An engine working on air standard Otto cycle has a cylinder diameter of 10 cm and stroke length of 15 cm. The ratio of specific heats for air is 1.4. If the clearance volume is 196.3 cc and the heat supplied per kg of air per cycle is 1800 kJ/kg, then work output per cycle per kg of air is a. 879.1 kJ/ b. 890.2 kJ c. 895.3 kJ d. 973.5 kJ

An engine working on air standard Otto cycle has a cylinder diameter of 10 cm and stroke length of 15 cm. The ratio of specific heats for air is 1.4. If the clearance volume is 196.3 cc and the heat supplied per kg of air per cycle is 1800 kJ/kg, then work output per cycle per kg of air is  a. 879.1 kJ/  b. 890.2 kJ  c. 895.3 kJ  d. 973.5 kJ  
by

1 Answer

Answer :

ANSWER  d. 973.5 kJ
by
selected by

Related questions

For an engine operating on air standard Otto cycle, the clearance volume is 10% of the swept volume. The specific heat ratio of air is 1.4. The air standard cycle efficiency is a. 38.3 % b. 39.8 % c. 60.2 % d. 61.7 %

Description : For an engine operating on air standard Otto cycle, the clearance volume is 10% of the swept volume. The specific heat ratio of air is 1.4. The air standard cycle efficiency is a. 38.3 % b. 39.8 % c. 60.2 % d. 61.7 %

Last Answer : ANSWER d. 61.7%

The efficiency of the Otto cycle is independent of a. Heat supplied b. Compression ratio c. Ratio of specific heats d. None of the above

Description : The efficiency of the Otto cycle is independent of a. Heat supplied b. Compression ratio c. Ratio of specific heats d. None of the above

Last Answer : Answer a. Heat supplied

An ideal air standard Otto cycle has a compression ratio of 8.5. If the ratio of the specific heats is 1.4, then what is thermal efficiency (in percentage) of the Otto cycle? a. 57.5% b. 45.7% c. 52.5% d. 95%

Description : An ideal air standard Otto cycle has a compression ratio of 8.5. If the ratio of the specific heats is 1.4, then what is thermal efficiency (in percentage) of the Otto cycle? a. 57.5% b. 45.7% c. 52.5% d. 95%

Last Answer : ANSWER a. 57.5%

A diesel engine is usually more efficient than a spark ignition engine because a. Diesel being a heavier hydrocarbon, release more heat per kg than gasoline b. The air standard efficiency of diesel cycle is higher than the Otto cycle, at a fixed compression ratio c. The compression ratio of a diesel engine is higher than that of an Spark ignition engine d.Self ignition temperature of diesel is higher than that of gasoline.

Description : A diesel engine is usually more efficient than a spark ignition engine because a. Diesel being a heavier hydrocarbon, release more heat per kg than gasoline b. The air standard efficiency of diesel ... an Spark ignition engine d.Self ignition temperature of diesel is higher than that of gasoline.

Last Answer : ANSWER c. The compression ratio of a diesel engine is higher than that of an S.I engine

What is the formula for compression (rk) ratio of the Otto cycle? a. rk = Volume of cylinder at the beginning of compression / Volume of cylinder at the end of compression b. rk = Volume of cylinder at the end of compression / Volume of cylinder at the beginning of compression c. rk = Volume of cylinder at the end of compression / clearance volume d. none of the above

Description : What is the formula for compression (rk) ratio of the Otto cycle? a. rk = Volume of cylinder at the beginning of compression / Volume of cylinder at the end of compression b. rk = Volume of cylinder ... c. rk = Volume of cylinder at the end of compression / clearance volume d. none of the above

Last Answer : ANSWER a. rk = Volume of cylinder at the beginning of compression / Volume of cylinder at the end of compression

A gas engine has a volume of 300 cc and clearance volume of 25 cc. Its volumetric efficiency is 0.8 and mech efficiency is 0.9. What is the volume of the mixture taken in per stroke? (a) 248 cc (b) 252 cc (c) 264 cc (d) 286 cc

Description : A gas engine has a volume of 300 cc and clearance volume of 25 cc. Its volumetric efficiency is 0.8 and mech efficiency is 0.9. What is the volume of the mixture taken in per stroke? (a) 248 cc (b) 252 cc (c) 264 cc (d) 286 cc

Last Answer : Ans : c

In a boiler enthalpy of water supplied was 2000 kJ/kg. Enthalpy being added by fuel combustion is 3200 kJ/kg. Using first law of thermodynamics, find amount of heat supplied if steam generation rate is 10 tons per hour.

