Film boiling occurs at __________ pressure. (A) Atmospheric (B) Sub-atmospheric (C) Negative (D) Very high

Film boiling occurs at __________ pressure.

(A) Atmospheric

(B) Sub-atmospheric

(C) Negative

(D) Very high

by

1 Answer

Answer :

(D) Very high

by

Related questions

Boiling of milk in an open vessel is an example of __________ boiling. (A) Film (B) Sub-cooled (C) Saturated nucleate (D) None of these

Description : Boiling of milk in an open vessel is an example of __________ boiling. (A) Film (B) Sub-cooled (C) Saturated nucleate (D) None of these

Last Answer : (A) Film

Which of the following is an undesirable characteristic of a refrigerant? (A) It should be non-explosive (B) It should have a sub-atmospheric vapor pressure at the temperature in refrigerator coils (C) Its vapor pressure at the condenser temperature should be very high (D) None of these

Description : Which of the following is an undesirable characteristic of a refrigerant? (A) It should be non-explosive (B) It should have a sub-atmospheric vapor pressure at the temperature in refrigerator coils (C) Its vapor pressure at the condenser temperature should be very high (D) None of these

Last Answer : (B) It should have a sub-atmospheric vapor pressure at the temperature in refrigerator coils

Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at 35°C (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C (C) Boiling brine kept in open vessel when the bottom surface temperature of the vessel is maintained constant at 180°C (D) A sub-cooled refrigerant liquid at 8°C flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Description : Which of the following situations can be approximated to a steady state heat transfer system? (A) A red hot steel slab (having outside surface temperature as 1300°C) exposed to the atmospheric air at ... flowing at the rate of 6 Kg/minute through a copper pipe exposed to atmospheric air at 35°C

Last Answer : (B) 10 kg of dry saturated steam at 8 kgf/cm2 flowing through a short length of stainless steel pipe exposed to atmospheric air at 35°C

Occurs when the vapor pressure equals the atmospheric pressure  a. Boiling  b. Melting  c. Freezing  d. Vaporizing

Description : Occurs when the vapor pressure equals the atmospheric pressure  a. Boiling  b. Melting  c. Freezing  d. Vaporizing

Last Answer : Boiling

Heat flux increases with temperature drop beyond the Leiden frost point in the plot of heat flux vs. temperature drop for a boiling liquid, because (A) Convection becomes important (B) Conduction becomes important (C) Radiation becomes important (D) Sub-cooled boiling occurs

Description : Heat flux increases with temperature drop beyond the Leiden frost point in the plot of heat flux vs. temperature drop for a boiling liquid, because (A) Convection becomes important (B) Conduction becomes important (C) Radiation becomes important (D) Sub-cooled boiling occurs

Last Answer : (C) Radiation becomes important

If a solid-gas non-catalytic reaction occurs at very high temperature, the rate controlling step is the __________ diffusion. (A) Film (B) Ash layer (C) Pore (D) None of these

Description : If a solid-gas non-catalytic reaction occurs at very high temperature, the rate controlling step is the __________ diffusion. (A) Film (B) Ash layer (C) Pore (D) None of these

Last Answer : (A) Film

Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if distilled directly at atmospheric pressure (C) Material cannot be distilled by indirect heating even under low pressure, because of the high boiling temperature (D) Material to be distilled is thermally unstable or has the tendency to react with other components associated with it, at the boiling temperature

Description : Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if ... unstable or has the tendency to react with other components associated with it, at the boiling temperature

Last Answer : (A) Azeotropic mixture is to be separated and the final product is miscible with water

Boiling point of water gets lowered at high altitudes (e.g., hills), because (A) Temperature is low (B) Atmospheric pressure is low (C) Atmospheric pressure is high (D) None of these

Description : Boiling point of water gets lowered at high altitudes (e.g., hills), because (A) Temperature is low (B) Atmospheric pressure is low (C) Atmospheric pressure is high (D) None of these

