Close circuit grinding by a ball mill with air sweeping employs a (A) Classifier (B) Cyclone separator between mill & classifier (C) Both (A) & (B) (D) Neither (A) nor (B)

Close circuit grinding by a ball mill with air sweeping employs a
(A) Classifier
(B) Cyclone separator between mill & classifier
(C) Both (A) & (B)
(D) Neither (A) nor (B)
by

1 Answer

Answer :

(C) Both (A) & (B)
by

Related questions

Hydro-cyclone is a (A) Crusher (B) wet classifier (C) Dry classifier (D) Magnetic separator

Description : Hydro-cyclone is a (A) Crusher (B) wet classifier (C) Dry classifier (D) Magnetic separator

Last Answer : (B) wet classifier

A pebble mill (A) Is a ball mill (B) Employs flints or ceramic pebbles as the grinding medium (C) Is a tube mill lined with ceramic or other non-metallic liner (D) Both (B) and (C)

Description : A pebble mill (A) Is a ball mill (B) Employs flints or ceramic pebbles as the grinding medium (C) Is a tube mill lined with ceramic or other non-metallic liner (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Pick out the wrong statement. (A) Close circuit grinding is more economical than open circuit grinding (B) Cod oil, beef tallow or aluminium stearates are used as grinding aids in cement 'industries' (C) The equipment used for the removal of traces of solids from a liquid is called a classifier (D) Size enlargement is a mechanical operation exemplified by medicinal tablet making

Description : Pick out the wrong statement. (A) Close circuit grinding is more economical than open circuit grinding (B) Cod oil, beef tallow or aluminium stearates are used as grinding aids in cement ... is called a classifier (D) Size enlargement is a mechanical operation exemplified by medicinal tablet making

Last Answer : (C) The equipment used for the removal of traces of solids from a liquid is called a classifier

The mechanism of size reduction by a hammer mill is by impact and attrition between the (A) Grinding element & the housing (B) Feed particles (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The mechanism of size reduction by a hammer mill is by impact and attrition between the (A) Grinding element & the housing (B) Feed particles (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Which of the following size reduction equipments employs mainly attrition for ultrafine grinding? (A) Jet mills (B) Fluid energy mill (C) Micronizer (D) All (A), (B) and (C)

Description : Which of the following size reduction equipments employs mainly attrition for ultrafine grinding? (A) Jet mills (B) Fluid energy mill (C) Micronizer (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

__________ employs a set of screen across a flow channel for the separation of dirt/rust from a flowing liquid stream. (A) Thickener (B) Classifier (C) Strainer (D) Clarifier

Description : __________ employs a set of screen across a flow channel for the separation of dirt/rust from a flowing liquid stream. (A) Thickener (B) Classifier (C) Strainer (D) Clarifier

Last Answer : (C) Strainer

The grinding in a hammer crusher takes place due to the (A) Attrition (B) Impact (C) Both (A) & (B) (D) Neither (A) nor (B

Description : The grinding in a hammer crusher takes place due to the (A) Attrition (B) Impact (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Use of grinding aids results in the (A) Enhanced production rate (B) Finer products (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Use of grinding aids results in the (A) Enhanced production rate (B) Finer products (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

A tube mill as compared to a ball mill (A) Employs smaller balls (B) Gives finer size reduction but consumes more power (C) Has larger length/diameter ratio (>2 as compared to 1 for ball mill) (D) All (A), (B) and (C)

Description : A tube mill as compared to a ball mill (A) Employs smaller balls (B) Gives finer size reduction but consumes more power (C) Has larger length/diameter ratio (>2 as compared to 1 for ball mill) (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Dust collection efficiency of a cyclone separator depends upon its (A) Diameter (B) Inlet gas velocity (C) Overall height (D) All (A), (B) & (C)

Description : Dust collection efficiency of a cyclone separator depends upon its (A) Diameter (B) Inlet gas velocity (C) Overall height (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Dust laden air can be purified using a (A) Cyclone separator (B) Bag filter (C) Gravity settler (D) Tubular centrifuge

Description : Dust laden air can be purified using a (A) Cyclone separator (B) Bag filter (C) Gravity settler (D) Tubular centrifuge

Last Answer : (A) Cyclone separator

. The most suitable equipment for removing the fine dust particle (< 1 micron dia.) from air below its dew point will be a/an (A) Bag filter (B) Electrostatic precipitator (C) Cyclone separator (D) Wet scrubber