Description : In a boiler enthalpy of water supplied was 2000 kJ/kg. Enthalpy being added by fuel combustion is 3200 kJ/kg. Using first law of thermodynamics, find amount of heat supplied if steam generation rate is 10 tons per hour.

Last Answer : Heat supplied Q = m (h2-h1) …….(Steady flow energy equation for boiler) ; h2=3200 KJ/kg h1=2000 KJ/kg m = 10 Tons /hour = (10 x 1000)/3600 kg/sec = 2.77 Kg/sec Q = 2.77(3200-2000) = 3324 KJ/sec heat supplied for 10 Tons/hr steam generation

An engine produces 10 kW brake power while working with a brake thermal efficiency of 30%. If the calorific value of the fuel used is 40000 kJ/kg, then what is the fuel consumption? (a) 1.5 kg/hour (b) 3 kg/hour (c) 0.3 kg/hour (d) 1 kg/hour

Description : An engine produces 10 kW brake power while working with a brake thermal efficiency of 30%. If the calorific value of the fuel used is 40000 kJ/kg, then what is the fuel consumption? (a) 1.5 kg/hour (b) 3 kg/hour (c) 0.3 kg/hour (d) 1 kg/hour

Last Answer : Ans :b

In compression ignition (CI) engine, the compression ratio is a. Cylinder volume / Clearance volume b. Swept Volume / Cylinder Volume c. Clearance volume / Cylinder volume d. Cylinder volume / Swept volume (Ans:a)

Description : In compression ignition (CI) engine, the compression ratio is a. Cylinder volume / Clearance volume b. Swept Volume / Cylinder Volume c. Clearance volume / Cylinder volume d. Cylinder volume / Swept volume (Ans:a)

Last Answer : In two stroke engine there is one power stroke in _____ of crankshaft rotation. a. 90° b. 180° c. 270° d. 360° (Ans:d)

If the compression ratio of an engine working on Otto cycle is increased from 5 to 7 the percentage increase in efficiency will be a. 2% b. 4% c. 8% d. 14%

Description : If the compression ratio of an engine working on Otto cycle is increased from 5 to 7 the percentage increase in efficiency will be a. 2% b. 4% c. 8% d. 14%

Last Answer : ANSWER d. 14%

The air standard Otto cycle comprises a two constant pressure processes and two constant volume processes b two constant pressure and two constant entropy processes c. two constant volume processes and two constant entropy processes d. none of the above.

Description : The air standard Otto cycle comprises a two constant pressure processes and two constant volume processes b two constant pressure and two constant entropy processes c. two constant volume processes and two constant entropy processes d. none of the above.

Last Answer : ANSWER (c) two constant volume processes and two constant entropy processes

If the performance of diesel engine of different sizes, cylinder dimensions and power rating are to be compared, which of the following parameters can be used for such comparison? (a) Swept volume (b) Air fuel ratio (c) Specific brake fuel consumption (d) Volumetric efficiency

Description : If the performance of diesel engine of different sizes, cylinder dimensions and power rating are to be compared, which of the following parameters can be used for such comparison? (a) Swept volume (b) Air fuel ratio (c) Specific brake fuel consumption (d) Volumetric efficiency

Last Answer : Ans :c

The actual volume of fresh charge admitted in 4-stroke petrol engine is A. equal to stroke volume B. equal stroke volume and clearance volume C. less than stroke volume D. more than stroke volume

Description : The actual volume of fresh charge admitted in 4-stroke petrol engine is A. equal to stroke volume B. equal stroke volume and clearance volume C. less than stroke volume D. more than stroke volume

Last Answer : ANSWER : C

In a 75 cc engine the parameter cc indicates a. fuel tank capacity b. lubricating oil capacity c. swept volume d. cylinder volume