Last Answer : Option B

An ideal liquid refrigerant should (A) Not have a sub-atmospheric vapour pressure at the temperature in the refrigerator coils (B) Not have unduly high vapour pressure at the condenser temperature (C) Both (A) and (B) (D) Have low specific heat

Description : An ideal liquid refrigerant should (A) Not have a sub-atmospheric vapour pressure at the temperature in the refrigerator coils (B) Not have unduly high vapour pressure at the condenser temperature (C) Both (A) and (B) (D) Have low specific heat

Last Answer : (C) Both (A) and (B)

In sub-cooled boiling, (A) Temperature of the heating surface is less than the boiling point of the liquid (B) Temperature of the heating surface is more than the boiling point of the liquid (C) Bubbles from heating surface are absorbed by the mass of the liquid (D) Very large vapour space is necessary

Description : In sub-cooled boiling, (A) Temperature of the heating surface is less than the boiling point of the liquid (B) Temperature of the heating surface is more than the boiling point of the liquid (C) ... from heating surface are absorbed by the mass of the liquid (D) Very large vapour space is necessary

Last Answer : (B) Temperature of the heating surface is more than the boiling point of the liquid

At high altitudes it is difficult to cook eggs or vegetables properly because of (a) High boiling point of water and low atmospheric pressure (b) Low boiling point of water and low atmospheric pressure (c) Low value of acceleration due to gravity (d) High atmospheric pressure and low billing point of water

Description : At high altitudes it is difficult to cook eggs or vegetables properly because of (a) High boiling point of water and low atmospheric pressure (b) Low boiling point of water and low atmospheric ... Low value of acceleration due to gravity (d) High atmospheric pressure and low billing point of water

Last Answer : Ans:(b)

The boiling point of water decreases at higher altitudes is due to – (1) low temperature (2) low atmospheric pressure (3) high temperature (4) high atmospheric pressure

Description : The boiling point of water decreases at higher altitudes is due to – (1) low temperature (2) low atmospheric pressure (3) high temperature (4) high atmospheric pressure

Last Answer : (2) low atmospheric pressure Explanation: At higher altitudes, the air pressure is decreased, which forces water's boiling point to lower. The air pressure decreases with altitude because of the ... of air. The lowered boiling point of water requires an increase in cooking times or temperature.

The boiling point of water decreases at higher altitudes is due to (1) low temperature (2) low atmospheric pressure (3) high temprature (4) high atmospheric pressure

Description : The boiling point of water decreases at higher altitudes is due to (1) low temperature (2) low atmospheric pressure (3) high temprature (4) high atmospheric pressure

Last Answer : low atmospheric pressure

The capacity of double-effect evaporator is less than half of the capacity of two single effects, each of which is operating over same terminal temperature difference, when the (A) Solution has an elevation of boiling point (B) Evaporators operate under vacuum (C) Evaporators operate at atmospheric pressure (D) None of these

Description : The capacity of double-effect evaporator is less than half of the capacity of two single effects, each of which is operating over same terminal temperature difference, when the (A) Solution has ... B) Evaporators operate under vacuum (C) Evaporators operate at atmospheric pressure (D) None of these

Last Answer : (A) Solution has an elevation of boiling point

Differential manometer measures the (A) Atmospheric pressure (B) Sub-atmospheric pressure (C) Pressure difference between two points (D) None of these

Description : Differential manometer measures the (A) Atmospheric pressure (B) Sub-atmospheric pressure (C) Pressure difference between two points (D) None of these

Last Answer : (C) Pressure difference between two points

When vaporisation takes place through a blanketting film of gas, the phenomenon is termed as __________ boiling. (A) Pool (B) Nucleate (C) Transition (D) Film

Description : When vaporisation takes place through a blanketting film of gas, the phenomenon is termed as __________ boiling. (A) Pool (B) Nucleate (C) Transition (D) Film

Last Answer : (D) Film

Even though heat transfer co-efficient in boiling liquids is large, use of fins is advantageous, when the entire surface is exposed to __________ boiling. (A) Film (B) Nucleate (C) Transition (D) All modes of

