Thermometer bulb & capillary in case of mercury filled pressure spring expansion thermometer is normally made of __________ as mercury does not amalgamate with it. (A) Copper (B) Copper alloys (C) Stainless steel (D) Monel

Thermometer bulb & capillary in case of mercury filled pressure
spring expansion thermometer is normally made of __________ as mercury
does not amalgamate with it.
(A) Copper
(B) Copper alloys
(C) Stainless steel
(D) Monel
by

1 Answer

Answer :

(C) Stainless steel
by

Related questions

The high expansion metal normally used in the bimetallic thermometer is __________ temperature measurement. (A) Brass for low (B) Nickel alloys for high (C) Both 'a' & 'b' (D) Aluminium for all

Description : The high expansion metal normally used in the bimetallic thermometer is __________ temperature measurement. (A) Brass for low (B) Nickel alloys for high (C) Both 'a' & 'b' (D) Aluminium for all

Last Answer : (C) Both 'a' & 'b'

Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

Nickel base alloys with __________ are known as monel metal. (A) Zinc (B) Tin (C) Copper (D) Molybdenum

Description : Nickel base alloys with __________ are known as monel metal. (A) Zinc (B) Tin (C) Copper (D) Molybdenum

Last Answer : (C) Copper

Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber, Kel-F and Teflon (B) Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon

Which of the following is not used as a filter medium in case of corrosive liquids? (A) Nylon (B) Glass cloth (C) Metal cloth of monel or stainless steel (D) Cotton fabric

Description : Which of the following is not used as a filter medium in case of corrosive liquids? (A) Nylon (B) Glass cloth (C) Metal cloth of monel or stainless steel (D) Cotton fabric

Last Answer : (D) Cotton fabric

The material of construction of pressure mills used for squeezing out the juice from sugar cane is (A) Stainless steel (B) Cast iron (C) Mild steel (D) Monel

Description : The material of construction of pressure mills used for squeezing out the juice from sugar cane is (A) Stainless steel (B) Cast iron (C) Mild steel (D) Monel

Last Answer : (B) Cast iron

Metallic surveying tapes are made of __________ which has a low co efficient of expansion & enough strength. (A) Invar (B) Hastelloy (C) Duralumin (D) Monel metal

Description : Metallic surveying tapes are made of __________ which has a low co efficient of expansion & enough strength. (A) Invar (B) Hastelloy (C) Duralumin (D) Monel metal

Last Answer : (A) Invar

Pick out the wrong statement. (A) Metal/alloys having hexagonal crystal lattice structure are less malleable than those having cubic crystal lattice structure (B) Metal/alloys having body centred cubic (bcc) crystal lattice structure is stronger & less ductile than those having face centred cubic (fcc) crystal lattice structure (C) Tungsten has a body centred cubic (bcc) crystal lattice structure (D) Both ferritic & austenitic stainless steel has a face centred cubic (fcc) crystal structure

Description : Pick out the wrong statement. (A) Metal/alloys having hexagonal crystal lattice structure are less malleable than those having cubic crystal lattice structure (B) Metal/alloys having body centred cubic ... D) Both ferritic & austenitic stainless steel has a face centred cubic (fcc) crystal structure

Last Answer : (C) Tungsten has a body centred cubic (bcc) crystal lattice structure

Which of the following would not be a suitable material of construction for handling aqueous hydrofluoric acid (HF) at 100°C? (A) Monel (B) Stainless steel (C) Graphite (D) Kel-F and Teflon

Description : Which of the following would not be a suitable material of construction for handling aqueous hydrofluoric acid (HF) at 100°C? (A) Monel (B) Stainless steel (C) Graphite (D) Kel-F and Teflon

Last Answer : (B) Stainless steel

A suitable material of construction to use with fuming sulphuric acid is (A) Carbon steel (B) Stainless steel type 304 (C) Nickel (D) Monel

Description : A suitable material of construction to use with fuming sulphuric acid is (A) Carbon steel (B) Stainless steel type 304 (C) Nickel (D) Monel

Last Answer : (D) Monel

Acetylene gas holder is made of (A) Copper (B) Cast iron (C) Steel (D) Monel metal

Description : Acetylene gas holder is made of (A) Copper (B) Cast iron (C) Steel (D) Monel metal

Last Answer : (C) Steel

Which of the following alloys does not contain nickel? (A) Chlorinet - 2 alloy (B) Monel (C) Inconel (D) Babbitt metal