Description : In a 75 cc engine the parameter cc indicates a. fuel tank capacity b. lubricating oil capacity c. swept volume d. cylinder volume

Last Answer : ANSWER c. swept volume

A two stroke engine has a speed of 750 rpm. A four stroke engine having an identical cylinder size runs at 1500 rpm. The theoretical output of the two stroke engine will (a) Be twice that of the four stroke engine (b) Be half that of the four stroke engine (c) Be the same as that of the four stoke (d) Depend upon whether it is a CI or SI engine

Description : A two stroke engine has a speed of 750 rpm. A four stroke engine having an identical cylinder size runs at 1500 rpm. The theoretical output of the two stroke engine will (a) Be twice that of the four stroke ... ) Be the same as that of the four stoke (d) Depend upon whether it is a CI or SI engine

Last Answer : Ans :c

The ratio of work done per cycle to the stroke volume of the compressor is known as A. Compressor capacity B. Compression ratio C. Compressor efficiency D. Mean effective pressure

Description : The ratio of work done per cycle to the stroke volume of the compressor is known as A. Compressor capacity B. Compression ratio C. Compressor efficiency D. Mean effective pressure

Last Answer : ANSWER : D

In a reciprocating air compressor the compressor work per kg of air A. Increases as clearance volume increases B. Decreases as clearance volume increases C. Is independent of clearance volume D. Increases with clearance volume only of multistage compressor

Description : In a reciprocating air compressor the compressor work per kg of air A. Increases as clearance volume increases B. Decreases as clearance volume increases C. Is independent of clearance volume D. Increases with clearance volume only of multistage compressor

Last Answer : ANSWER : C

For same compression ratio a. Diesel cycle has lower efficiency than Otto cycle b. Diesel cycle has higher efficiency than Otto cycle c. Diesel cycle and Otto cycle have equal efficiencies d. Depends upon the load on engine

Description : For same compression ratio a. Diesel cycle has lower efficiency than Otto cycle b. Diesel cycle has higher efficiency than Otto cycle c. Diesel cycle and Otto cycle have equal efficiencies d. Depends upon the load on engine

Last Answer : Answer a. Diesel cycle has lower efficiency than Otto cycle

In a constant pressure process steam is generated from 10 bar and 0.8 dry condition till it become dry and saturated. Determine amount of heat added per kg of steam. From steam table at 10 bar Tsat = 179.9°C hf = 762.6 kl/kg, hg = 2776.2 kJ/kg

Description : In a constant pressure process steam is generated from 10 bar and 0.8 dry condition till it become dry and saturated. Determine amount of heat added per kg of steam. From steam table at 10 bar Tsat = 179.9°C hf = 762.6 kl/kg, hg = 2776.2 kJ/kg 

Last Answer : Constant pressure process Final condition of steam is dry saturated Enthalpy of dry steam = hg= hf + hfg =2776.2 KJ/Kg .Given Latent heat of vaporization = hfg = hg - hf =2776.2-762.6 =2013.6 KJ/Kg Initial condition ... hfg = 762.6+0.8 X 2013.6 =2373.48 KJ/Kg Heat added = hg-hw = 402.72 KJ/kg

The accumulation of carbon in a cylinder results in increase of A. clearance volume B. volumetric efficiency C. ignition time D. effective compression ratio

Description : The accumulation of carbon in a cylinder results in increase of A. clearance volume B. volumetric efficiency C. ignition time D. effective compression ratio

Last Answer : ANSWER : D

The accumulation of carbon in a cylinder results in increase of a. clearance volume b. volumetric efficiency c. ignition time d. effective compression ratio

Description : The accumulation of carbon in a cylinder results in increase of a. clearance volume b. volumetric efficiency c. ignition time d. effective compression ratio

Last Answer : ANSWER d. effective compression ratio

Scavenging air in diesel engine means a. air used for combustion under pressure b. forced air for cooling the cylinder c. burnt air containing products of combustion d. air used for forcing burnt gases out of the engines cylinder during the exhaust stroke