Description : Even though heat transfer co-efficient in boiling liquids is large, use of fins is advantageous, when the entire surface is exposed to __________ boiling. (A) Film (B) Nucleate (C) Transition (D) All modes of

Last Answer : Option A

Higher boiling fractions like atmospheric residue is distilled under vacuum at low temperature because at high temperature, there is a tendency of the predominance of(A) Thermal cracking(B) Gum formation(C) Coking(D) Discoloration

Description : Higher boiling fractions like atmospheric residue is distilled under vacuum at low temperature because at high temperature, there is a tendency of the predominance of (A) Thermal cracking (B) Gum formation (C) Coking (D) Discoloration

Last Answer : (C) Coking

At boiling point of liquids, its : (1) Temperature increases (2) Atmospheric pressure increases (3) Timperature remains increases (4) Vapour pressure decreases

Description : At boiling point of liquids, its : (1) Temperature increases (2) Atmospheric pressure increases (3) Timperature remains increases (4) Vapour pressure decreases

Last Answer : (3) Timperature remains increases

The boiling point of water depends upon the – (1) atmospheric pressure (2) volume (3) density (4) mass

Description : The boiling point of water depends upon the – (1) atmospheric pressure (2) volume (3) density (4) mass

Last Answer : (1) atmospheric pressure Explanation: The boiling point corresponds of water to the ternperature at which its vapour pressure equals the surrounding environmental pressure. So it is dependent on ... pressure decreases. As this pressure decreases, the boiling point of the water also decreases.

At boiling point of liquids, its – (1) Temperature increases (2) Atmospheric pressure increases (3) Temperature remains constant (4) Vapour pressure decreases

Description : At boiling point of liquids, its – (1) Temperature increases (2) Atmospheric pressure increases (3) Temperature remains constant (4) Vapour pressure decreases

Last Answer : (3) Temperature remains constant Explanation: An interesting property of matter is that its temperature remains constant during a phase change, assuming its surrounding pressure is constant. A liquid changes into gaseous state at a constant temperature called its boiling point.

The boiling point of water depends upon the (1) atmospheric pressure (2) volume (3) density (4) mass

Description : The boiling point of water depends upon the (1) atmospheric pressure (2) volume (3) density (4) mass

Last Answer : atmospheric pressure

At boiling point of liquids, its (1) Temperature increases (2) Atmospheric pressure increases (3) Temperature remains constant (4) Vapour pressure decreases

Description : At boiling point of liquids, its (1) Temperature increases (2) Atmospheric pressure increases (3) Temperature remains constant (4) Vapour pressure decreases 

Last Answer : Temperature remains constant

__________________ is a liquid at the saturations which has temperature equal to the boiling point corresponding to the existing pressure.  a. Saturation Temperature  b. Sub cooled Liquid  c. Compressed Liquid  d. Saturated Liquid

Description : __________________ is a liquid at the saturations which has temperature equal to the boiling point corresponding to the existing pressure.  a. Saturation Temperature  b. Sub cooled Liquid  c. Compressed Liquid  d. Saturated Liquid

Last Answer : Saturated Liquid

The South-East trade winds are attracted towards the Indian sub-continent in the rainy season due to – (1) the development of cyclone over the equator (2) the effect of easterlies (3) the effect of Northern-East trade winds (4) the presence of low atmospheric pressure over North-West India

Description : The South-East trade winds are attracted towards the Indian sub-continent in the rainy season due to – (1) the development of cyclone over the equator (2) the effect of easterlies (3) the effect of Northern-East trade winds (4) the presence of low atmospheric pressure over North-West India

Last Answer : (4) the presence of low atmospheric pressure over North-West India Explanation: During the Rainy Season in India (Mid-June to the end of September), the intense heat that prevails in the ... they are deflected to their right and blow over the Indian subcontinent as the south-west monsoon winds.

