In a ball mill, the volume occupied by the balls (when the mill is stopped) is about __________ percent of the volume of the mill. (A) 35 (B) 50 (C) 70 (D) 85

In a ball mill, the volume occupied by the balls (when the mill is
stopped) is about __________ percent of the volume of the mill.
(A) 35
(B) 50
(C) 70
(D) 85
by

1 Answer

Answer :

(B) 50
by

Related questions

For achieving maximum capacity of the ball mill, the ball charge should be equal to about __________ percent of the ball mill volume. (A) 10 (B) 25 (C) 50 (D) 75

Description : For achieving maximum capacity of the ball mill, the ball charge should be equal to about __________ percent of the ball mill volume. (A) 10 (B) 25 (C) 50 (D) 75

Last Answer : (C) 50

What is the critical rotation speed in revolutions per second, for a ball mill of 1.2 m diameter charged with 70 mm dia balls? (A) 0.5 (B) 1.0 (C) 2.76 (D) 0.66

Description : What is the critical rotation speed in revolutions per second, for a ball mill of 1.2 m diameter charged with 70 mm dia balls? (A) 0.5 (B) 1.0 (C) 2.76 (D) 0.66

Last Answer : (D) 0.66

P2O5 content in superphosphate is about __________ percent. (A) 30-35 (B) 15-20 (C) 65-70 (D) 85-90

Description : P2O5 content in superphosphate is about __________ percent. (A) 30-35 (B) 15-20 (C) 65-70 (D) 85-90

Last Answer : (B) 15-20

P2O5 content in triple superphosphate is about __________ percent. (A) 42-50 (B) 15-20 (C) 85-90 (D) 70-75

Description : P2O5 content in triple superphosphate is about __________ percent. (A) 42-50 (B) 15-20 (C) 85-90 (D) 70-75

Last Answer : (A) 42-50

Grinding efficiency of a ball mill is of the order of __________ percent. (A) 1-5 (B) 40-50 (C) 75-80 (D) 90-95

Description : Grinding efficiency of a ball mill is of the order of __________ percent. (A) 1-5 (B) 40-50 (C) 75-80 (D) 90-95

Last Answer : (A) 1-5

__________ balls capable of grinding the feed in a ball mill gives the maximum efficiency. (A) Cast iron (B) Minimum size (C) Maximum size (D) Elliptical

Description : __________ balls capable of grinding the feed in a ball mill gives the maximum efficiency. (A) Cast iron (B) Minimum size (C) Maximum size (D) Elliptical

Last Answer : (B) Minimum size

A __________ mixer resembles a ball mill without balls. (A) Banbury (B) Pug mill (C) Tumbling (D) Pan

Description : A __________ mixer resembles a ball mill without balls. (A) Banbury (B) Pug mill (C) Tumbling (D) Pan

Last Answer : (C) Tumbling

The thermal efficiency of a steel slab reheating furnace (walking beam type) may be about __________ percent. (A) 15 (B) 40 (C) 70 (D) 85

Description : The thermal efficiency of a steel slab reheating furnace (walking beam type) may be about __________ percent. (A) 15 (B) 40 (C) 70 (D) 85

Last Answer : (B) 40

Average human body contains about __________ percent water by weight. (A) 20 (B) 40 (C) 70 (D) 85

Description : Average human body contains about __________ percent water by weight. (A) 20 (B) 40 (C) 70 (D) 85

Last Answer : (C) 70

A tube mill as compared to a ball mill (A) Employs smaller balls (B) Gives finer size reduction but consumes more power (C) Has larger length/diameter ratio (>2 as compared to 1 for ball mill) (D) All (A), (B) and (C)

Description : A tube mill as compared to a ball mill (A) Employs smaller balls (B) Gives finer size reduction but consumes more power (C) Has larger length/diameter ratio (>2 as compared to 1 for ball mill) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Tube mill compared to ball mill (A) Produces finer products (B) Is long in comparison with its diameter (C) Uses smaller balls (D) All (A), (B) & (C)

