Cellulose content in bamboo fibre is about __________ percent. (A) 10 (B) 20 (C) 50 (D) 85

Cellulose content in bamboo fibre is about __________ percent.
(A) 10
(B) 20
(C) 50
(D) 85
by

1 Answer

Answer :

(C) 50
by

Related questions

Cellulose percentage in bamboo fibre is about (A) 10 (B) 20 (C) 50 (D) 85

Description : Cellulose percentage in bamboo fibre is about (A) 10 (B) 20 (C) 50 (D) 85

Last Answer : (C) 50

Cellulose content of bamboo and ideal fibrous raw material for the manufacture of paper is __________ percent. (A) 10 (B) 50 (C) 80 (D) 95

Description : Cellulose content of bamboo and ideal fibrous raw material for the manufacture of paper is __________ percent. (A) 10 (B) 50 (C) 80 (D) 95

Last Answer : (B) 50

Paper grade bamboo contains about __________ percent cellulose. (A) 5 (B) 20 (C) 40 (D) 60

Description : Paper grade bamboo contains about __________ percent cellulose. (A) 5 (B) 20 (C) 40 (D) 60

Last Answer : (A) 5

P2O5 content in triple superphosphate is about __________ percent. (A) 42-50 (B) 15-20 (C) 85-90 (D) 70-75

Description : P2O5 content in triple superphosphate is about __________ percent. (A) 42-50 (B) 15-20 (C) 85-90 (D) 70-75

Last Answer : (A) 42-50

285. Sucrose content in the raw juice extracted from sugar cane is about __________ percent(A) 1 - 2 (B) 15 - 20 (C) 50 - 60 (D) 80 - 85

Description : . Sucrose content in the raw juice extracted from sugar cane is about __________ percent (B) 15 - 20 (A) 1 - 2285 (C) 50 - 60 (D) 80 - 85

Last Answer : (B) 15 - 20

Pick out the wrong statement. (A) Fibrillation of fibre during paper manufacture is done to develop the strength in paper (B) Alkali consumption in digestion/cooking of bamboo is measured in terms of permanganate number (C) Bagasse fibre contains both lignin & cellulose (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Description : Pick out the wrong statement. (A) Fibrillation of fibre during paper manufacture is done to develop the strength in paper (B) Alkali consumption in digestion/cooking of bamboo is measured in terms ... both lignin & cellulose (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

Last Answer : (D) Presence of sodium sulphate in pulp makes the pulp bleachability poor

U-235 content in enriched uranium, that is normally used in power reactors (e.g., at Tarapur atomic power plant), is about __________ percent. (A) 85(B) 50 (C) 3 (D) 97

Description : U-235 content in enriched uranium, that is normally used in power reactors (e.g., at Tarapur atomic power plant), is about __________ percent. (A) 85 (B) 50 (C) 3 (D) 97

Last Answer : (C) 3

P2O5 content in superphosphate is about __________ percent. (A) 30-35 (B) 15-20 (C) 65-70 (D) 85-90

Description : P2O5 content in superphosphate is about __________ percent. (A) 30-35 (B) 15-20 (C) 65-70 (D) 85-90

Last Answer : (B) 15-20

Iron content in Indian iron ore is about __________ percent. (A) 80-85 (B) 60-65 (C) 40-45 (D) 20-25

Description : Iron content in Indian iron ore is about __________ percent. (A) 80-85 (B) 60-65 (C) 40-45 (D) 20-25

Last Answer : (B) 60-65

. Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about __________ percent. (A) 75 (B) < 10 (C) > 30 (D) 50

Description : . Most easily and cheaply available fibrous raw material for paper manufacture available in India is bamboo. The yield of pulp produced from fibrous raw material by mechanical process is about __________ percent. (A) 75 (B) < 10 (C) > 30 (D) 50

Last Answer : (B) < 10

The main aim behind cooling the digested chip at the bottom portion of the digestor by injecting cold black liquor is to (A) Avoid mechanical weakening of fibre (B) Remove lignin by way of crystallisation (C) Increase the cellulose content (D) None of these

Description : The main aim behind cooling the digested chip at the bottom portion of the digestor by injecting cold black liquor is to (A) Avoid mechanical weakening of fibre (B) Remove lignin by way of crystallisation (C) Increase the cellulose content (D) None of these

