Reciprocal of sphericity is termed as the (A) Specific surface ratio (B) Shape factor (C) Sauter diameter (D) Surface area per unit mass

Reciprocal of sphericity is termed as the
(A) Specific surface ratio
(B) Shape factor
(C) Sauter diameter
(D) Surface area per unit mass
by

1 Answer

Answer :

(B) Shape factor
by

Related questions

Sauter mean diameter is the same as the __________ mean diameter. (A) Mass (B) Arithmetic (C) Volume-surface (D) Geometric

Description : Sauter mean diameter is the same as the __________ mean diameter. (A) Mass (B) Arithmetic (C) Volume-surface (D) Geometric

Last Answer : (C) Volume-surface

If dp is the equivalent diameter of a non-spherical particle, Vp its volume and sp its surface area, then its sphericity is φs is defined by (A) φs = 6 Vp /dpsp (B) φs = Vp /dpsp (C) φs = 6 dpSp /Vp (D) φs = dpSp /Vp

Description : If dp is the equivalent diameter of a non-spherical particle, Vp its volume and sp its surface area, then its sphericity is φs is defined by (A) φs = 6 Vp /dpsp (B) φs = Vp /dpsp (C) φs = 6 dpSp /Vp (D) φs = dpSp /Vp

Last Answer : (A) φs = 6 Vp /dpsp

Sphericity for a non-spherical particle is given by (where, V and S are volume and surface area respectively of one particle. and, D = equivalent diameter of particle). (A) 6.V/D.S(B) V/6D.S (C) D.S/V (D) V/D.S

Description : Sphericity for a non-spherical particle is given by (where, V and S are volume and surface area respectively of one particle. and, D = equivalent diameter of particle). (A) 6.V/D.S (B) V/6D.S (C) D.S/V (D) V/D.S

Last Answer : (B) V/6D.S (C) D.S/V (D) V/D.S

For a non-spherical particle, the sphericity (A) Is defined as the ratio of surface area of a sphere having the same volume as the particle to the actual surface area of the particle (B) Has the dimension of length (C) Is always less than 1 (D) Is the ratio of volume of a sphere having the same surface area as the particle to the actual volume of the particle

Description : For a non-spherical particle, the sphericity (A) Is defined as the ratio of surface area of a sphere having the same volume as the particle to the actual surface area of the particle (B) Has ... of volume of a sphere having the same surface area as the particle to the actual volume of the particle

Last Answer : (A) Is defined as the ratio of surface area of a sphere having the same volume as the particle to the actual surface area of the particle

Sphericity is the ratio of the surface area of a spherical particle having the same volume as the particle to the surface area of the particle. Which of the following has the maximum value of sphericity? (A) Sphere(B) Cube(C) Cylinder (L/D = 1)(D) Raschig rings

Description : Sphericity is the ratio of the surface area of a spherical particle having the same volume as the particle to the surface area of the particle. Which of the following has the maximum value of sphericity? (A) Sphere (B) Cube (C) Cylinder (L/D = 1) (D) Raschig rings

Last Answer : (A) Sphere

The reciprocal of stripping factor is termed as (A) Selectivity index (B) Relative volatility (C) Absorption factor (D) Murphree efficiency

Description : The reciprocal of stripping factor is termed as (A) Selectivity index (B) Relative volatility (C) Absorption factor (D) Murphree efficiency

Last Answer : (C) Absorption factor

The sphericity of a solid particle of cubical shape is (A) π (B) (π/6) 1/3 (C) (π/6) 1/2 (D) π/3

Description : The sphericity of a solid particle of cubical shape is (A) π (B) (π/6) 1/3 (C) (π/6) 1/2 (D) π/3

Last Answer : (B) (π/6) 1/3 (C) (π/6) 1/2

The sphericity of a cylinder of 1 mm diameter and length 3 mm is (A) 0.9 (B) 0.78 (C) 0.6 (D) 0.5

Description : The sphericity of a cylinder of 1 mm diameter and length 3 mm is (A) 0.9 (B) 0.78 (C) 0.6 (D) 0.5

Last Answer : (A) 0.9

Sphericity of a cubical particle, when its equivalent diameter is taken as the height of the cube, is (A) 0.5 (B) 1 (C) √2 (D) √3

Description : Sphericity of a cubical particle, when its equivalent diameter is taken as the height of the cube, is (A) 0.5 (B) 1 (C) √2 (D) √3