Description : Tube mill compared to ball mill (A) Produces finer products (B) Is long in comparison with its diameter (C) Uses smaller balls (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

A tube mill compared to a ball mill (A) Has a higher length/diameter ratio(B) Produces a coarser product(C) Has a higher diameter/length ratio(D) Uses much larger balls

Description : A tube mill compared to a ball mill (A) Has a higher length/diameter ratio (B) Produces a coarser product (C) Has a higher diameter/length ratio (D) Uses much larger balls

Last Answer : (A) Has a higher length/diameter ratio

Balls in a ball mill are usually made of (A) Steel (B) Cast iron (C) Stainless steel (D) Bronze

Description : Balls in a ball mill are usually made of (A) Steel (B) Cast iron (C) Stainless steel (D) Bronze

Last Answer : (A) Steel

Carbon content in plain carbon steel is __________ percent. (A) 0.1 to 0.15 (B) 0.35 to 0.45 (C) 0.65 to 0.80 (D) 0.85 to 1.2

Description : Carbon content in plain carbon steel is __________ percent. (A) 0.1 to 0.15 (B) 0.35 to 0.45 (C) 0.65 to 0.80 (D) 0.85 to 1.2

Last Answer : (B) 0.35 to 0.45

Noise level in a quiet private business office is about __________ decibels. (A) 25 (B) 50 (C) 70 (D) 85

Description : Noise level in a quiet private business office is about __________ decibels. (A) 25 (B) 50 (C) 70 (D) 85

Last Answer : (B) 50

Average sulphur content in Indian pyrites is about __________ percent. (A) 15 (B) 35 (C) 55 (D) 70

Description : Average sulphur content in Indian pyrites is about __________ percent. (A) 15 (B) 35 (C) 55 (D) 70

Last Answer : (B) 35

Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Description : Equipment installation cost in a chemical process plant ranges from __________ percent of the purchased equipment cost. (A) 10 to 20 (B) 35 to 45 (C) 55 to 65 (D) 70 to 80

Last Answer : (B) 35 to 45

Cellulose content in bamboo fibre is about __________ percent. (A) 10 (B) 20 (C) 50 (D) 85

Description : Cellulose content in bamboo fibre is about __________ percent. (A) 10 (B) 20 (C) 50 (D) 85

Last Answer : (C) 50

Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight. (A) 85 (B) 65 (C) 50 (D) 98

Description : Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight. (A) 85 (B) 65 (C) 50 (D) 98

Last Answer : (A) 85

U-235 content in enriched uranium, that is normally used in power reactors (e.g., at Tarapur atomic power plant), is about __________ percent. (A) 85(B) 50 (C) 3 (D) 97

Description : U-235 content in enriched uranium, that is normally used in power reactors (e.g., at Tarapur atomic power plant), is about __________ percent. (A) 85 (B) 50 (C) 3 (D) 97

Last Answer : (C) 3

The thermal efficiency of an air/fuel gas preheating recuperator may be as high as __________ percent. (A) 50 (B) 65 (C) 85 (D) 99

Description : The thermal efficiency of an air/fuel gas preheating recuperator may be as high as __________ percent. (A) 50 (B) 65 (C) 85 (D) 99

Last Answer : (C) 85

285. Sucrose content in the raw juice extracted from sugar cane is about __________ percent(A) 1 - 2 (B) 15 - 20 (C) 50 - 60 (D) 80 - 85

Description : . Sucrose content in the raw juice extracted from sugar cane is about __________ percent (B) 15 - 20 (A) 1 - 2285 (C) 50 - 60 (D) 80 - 85

Last Answer : (B) 15 - 20

If water content of a soil is 40%, G is 2.70 and void ratio is 1.35, the degree of saturation is (A) 70 % (B) 75 % (C) 80 % (D) 85 %

Description : If water content of a soil is 40%, G is 2.70 and void ratio is 1.35, the degree of saturation is (A) 70 % (B) 75 % (C) 80 % (D) 85 %

Last Answer : Answer: Option C

For new lines, width of formation in bank for N.G single line is (a) 3.35 m (b) 3.70 m* (c ) 5.25 m (e) 5.85 m