Description : Scavenging air in diesel engine means a. air used for combustion under pressure b. forced air for cooling the cylinder c. burnt air containing products of combustion d. air used for forcing burnt gases out of the engines cylinder during the exhaust stroke

Last Answer : ANSWER d. air used for forcing burnt gases out of the engines cylinder during the exhaust stroke

In which of the following cycle heat is added at constant volume? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Description : In which of the following cycle heat is added at constant volume? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Last Answer : Answer a. Otto cycle

Air standard Otto cycle is more efficient than the diesel cycle for the same (A) Heat addition & compression ratio (B) Heat addition & pressure (C) Compression ratio & pressure (D) Cylinder dimension & rpm

Description : Air standard Otto cycle is more efficient than the diesel cycle for the same (A) Heat addition & compression ratio (B) Heat addition & pressure (C) Compression ratio & pressure (D) Cylinder dimension & rpm

Last Answer : (A) Heat addition & compression ratio

If the specific heats of a gas and a vapor are 0.2KJ/Kg.°K and 1.5 KJ/Kg.°K respectively, and the humidity is 0.01; the humid heat in KJ/°Kg. is (A) 0.31 (B) 0.107 (C) 0.017 (D) 0.215

Description : If the specific heats of a gas and a vapor are 0.2KJ/Kg.°K and 1.5 KJ/Kg.°K respectively, and the humidity is 0.01; the humid heat in KJ/°Kg. is (A) 0.31 (B) 0.107 (C) 0.017 (D) 0.215

Last Answer : (D) 0.215

For same compression ratio and heat input a. Otto cycle is more efficient b. Diesel cycle is more efficient c. Both are equally efficient d. None of the above

Description : For same compression ratio and heat input a. Otto cycle is more efficient b. Diesel cycle is more efficient c. Both are equally efficient d. None of the above

Last Answer : ANSWER a. Otto cycle is more efficient

Morse test is conducted on the engine to calculate the mechanical efficiency of A. single cylinder CI engine B. single cylinder SI engine C. only on two stroke engines D. multi cylinder engine

Description : Morse test is conducted on the engine to calculate the mechanical efficiency of A. single cylinder CI engine B. single cylinder SI engine C. only on two stroke engines D. multi cylinder engine

Last Answer : ANSWER : D

It is desired to concentrate a 20% salt solution (20 kg of salt in 100 kg of solution) to a 30% salt solution in an evaporator. Consider a feed of 300 kg/min at 30°C. The boiling point of the solution is 110°C, the latent heat of vaporisation is 2100 kJ/kg and the specific heat of the solution is 4 kJ/kg.K. The rate at which the heat has to be supplied in (kJ/min) to the evaporator is (A) 3.06 × 10 5 (B) 6.12 × 10 5 (C) 7.24 × 10 5 (D) 9.08 × 10

Description : It is desired to concentrate a 20% salt solution (20 kg of salt in 100 kg of solution) to a 30% salt solution in an evaporator. Consider a feed of 300 kg/min at 30°C. The boiling point of the solution is 110°C, the latent heat of ... 3.06 10 5 (B) 6.12 10 5 (C) 7.24 10 5 (D) 9.08 10

Last Answer : (A) 3.06 × 10

The specific volume of air is expressed as the volume of: a. 1 kg of air at 101.325 kPa in cm3 b. 0.833 kg of air at standard pressure and temperature in m3 c. 1 kg of air at 101.325 kPa and 21 degrees Celsius in m3 d. 1 g of air occupied at any temperature and pressure e. 1 kg of air, regardless of temperature and pressure

Description : The specific volume of air is expressed as the volume of: a. 1 kg of air at 101.325 kPa in cm3 b. 0.833 kg of air at standard pressure and temperature in m3 c. 1 kg of air at 101.325 ... d. 1 g of air occupied at any temperature and pressure e. 1 kg of air, regardless of temperature and pressure

Last Answer : Answer: C

For perfect gas a. cp – cv = R b. cp + cv = R c. cp / cv = R d. cp X cv = R Where cp & cv are specific heats at constant pressure and volume.

Description : For perfect gas a. cp – cv = R b. cp + cv = R c. cp / cv = R d. cp X cv = R Where cp & cv are specific heats at constant pressure and volume.

