Description : Presence of manganese in alloy steel improves its (A) Corrosion resistance (B) Cutting ability (C) Abrasion resistance & toughness (D) Elasticity & creep resistance
Last Answer : (C) Abrasion resistance & toughness
Description : Ability of a material to absorb energy in deformation in the plastic range is characterised as its (A) Ductility (B) Toughness (C) Creep (D) Resilience
Last Answer : (B) Toughness
Description : On decreasing the grain size of a polycrystalline material, the property most likely to deteriorate is (A) Creep (B) Toughness (C) Tensile strength (D) Fatigue
Last Answer : (B) Toughnes
Description : Pick out the correct statement. (A) Hot worked materials are subjected to annealing to remove internal stresses (B) Annealing of steel hardens it slightly (C) Normalising of a material induces stresses (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness
Last Answer : (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness Share
Description : Reduction in the grain size reduces the __________ of the material. (A) Fatigue resistance (B) Tensile strength (C) Creep resistance (D) All (A), (B) & (C)
Last Answer : (C) Creep resistance
Last Answer : (D) All (A), (B) & (C)
Description : Young's modulus of a material is the measure of its (A) Stiffness (B) Malleability (C) Creep resistance (D) Tensile strength
Last Answer : Option A
Description : Which of the following is measure of stiffness? a) Modulus of elasticity b) Modulus of plasticity c) Resilience d) Toughness
Last Answer : a) Modulus of elasticity
Description : Pick out the wrong statement. (A) Lead can creep under its own weight at room temperature (B) The electrical conductivity of gold is considerably reduced by alloying additions due to ... metal (D) With increase in temperature, the electrical conductivity of intrinsic semi-conductor will increase
Last Answer : (C) Recrystallisation temperature decreases with decrease in strain in a cold worked metal
Description : Pick out the wrong statement (A) A horizontal line on the humidity chart indicates the temperature changes at constant molal humidity (B) When water is cooled from 80 to 70°C by exposure ... & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure
Last Answer : (D) Relative saturation of unsaturated mixture of water vapor & air cannot be increased by either reducing the mixture temperature or by increasing the total pressure
Description : Stainless steel is welded with difficulty because of (A) Its high melting temperature (B) Chances of cracking (C) Oxide film formation (D) Chromium carbide formation
Last Answer : Option C
Description : Presence of high amount of silicon in cast iron (A) Suppresses the decomposition of Fe3C (B) Increases the formation of graphite (C) Increases the contraction of the metal (D) Reduces its fluidity
Last Answer : (B) Increases the formation of graphite
Description : Which metal does not undergo corrosion due to the formation of oxide layer? (1) Copper (2) Iron (3) Aluminium (4) Zinc
Last Answer : Aluminium
Description : Pick out the wrong statement. (A) Addition of methane to the furnace atmosphere reduces decarburising by hydrogen (B) Nitrogen in presence of steam decor-burises high carbon steel, whereas hydrocarbon ... the metal surface) cause nitride formation with increase in surface hardness (D) None of these
Last Answer : (D) None of these
Description : Chrome vanadium steels usually contain 0.8 to 1.1% Cr, 0.25 to 0.35% C and < 0.25% V. It is (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives (B) ... resistance (C) Having poor toughness (D) Not helpful in producing cleaner steel due to oxidising action of vanadium
Last Answer : (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives
Description : The maximum stress below which a material can withstand an infinite number of cycle of stress, is termed as the (A) Fatigue strength (B) Creep strength (C) Resilience (D) Endurance limit
Last Answer : D) Endurance limit
Description : Tumbling is the process of improving the __________ of the materials/parts. (A) Surface finish (B) Fatigue limit (C) Creep limit (D) Surface cleanliness
Last Answer : Option D
Description : Pick out the wrong statement. (A) The toughness of a material decreases, when it is heated (B) Crane hooks are normally made of wrought iron (C) Cold working of a metal decreases its ... (D) The temperature at which new grains are formed in a metal is known as the recrystallisation temperature
Last Answer : (C) Cold working of a metal decreases its fatigue strength
Description : A bearing metal should not have (A) Enough plasticity (B) Low thermal conductivity (C) Low co-efficient of friction (D) High toughness
Last Answer : (B) Low thermal conductivity
Description : Pick out the wrong statement. (A) The equivalent stiffness of two springs (of equal stiffness 'S') in series is S/2 while in parallel is 2S (B) For a helical spring, deflection is ... is less than the buckling load (D) Modulus of resilience is proportional to (stress at elastic limit)2
Last Answer : (C) Crushing load or columns is less than the buckling load
Description : Exposure to __________ accelerates the degradation of plastics. (A) Ultraviolet radiation (B) High atmospheric temperature (C) High ambient temperature (D) Damp atmosphere
Last Answer : A) Ultraviolet radiation
Description : Delayed allergy reaction (type IV allergic reaction) is: a) An An allergic or immune response that begins within a period lasting from a few minutes to about an hour after exposure to ... of antigen-antibody complexes that cause tissue damage e) An allergic disorder which is transferred genetically.