When the mixture to be distilled has a very high boiling point and the product material is heat sensitive, the separation technique to be used is __________ distillation. (A) Continuous (B) Steam (C) Azeotropic (D) None of these

Description : When the mixture to be distilled has a very high boiling point and the product material is heat sensitive, the separation technique to be used is __________ distillation. (A) Continuous (B) Steam (C) Azeotropic (D) None of these

Last Answer : (B) Steam

Which one of the following statements about PYROLYSIS, which is a process for solid waste treatment is incorrect? (1) It converts the waste into solid, liquid and gas of which the resultant liquid and gas can be used to produce energy. (2) The process occurs at a temperature above 430°C at atmospheric pressure. (3) The process occurs under high pressure at temperature above 430° C. (4) It is a thermo chemical decomposition of organic waste

Description : Which one of the following statements about PYROLYSIS, which is a process for solid waste treatment is incorrect? (1) It converts the waste into solid, liquid and gas of which the resultant liquid ... pressure at temperature above 430° C. (4) It is a thermo chemical decomposition of organic waste

Last Answer : (2) The process occurs at a temperature above 430°C at atmospheric pressure. Explanation: Pyrolysis is a thermo-chemical decomposition of organic material at elevated temperatures in the ... . Pyrolysis generally takes place well above atmospheric pressure at temperatures exceeding above 430 °C.

Which one of the following statements about PYROLYSIS, which is a process for solid waste treatment is incorrect? (1) It converts the waste into solid, liquid and gas of which the resultant liquid and gas can be used to produce energy. (2) The process occurs at a temperature above 430°C at atmospheric pressure. (3) The process occurs under high pressure at temperature above 430° C. (4) It is a thermochemical decomposition of organic waste

Description : Which one of the following statements about PYROLYSIS, which is a process for solid waste treatment is incorrect? (1) It converts the waste into solid, liquid and gas of which the resultant ... high pressure at temperature above 430° C. (4) It is a thermochemical decomposition of organic waste

Last Answer : The process occurs at a temperature above 430°C at atmospheric pressure.

In centrifugal pumps, cavitation occurs, when pressure of the impeller eye or vane becomes (A) Less than atmospheric pressure (B) More than liquid vapor pressure (C) Less than liquid vapor pressure (D) More than atmospheric pressure

Description : In centrifugal pumps, cavitation occurs, when pressure of the impeller eye or vane becomes (A) Less than atmospheric pressure (B) More than liquid vapor pressure (C) Less than liquid vapor pressure (D) More than atmospheric pressure

Last Answer : (C) Less than liquid vapor pressure

Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation (B) A sharp decrease in pressure drop is an indication of flooding in a distillation coloumn (C) Solvent used in extractive distillation should be of high volatility (D) Flash distillation is suitable for separating components which have very close boiling temperature

Description : Pick out the correct statement. (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of ... Flash distillation is suitable for separating components which have very close boiling temperature

Last Answer : (A) Ponchan-Savarit method is more accurate than McCabe-Thiele method to determine the number of theoretical stages required for the separation of non￾ideal binary system by distillation

Maximum stability of white phosphorous is at (A) Very high pressure (B) Atmospheric pressure (C) Room temperature (D) > 600°C

Description : Maximum stability of white phosphorous is at (A) Very high pressure (B) Atmospheric pressure (C) Room temperature (D) > 600°C

Last Answer : (D) > 600°C

In ammonia synthesis (N2 + 3H2 = 2NH3 ), there is a decrease in total volume, hence to get high equilibrium conversion, the reaction should becarried out at(A) Low pressure(B) High pressure(C) Very high temperature(D) Atmospheric pressure; as the pressure has no effect on conversion

Description : In ammonia synthesis (N2 + 3H2 = 2NH3 ), there is a decrease in total volume, hence to get high equilibrium conversion, the reaction should becarried out at (A) Low pressure (B) High pressure (C) Very high temperature (D) Atmospheric pressure; as the pressure has no effect on conversion