Description : For new lines, width of formation in bank for N.G single line is (a) 3.35 m (b) 3.70 m* (c ) 5.25 m (e) 5.85 m

Last Answer : b) 3.70 m*

For new lines, width of formation in cutting for N.G. single line is (a) 3.35 m* (b) 3.70 m (c) 5.25 m (d) 5.85 m

Description : For new lines, width of formation in cutting for N.G. single line is (a) 3.35 m* (b) 3.70 m (c) 5.25 m (d) 5.85 m

Last Answer : a) 3.35 m*

On selling 25 balls at Rs. 1015, there is a profit equal to the cost price of 10 balls. What is the cost price of a ball? a) Rs. 31 b) Rs. 29 c) Rs. 35 d) Rs. 27 e) Rs. 39

Description : On selling 25 balls at Rs. 1015, there is a profit equal to the cost price of 10 balls. What is the cost price of a ball? a) Rs. 31 b) Rs. 29 c) Rs. 35 d) Rs. 27 e) Rs. 39

Last Answer : b Profit = (S.P of 25 balls) - (C.P of 25 balls) = 1015 - (C.P of 25 balls) Given that Profit = (C.P of 10 balls) => 1015 - (C.P of 25 balls) = (C.P of 10 balls) => (C.P of 25 balls) + (C.P of 10 balls) = 1015 => C.P of 35 balls = 1015 => C.P of 1 ball=1015 / 35 = Rs. 29

The conversion of caprolactam in the above case is about __________ percent. (A) 25 (B) 50 (C) 70 (D) 90

Description : The conversion of caprolactam in the above case is about __________ percent. (A) 25 (B) 50 (C) 70 (D) 90

Last Answer : (D) 90

Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Description : Overall thermal efficiency of a lumpy coal fired suitably designed heating furnace, if operated & maintained properly may be about __________ percent. (A) 10-15 (B) 25-30 (C) 45-50 (D) 65-70

Last Answer : (B) 25-30

Sucrose content in cane sugar may be around __________ percent. (A) 50 (B) 70 (C) 95(D) 80

Description : Sucrose content in cane sugar may be around __________ percent. (A) 50 (B) 70 (C) 95 (D) 80

Last Answer : (C) 95

The amount of benzene present in pure Benzol is about __________ percent. (A) 30 (B) 50 (C) 70 (D) 90

Description : The amount of benzene present in pure Benzol is about __________ percent. (A) 30 (B) 50 (C) 70 (D) 90

Last Answer : (C) 70

Cost of instrumentation in a modern chemical plant ranges from __________ percent of the total plant cost. (A) 5 to 10 (B) 20 to 30 (C) 40 to 50 (D) 60 to 70

Description : Cost of instrumentation in a modern chemical plant ranges from __________ percent of the total plant cost. (A) 5 to 10 (B) 20 to 30 (C) 40 to 50 (D) 60 to 70

Last Answer : (B) 20 to 30

Hardgrove Grindability index of four coal samples are given below. Which of them is the easiest to grind? (A) 50 (B) 70 (C) 85 (D) 100

Description : Hardgrove Grindability index of four coal samples are given below. Which of them is the easiest to grind? (A) 50 (B) 70 (C) 85 (D) 100

Last Answer : (D) 100

High speed cutting tool steels contain about __________ percent of tungsten. (A) 6-8 (B) 18-20 (C) 30-35 (D) 50-55

Description : High speed cutting tool steels contain about __________ percent of tungsten. (A) 6-8 (B) 18-20 (C) 30-35 (D) 50-55

Last Answer : (B) 18-20

A sample of natural gas containing 80% methane (CH4 ) and rest nitrogen (N2 ) is burnt with 20% excess air. With 80% of the combustibles producing CO2 and the remainder going to CO, the Orsat analysis in volume percent is (A) CO2 : 6.26, CO : 1.56, O2 : 3.91, H2O :15.66, N2 : 72.60 (B) CO2 : 7.42, CO : 1.86, O2 : 4.64, N2 :86.02 (C) CO2 : 6.39, CO : 1.60, O2 : 3.99, H2O:25.96, N2 :72.06 (D) CO2 : 7.60, CO : 1.90, O2 : 4.75, N2 : 85.74