Last Answer : (B) 1

Sphericity of raschig ring (whose length and diameter are equal) is (A) > 1 (B) < 1 (C) 1 (D) 2

Description : Sphericity of raschig ring (whose length and diameter are equal) is (A) > 1 (B) < 1 (C) 1 (D) 2

Last Answer : (C) 1

For spheres, the surface shape factor is given by (where, A = area, V = volume, and D = diameter) (A) π = (A/D2 ) (B) π/6 = (V/D3 ) (C) AD/V (D) None of these

Description : For spheres, the surface shape factor is given by (where, A = area, V = volume, and D = diameter) (A) π = (A/D2 ) (B) π/6 = (V/D3 ) (C) AD/V (D) None of these

Last Answer : (A) π = (A/D2 )

Pick out the wrong statement pertaining to the roll crushers. (A) Maximum feed size determines the required roll diameter (B) For hard material's crushing, the reduction ratio should not exceed 4 (C) Both the rolls run necessarily at the same speed (D) Reduction ratio and differential roll speed affect production rate & energy consumed per unit of surface produced

Description : Pick out the wrong statement pertaining to the roll crushers. (A) Maximum feed size determines the required roll diameter (B) For hard material's crushing, the reduction ratio should not ... ratio and differential roll speed affect production rate & energy consumed per unit of surface produced

Last Answer : (C) Both the rolls run necessarily at the same speed

For spheres, the specific surface shape factor is given by (A) AD/V (B) D/V (C) A/V (D) √(AD/V)

Description : For spheres, the specific surface shape factor is given by (A) AD/V (B) D/V (C) A/V (D) √(AD/V)

Last Answer : (A) AD/V

Centre of pressure of a plane surface of arbitrary shape immersed vertically in a static mass of fluid(A) Lies above the centroid of the plane surface(B) Is independent of the specific weight of the fluid(C) Is different for different fluids(D) Is at the centroid of the plane surface

Description : Centre of pressure of a plane surface of arbitrary shape immersed vertically in a static mass of fluid (A) Lies above the centroid of the plane surface (B) Is independent of the specific weight of the fluid (C) Is different for different fluids (D) Is at the centroid of the plane surface

Last Answer : (B) Is independent of the specific weight of the fluid

Pick out the wrong statement. (A) Reciprocal of the resistance to heat flow is called thermal conductance (B) Unit of thermal conductance is W/°K (C) Thermal conductance of a wall of thickness 'L', thermal conductivity 'k' and heat flow area 'A' is kL/A (D) None of these

Description : Pick out the wrong statement. (A) Reciprocal of the resistance to heat flow is called thermal conductance (B) Unit of thermal conductance is W/°K (C) Thermal conductance of a wall of thickness 'L', thermal conductivity 'k' and heat flow area 'A' is kL/A (D) None of these

Last Answer : (C) Thermal conductance of a wall of thickness 'L', thermal conductivity 'k' and heat flow area 'A' is kL/A

The spring index is, (A) Ratio of wire diameter to mean coil diameter (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection

Description : The spring index is, (A) Ratio of wire diameter to mean coil diameter (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection

Last Answer : (C) Ratio of mean coil diameter to wire diameter

The stiffness of spring is, (A) Deflection per unit of axial force (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection

Description : The stiffness of spring is, (A) Deflection per unit of axial force (B) Force per unit cross-sectional area of spring (C) Ratio of mean coil diameter to wire diameter (D) Force required to produce unit deflection

Last Answer : (D) Force required to produce unit deflection

Transmissibility in a support excitation system is defined by A) Ratio of absolute amplitude of the mass to the excitation amplitude of the support B) Reciprocal of (a) C) Ratio of the force transmitted to the foundation, to the equivalent force corresponding to maximum displacement excitation D) None of the above

Description : Transmissibility in a support excitation system is defined by A) Ratio of absolute amplitude of the mass to the excitation amplitude of the support B) Reciprocal of (a) C) Ratio of the ... the foundation, to the equivalent force corresponding to maximum displacement excitation D) None of the above

Last Answer : B) Reciprocal of (a)

Size measurement of ultrafine particles can be best expressed in terms of (A) Centimetre (B) Screen size (C) Micron (D) Surface area per unit mass