Last Answer : (B) High pressure

Water-ethyl alcohol solution can be concentrated (in respect of alcohol concentration) by __________ distillation. (A) Atmospheric (B) Vacuum (C) High pressure (D) None of these

Description : Water-ethyl alcohol solution can be concentrated (in respect of alcohol concentration) by __________ distillation. (A) Atmospheric (B) Vacuum (C) High pressure (D) None of these

Last Answer : (B) Vacuum

Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger calculations (Δt) weighted is used in place of Δt, when it involves more than one sequence of heating or cooling i.e., desuperheating & condensation or condensation & sub-cooling (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted (D) In case of short tube vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Description : Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger ... vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Last Answer : (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted

Flooding in a vapor-liquid contacting equipment occurs in a tray, when the pressure drop through a tray is __________ the liquid head available in the downcomer. (A) Less than (B) More than (C) Same as (D) Very much less

Description : Flooding in a vapor-liquid contacting equipment occurs in a tray, when the pressure drop through a tray is __________ the liquid head available in the downcomer. (A) Less than (B) More than (C) Same as (D) Very much less

Last Answer : (B) More than

Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for counter flow and parallel flow can be theoretically same when any one of the fluids (hot or cold fluid) passes through the heat exchanger at constant temperature (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs (D) Phase change in case of a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Description : Pick out the wrong statement. (A) The controlling resistance in case of heating of air by condensing steam is in the air film (B) The log mean temperature difference (LMTD) for ... a pure fluid at a given pressure from liquid to vapor or vice-versa occurs at saturation temperature

Last Answer : (C) In case of a 1 - 2 shell and tube heat exchanger, the LMTD correction factor value increases sharply, when a temperature cross occurs

Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat exchanger, when the (A) Higher condensing film co-efficient is desired (B) Condensate is corrosive in nature (C) Lower pressure drop through the exchanger is desired (D) Temperature of the incoming vapor is very high Answer: Option B

Description : Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat ... drop through the exchanger is desired (D) Temperature of the incoming vapor is very high

Last Answer : (B) Supersaturated

It is not preferable to use superheated steam in evaporators, because of its very (A) High temperature (B) High pressure (C) Low film co-efficient (D) None of these

Description : It is not preferable to use superheated steam in evaporators, because of its very (A) High temperature (B) High pressure (C) Low film co-efficient (D) None of these

Last Answer : (C) Low film co-efficient

Lungs do not collapse between breaths and some air always remains in the lungs which can never be expelled because (a) there is a negative pressure in the lungs (b) there is a negative intrapleural pressure pulling at the lung walls (c) there is a positive intrapleural pressure (d) pressure in the lungs is higher than the atmospheric pressure.

Description : Lungs do not collapse between breaths and some air always remains in the lungs which can never be expelled because (a) there is a negative pressure in the lungs (b) there is a negative ... there is a positive intrapleural pressure (d) pressure in the lungs is higher than the atmospheric pressure.

Last Answer : (b) there is a negative intrapleural pressure pulling at the lung walls

In a depressed nappe (A) The pressure below the nappe is atmospheric (B) The pressure below the nappe is negative (C) The pressure above the nappe is atmospheric (D) The pressure above the nappe is negative

Description : In a depressed nappe (A) The pressure below the nappe is atmospheric (B) The pressure below the nappe is negative (C) The pressure above the nappe is atmospheric (D) The pressure above the nappe is negative

Last Answer : Answer: Option B

The pressure less than atmospheric pressure is known as (A) Suction pressure (B) Vacuum pressure (C) Negative gauge pressure (D) All of these

Description : The pressure less than atmospheric pressure is known as (A) Suction pressure (B) Vacuum pressure (C) Negative gauge pressure (D) All of these

Last Answer : Answer: Option D

In a free nappe, (A) The pressure below the nappe is atmospheric (B) The pressure below the nappe is negative (C) The pressure above the nappe is atmospheric (D) The pressure above the nappe is negative

Description : In a free nappe, (A) The pressure below the nappe is atmospheric (B) The pressure below the nappe is negative (C) The pressure above the nappe is atmospheric (D) The pressure above the nappe is negative

Last Answer : Answer: Option A

Select the correct statement. (a) Expiration occurs due to external intercostal muscles. (b) Intrapulmonary pressure is lower than the atmospheric pressure during inspiration. (c) Inspiration occurs when atmospheric pressure is less than intrapulmonary pressure. (d) Expiration is initiated due to contraction of diaphragm.