Description : A sample of natural gas containing 80% methane (CH4 ) and rest nitrogen (N2 ) is burnt with 20% excess air. With 80% of the combustibles producing CO2 and the remainder going to CO, the Orsat analysis in volume percent is (A) CO2 : 6 ... 96, N2 :72.06 (D) CO2 : 7.60, CO : 1.90, O2 : 4.75, N2 : 85.74

Last Answer : (B) CO2 : 7.42, CO : 1.86, O2 : 4.64, N2 :86.02

Cetane number of diesel used in trucks may be about (A) 50 (B) 14 (C) 35 (D) 85

Description : Cetane number of diesel used in trucks may be about (A) 50 (B) 14 (C) 35 (D) 85

Last Answer : (A) 50

A cylinder contains 640 gm of liquid oxygen. The volume occupied (in litres) by the oxygen, when it is released and brought to standard conditions (0°C, 760 mm Hg) will be __________ litres. (A) 448 (B) 224 (C) 22.4 (D) Data insufficient; can't be computed

Description : A cylinder contains 640 gm of liquid oxygen. The volume occupied (in litres) by the oxygen, when it is released and brought to standard conditions (0°C, 760 mm Hg) will be __________ litres. (A) 448 (B) 224 (C) 22.4 (D) Data insufficient; can't be computed

Last Answer : (A) 448

Run of mine (ROM) coal is crushed by a __________ for use in domestic ovens. (A) Jaw crusher (B) Hammer crusher (C) Ball mill (D) Tube mil

Description : Run of mine (ROM) coal is crushed by a __________ for use in domestic ovens. (A) Jaw crusher (B) Hammer crusher (C) Ball mill (D) Tube mil

Last Answer : (B) Hammer crusher

The operating speed of a ball mill should be __________ the critical speed. (A) Less than (B) Much more than (C) At least equal to (D) Slightly more than

Description : The operating speed of a ball mill should be __________ the critical speed. (A) Less than (B) Much more than (C) At least equal to (D) Slightly more than

Last Answer : (A) Less than

Maximum size reduction in a ball mill is done by the, __________ action. (A) Attrition (B) Compression (C) Impact (D) Cutting

Description : Maximum size reduction in a ball mill is done by the, __________ action. (A) Attrition (B) Compression (C) Impact (D) Cutting

Last Answer : (C) Impact

The ordinary and maximum tolerance limit of sound by human being is – (1) 50 db to 70 db (decibel) (2) 60 db to 80 db (decibel) (3) 65 db to 75 db (decibel) (4) 70 db to 85 db (decibel)

Description : The ordinary and maximum tolerance limit of sound by human being is – (1) 50 db to 70 db (decibel) (2) 60 db to 80 db (decibel) (3) 65 db to 75 db (decibel) (4) 70 db to 85 db (decibel)

Last Answer : (2) 60 db to 80 db (decibel) Explanation: Normal speech is about 60 dB (decibels). A dangerous sound is anything that is 80 dB or higher which can lead to hearing loss. At 70 dB or ... the risk of harm to healthy ears is negligible. Listening to sound above 80 decibels can cause profound deafness.

Cost of fencing a circular plot at the rate of Rs.15 per metre is Rs.3, 300. What will be the cost of flooring the plot at the rate of Rs.100 per square metre? a) Rs.3, 85,000 b) Rs.4, 70,000 c) Rs.2, 25,000 d) Rs.3, 50,000 e) Rs.2, 95,000

Description : Cost of fencing a circular plot at the rate of Rs.15 per metre is Rs.3, 300. What will be the cost of flooring the plot at the rate of Rs.100 per square metre? a) Rs.3, 85,000 b) Rs.4, 70,000 c) Rs.2, 25,000 d) Rs.3, 50,000 e) Rs.2, 95,000