Description : Size measurement of ultrafine particles can be best expressed in terms of (A) Centimetre (B) Screen size (C) Micron (D) Surface area per unit mass

Last Answer : (D) Surface area per unit mass

During exponential growth, the growth rate isA-.number of generations per unit time B- reciprocal of generation time C- both (a) and D- none of these

Description : During exponential growth, the growth rate isA-.number of generations per unit time B- reciprocal of generation time C- both (a) and D- none of these

Last Answer : reciprocal of generation tim

For raschig rings, the sphericity is (A) 0.5 (B) 1 (C) < 1

Description : For raschig rings, the sphericity is (A) 0.5 (B) 1 (C) < 1

Last Answer : (C) < 1

Sphericity of pulverised coal is (A) 1 (B) < 1 (C) > 1 (D) ∞

Description : Sphericity of pulverised coal is (A) 1 (B) < 1 (C) > 1 (D) ∞

Last Answer : (B) < 1

Shape factor for a cylinder whose length equals its diameter is (A) 1.5 (B) 0.5 (C) 1.0 (D) 2.0

Description : Shape factor for a cylinder whose length equals its diameter is (A) 1.5 (B) 0.5 (C) 1.0 (D) 2.0

Last Answer : (A) 1.5

Premature ventricular contractions are considered precursors of ventricular tachycardia when they a) occur at a rate of more than six per minute. When PVCs occur at a rate of more than six per minute they indicate increasing ventricular irritability and are considered forerunners of ventricular tachycardia (VT). b) occur during the QRS complex. PVCs are dangerous when they occur on the T wave. c) have the same shape. PVCs are dangerous when they are multifocal (have different shapes). d) are paired with a normal beat. A PVC that is paired with a normal beat is termed bigeminy.

Description : Premature ventricular contractions are considered precursors of ventricular tachycardia when they a) occur at a rate of more than six per minute. When PVCs occur at a rate of more than six per minute they ... paired with a normal beat. A PVC that is paired with a normal beat is termed bigeminy.

Last Answer : a) occur at a rate of more than six per minute. When PVCs occur at a rate of more than six per minute they indicate increasing ventricular irritability and are considered forerunners of ventricular tachycardia (VT).

Specific volume of an ideal gas is (A) Equal to its density (B) The reciprocal of its density (C) Proportional to pressure (D) None of these

Description : Specific volume of an ideal gas is (A) Equal to its density (B) The reciprocal of its density (C) Proportional to pressure (D) None of these

Last Answer : (B) The reciprocal of its density

An engine working on air standard Otto cycle has a cylinder diameter of 10 cm and stroke length of 15 cm. The ratio of specific heats for air is 1.4. If the clearance volume is 196.3 cc and the heat supplied per kg of air per cycle is 1800 kJ/kg, then work output per cycle per kg of air is a. 879.1 kJ/ b. 890.2 kJ c. 895.3 kJ d. 973.5 kJ

Description : An engine working on air standard Otto cycle has a cylinder diameter of 10 cm and stroke length of 15 cm. The ratio of specific heats for air is 1.4. If the clearance volume is 196.3 cc and the heat supplied per kg of air per ... kg of air is a. 879.1 kJ/ b. 890.2 kJ c. 895.3 kJ d. 973.5 kJ

Last Answer : ANSWER d. 973.5 kJ

Each term of the Bernoulli's equation written in the form, (p/ρ) + (g/gc ). Z + (v 2 /2gc ) = constant, represents the total energy per unit (A) Mass (B) Volume (C) Specific weight (D) None of these

Description : Each term of the Bernoulli's equation written in the form, (p/ρ) + (g/gc ). Z + (v 2 /2gc ) = constant, represents the total energy per unit (A) Mass (B) Volume (C) Specific weight (D) None of these

Last Answer : (A) Mass

The interfacial area per unit volume of dispersion, in a gas-liquid contactor, for fractional hold up of gas = 0.1 and gas bubble diameter = 0.5 mm is given by (in m2 /m3 ) (A) 500 (B) 1200 (C) 900 (D) 800

Description : The interfacial area per unit volume of dispersion, in a gas-liquid contactor, for fractional hold up of gas = 0.1 and gas bubble diameter = 0.5 mm is given by (in m2 /m3 ) (A) 500 (B) 1200 (C) 900 (D) 800

