Description : Out of the following, copper vessels are the most suitable for the storage of (A) Bromine (B) Dry chlorine & dry fluorine (C) Nitric acid (95% and fuming) (D) Phosphoric acid (95%) & sulphuric acid (95% and fuming)
Last Answer : (B) Dry chlorine & dry fluorine
Description : Containers made of high silicon cast iron (14% Si) are not suitable for the storage of (A) Acetic acid (B) Benzoic & boric acids (C) Phosphoric acid (95%) & sulphuric acid (95%) (D) Hydrochloric acid (concentrated)
Last Answer : (D) Hydrochloric acid (concentrated)
Description : Mild steel storage vessels are suitable for the storage of (A) Anhydrous ammonia (B) Fatty acids (C) Hydrochloric acid (95%) (D) Sulphuric acid (25%)
Last Answer : (A) Anhydrous ammonia
Description : For handling sulphuric acid of 95% strength, the suitable material of construction for pipes is (A) Stainless steel (B) Cast iron (C) Aluminium (D) Nickel
Last Answer : (B) Cast iron
Description : Brass container is suitable for storing (A) Aqueous ammonia (B) Beer (C) H2SO4 (95%) (D) Phosphoric acid (95%)
Last Answer : (B) Beer
Description : Pyridine undergoes electrophilic substitution with fuming H2SO4 at 350°C to give (a) 2-Pyridinesulfonic acid (b) 4-Pyridinesulfonic acid (c) 3-Pyridinesulfonic acid (d) None of these
Last Answer : 3-Pyridinesulfonic acid
Description : Pick out the wrong statement. (A) Dehydration of ammonium carbamate to produce urea is endothermic (B) Direct use of liquid ammonia as a fertiliser for a tropical country like India ... manufacture of ortho-phosphoric acid (D) Phosphate rock when reacted with dilute H2SO4 produces superphosphate
Last Answer : (B) Direct use of liquid ammonia as a fertiliser for a tropical country like India is suitable
Description : During manufacture of H2SO4 , the oxidation of SO2 to SO3 by oxygen is an endothermic reaction. The yield of SO3 will be maximised, if the (A) Temperature is increased (B) Pressure is reduced (C) Temperature is increased and pressure is reduced (D) Temperature is reduced and pressure is increased
Last Answer : (D) Temperature is reduced and pressure is increased
Description : In the converter of the contact process for the manufacture of H2SO4 the equilibrium conversion of SO2__________ (i) __________ with increase in temperature and __________ (ii) __________ with increase in the mole ratio ... increases (C) (i) increases (ii) increases (D) (i) decreases (ii) decreases
Last Answer : (B) (i) decreases (ii) increases
Description : A suitable material of construction to use with fuming sulphuric acid is (A) Carbon steel (B) Stainless steel type 304 (C) Nickel (D) Monel
Last Answer : (D) Monel
Description : Most suitable material of construction for the storage of concentrated nitric acid is (A) Cast iron (B) Monel (C) Karbate (D) Aluminium or chromium alloys (Cr > 18% for cold acid)
Last Answer : (D) Aluminium or chromium alloys (Cr > 18% for cold acid)
Description : SO3 is absorbed using H2SO4 in a (A) Cast iron packed tower (B) Stainless steel plate tower (C) Packed steel tower lined with acid proof bricks (D) None of these
Last Answer : (C) Packed steel tower lined with acid proof bricks
Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware
Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin
Description : 100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain
Last Answer : (C) Aluminium, tin and rubber
Description : Berl saddle made of carbon cannot be used for (A) Alkalis (B) SO2 (C) H2SO4 (D) Oxidising atmosphere
Last Answer : (D) Oxidising atmosphere
Description : 10% oleum comprises of 10% free (A) SO2 (B) H2SO3 (C) SO3 (D) H2SO4
Last Answer : (C) SO3
Description : More than 100 percent of __________ is present in oleum. (A) SO3 (B) H2SO4 (C) H2SO3 (D) SO2
Last Answer : (B) H2SO4
Description : Oleum produces fumes of (A) SO2 (B) H2SO4 (C) SO3 (D) SO2 + H2SO4
Description : In the manufacture of H2SO4 , vanadium catalyst as compared to platinum catalyst (A) Gives higher conversion efficiency (B) Has a longer life and is not poisoned by arsenic (C) Handles lower SO2 content gas (7 -10% SO2 ), thus increasing the capital cost of the plant (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Rubber lined vessels are corroded by the action of (A) Aqua regia (B) Chloroform (C) Sulphuric acid (95%) (D) All (A), (B) and (C)
Description : Hydrocyanic acid is not shipped in (A) Cast iron vessels (B) Steel cylinders (C) Aluminium containers (D) Monel drums
Last Answer : (A) Cast iron vessels
Description : In the manufacture of ortho-phosphoric acid by strong H2SO4 leaching wet process, keeping the reactor temperature above 100°C, results in the formation of undesirable (A) CaSO4 .½ H2O and CaSO4 crystals (B) Pyrophosphoric acid (C) Meta-phosphoric acid (D) All (A), (B) and (C)
Last Answer : (A) CaSO4 .½ H2O and CaSO4 crystals
Description : Sulphur containing amino acids after catabolism produces a substance which is excreted: (A) SO2 (B) HNO3 (C) H2SO4 (D) H3PO4
Last Answer : Answer : C
Description : The major use of sulphur is in the manufacture of – (1) H2SO4 (2) H2S (3) SO2 (4) Fungicide
Last Answer : (1) H2SO4 Explanation: The major use of sulphur is in the manufacture of sulphuric acid (H2SO4) which is one of the most important compounds made by the chemical industry. It is used to make, literally, hundreds of compounds needed by almost every industry.