Last Answer : ANSWER a. CP – CV = R

Most high speed compression ignition engine operate on A. dual cycle B. otto cycle C. diesel cycle D.Carnot cycle

Description : Most high speed compression ignition engine operate on A. dual cycle B. otto cycle C. diesel cycle D.Carnot cycle

Last Answer : ANSWER : A

Which of the following cycle is used for Compression Ignition engine? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Description : Which of the following cycle is used for Compression Ignition engine? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Last Answer : Answer b. Diesel cycle

Which of the following cycle is used for Spark Ignition engine? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Description : Which of the following cycle is used for Spark Ignition engine? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Last Answer : Answer a. Otto cycle

In diesel engine, the fuel is ignited by a. spark b. injected fuel c. heat resulting from compressing air that is supplied for combustion d. ignitor

Description : In diesel engine, the fuel is ignited by a. spark b. injected fuel c. heat resulting from compressing air that is supplied for combustion d. ignitor

Last Answer : ANSWER c. heat resulting from compressing air that is supplied for combustion

In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air consumption, brake power and incylinder pressure. Tutorials on engine performance parameters. Heat balance sheet. Engine performance curves. 1. The increase in intake air temperature into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Description : In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air ... into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Last Answer : ANSWER : B

For the same peak pressure and heat input a. Otto cycle is more efficient b. Diesel cycle is more efficient c. Both are equally efficient d. None of the above

Description : For the same peak pressure and heat input a. Otto cycle is more efficient b. Diesel cycle is more efficient c. Both are equally efficient d. None of the above

Last Answer : ANSWER b. Diesel cycle is more efficient

In which of the following cycle heat is added at constant pressure? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Description : In which of the following cycle heat is added at constant pressure? a. Otto cycle b. Diesel cycle c. Dual cycle d. Carnot cycle

Last Answer : Answer b. Diesel cycle

What is the relation between compression ratio (rk) and the efficiency of the Otto cycle? a. efficiency decreases with increase in compression ratio b. efficiency increases with increase in compression ratio c. efficiency is not affected by change in compression ratio d. none of the above

Description : What is the relation between compression ratio (rk) and the efficiency of the Otto cycle? a. efficiency decreases with increase in compression ratio b. efficiency increases with increase in compression ratio c. efficiency is not affected by change in compression ratio d. none of the above

Last Answer : ANSWER b. efficiency increases with increase in compression ratio

How the efficiency of the SI engine is affected by the specific heat ratio (γ) of the working fluid? a. the efficiency of the engine increases with increase in specific heat ratio (γ) of the working fluid b. the efficiency of the engine decreases with increase in specific heat ratio (γ) of the working fluid c. the efficiency of the engine does not affected by change in specific heat ratio (γ) of the working fluid d. none of the above

Description : How the efficiency of the SI engine is affected by the specific heat ratio (γ) of the working fluid? a. the efficiency of the engine increases with increase in specific heat ratio (γ) of the working ... not affected by change in specific heat ratio (γ) of the working fluid d. none of the above

Last Answer : ANSWER a. the efficiency of the engine increases with increase in specific heat ratio (γ) of the working fluid

A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered by the piston to sliding with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg

Description : A dash pot consists of a cylinder 10 cm in diameter in which slides a piston 12 cm long having a radial clearance of 1 mm. The cylinder is filled with oil having a viscosity of 1 poise. What will be the resistance offered ... with a velocity of 3 cm/sec a.1090 kg b.100 kg c.10900 kg d.10 kg e.50 kg

Last Answer : c. 10900 kg

An engine is supplied with 4 kW of heat energy. It is found that it produce 4 kW of work. Which kind of perpetual machine it is? Which law is violated? Also describe other kind of perpetual machine you know.

Description : An engine is supplied with 4 kW of heat energy. It is found that it produce 4 kW of work. Which kind of perpetual machine it is? Which law is violated? Also describe other kind of perpetual machine you know.

Last Answer : PMM-II: A heat engine which violates Kelvin plank statement of the second law of thermodynamics is known as Perpetual Motion Machine of the second kind (PMM-II). Or 100 percent efficient machine which is ... no machine can produce energy of its own without consuming any other form of energy.