Last Answer : (A) 500

For specified tube outside diameter, higher BWG means higher (A) Tube thickness (B) Cross-sectional area (C) Weight per unit length (D) None of these

Description : For specified tube outside diameter, higher BWG means higher (A) Tube thickness (B) Cross-sectional area (C) Weight per unit length (D) None of these

Last Answer : (B) Cross-sectional area

The pressure drop per unit length for laminar flow of fluid through a long pipe is proportional to (where, A = cross-sectional area of the pipe & D = Diameter of the pipe) (A) A (B) D (C) 1/A (D) 1/A2

Description : The pressure drop per unit length for laminar flow of fluid through a long pipe is proportional to (where, A = cross-sectional area of the pipe & D = Diameter of the pipe) (A) A (B) D (C) 1/A (D) 1/A2

Last Answer : (C) 1/A

Electric flux density in electric field is referred to as a) Number of flux lines b) Ratio of flux lines crossing a surface and the surface area c) Direction of flux at a point d) Flux lines per unit area

Description : Electric flux density in electric field is referred to as a) Number of flux lines b) Ratio of flux lines crossing a surface and the surface area c) Direction of flux at a point d) Flux lines per unit area

Last Answer : b) Ratio of flux lines crossing a surface and the surface area

Pick out the wrong statement. (A) Higher specific gravity of petroleum products means higher C/H ratio (B) Aromatics have lower specific gravity than corresponding paraffins (C) Hydrocarbons of low specific gravity (e.g., paraffins) possess the maximum thermal energy per unit volume (D) Hydrocarbons of high specific gravity (e.g., aromatics) possess the maximum thermal energy per unit weight

Description : Pick out the wrong statement. (A) Higher specific gravity of petroleum products means higher C/H ratio (B) Aromatics have lower specific gravity than corresponding paraffins (C) Hydrocarbons of low ... of high specific gravity (e.g., aromatics) possess the maximum thermal energy per unit weight

Last Answer : (B) Aromatics have lower specific gravity than corresponding paraffins

Prandtl number is the reciprocal of (A) Thermal diffusivity/Momentum diffusivity (B) Thermal diffusivity × Momentum (C) Thermal diffusivity × Mass diffusivity (D) Mass diffusivity × Momentum diffusivity

Description : Prandtl number is the reciprocal of (A) Thermal diffusivity/Momentum diffusivity (B) Thermal diffusivity × Momentum (C) Thermal diffusivity × Mass diffusivity (D) Mass diffusivity × Momentum diffusivity

Last Answer : (A) Thermal diffusivity/Momentum diffusivity

If the strain energy stored per unit volume in a hollow shaft subjected to a pure torque when t attains maximum shear stress fs the ratio of inner diameter to outer diameter, is 17/64 (fs/N) (A) 1/2 (B) 1/3 (C) 1/4 (D) 1/5

Description : If the strain energy stored per unit volume in a hollow shaft subjected to a pure torque  when t attains maximum shear stress fs  the ratio of inner diameter to outer diameter, is 17/64  (fs/N)  (A) 1/2  (B) 1/3  (C) 1/4  (D) 1/5

Last Answer : (C) 1/4 

Specific surface area is the surface area of a unit __________ of materials. (A) Weight (B) Volume (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : Specific surface area is the surface area of a unit __________ of materials. (A) Weight (B) Volume (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (C) Either (A) or (B)

The mass of water vapour per unit volume of air is known as - (1) relative humidity (2) specific humidity (3) absolute humidity (4) variable humidity

Description : The mass of water vapour per unit volume of air is known as - (1) relative humidity (2) specific humidity (3) absolute humidity (4) variable humidity

Last Answer : (3) absolute humidity Explanation: Absolute humidity is the measure of water vapor (moisture) in the air, regardless of temperature. It is expressed as grams of moisture per cubic meter of air (g/m3).

