NRe , will (A) Increase (B) Decrease (C) Remain unchanged (D) Increase or decrease depending on the pipe material

Description : Friction factor for a hydraulically smooth pipe at NRe = 2100 is f1 . If the pipe is further smoothened (i.e., roughness is reduced), the friction factor at the same value of NRe , will (A) Increase (B) Decrease (C) Remain unchanged (D) Increase or decrease depending on the pipe material

Last Answer : (A) Increase

If the spring mass system with m and spring stiffness k is taken to very high altitude, the natural frequency of longitudinal vibrations * 1 point (A) increases (B) decreases (C) remain unchanged (D) may increase or decrease depending upon the value of the mass

Description : If the spring mass system with m and spring stiffness k is taken to very high altitude, the natural frequency of longitudinal vibrations * 1 point (A) increases (B) decreases (C) remain unchanged (D) may increase or decrease depending upon the value of the mass

Last Answer : (C) remain unchanged

If the spring mass system with m and spring stiffness k is taken to very high altitude , the natural frequency of longitudinal vibrations A) Increases B) Decreases C) Remain unchanged D) May be increase or decrease depending upon the value of the mass

Description : If the spring mass system with m and spring stiffness k is taken to very high altitude , the natural frequency of longitudinal vibrations A) Increases B) Decreases C) Remain unchanged D) May be increase or decrease depending upon the value of the mass

Last Answer : C) Remain unchanged

The rise or depression of liquid in a tube due to surface tension will increase in size of tube will (A) Increase (B) Remain unaffected (C) May increase or decrease depending on the characteristics of liquid (D) Decrease

Description : The rise or depression of liquid in a tube due to surface tension will increase in size of tube will (A) Increase (B) Remain unaffected (C) May increase or decrease depending on the characteristics of liquid (D) Decrease

Last Answer : Answer: Option D

A bucket of water is hanging from a spring balance. An iron piece is suspended into water without touching sides of bucket from another support. The spring balance reading will (A) Increase (B) Decrease (C) Remain same (D) Increase/decrease depending on depth of immersion

Description : A bucket of water is hanging from a spring balance. An iron piece is suspended into water without touching sides of bucket from another support. The spring balance reading will (A) Increase (B) Decrease (C) Remain same (D) Increase/decrease depending on depth of immersion

Last Answer : Answer: Option C

When a radioisotope undergoes beta minus decay, does its atomic number: w) increase x) decrease y) remain the same z) vary depending on the element involved

Description : When a radioisotope undergoes beta minus decay, does its atomic number: w) increase x) decrease y) remain the same z) vary depending on the element involved

Last Answer : ANSWER: W -- INCREASE

The ideal efficiency of a Brayton cycle with regeneration, with increase in pressure ratio will  (a) increase  (b) decrease  (c) remain unchanged  (d) increase/decrease depending on ap-plication  (e) unpredictable. “

Description : The ideal efficiency of a Brayton cycle with regeneration, with increase in pressure ratio will  (a) increase  (b) decrease  (c) remain unchanged  (d) increase/decrease depending on ap-plication  (e) unpredictable. “

Last Answer : Answer : b

You are flying at a constant FL 290 and a constant mach number. The total temperature increases by 5°. The CAS will: a. Remain approximately constant b. Increase by 10 kts c. Decrease by 10 kts d. Will increase or decrease depending on whether you are above or below ISA

Description : You are flying at a constant FL 290 and a constant mach number. The total temperature increases by 5°. The CAS will: a. Remain approximately constant b. Increase by 10 kts c. Decrease by 10 kts d. Will increase or decrease depending on whether you are above or below ISA

Last Answer : a. Remain approximately constant

You are flying at a constant FL 290 and a constant mach number. The total temperature increases by 5°. The CAS will: a. Remain approximately constant b. Increase by 10 kts c. Decrease by 10 kts d. Will increase or decrease depending on whether you are above or below ISA

Description : You are flying at a constant FL 290 and a constant mach number. The total temperature increases by 5°. The CAS will: a. Remain approximately constant b. Increase by 10 kts c. Decrease by 10 kts d. Will increase or decrease depending on whether you are above or below ISA

Last Answer : a. Remain approximately constant

For a given fluid, as the pipe diameter increases, the pumping cost (A) Decreases (B) Increases (C) Remains the same (D) May increase or decrease, depending upon whether the fluid is Newtonian or non-Newtonian

Description : For a given fluid, as the pipe diameter increases, the pumping cost (A) Decreases (B) Increases (C) Remains the same (D) May increase or decrease, depending upon whether the fluid is Newtonian or non-Newtonian