Pick out the correct statement. (A) Compression ratio of an Otto engine is comparatively higher than a diesel engine (B) Efficiency of an Otto engine is higher than that of a diesel engine for the same compression ratio (C) Otto engine efficiency decreases with the rise in compression ratio, due to decrease in work produced per quantity of heat (D) Diesel engine normally operates at lower compression ratio than an Otto engine for an equal output of work

Description : Pick out the correct statement. (A) Compression ratio of an Otto engine is comparatively higher than a diesel engine (B) Efficiency of an Otto engine is higher than that of a diesel ... Diesel engine normally operates at lower compression ratio than an Otto engine for an equal output of work

Last Answer : (B) Efficiency of an Otto engine is higher than that of a diesel engine for the same compression ratio

The specific fuel consumption for diesel engine is approximately A. 0.15 kg/kWh B. 0.2 kg/kWh C. 28 kg/kWh D. 0.36 kg/kWh

Description : The specific fuel consumption for diesel engine is approximately A. 0.15 kg/kWh B. 0.2 kg/kWh C. 28 kg/kWh D. 0.36 kg/kWh

Last Answer : ANSWER : B

The specific fuel consumption per BHP hour for petrol engine is approximately a. 0.1 kg b. 0.2 kg c. 0.25 kg d. 0.35 kg

Description : The specific fuel consumption per BHP hour for petrol engine is approximately a. 0.1 kg b. 0.2 kg c. 0.25 kg d. 0.35 kg

Last Answer : ANSWER c. 0.25 kg

The specific fuel consumption per BHP hour for diesel engine is approximately a. 0.1 kg b. 0.2 kg c. 0.3 kg d. 0.4 kg

Description : The specific fuel consumption per BHP hour for diesel engine is approximately a. 0.1 kg b. 0.2 kg c. 0.3 kg d. 0.4 kg

Last Answer : ANSWER b. 0.2 kg

2000 kJ of heat is supplied to 500 kg of ice at 0oC. If the latent heat of fusion of ice is 335 kJ/kg then the amount of ice in kg melted will be a) 1.49 b) 83.75 c) 5.97 d) None of the above

Description : 2000 kJ of heat is supplied to 500 kg of ice at 0oC. If the latent heat of fusion of ice is 335 kJ/kg then the amount of ice in kg melted will be a) 1.49 b) 83.75 c) 5.97 d) None of the above

Last Answer : c) 5.97

When effect of variations in specific heats is considered then how do maximum temperature and pressure vary compared to air standard cycle ?

Description : When effect of variations in specific heats is considered then how do maximum temperature and pressure vary compared to air standard cycle ?

Last Answer : Temperature increases and pressure decreases.

The volume of standard air is _____ m3/kg of dry air. a. 0.533 b. 0.633 c. 0.733 d. 0.833 e. 0.933

Description : The volume of standard air is _____ m3/kg of dry air. a. 0.533 b. 0.633 c. 0.733 d. 0.833 e. 0.933

Last Answer : Answer: D

Standard air is the: a. Mass of 1 cubic meter of dry air at 20°C and atmospheric pressure b. Mass of a cubic meter of air at atmospheric conditions c. Volume of air at ambient temperature and atmospheric pressure d. Volume of 1 kg of dry air at 21°C and atmospheric pressure at sea level or 101.325 kPa e. Volume of 1 kg of air at 15°C and 100 kPa

Description : Standard air is the: a. Mass of 1 cubic meter of dry air at 20°C and atmospheric pressure b. Mass of a cubic meter of air at atmospheric conditions c. Volume of air at ambient temperature and atmospheric pressure ... pressure at sea level or 101.325 kPa e. Volume of 1 kg of air at 15°C and 100 kPa

Last Answer : Answer: D

Air fuel ratio at which a petrol engine cannot work is a. 8:1 b. 10:1 c. 20:1 and less d. 15:1

Description : Air fuel ratio at which a petrol engine cannot work is a. 8:1 b. 10:1 c. 20:1 and less d. 15:1

Last Answer : ANSWER c. 20:1 and less