The weight per unit volume of a liquid at a standard temperature and pressure is called (A) Specific weight (B) Mass density (C) Specific gravity (D) None of these

Description : The weight per unit volume of a liquid at a standard temperature and pressure is called (A) Specific weight (B) Mass density (C) Specific gravity (D) None of these

Last Answer : Answer: Option A

The mass per unit volume of a liquid at a standard temperature and pressure is called (A) Specific weight (B) Mass density (C) Specific gravity (D) None of these

Description : The mass per unit volume of a liquid at a standard temperature and pressure is called (A) Specific weight (B) Mass density (C) Specific gravity (D) None of these

Last Answer : Answer: Option B

The heat per unit mass per degree change in temperature  a. specific heat  b. isometric  c. conservation of energy  d. none of the above

Description : The heat per unit mass per degree change in temperature  a. specific heat  b. isometric  c. conservation of energy  d. none of the above

Last Answer : specific heat

Mass (not weight) per unit volume  a. Specific Weight  b. Specific Volume  c. Density  d. None of the above

Description : Mass (not weight) per unit volume  a. Specific Weight  b. Specific Volume  c. Density  d. None of the above

Last Answer : Density

The heat Q per unit mass per degree change in temperature that must be supplied or removed to change the temperature of a substance.  a. Specific Heat Capacity  b. Latent Heat  c. Heat of Transformation  d. Internal Heat

Description : The heat Q per unit mass per degree change in temperature that must be supplied or removed to change the temperature of a substance.  a. Specific Heat Capacity  b. Latent Heat  c. Heat of Transformation  d. Internal Heat

Last Answer : Specific Heat Capacity

Extensive properties per unit mass are called _____.  A. Specific properties  B. Relative properties  C. Unit properties  D. Phase properties

Description : Extensive properties per unit mass are called _____.  A. Specific properties  B. Relative properties  C. Unit properties  D. Phase properties

Last Answer : Specific properties

Logarithmic decrement is defined as the ____________ of the amplitude reduction factor. (A) reciprocal (B) logarithm (C) natural logarithm (D) all of the above

Description : Logarithmic decrement is defined as the ____________ of the amplitude reduction factor. (A) reciprocal (B) logarithm (C) natural logarithm (D) all of the above

Last Answer : (C) natural logarithm

If W is total load per unit area on a panel, D is the diameter of the column head, L is the span in two directions, then the sum of the maximum positive bending moment and average of the negative bending moment for the design of the span of a square flat slab, should not be less than (A) WL/12 (L - 2D/3)² (B) WL/10 (L + 2D/3)² (C) WL/10 (L - 2D/3)² (D) WL/12 (L - D/3)²

Description : If W is total load per unit area on a panel, D is the diameter of the column head, L is the span in two directions, then the sum of the maximum positive bending moment and average of the negative bending moment for the design of the span ... (L + 2D/3)² (C) WL/10 (L - 2D/3)² (D) WL/12 (L - D/3)²

Last Answer : Answer: Option C

The ratio of frequencies is termed. A. interval B. octave C. harmonics D. factor

Description : The ratio of frequencies is termed. A. interval B. octave C. harmonics D. factor

Last Answer : A. interval

In open channels, the specific energy is the (A) Total energy per unit discharge (B) Total energy measured with respect to the datum passing through the bottom of the channel (C) Total energy measured above the horizontal datum (D) Kinetic energy plotted above the free surface of water

Description : In open channels, the specific energy is the (A) Total energy per unit discharge (B) Total energy measured with respect to the datum passing through the bottom of the channel (C) Total energy measured above the horizontal datum (D) Kinetic energy plotted above the free surface of water

Last Answer : Answer: Option B

The specific surface of spherical particles is given by (where D and ρ are diameter and density of particle). (A) 6/D.ρ(B) 2/D.ρ (C) 4/D.ρ (D) 12/D.ρ

Description : The specific surface of spherical particles is given by (where D and ρ are diameter and density of particle). (A) 6/D.ρ (B) 2/D.ρ (C) 4/D.ρ (D) 12/D.ρ

Last Answer : (A) 6/D.ρ

The specific surface of spherical particles is proportional to (where, Dp = diameter of particle). (A) D2 p (B) Dp (C) 1/Dp (D) 1/D2p

Description : The specific surface of spherical particles is proportional to (where, Dp = diameter of particle). (A) D2 p (B) Dp (C) 1/Dp (D) 1/D2p

Last Answer : (C) 1/Dp

BET apparatus is used to determine the (A) Specific surface of a porous catalyst (B) Pore size distribution (C) Pore diameter (D) Porosity of the catalyst bed

Description : BET apparatus is used to determine the (A) Specific surface of a porous catalyst (B) Pore size distribution (C) Pore diameter (D) Porosity of the catalyst bed

Last Answer : (A) Specific surface of a porous catalyst