Last Answer : (A) Decreases

As the impurities are oxidised, the melting point of iron (A) Decreases (B) Remains unchanged (C) Increases (D) May increase or decrease; unpredictable

Description : As the impurities are oxidised, the melting point of iron (A) Decreases (B) Remains unchanged (C) Increases (D) May increase or decrease; unpredictable

Last Answer : (C) Increases

With increase in C/H ratio of a fuel, the dew point of flue gases (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on the type of fuel

Description : With increase in C/H ratio of a fuel, the dew point of flue gases (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on the type of fuel

Last Answer : (B) Decreases

The disintegration rate of a radioactive element (A) Progressively increases (B) Progressively decreases (C) Remains constant throughout (D) May increase or decrease depending on the material

Description : The disintegration rate of a radioactive element (A) Progressively increases (B) Progressively decreases (C) Remains constant throughout (D) May increase or decrease depending on the material

Last Answer : (B) Progressively decreases

With the increase of temperature, the Col-burn jH factor (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depending on temperature

Description : With the increase of temperature, the Col-burn jH factor (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depending on temperature

Last Answer : (A) Increases

Metals of high purity are obtained by zone refining. Impurities are more soluble in melt in pure metal.

Description : Metals of high purity are obtained by zone refining. Impurities are more soluble in melt in pure metal.

Last Answer : Metals of high purity are obtained by zone refining. Impurities are more soluble in melt in pure ... Statement-1 is false but Statement -2 is true

If a piece of metal at -20 degrees Celsius is added to an ice and water mixture in equilibrium at 0 degrees Celsius, the amount of ice will: w) Increase x) Remain the same y) Decrease

Description : If a piece of metal at -20 degrees Celsius is added to an ice and water mixture in equilibrium at 0 degrees Celsius, the amount of ice will: w) Increase x) Remain the same y) Decrease

Last Answer : ANSWER: W -- INCREASE

In β-decay of radioactive material, the ratio of neutron to proton (A) Increases (B) Remain same (C) Decreases (D) Is unpredictable; may increase or decrease

Description : In β-decay of radioactive material, the ratio of neutron to proton (A) Increases (B) Remain same (C) Decreases (D) Is unpredictable; may increase or decrease

Last Answer : (C) Decreases

With lapse of time, the overhead composition of light component in case of batch distillation with constant reflux (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on system

Description : With lapse of time, the overhead composition of light component in case of batch distillation with constant reflux (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on system

Last Answer : (B) Decreases

The feed to fractionating column is changed from saturated vapour to saturated liquid. If the separation and reflux ratio remains unchanged, the number of ideal stages will (A) Increase (B) Decrease (C) Remain same (D) Depend on saturated boiling point; may increase or decrease

Description : The feed to fractionating column is changed from saturated vapour to saturated liquid. If the separation and reflux ratio remains unchanged, the number of ideal stages will (A) Increase (B) Decrease (C) Remain same (D) Depend on saturated boiling point; may increase or decrease

Last Answer : (A) Increase

With increase in the shear rate, the apparent viscosity of pseudo-plastic fluids (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on the magnitude of shear rate

Description : With increase in the shear rate, the apparent viscosity of pseudo-plastic fluids (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease; depends on the magnitude of shear rate

Last Answer : (B) Decreases

The boundary layer thickness at a given section along a flat plate __________ with increasing Reynold's number(A) Increases(B) Decreases(C) Remain same(D) May increase or decrease.

Description : The boundary layer thickness at a given section along a flat plate __________ with increasing Reynold's number. (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease

Last Answer : (B) Decreases

After throttling, gas temperature (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease; depends on the nature of

Description : After throttling, gas temperature (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease; depends on the nature of

Last Answer : (A) Decreases

Latent heat of dry steam at atmospheric pressure is 539 Kcal/kg; which __________ with increase in the pressure of steam. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease

Description : Latent heat of dry steam at atmospheric pressure is 539 Kcal/kg; which __________ with increase in the pressure of steam. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease

Last Answer : (A) Decreases

The atmospheric temperature during melting of ice/snow (in the atmosphere) (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease; depends on the altitude where snow melts Answer

Description : The atmospheric temperature during melting of ice/snow (in the atmosphere) (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease; depends on the altitude where snow melts Answer

Last Answer : A) Decreases

With increase in compression ratio, the volumetric efficiency of air compressor (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease (depends on the suction pressure)

Description : With increase in compression ratio, the volumetric efficiency of air compressor (A) Increases (B) Decreases (C) Remain same (D) May increase or decrease (depends on the suction pressure)