Last Answer : (A) Avoid mechanical weakening of fibre

Carbon content in plain carbon steel is __________ percent. (A) 0.1 to 0.15 (B) 0.35 to 0.45 (C) 0.65 to 0.80 (D) 0.85 to 1.2

Description : Carbon content in plain carbon steel is __________ percent. (A) 0.1 to 0.15 (B) 0.35 to 0.45 (C) 0.65 to 0.80 (D) 0.85 to 1.2

Last Answer : (B) 0.35 to 0.45

Alcohol content in freshly prepared natural and fortified **** may be respectively around __________ percent. (A) 7-14 and 14-30 (B) 7-14 and 40-50 (C) 14 - 30 and 40-50 (D) 10 - 20 and 40 - 50

Description : Alcohol content in freshly prepared natural and fortified wine may be respectively around __________ percent. (A) 7-14 and 14-30 (B) 7-14 and 40-50 (C) 14 - 30 and 40-50 (D) 10 - 20 and 40 - 50

Last Answer : (A) 7-14 and 14-30

Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight. (A) 85 (B) 65 (C) 50 (D) 98

Description : Gasoline yield in catalytic reforming of naphtha may be about __________ percent by weight. (A) 85 (B) 65 (C) 50 (D) 98

Last Answer : (A) 85

In a ball mill, the volume occupied by the balls (when the mill is stopped) is about __________ percent of the volume of the mill. (A) 35 (B) 50 (C) 70 (D) 85

Description : In a ball mill, the volume occupied by the balls (when the mill is stopped) is about __________ percent of the volume of the mill. (A) 35 (B) 50 (C) 70 (D) 85

Last Answer : (B) 50

The thermal efficiency of an air/fuel gas preheating recuperator may be as high as __________ percent. (A) 50 (B) 65 (C) 85 (D) 99

Description : The thermal efficiency of an air/fuel gas preheating recuperator may be as high as __________ percent. (A) 50 (B) 65 (C) 85 (D) 99

Last Answer : (C) 85

Average human body contains about __________ percent water by weight. (A) 20 (B) 40 (C) 70 (D) 85

Description : Average human body contains about __________ percent water by weight. (A) 20 (B) 40 (C) 70 (D) 85

Last Answer : (C) 70

150. Nitrogen content in ammonium sulphate (a fertiliser) is around __________ percent. (A) 5 (B) 20 (C) 50 (D) 65

Description : 150. Nitrogen content in ammonium sulphate (a fertiliser) is around __________ percent. (A) 5 (B) 20 (C) 50 (D) 65

Last Answer : (B) 20

Carbon Content by weight in air dried wood may be about __________ percent. (A) 10 (B) 25 (C) 50 (D) 80

Description : Carbon Content by weight in air dried wood may be about __________ percent. (A) 10 (B) 25 (C) 50 (D) 80

Last Answer : (C) 50

Nitrogen content of calcium ammonium nitrate (CAN) is __________ percent. (A) 10 (B) 25 (C) 50 (D) 80

Description : Nitrogen content of calcium ammonium nitrate (CAN) is __________ percent. (A) 10 (B) 25 (C) 50 (D) 80

Last Answer : (B) 25

_________ is a natural fibre. (A) Cellulose (B) Dacron (C) Nylon-6 (D) None of these

Description : _________ is a natural fibre. (A) Cellulose (B) Dacron (C) Nylon-6 (D) None of these

Last Answer : (A) Cellulose

Which of the following is not present in bagasse fibre? (A) Cellulose (B) Lignin (C) Pentogens (D) None of these

Description : Which of the following is not present in bagasse fibre? (A) Cellulose (B) Lignin (C) Pentogens (D) None of these

Last Answer : (D) None of these

Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) Crimp is a measure of the difference between the length of the straightened and unstraightened fibre (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Description : Pick out the wrong statement. (A) Denier is defined as weight in gm of 9000 metres length of a fibre, while tex is defined as weight in gm of 1000 metres length of fibre (B) ... fibres are all prepared by wet spinning (D) Nylon fibres have greater water absorption capacity than polyester fibres

Last Answer : (C) Dacron fibres, acrylic fibres, viscose rayon fibres & cellulose acetate fibres are all prepared by wet spinning

Main constituent of cotton fibre is (A) Lignin (B) Cellulose (C) Starch (D) Gelatine

Description : Main constituent of cotton fibre is (A) Lignin (B) Cellulose (C) Starch (D) Gelatine