Description : . The most suitable equipment for removing the fine dust particle (< 1 micron dia.) from air below its dew point will be a/an (A) Bag filter (B) Electrostatic precipitator (C) Cyclone separator (D) Wet scrubber

Last Answer : (B) Electrostatic precipitator

In case of grinding in a ball mill (A) Wet grinding achieves a finer product size than dry grinding (B) Its capacity decreases with increasing fineness of the products (C) Grinding cost and power requirement increases with increasing fineness of the products (D) All (A), (B) and (C)

Description : In case of grinding in a ball mill (A) Wet grinding achieves a finer product size than dry grinding (B) Its capacity decreases with increasing fineness of the products (C) Grinding cost and power requirement increases with increasing fineness of the products (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

For grinding of cereals, grains, spices, pigments, saw dust, cork etc., the most extensively used size reduction equipment is a(A) Buhrstone mill(B) Ball mill(C) Crushing rolls(D) Hammer mill

Description : For grinding of cereals, grains, spices, pigments, saw dust, cork etc., the most extensively used size reduction equipment is a (A) Buhrstone mill (B) Ball mill (C) Crushing rolls (D) Hammer mill

Last Answer : (A) Buhrstone mill

__________ balls capable of grinding the feed in a ball mill gives the maximum efficiency. (A) Cast iron (B) Minimum size (C) Maximum size (D) Elliptical

Description : __________ balls capable of grinding the feed in a ball mill gives the maximum efficiency. (A) Cast iron (B) Minimum size (C) Maximum size (D) Elliptical

Last Answer : (B) Minimum size

The main differentiation factor between tube mill and ball mill is the (A) Length to diameter ratio (B) Size of the grinding media (C) Final product size (D) Operating speed

Description : The main differentiation factor between tube mill and ball mill is the (A) Length to diameter ratio (B) Size of the grinding media (C) Final product size (D) Operating speed

Last Answer : (A) Length to diameter ratio

Ball mill is used for (A) Crushing (B) Coarse grinding (C) Fine grinding (D) Attrition

Description : Ball mill is used for (A) Crushing (B) Coarse grinding (C) Fine grinding (D) Attrition

Last Answer : (C) Fine grinding

Actual operating speed of a ball mill may vary from 65 to 80% of the critical speed. Which of the following duties would require the ball mill to be operated at maximum percentage of critical speed? (A) Wet grinding in low viscous suspension (B) Wet grinding in high viscous suspension (C) Dry grinding of large particles (upto 1.25 cms) (D) Dry grinding of large particles in un-baffed mills

Description : Actual operating speed of a ball mill may vary from 65 to 80% of the critical speed. Which of the following duties would require the ball mill to be operated at maximum percentage of critical speed? (A) ... of large particles (upto 1.25 cms) (D) Dry grinding of large particles in un-baffed mills

Last Answer : (D) Dry grinding of large particles in un-baffed mills

Grinding efficiency of a ball mill is of the order of __________ percent. (A) 1-5 (B) 40-50 (C) 75-80 (D) 90-95

Description : Grinding efficiency of a ball mill is of the order of __________ percent. (A) 1-5 (B) 40-50 (C) 75-80 (D) 90-95

Last Answer : (A) 1-5

Size reduction of moulding powders, waxes, resins & gums are done in a __________ mill. (A) Cage (B) Hammer (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Size reduction of moulding powders, waxes, resins & gums are done in a __________ mill. (A) Cage (B) Hammer (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

In the cyclone separator used for separation of dust from dust laden gas, the gas (A) Enters the cyclone from the top (B) Is admitted tangentially at high velocity (C) Develops a helical motion inside the chamber(D) Both (B) and (C

Description : In the cyclone separator used for separation of dust from dust laden gas, the gas (A) Enters the cyclone from the top (B) Is admitted tangentially at high velocity (C) Develops a helical motion inside the chamber (D) Both (B) and (C

Last Answer : (D) Both (B) and (C

The most efficient equipment for the removal of sub-micronic dust particles from blast furnace gas is the (A) Venturi atomiser (B) Gravity settling chamber (C) Electro-static precipitator (D) Cyclone separator

Description : The most efficient equipment for the removal of sub-micronic dust particles from blast furnace gas is the (A) Venturi atomiser (B) Gravity settling chamber (C) Electro-static precipitator (D) Cyclone separator