Description : Select the correct statement. (a) Expiration occurs due to external intercostal muscles. (b) Intrapulmonary pressure is lower than the atmospheric pressure during inspiration. (c) Inspiration ... less than intrapulmonary pressure. (d) Expiration is initiated due to contraction of diaphragm.

Last Answer : (b) Intrapulmonary pressure is lower than the atmospheric pressure during inspiration.

What occurs when the vapor pressure of a liquid equals atmospheric pressure?

Description : What occurs when the vapor pressure of a liquid equals atmospheric pressure?

Last Answer : ANSWER: IT BEGINS TO BOIL

The temperature of boiling water in a steam engine may be high because - (1) there are dissolved substances in water (2) there is low pressure inside the boiler (3) there is high pressure inside the boiler (4) the lire is at very high temperature

Description : The temperature of boiling water in a steam engine may be high because - (1) there are dissolved substances in water (2) there is low pressure inside the boiler (3) there is high pressure inside the boiler (4) the lire is at very high temperature

Last Answer : (3) there is high pressure inside the boiler Explanation: In the boiler of a steam engine, there is a firebox where coal is shoveled into. The coal is kept burning at a very high temperature, and ... reservoir; the steam is then controlled by a slide valve to move into a cylinder to push the piston.

The temperature of boiling water in a steam engine may be high because : (1) there are dissolved substances in water (2) there is low pressure inside the boiler (3) there is high pressure inside the boiler (4) the fire is at very high temperature

Description : The temperature of boiling water in a steam engine may be high because : (1) there are dissolved substances in water (2) there is low pressure inside the boiler (3) there is high pressure inside the boiler (4) the fire is at very high temperature

Last Answer :  there is high pressure inside the boiler

Film boiling is usually not desired in commercial equipments, because (A) The heat transfer rate is low in view of the large temperature drop (B) It is difficult to maintain (C) It is not economic (D) None of these

Description : Film boiling is usually not desired in commercial equipments, because (A) The heat transfer rate is low in view of the large temperature drop (B) It is difficult to maintain (C) It is not economic (D) None of these

Last Answer : (A) The heat transfer rate is low in view of the large temperature drop

When vaporisation takes place directly at the heating surface, it is called (A) Film boiling (B) Nucleate boiling (C) Vapour binding (D) None of these

Description : When vaporisation takes place directly at the heating surface, it is called (A) Film boiling (B) Nucleate boiling (C) Vapour binding (D) None of these

Last Answer : (B) Nucleate boiling

Pick out the wrong statement about nucleate boiling. (A) Bubble generation is by expansion of entrapped gas/vapour at small cavities in the surface (B) Surface temperature is greater than the saturation temperature of the liquid (C) Heat transfer from the surface of the liquid is less than that in film boiling (D) The temperature is less than that of film boiling

Description : Pick out the wrong statement about nucleate boiling. (A) Bubble generation is by expansion of entrapped gas/vapour at small cavities in the surface (B) Surface temperature is greater than the saturation ... less than that in film boiling (D) The temperature is less than that of film boiling

Last Answer : (D) The temperature is less than that of film boiling

The formation of oxide film on a metal due to atmospheric exposure reduces its (A) Toughness (B) Stiffness (C) Creep limit (D) All (A), (B) & (C)

Description : The formation of oxide film on a metal due to atmospheric exposure reduces its (A) Toughness (B) Stiffness (C) Creep limit (D) All (A), (B) & (C)

Last Answer : (C) Creep limit