Last Answer : Option A

Which of the following metals in not used for coating of the base metal to guard it against corrosion? (A) Lead (B) Cadmium (C) Magnesium (D) Aluminium

Description : Which of the following metals in not used for coating of the base metal to guard it against corrosion? (A) Lead (B) Cadmium (C) Magnesium (D) Aluminium

Last Answer : (C) Magnesium

Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than chromate coating (C) The base metal to be electroplated is normally made the cathode of the electrolytic cell and coating metal is made the anode (D) Calorising is the process of coating steel with chromium

Description : Pick out the wrong statement about coating/electroplating of metals. (A) Phosphate coating is used as an excellent base for paints & enamels (B) Phosphate coating is less corrosion resistant than ... coating metal is made the anode (D) Calorising is the process of coating steel with chromium

Last Answer : (D) Calorising is the process of coating steel with chromium

In connection with corrosion of metals, passivation is the process that (A) Intensifies deterioration (B) Changes the composition of the metal (C) Inhibits further deterioration (D) None of these

Description : In connection with corrosion of metals, passivation is the process that (A) Intensifies deterioration (B) Changes the composition of the metal (C) Inhibits further deterioration (D) None of these

Last Answer : (C) Inhibits further deterioration

When ice cubes are made, the entropy of water – (1) does not change (2) decreases (3) increases (4) may either increase or decrease depending on the process used

Description : When ice cubes are made, the entropy of water – (1) does not change (2) decreases (3) increases (4) may either increase or decrease depending on the process used

Last Answer : (2) decreases Explanation: When water is frozen into ice, the temperature drops below 0°C. Since the entropy of the solid is less than that of the liquid, the entropy of the water (the system ... decrease is found by dividing the heat of fusion of ice by the temperature for the reversible pathway.

The density of the liquid when heated (1) decreases (2) increases (3) does not change (4) may increase of decrease depending on pressure

Description : The density of the liquid when heated (1) decreases (2) increases (3) does not change (4) may increase of decrease depending on pressure

Last Answer : (1) decreases Explanation: The mass density of a material varies with temperature and pressure. Increasing the temperature of a substance (with some exceptions) decreases its density by increasing the volume of ... bottom to top of the fluid due to the decrease of the density of the heated fluid.

In an isothermal process, the internal energy of gas molecules  (a) increases  (b) decreases  (c) remains constant  (d) may increase/decrease depending on the properties of gas  (e) shows unpredictable behaviour.

Description : In an isothermal process, the internal energy of gas molecules  (a) increases  (b) decreases  (c) remains constant  (d) may increase/decrease depending on the properties of gas  (e) shows unpredictable behaviour.

Last Answer : Answer : c

When ice cubes are made, the entropy of water (1) does not change (2) decreases (3) increases (4) may either increase or decrease depending on the process used

Description : When ice cubes are made, the entropy of water (1) does not change (2) decreases (3) increases (4) may either increase or decrease depending on the process used

Last Answer : decreases

The density of the liquid when heated (1) decreases (2) increases (3) does not change (4) may increase of decrease depending on pressure

Description : The density of the liquid when heated (1) decreases (2) increases (3) does not change (4) may increase of decrease depending on pressure

Last Answer : decreases

Which of the following is correct? a. The evidence which the auditor accumulates remains the same from audit to audit, but the general objectives vary, depending on the circumstances. b. The general audit objectives remain the same from audit to audit, but the evidence varies, depending on the circumstances. c. The circumstances may vary from audit to audit, but the evidence accumulated remains the samed. The general audit objectives may varyfrom audit to audit, but thecircumstances remain the same.

Description : Which of the following is correct? a. The evidence which the auditor accumulates remains the same from audit to audit, but the general objectives vary, depending on the circumstances. b. The ... The general audit objectives may vary from audit to audit, but the circumstances remain the same.

Last Answer : The general audit objectives remain the same from audit to audit, but the evidence varies, depending on the circumstances

With increase in calorific value of fuels, their adiabatic flame temperatures (A) Increase (B) Decrease (C) Remain unchanged (D) May increase or decrease; depends on the quantity of products of combustion

Description : With increase in calorific value of fuels, their adiabatic flame temperatures (A) Increase (B) Decrease (C) Remain unchanged (D) May increase or decrease; depends on the quantity of products of combustion

Last Answer : (D) May increase or decrease; depends on the quantity of products of combustion

For the case of a fuel gas undergoing combustion with air, if the air/fuel ratio is increased, the adiabatic flame temperature will (A) Increase (B) Decrease (C) Increase or decrease depending on the fuel type (D) Not change

Description : For the case of a fuel gas undergoing combustion with air, if the air/fuel ratio is increased, the adiabatic flame temperature will (A) Increase (B) Decrease (C) Increase or decrease depending on the fuel type (D) Not change

Last Answer : (B) Decrease

(1) they contain free electrons Explanation: Metals typically consist of closepacked atoms, meaning that the atoms are arranged like closely packed spheres. Two packing motifs are common, one being bodycentered cubic wherein each metal atom is surrounded by eight equivalent atoms. The other main motif is face-centered cubic where the metal atoms are surrounded by six neighboring atoms. Several metals adopt both structures, depending on the temperature.