Last Answer : (C) Electro-static precipitator

Traces of liquid tar fog present in coke oven gas is separated using (A) Electrostatic precipitator (B) Cyclone separator (C) Strainer (D) None of these

Description : Traces of liquid tar fog present in coke oven gas is separated using (A) Electrostatic precipitator (B) Cyclone separator (C) Strainer (D) None of these

Last Answer : (A) Electrostatic precipitato

Which of the following is a batch sedimentation equipment? (A) Dust catcher (B) Filter thickener (C) Dry cyclone separator (D) Rotary sprayer scrubber

Description : Which of the following is a batch sedimentation equipment? (A) Dust catcher (B) Filter thickener (C) Dry cyclone separator (D) Rotary sprayer scrubber

Last Answer : (B) Filter thickener

Traces of tar fog present in the coke oven gas is removed by (A) Cyclone separator (B) Wet packed scrubber (C) Electrostatic precipitator (D) Washing with monoethanolamine

Description : Traces of tar fog present in the coke oven gas is removed by (A) Cyclone separator (B) Wet packed scrubber (C) Electrostatic precipitator (D) Washing with monoethanolamine

Last Answer : (C) Electrostatic precipitator

Operating principle of cyclone separator is based on the action of __________ dust particles. (A) Diffusion of (B) Centrifugal force on (C) Gravitational force on (D) Electrostatic force on

Description : Operating principle of cyclone separator is based on the action of __________ dust particles. (A) Diffusion of (B) Centrifugal force on (C) Gravitational force on (D) Electrostatic force on

Last Answer : (B) Centrifugal force on

Which of the following dust collection equipments is the least efficient (for sub-micronic particles)? (A) Dust catcher (gravity type) (B) Cyclone separator (C) Bag filter (D) Hollow wet scrubber

Description : Which of the following dust collection equipments is the least efficient (for sub-micronic particles)? (A) Dust catcher (gravity type) (B) Cyclone separator (C) Bag filter (D) Hollow wet scrubber

Last Answer : (A) Dust catcher (gravity type)

Most efficient and suitable dust removal equipment for removal of fly￾ash from flue gas in a thermal power plant is the (A) Gravity settling chamber (B) Cyclone separator (C) Electrostatic precipitator (D) Bag filter

Description : Most efficient and suitable dust removal equipment for removal of fly￾ash from flue gas in a thermal power plant is the (A) Gravity settling chamber (B) Cyclone separator (C) Electrostatic precipitator (D) Bag filter

Last Answer : (C) Electrostatic precipitator

Which of the following fine dust removal equipments is the most efficient? (A) Bag filter (B) Scrubber (C) Electrostatic precipitator (D) Cyclone separator

Description : Which of the following fine dust removal equipments is the most efficient? (A) Bag filter (B) Scrubber (C) Electrostatic precipitator (D) Cyclone separator

Last Answer : (C) Electrostatic precipitator

In a grinding operation, the limiting particle size is the size of the __________ particle in the sample. (A) Smallest (B) Largest (C) Either (A) or (B) (D) Neither (A) nor (B)

Description : In a grinding operation, the limiting particle size is the size of the __________ particle in the sample. (A) Smallest (B) Largest (C) Either (A) or (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

Write short note on i. Cyclone separator. ii. Fluidized bed dryer.

Description : Write short note on i. Cyclone separator. ii. Fluidized bed dryer. 

Last Answer : Cyclone Separator Principle: Centrifugal force Construction1) Cyclone separator is size separation device 2) It consists of a cylindrical vessel with a conical base. 3) The upper part of ... are produced 3) High friction between practices generate electrostatic charges. Diagram:  

Describe the principle, construction, working and uses of cyclone separator.

Description : Describe the principle, construction, working and uses of cyclone separator.

Last Answer : Principle: Centrifugal force   Construction-  1) Cyclone separator is size separation device 2) It consists of a cylindrical vessel with a conical base. 3) The upper part of the vessel is fitted ... the suspension of a solid in gas 2. It can be used with liquid suspension of solid

Explain the construction and working of cyclone separator.

Description : Explain the construction and working of cyclone separator.

Last Answer : Construction:   It consists of cylindrical vessel with a conical base. In upper part of vessel is fitted with a tangential inlet and fluid outlet. At the base it is fitted with solid outlet. ... solids are thrown out to the wall and fall to the conical base for discharge. Diagram

Explain construction and working of cyclone separator with a well labelled diagram.