Last Answer : Ans: B
Description : Immediate allergy reaction (type I allergic reaction) is: a) An allergic or immune response that begins within a period lasting from a few minutes to about an hour after exposure to an ... cause tissue damage e) It occurs during blood transfusion reactions and in hemolytic disease of the newborn.
Last Answer : Ans: A
Description : Which of the following statement(s) is (are) true for the given situation? Exposure of silver chloride to sunlight for a long duration turns grey due to (i) formation of silver by decomposition of silver chloride (ii) sublimation of ... (b) (ii), (i) and (iii) (c) (ii) and (iii) (d) (iv) only
Last Answer : (a) (i) only
Description : Write the different types of oxide films formed on the metal surface. Explain the oxide film which is more protective against corrosion.
Last Answer : Types of oxide films 1. Stable porous oxide film 2. Stable non porous oxide film 3. Unstable oxide film 4. Volatile oxide film i) Stable nonporous oxide film ii) Unstable oxide films are protective ... . Example: - Such type of oxide film is formed in the metals like Ag, Au, and Pt.
Description : Name the metal oxide film which is more protective. Explain.
Last Answer : Stable -non - porous oxide film. Explanation: Metals like Al forms Al2O3 whose volume is greater than the volume of metal (Al). An extremely tightly adhering, non- porous oxide layers is ... it forms a barrier for further action and hence the rate of oxidation of metal rapidly decreases.
Description : Wohler test is a destructive test to find out the __________ strength of a prepared metal specimen. (A) Creep (B) Fatigue (C) Endurance (D) Tensile
Last Answer : (B) Fatigue
Description : . Plasticisers are added to paints to (A) Make it corrosion resistant (B) Make glossy surface (C) Give elasticity & prevent cracking of the film (D) Increase atmospheric oxidation
Last Answer : (C) Give elasticity & prevent cracking of the film
Description : Which of the following materials does not form adherent oxide film on surface? (A) Copper (B) Nickel (C) Aluminium (D) Gold & silver
Last Answer : (D) Gold & silver
Description : For the formation of metal oxide, `deltaG^(@)` __________ with increase in temperature.