Description : Which of the following reagents will react with furan to form 2-furansulfonic acid? (a) SO3 in pyridine at 100°C (b) Dilute H2SO4 at 200°C (c) SO2 at 100°C (d) Dilute H2SO4 at 100°C
Last Answer : SO3 in pyridine at 100°C
Description : Glass lined vessels are not used for handling (A) Dilute H2SO4 (B) Dilute HNO3 (C) Dilute HCI (D) Hydrofluoric acid
Last Answer : (D) Hydrofluoric acid
Description : Glass lined vessels are not used for handling/storing (A) Dilute H2SO4 (B) Dilute HNO3 (C) Dilute HCl (D) Hydrofluoric acid
Description : Polythene (low or high density) containers are not corroded by (A) Sulphuric acid (10%) at room temperature (B) Nitric acid (95%) at room temperature (C) Sulphur trioxide at 60°C (D) Any of these
Last Answer : (A) Sulphuric acid (10%) at room temperature
Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel
Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon
Description : Centrifugal pump made of pyrex or glass can't be used to pump (A) Milk and fruit juices (B) Alkaline solutions (C) Dilute H2SO4 at room temperature (D) Brine
Last Answer : (B) Alkaline solutions
Description : Phosphoric acid is produced in wet process from phosphate rock and (A) Dilute H2SO4 (B) Concentrated H2SO4 (C) Concentrated NHO3 (D) Concentrated HCl
Last Answer : (A) Dilute H2SO4
Description : Wet chlorine gas produced during electrolysis of brine is dehydrated by (A) Spraying 66° Be H2SO4 counter current to the flow of the gas (B) Passing it through a bed of diatomaceous earth (C) Passing it through a bed of silica gel (D) None of these
Last Answer : (A) Spraying 66° Be H2SO4 counter current to the flow of the gas
Description : Wood is corroded by (A) Hydrochloric acid (B) SO2 (dry or wet) (C) Chlorine (dry or wet) (D) All (A), (B) and (C)
Description : Which of the following is the most suitable material of construction for evaporator & its tubes for concentrating NaOH solution to 70%? (A) Cast iron (B) Steel (C) Nickel (D) Karbate
Last Answer : (C) Nickel
Description : _________ pipe is the most suitable for carrying sanitary drainage. (A) Stainless steel (B) Reinforced cement concrete (C) Cast iron (D) Asbestos cement
Last Answer : C) Cast iron
Description : Cemented carbide tools are not suitable for cutting (A) Aluminium (B) Brass (C) Cast iron (D) Steel
Last Answer : (A) Aluminium
Description : An ideal material of construction for the storage of 50% caustic soda solution would be (A) Karbate (B) High silicon cast iron (C) Monel (D) None of these
Last Answer : (C) Monel
Description : Name TWO sorbents which are used in conventional wet scrubbing processes to remove SO2 produced by combusting coal.
Last Answer : (1) LIME (2) LIMESTONE (3) SODIUM SULFITE OR NaCO3 OR NaOH
Description : Is a cast iron grill suitable for use on an electric stove?
Last Answer : Cast iron grill will work on electric stove. A cast iron grill is heavy and typically has a flat bottom that promotes even. Since a cast iron grill is one solid piece of metal that typically has a handle as part of the design, it has no parts that can loosen or break.
Description : Cast iron piles (A) Are suitable for works under sea water (B) Resist shocks or vibrations (C) Are suitable for use as batter piles (D) Are useful for heavy vertical loads
Last Answer : Option D
Last Answer : Answer: Option D
Description : Which material is suitable for shaft material? a. High speed steel b. Stainless steel or high carbon steel c. Grey cast iron d. Steel having approx. 0.4% carbon and 0.8% manganese
Last Answer : d. Steel having approx. 0.4% carbon and 0.8% manganese
Description : Monel alloy is (A) The costliest of all the alloys of nickel (B) Not suitable for making kitchen utensils (C) Used for making steam valves and turbine blades as it resists steam attack at high temperature (D) Not used in cast and wrought forms
Last Answer : (C) Used for making steam valves and turbine blades as it resists steam attack at high temperature
Description : Aluminium alloy is one of the most suitable materials of construction for aircrafts mainly due to its (A) High strength to weight ratio (B) Low temperature strength properties (C) Its ability ... rolled, forged & stamped (D) High strength and corrosion & oxidation-resistance at elevated temperature
Last Answer : (A) High strength to weight ratio
Description : What is the trade name for fuming sulfuric acid or smoked sulfuric acid ?
Last Answer : Answer : The trade name for fuming sulfuric acid or smoked sulfuric acid is olium.
Description : What is the primary hazard for nitric acid red fuming?
Last Answer : Need answer
Description : What is a red highly reactive fuming liquid with a foul smell?
Last Answer : bromine
Description : Vinegar is prepared by the _____. A. Fuming of date palms B. Fermentation of rotten grapes C. Fermentation of apple cider in the presence of air D. Dehydration of wine
Last Answer : ANSWER: B
Description : Any suggestions for care and long-term storage of cast-iron cookware?
Last Answer : If they are seasoned properly, you do not need to oil them.
Description : Why does a cast iron tub feel colder than anything else in a room?
Last Answer : answer:A material feels cold to the touch at a high heat conductivity coefficient; because a material with a high heat conductivity coefficient extracts heat from the body at a fast rate. ... long way http://www.materia.nl/583.0.html?&tx_ttnews[tt_news]=88&tx_ttnews[backPid]=532&cHash=9e7e52c586