Description : Which of the following alloys does not contain nickel? (A) Chlorinet - 2 alloy (B) Monel (C) Inconel (D) Babbitt metal

Last Answer : (D) Babbitt metal

Which of the following alloys does not contain nickel? (A) Chloro, et-2 alloy (B) Monel (C) Inconel (D) Babbitt metal

Description : Which of the following alloys does not contain nickel? (A) Chloro, et-2 alloy (B) Monel (C) Inconel (D) Babbitt metal

Last Answer : (D) Babbitt metal

Nickel (76%) and chromium (15%) alloys are termed as (A) Inconel (B) Monel (C) Aluminium bronzes (D) Brass

Description : Nickel (76%) and chromium (15%) alloys are termed as (A) Inconel (B) Monel (C) Aluminium bronzes (D) Brass

Last Answer : (A) Inconel

Most suitable material of construction for the storage of concentrated nitric acid is (A) Cast iron (B) Monel (C) Karbate (D) Aluminium or chromium alloys (Cr > 18% for cold acid)

Description : Most suitable material of construction for the storage of concentrated nitric acid is (A) Cast iron (B) Monel (C) Karbate (D) Aluminium or chromium alloys (Cr > 18% for cold acid)

Last Answer : (D) Aluminium or chromium alloys (Cr > 18% for cold acid)

Nickel (56%) and molybdenum (17%) alloys are called (A) Monel (B) Hastelloy C (C) Inconel (D) Bronzes

Description : Nickel (56%) and molybdenum (17%) alloys are called (A) Monel (B) Hastelloy C (C) Inconel (D) Bronzes

Last Answer : (B) Hastelloy C

Monel alloy is (A) The costliest of all the alloys of nickel (B) Not suitable for making kitchen utensils (C) Used for making steam valves and turbine blades as it resists steam attack at high temperature (D) Not used in cast and wrought forms

Description : Monel alloy is (A) The costliest of all the alloys of nickel (B) Not suitable for making kitchen utensils (C) Used for making steam valves and turbine blades as it resists steam attack at high temperature (D) Not used in cast and wrought forms

Last Answer : (C) Used for making steam valves and turbine blades as it resists steam attack at high temperature

Stainless steel contains which of the following? (a) Aluminium and Zinc (b) Chromium and Carbon (c) Zinc and Mercury (d) Copper and Cadmium

Description : Stainless steel contains which of the following? (a) Aluminium and Zinc (b) Chromium and Carbon (c) Zinc and Mercury (d) Copper and Cadmium

Last Answer : Ans:(b)

Dilute sulphuric acid is transported in __________ pipes. (A) Mild steel (B) Lead (C) Copper (D) Special alloys

Description : Dilute sulphuric acid is transported in __________ pipes. (A) Mild steel (B) Lead (C) Copper (D) Special alloys

Last Answer : (B) Lead

A steel alloy containing 36% nickel is called __________, which has a zero co-efficient of expansion. (A) Austenitic stainless steel (B) Heat resisting steel (C) Invar (D) High speed steel

Description : A steel alloy containing 36% nickel is called __________, which has a zero co-efficient of expansion. (A) Austenitic stainless steel (B) Heat resisting steel (C) Invar (D) High speed steel

Last Answer : (C) Invar

A breakable, mercury-filled thermometer should not be used in a lead-acid battery to measure electrolyte temperature, as an accidental breakage can cause ____________. A. severe sparking and explosions B. rapid oxidation of battery plates C. violent gassing at the positive plates D. corrosion on the battery terminals

Description : A breakable, mercury-filled thermometer should not be used in a lead-acid battery to measure electrolyte temperature, as an accidental breakage can cause ____________. A. severe sparking and explosions ... battery plates C. violent gassing at the positive plates D. corrosion on the battery terminals

Last Answer : Answer: A

Mercury filled thermometers should never be used to determine the temperature of the battery electrolyte because accidental breakage of the thermometer can cause __________________. A. severe sparking and explosions B. rapid oxidation of battery plates C. contamination of the electrolyte D. corrosion on the battery terminals

Description : Mercury filled thermometers should never be used to determine the temperature of the battery electrolyte because accidental breakage of the thermometer can cause __________________. A. severe sparking and ... of battery plates C. contamination of the electrolyte D. corrosion on the battery terminals

Last Answer : Answer: A

For hard facing base alloys used are a) high carbon steel b) high carbon iron c) carbon steel d) stainless steel

Description : For hard facing base alloys used are a) high carbon steel b) high carbon iron c) carbon steel d) stainless steel