Last Answer : Perimeter of plot = 3300/15 = 220 meter 2πr = 220 2 × 22/7 × r = 220 r = 35 m. Area of plot = πr^2 = 22/7 × 35 × 35 = 3850 mt^2 Cost of flooring = 3850 × 100=Rs. 385000 Answer: a)

The summarized balance sheet of Rakesh udyog Limited shows the balances of previous and current year of provision for taxation Rs. 50,000 and Rs. 65,000. If taxed paid during the current year amounted to Rs. 70,000 then amount charge from Profit and Loss Account will be: (a) Rs. 55,000 (b) Rs. 85,000 (c) Rs. 45,000 (d) Rs. 1,85,000

Description : The summarized balance sheet of Rakesh udyog Limited shows the balances of previous and current year of provision for taxation Rs. 50,000 and Rs. 65,000. If taxed paid during the current year amounted to Rs. 70,000 then amount charge ... a) Rs. 55,000 (b) Rs. 85,000 (c) Rs. 45,000 (d) Rs. 1,85,000

Last Answer : (b) Rs. 85,000

The ordinary and maximum tolerance limit of sound by human being is (1) 50 db to 70 db (decibel) (2) 60 db to 80 db (decibel) (3) 65 db to 75 db (decibel) (4) 70 db to 85 db (decibel)

Description : The ordinary and maximum tolerance limit of sound by human being is (1) 50 db to 70 db (decibel) (2) 60 db to 80 db (decibel) (3) 65 db to 75 db (decibel) (4) 70 db to 85 db (decibel)

Last Answer : 60 db to 80 db (decibel)

In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right compensation, the trajectory of the cutter will be a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5) b.(0,-5), (55,-5), (55, 35), (-5, 35), (-5,-5) c.(5, 5), (5, 25), (45, 25), (45, 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Description : In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right ... , 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)

Last Answer : a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5)

Steel balls for ball bearings are generally made of __________ steel. (A) Cast (B) Stainless (C) Free carbon (D) Carbon chrome

Description : Steel balls for ball bearings are generally made of __________ steel. (A) Cast (B) Stainless (C) Free carbon (D) Carbon chrome

Last Answer : (D) Carbon chrome

Percent reduction in yield in case of onion due to weeds is a). 20-30 b). 30-35 c). 60-70 d).15-20

Description : Percent reduction in yield in case of onion due to weeds is a). 20-30 b). 30-35 c). 60-70 d).15-20

Last Answer : c). 60-70

The average score in a bank examination of 13 students of a class is 50. If the scores of the top five students are not considered, the average score of the remaining students falls by 5. The pass mark was 35 and the maximum mark was 100. It is also known that none of the students failed. If each of the top five scorers had distinct integral scores, the maximum possible score of the topper is. A) 85 B) 90 C) 95 D) 100

Description : The average score in a bank examination of 13 students of a class is 50. If the scores of the top five students are not considered, the average score of the remaining students falls by 5. The pass mark ... integral scores, the maximum possible score of the topper is. A) 85 B) 90 C) 95 D) 100

Last Answer : D Average = Sum of observations/Number of observations Given, average score in a bank examination of 13 students of a class is 50. Sum of total scores = 13 50= 650 Given, if the scores of the top five students are not ... b + c + d + e = 290 ⇒46+ 47 + 48+ 49 +e = 290 ⇒e = 100

Fast breeder nuclear reactors using enriched uranium as fuel may contain upto a maximum of __________ percent of U-235 (i.e. fissile material). (A) 15 (B) 45 (C) 65 (D) 85

Description : Fast breeder nuclear reactors using enriched uranium as fuel may contain upto a maximum of __________ percent of U-235 (i.e. fissile material). (A) 15 (B) 45 (C) 65 (D) 85

Last Answer : (D) 85

Purity of electrical grade aluminium should be ≥ __________ percent. (A) 95 (B) 99.5 (C) 85 (D) 90

Description : Purity of electrical grade aluminium should be ≥ __________ percent. (A) 95 (B) 99.5 (C) 85 (D) 90

Last Answer : (B) 99.5