Last Answer : (B) Cellulose

Which of the following is not present in bagasse fibre? (A) Cellulose (B) Lignin (C) Pentogens (D) None of these

Description : Which of the following is not present in bagasse fibre? (A) Cellulose (B) Lignin (C) Pentogens (D) None of these

Last Answer : (D) None of these

The optimum moisture content in solids to be crushed/ground ranges from __________ percent. (A) 3 to 4 (B) 8 to 10 (C) 10 to 15 (D) 15 to 20

Description : The optimum moisture content in solids to be crushed/ground ranges from __________ percent. (A) 3 to 4 (B) 8 to 10 (C) 10 to 15 (D) 15 to 20

Last Answer : (A) 3 to 4

Sugar content in sugarcane on cane basis is about __________ percent by weight. (A) 1 to 5 (B) 5 to 10 (C) 15 to 20 (D) 20 to 30

Description : Sugar content in sugarcane on cane basis is about __________ percent by weight. (A) 1 to 5 (B) 5 to 10 (C) 15 to 20 (D) 20 to 30

Last Answer : (B) 5 to 10

Plywood is made from (A) Common timber (B) Bamboo fibre (C) Teak wood only (D) Asbestos sheets

Description : Plywood is made from (A) Common timber (B) Bamboo fibre (C) Teak wood only (D) Asbestos sheets

Last Answer : Answer: Option C

Fast breeder nuclear reactors using enriched uranium as fuel may contain upto a maximum of __________ percent of U-235 (i.e. fissile material). (A) 15 (B) 45 (C) 65 (D) 85

Description : Fast breeder nuclear reactors using enriched uranium as fuel may contain upto a maximum of __________ percent of U-235 (i.e. fissile material). (A) 15 (B) 45 (C) 65 (D) 85

Last Answer : (D) 85

Purity of electrical grade aluminium should be ≥ __________ percent. (A) 95 (B) 99.5 (C) 85 (D) 90

Description : Purity of electrical grade aluminium should be ≥ __________ percent. (A) 95 (B) 99.5 (C) 85 (D) 90

Last Answer : (B) 99.5

The thermal efficiency of a steel slab reheating furnace (walking beam type) may be about __________ percent. (A) 15 (B) 40 (C) 70 (D) 85

Description : The thermal efficiency of a steel slab reheating furnace (walking beam type) may be about __________ percent. (A) 15 (B) 40 (C) 70 (D) 85

Last Answer : (B) 40

The ideal pulp for the manufacture of paper should have high __________ content. (A) Cellulose (B) Lignin (C) Both (A) & (B) (D) None of these

Description : The ideal pulp for the manufacture of paper should have high __________ content. (A) Cellulose (B) Lignin (C) Both (A) & (B) (D) None of these

Last Answer : (A) Cellulose

Sucrose content in cane sugar may be around __________ percent. (A) 50 (B) 70 (C) 95(D) 80

Description : Sucrose content in cane sugar may be around __________ percent. (A) 50 (B) 70 (C) 95 (D) 80

Last Answer : (C) 95

What is the best source of pure cellulose? (a) Coir (b) Cotton fibre (c) Jute fibre (d) Hemp

Description : What is the best source of pure cellulose? (a) Coir (b) Cotton fibre (c) Jute fibre (d) Hemp

Last Answer : Ans: (b)

Which of the following constitutes fibre or roughage in food? (A) Cellulose (B) Pectin (C) Inulin (D) All of these

Description : Which of the following constitutes fibre or roughage in food? (A) Cellulose (B) Pectin (C) Inulin (D) All of these

Last Answer : Answer : D

Silk fibre chemically is – (1) Carbohydrate (2) Fat (3) Protein (4) Cellulose

Description : Silk fibre chemically is – (1) Carbohydrate (2) Fat (3) Protein (4) Cellulose

Last Answer : (3) Protein Explanation: Silk is a natural protein fibre, some forms of which can be woven into textiles. The protein fibre of silk is composed mainly of fibroin and produced by ... fibre, which allows silk cloth to refract incoming light at different angles, thus producing different colours.