Last Answer : b) high carbon iron

Valves in pipe size of 2" and under are normally made of (A) Wrought iron (B) Brass (C) Bronze (D) Monel

Description : Valves in pipe size of 2" and under are normally made of (A) Wrought iron (B) Brass (C) Bronze (D) Monel

Last Answer : (B) Brass

Supporting legs of a plate and frame filter is normally made of (A) Stainless steel (B) Cast iron (C) High speed steel (D) Wooden plank

Description : Supporting legs of a plate and frame filter is normally made of (A) Stainless steel (B) Cast iron (C) High speed steel (D) Wooden plank

Last Answer : (B) Cast iron

The shafts are made of a. mild steel b. alloy steel c. copper alloys d. cast iron.

Description : The shafts are made of a. mild steel b. alloy steel c. copper alloys d. cast iron.

Last Answer : d. cast iron.

__________ does not contain copper as an alloying element, (A) Nichrome (B) Manganin (C) Perminvar (D) Monel metal

Description : __________ does not contain copper as an alloying element, (A) Nichrome (B) Manganin (C) Perminvar (D) Monel metal

Last Answer : (A) Nichrome

Locomotive boiler tubes are made of __________ alloys. (A) Arsenic copper (B) Magnesium (C) Aluminium (D) Nickel

Description : Locomotive boiler tubes are made of __________ alloys. (A) Arsenic copper (B) Magnesium (C) Aluminium (D) Nickel

Last Answer : (A) Arsenic copper

Spark plugs, ignition tubes and electrodes are made of nickel __________ alloys. (A) Beryllium (B) Manganese (C) Copper (D) Iron

Description : Spark plugs, ignition tubes and electrodes are made of nickel __________ alloys. (A) Beryllium (B) Manganese (C) Copper (D) Iron

Last Answer : (B) Manganese

For the case of flow of air past a wet bulb thermometer (air water vapour system), the approximate value of h2 /ky .Cz is around (A) 0.60 (B) 0.24 (C) 1 (D) 0.72

Description : For the case of flow of air past a wet bulb thermometer (air water vapour system), the approximate value of h2 /ky .Cz is around (A) 0.60 (B) 0.24 (C) 1 (D) 0.72

Last Answer : (C) 1

H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin

For platinum thermocouples, lead wires are made of (A) Copper & copper-nickel alloys (B) Copper & iron (C) Iron & nickel (D) Tin & nickel

Description : For platinum thermocouples, lead wires are made of (A) Copper & copper-nickel alloys (B) Copper & iron (C) Iron & nickel (D) Tin & nickel

Last Answer : (A) Copper & copper-nickel alloys

Fermenter used in the production of penicillin by deep fermentation process is a __________ lined steel vessel (A) Rubber (B) Monel (C) Glass (D) Nickel

Description : Fermenter used in the production of penicillin by deep fermentation process is a __________ lined steel vessel (A) Rubber (B) Monel (C) Glass (D) Nickel

Last Answer : (C) Glass

Tubes of multiple effect evaporator used for concentration of sugar cane juice are made of (A) Nickel (B) Copper (C) Stainless steel (D) Brass

Description : Tubes of multiple effect evaporator used for concentration of sugar cane juice are made of (A) Nickel (B) Copper (C) Stainless steel (D) Brass

Last Answer : (B) Copper

The 'bomb' in the bomb calorimeter is made of (A) Molybdenum stainless steel(B) Mild steel(C) High silicon iron (14% Si)(D) Copper

Description : The 'bomb' in the bomb calorimeter is made of (A) Molybdenum stainless steel (B) Mild steel (C) High silicon iron (14% Si) (D) Copper

Last Answer : (A) Molybdenum stainless steel

Copper is dissolved from its ore by H2SO4 in a percolation tank made of (A) Wood (B) Stainless steel (C) Reinforced concrete lined with lead (D) High silicon iron (14% Si)

Description : Copper is dissolved from its ore by H2SO4 in a percolation tank made of (A) Wood (B) Stainless steel (C) Reinforced concrete lined with lead (D) High silicon iron (14% Si)

Last Answer : (C) Reinforced concrete lined with lead

Neutraliser tank used for reacting nitric acid with ammonia for the production of ammonium nitrate is made of (A) Aluminium (B) Stainless steel (C) High silicon (14%) iron (D) Copper

Description : Neutraliser tank used for reacting nitric acid with ammonia for the production of ammonium nitrate is made of (A) Aluminium (B) Stainless steel (C) High silicon (14%) iron (D) Copper