Description : (1) they contain free electrons Explanation: Metals typically consist of closepacked atoms, meaning that the atoms are arranged like closely packed spheres. Two packing motifs are common, one ... surrounded by six neighboring atoms. Several metals adopt both structures, depending on the temperature.

Last Answer : Helium gas is filled in ballons because (1) its atomic number is 2 (2) it is lighter than air (3) it is one of the constitutents of water (4) it is a noble gas

When a bond is formed between two atoms, the energy of the sys-tem will – (1) increase (2) decrease (3) remain the same (4) may increase or decrease

Description : When a bond is formed between two atoms, the energy of the sys-tem will – (1) increase (2) decrease (3) remain the same (4) may increase or decrease

Last Answer : (3) remain the same Explanation: The fundamental reason for the bonding of atoms is that they lose their stored potential energy by forming bonds. This is the only reason for chemical combination. ... a bond is formed between two atoms, stored potential enemy is always released to the surroundings.

When a bond is formed between two atoms, the energy of the system will (1) increase (2) decrease (3) remain the same (4) may increase or decrease

Description : When a bond is formed between two atoms, the energy of the system will (1) increase (2) decrease (3) remain the same (4) may increase or decrease

Last Answer :  remain the same

A solid ball of metal has a spherical cavity inside it. When the ball is heated the volume of the cavity will - (1) increase (2) decrease (3) remain unaffected (4) have its shape changed

Description : A solid ball of metal has a spherical cavity inside it. When the ball is heated the volume of the cavity will - (1) increase (2) decrease (3) remain unaffected (4) have its shape changed

Last Answer : (1) increase Explanation: The metal ball can be considered to be made up of several layers of thinner ones. On heating each of these layers will increase in radius.

A solid ball of metal has a spherical cavity inside it. When the ball is heated the volume of the cavity will - (1) Increase (2) decrease (3) remain unaffected (4) have its shape changed

Description : A solid ball of metal has a spherical cavity inside it. When the ball is heated the volume of the cavity will - (1) Increase (2) decrease (3) remain unaffected (4) have its shape changed

Last Answer : (1) Increase Explanation: The metal ball can be considered to be made up of several layers of thinner ones. On heating each of these layers will increase in radius. As the inner most layer also increases its radius, the volume inside it i.e, the volume of the hollow portion will also increase.

A metal plate with a circular hole at the centre is heated. What will happen to the area of the hole? (1) Increase (2) Decrease (3) Remain constant (4) Will increase first and then decrease

Description : A metal plate with a circular hole at the centre is heated. What will happen to the area of the hole? (1) Increase (2) Decrease (3) Remain constant (4) Will increase first and then decrease

Last Answer : (1) Increase Explanation: Assuming the disc is uniform and isotropic (the same in different directions), the hole will expand in the same ratio as the metal. It is because the thermal expansion equation ... is made out of metal. And if the circumference of the hole expands, so does the diameter.

Temperature of the product during ultrafine grinding (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material being ground

Description : Temperature of the product during ultrafine grinding (A) Increases (B) Decreases (C) Remain constant (D) May increase or decrease; depends on the material being ground

Last Answer : (A) Increases

The filtrate flow rate in constant pressure filtration (A) Continuously increases (B) Continuously decreases (C) Remain constant throughout (D) May increase or decrease; depends on the pressure

Description : The filtrate flow rate in constant pressure filtration (A) Continuously increases (B) Continuously decreases (C) Remain constant throughout (D) May increase or decrease; depends on the pressure

Last Answer : (B) Continuously decreases

At constant temperature, the thermal conductivities of gases__________ with rise in pressure.(A) Decrease(B) Increase(C) Remain unchanged(D) May increase or decrease; depends on the pressure

Description : At constant temperature, the thermal conductivities of gases__________ with rise in pressure. (A) Decrease (B) Increase (C) Remain unchanged (D) May increase or decrease; depends on the pressure

Last Answer : (A) Decrease