Last Answer : For the formation of metal oxide, `deltaG^(@)` __________ with increase in temperature. A. Only I B. I,II only C. I,II,III only D. All
Description : The property of soil which allows it to be deformed rapidly, without rupture, without elastic rebound and without volume change is known as a) Porosity b) Plasticity* c) Stiffness d) Plastic limit
Last Answer : b) Plasticity*
Description : Which of the following is the most important rubber compounding ingredient which is used to improve wearing qualities of both natural rubber & SBR by imparting toughness? (A) Phosphorous (B) Carbon black (C) Pine oil (D) Rosin
Last Answer : (B) Carbon black
Description : Cold work tool steel should have (A) High toughness (B) Poor hardenability (C) High wear resistance (D) All (A), (B) & (C)
Last Answer : (C) High wear resistance
Description : High speed steel should have high (A) Toughness (B) Wear resistance (C) Hardenability (D) Both (B) & (C)
Last Answer : (D) Both (B) & (C)
Description : Which of the following processes follows the hardening process for reducing the hardening strains & increasing the toughness of the steel part? (A) Anodising (B) Tempering (C) Carburising
Last Answer : (B) Tempering
Description : For a loudness level between 110 and 120 dB, the maximum daily exposure limit is ____ minute (s). A. 1 B. 60 C. 20 D. 45
Last Answer : A. 1
Description : Stereospecific agents are exemplified by (A) Radiation (B) Supported metal oxide catalysts (C) Ziegler catalysts (D) All (A), (B) & (C)
Description : Electrometallurgical methods of metal extraction is normally used for those metals (A) Whose oxide/ore is not reduced by carbon (B) Which fall in the category of alkali & alkaline earth metals (C) Which stands higher in the electrochemical series of the metal (D) All (A), (B) & (C)
Description : As far as localised alveolar osteitis is concerned; which one of the following is true? A. The incidence in the mandible and maxilla is similar B. The prophylactic prescription of antibiotics ... and irrigation is mandatory E. Zn oxide eugenol and alvogyl dressing promote a rapid bone growth
Last Answer : C. Excessive fibrinolysis is the likely aetiology
Description : As far as localised alveolar osteitis (dry socket) is concerned; which one of the following is true? M07 A. The incidence in the mandible and maxilla is similar B. The prophylactic ... diagnosis and irrigation is mandatory E. Zinc oxide eugenol and alvogyl dressing promote a rapid bone growth
Description : Density of film is decreased by increasing the : A. MA B. Exposure time C. Developing time D. Rinsing time
Last Answer : B. Exposure time
Description : The inverse Square Law is concerned with intensity of radiation using type D film of 200mm target to film distance, the exposure time was 0.25s. What would be the exposure for the same situation with 400mm target to film distance? M07********** A. 0.5s B. 1.0s C. 2.0s D. 0.25s E. 0.125s
Last Answer : B. 1.0s
Description : Exposure of the patient to ionising radiation when taking a radiograph is NOT REDUCED by: A. The use of fast film B. The addition of filtration C. Collimation of the beam D. The use of an open and lead lined cone E. Decreasing the kilovoltage KvP
Last Answer : E. Decreasing the kilovoltage KvP
Description : Use of hydrated lime in water treatment (A) Before filtration, reduces the bacterial load on filters (B) After filtration, combats the corrosiveness of water due to the presence of O2 & CO2 (C) Is to adjust the pH value (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Which one of the following impurity is not desirable in the soil used for brick formation a) Alkali b) Kankar c) Iron oxide d) Alkali & Kankar*
Last Answer : d) Alkali & Kankar*
Description : Safe limit' called Threshold Limit Value (TLV) of carbon monoxide in atmospheric air is < 50 ppm. The main source of carbon monoxide pollutant in air is the (A) Industrial chimney exhaust (B) Automobiles exhaust (C) Photochemical reaction in polluted atmosphere (D) Burning of domestic fuel
Last Answer : (B) Automobiles exhaust
Description : The ductility of metal is usually expressed in terms of the: A. Yield strength (point where the material is not longer elastic) B. Percent elongation C. Modulus of elasticity (stiffness of the material)
Last Answer : B. Percent elongation
Description : Exposure of DNA to ultraviolet radiation can lead to the formation of (A) Adenine dimers (B) Guanine dimers (C) Thymine dimers (D) Uracil dimers
Last Answer : Answer : C
Description : Which one of the following statements is correct with respect to kidney function regulation? (a) When someone drinks lot of water, ADH release is suppressed. (b) Exposure to cold temperature ... During summer when body loses lot of water by evaporation, the release of ADH is suppressed.
Last Answer : (a) When someone drinks lot of water, ADH release is suppressed.
Description : Film boiling occurs at __________ pressure. (A) Atmospheric (B) Sub-atmospheric (C) Negative (D) Very high
Last Answer : (D) Very high