Silk fibre chemically is : (1) Carbohydrate (2) Fat (3) Protein (4) Cellulose

Description : Silk fibre chemically is : (1) Carbohydrate (2) Fat (3) Protein (4) Cellulose

Last Answer : Protein

Cost of instrumentation in a modern chemical plant ranges from __________ percent of the total plant cost. (A) 5 to 10 (B) 20 to 30 (C) 40 to 50 (D) 60 to 70

Description : Cost of instrumentation in a modern chemical plant ranges from __________ percent of the total plant cost. (A) 5 to 10 (B) 20 to 30 (C) 40 to 50 (D) 60 to 70

Last Answer : (B) 20 to 30

The ratio of working capital to total capital investment for most chemical plants (except for non-seasonal based products) is in the range of __________ percent. (A) 0.1 to 1 (B) 1 to 2 (C) 10 to 20 (D) 50 to 60

Description : The ratio of working capital to total capital investment for most chemical plants (except for non-seasonal based products) is in the range of __________ percent. (A) 0.1 to 1 (B) 1 to 2 (C) 10 to 20 (D) 50 to 60

Last Answer : (C) 10 to 20

Oxygen content in a flue gas was found to be 4%. It implies that excess air used for combustion was around __________ percent. (A) 4 (B) 96 (C) 20 (D) 40

Description : Oxygen content in a flue gas was found to be 4%. It implies that excess air used for combustion was around __________ percent. (A) 4 (B) 96 (C) 20 (D) 40

Last Answer : (C) 20

The Al2O3 content of cryolite in Hall-Heroult cell is maintained between __________ percent. (A) 2-5 (B) 18-20 (C) 12-15 (D) 6-12

Description : The Al2O3 content of cryolite in Hall-Heroult cell is maintained between __________ percent. (A) 2-5 (B) 18-20 (C) 12-15 (D) 6-12

Last Answer : (A) 2-5

High speed cutting tool steels contain about __________ percent of tungsten. (A) 6-8 (B) 18-20 (C) 30-35 (D) 50-55

Description : High speed cutting tool steels contain about __________ percent of tungsten. (A) 6-8 (B) 18-20 (C) 30-35 (D) 50-55

Last Answer : (B) 18-20

Thermal efficiency of an open hearth furnace may be about __________ percent. (A) 5 (B) 20 (C) 50 (D) 80

Description : Thermal efficiency of an open hearth furnace may be about __________ percent. (A) 5 (B) 20 (C) 50 (D) 80

Last Answer : (B) 20

Noise level in a quiet private business office is about __________ decibels. (A) 25 (B) 50 (C) 70 (D) 85

Description : Noise level in a quiet private business office is about __________ decibels. (A) 25 (B) 50 (C) 70 (D) 85

Last Answer : (B) 50

Water content in the crude oil as it comes out of oil well may be upto __________ percent. (A) 2 (B) 5 (C) 10 (D) 25

Description : Water content in the crude oil as it comes out of oil well may be upto __________ percent. (A) 2 (B) 5 (C) 10 (D) 25

Last Answer : (D) 25

Volatile matter content of metallurgical coke may be around __________ percent. (A) 1-2 (B) 10-15 (C) 22-26 (D) 30-33

Description : Volatile matter content of metallurgical coke may be around __________ percent. (A) 1-2 (B) 10-15 (C) 22-26 (D) 30-33

Last Answer : (A) 1-2

Nitrogen content of urea is about __________ percent. (A) 10 (B) 46 (C) 80 (D) 94

Description : Nitrogen content of urea is about __________ percent. (A) 10 (B) 46 (C) 80 (D) 94

Last Answer : (B) 46

Solid content in most of the domestic sewage is about __________ percent. (A) 0.001 (B) 0.1 (C) 5 (D) 10

Description : Solid content in most of the domestic sewage is about __________ percent. (A) 0.001 (B) 0.1 (C) 5 (D) 10

Last Answer : (B) 0.1

Maximum change in the hardness of martensite occurs in the carbon content range of __________ percent in steel. (A) 0.01 to 0.10 (B) 0.2 to 0.4 (C) 0.5 to 0.7 (D) 0.8 to 1.0

Description : Maximum change in the hardness of martensite occurs in the carbon content range of __________ percent in steel. (A) 0.01 to 0.10 (B) 0.2 to 0.4 (C) 0.5 to 0.7 (D) 0.8 to 1.0

Last Answer : (B) 0.2 to 0.4

Production of one ton of dry paper pulp requires about __________ tons of bamboo or wood. (A) 1 (B) 2.5 (C) 5 (D) 10

Description : Production of one ton of dry paper pulp requires about __________ tons of bamboo or wood. (A) 1 (B) 2.5 (C) 5 (D) 10

Last Answer : (B) 2.5