Last Answer : (B) Stainless steel

Heat exchanger tubes are never made of (A) Plain carbon steel (B) Stainless steel (C) Lead (D) Copper

Description : Heat exchanger tubes are never made of (A) Plain carbon steel (B) Stainless steel (C) Lead (D) Copper

Last Answer : (C) Lead

The joint for soldering is supported by binding wire made of (A) Mild steel (B) Copper (C) Soft iron (D) Stainless steel

Description : The joint for soldering is supported by binding wire made of (A) Mild steel (B) Copper (C) Soft iron (D) Stainless steel

Last Answer : Option C

The capillary rise of mercury is maximum in glass tube of dia __________ mm. (A) 0.5 (B) 1 (C) 2 (D) 5

Description : The capillary rise of mercury is maximum in glass tube of dia __________ mm. (A) 0.5 (B) 1 (C) 2 (D) 5

Last Answer : (A) 0.5

The wet bulb temperature is lower in dry air than in wet air at the same temperature. A dry bulb thermometer registers a higher temperature than a wet bulb thermometer except at __________ percent relative humidity. (A) 0 (B) 100 (C) 50 (D) None of these

Description : The wet bulb temperature is lower in dry air than in wet air at the same temperature. A dry bulb thermometer registers a higher temperature than a wet bulb thermometer except at __________ percent relative humidity. (A) 0 (B) 100 (C) 50 (D) None of these

Last Answer : Option B

Mercury is an ideal barometric fluid mainly due to its(A) High density (B) Low compressibility (C) Low capillary action (D) Very low vapor pressure

Description : Mercury is an ideal barometric fluid mainly due to its (A) High density (B) Low compressibility (C) Low capillary action (D) Very low vapor pressure

Last Answer : (D) Very low vapor pressure

__________ glass is used in the mercury in glass thermometer meant for measuring a temperature of 500°C. (A) Borosilicate (B) High silica (C) Supermax (D) Lead

Description : __________ glass is used in the mercury in glass thermometer meant for measuring a temperature of 500°C. (A) Borosilicate (B) High silica (C) Supermax (D) Lead

Last Answer : (C) Supermax

Muntz metal is a/an alloys of (A) Magnesium & tin (B) Ferrous material (C) Lead & tin (D) Copper & zinc

Description : Muntz metal is a/an alloys of (A) Magnesium & tin (B) Ferrous material (C) Lead & tin (D) Copper & zinc

Last Answer : (D) Copper & zinc

Stainless steel is usually made by alloying the steel with – (1) copper and nickel (2) copper and chromium (3) chromium and nickel (4) manganese and copper

Description : Stainless steel is usually made by alloying the steel with – (1) copper and nickel (2) copper and chromium (3) chromium and nickel (4) manganese and copper

Last Answer : (3) chromium and nickel Explanation: In metallurgy, stainless steel is defined as a steel alloy with a minimum of 10.5 per cent to 11 per cent chromium content by mass. There are ... virtually nonmagnetic and less brittle at low temperatures. For greater hardness and strength, more carbon is added.

Stainless steel is usually made by alloying the steel with (1) copper and nickel (2) copper and chromium (3) chromium and nickel (4) manganese and copper

Description : Stainless steel is usually made by alloying the steel with (1) copper and nickel (2) copper and chromium (3) chromium and nickel (4) manganese and copper

Last Answer : chromium and nickel 

__________ alloys have the highest specific strength of all the structural materials out of the following. (A) Magnetic steel (B) Titanium (C) Chromium (D) Magnesium

Description : __________ alloys have the highest specific strength of all the structural materials out of the following. (A) Magnetic steel (B) Titanium (C) Chromium (D) Magnesium

Last Answer : (B) Titanium

Steel rods are normally used for concrete reinforcement because concrete and steel have almost equal (A) Tensile strength (B) Compressive strength (C) Young's modulus (D) Thermal co-efficient of expansion

Description : Steel rods are normally used for concrete reinforcement because concrete and steel have almost equal (A) Tensile strength (B) Compressive strength (C) Young's modulus (D) Thermal co-efficient of expansion

Last Answer : (D) Thermal co-efficient of expansion

Which of the following is not a copper based alloy with nickel? (A) German silver (B) Monel metal (C) Inconel (D) Constantan

Description : Which of the following is not a copper based alloy with nickel? (A) German silver (B) Monel metal (C) Inconel (D) Constantan

Last Answer : (C) Inconel