Description : Explain construction and working of cyclone separator with a well labelled diagram.

Last Answer : Construction:   It consists of cylindrical vessel with a conical base. In upper part of vessel is fitted with a tangential inlet and fluid outlet. At the base it is fitted with solid outlet. ... solids are thrown out to the wall and fall to the conical base for discharge. Diagram  

Explain the working of cyclone separator with labelled diagram.

Description : Explain the working of cyclone separator with labelled diagram.

Last Answer : Cyclone separator: Working: Cyclone separators work much like a centrifuge, but with a continuous feed of dirty air. In a cyclone separator, dirty flue gas is fed into a chamber. The inside ... at the bottom of the container. The cleaned flue gas escapes out the top of the chamber.

__________ mill is not used for grinding wheat into flour and for milling of cereals & other vegetable products. (A) Buhrstone (B) Roller (C) Attrition (D) Pebble

Description : __________ mill is not used for grinding wheat into flour and for milling of cereals & other vegetable products. (A) Buhrstone (B) Roller (C) Attrition (D) Pebble

Last Answer : (D) Pebble

Pebble mills are tumbling mills widely used for grinding in the manufacture of paints & pigments and cosmetic industries, where iron contamination in the product is highly objectionable. Pebbles used in pebble mill are made of (A) Bronze (B) Stainless steel (C) Flint or porcelain (D) Concrete

Description : Pebble mills are tumbling mills widely used for grinding in the manufacture of paints & pigments and cosmetic industries, where iron contamination in the product is highly objectionable. Pebbles used in pebble mill are made of (A) Bronze (B) Stainless steel (C) Flint or porcelain (D) Concrete

Last Answer : (C) Flint or porcelain

Rod mills employed for grinding (A) Employ a steel shell having L/D ratio of 1.5 to 3.0 (B) Is useful for handling sticky materials (C) Employ steel rods of 2-12 cms diameter extending over full length of the mill (D) All 'a', 'b' & 'c'

Description : Rod mills employed for grinding (A) Employ a steel shell having L/D ratio of 1.5 to 3.0 (B) Is useful for handling sticky materials (C) Employ steel rods of 2-12 cms diameter extending over full length of the mill (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

In case of a revolving mill, wet grinding compared to dry grinding (A) Requires more energy (B) Has less capacity (C) Complicates handling & classification of the product (D) None of these

Description : In case of a revolving mill, wet grinding compared to dry grinding (A) Requires more energy (B) Has less capacity (C) Complicates handling & classification of the product (D) None of these

Last Answer : (D) None of these

The value of work index does not change materially from one equipment to another. If the value of work index determined for close circuit grinding is Wi, then the same for open circuit grinding will be (A) 0.5 Wi (B) Wi (C) 1.34 Wi (D) 3.34 Wi

Description : The value of work index does not change materially from one equipment to another. If the value of work index determined for close circuit grinding is Wi, then the same for open circuit grinding will be (A) 0.5 Wi (B) Wi (C) 1.34 Wi (D) 3.34 Wi

Last Answer : (C) 1.34 Wi

3. __________ mill is normally used for grinding of talc. (A) Tube (B) Compartment (C) Ring-roll (D) Pebble

Description : 3. __________ mill is normally used for grinding of talc. (A) Tube (B) Compartment (C) Ring-roll (D) Pebble

Last Answer : (A) Tube

A __________ mill is a revolving mill divided into two or more sections by perforated partitions in which preliminary grinding takes place at one end and the finishing grinding at the discharge end. (A) Compartment (B) Tube (C) Rod (D) Pebble

Description : A __________ mill is a revolving mill divided into two or more sections by perforated partitions in which preliminary grinding takes place at one end and the finishing grinding at the discharge end. (A) Compartment (B) Tube (C) Rod (D) Pebble

Last Answer : (A) Compartmen

Wet grinding in a revolving mill __________ as compared to dry grinding. (A) Gives less wear on chamber walls (B) Requires more energy (C) Increases capacity (D) Complicates handling of the product

Description : Wet grinding in a revolving mill __________ as compared to dry grinding. (A) Gives less wear on chamber walls (B) Requires more energy (C) Increases capacity (D) Complicates handling of the product

Last Answer : (C) Increases capacity

A fluid energy mill is used for (A) Cutting (B) Grinding (C) Ultra-grinding (D) Crushing

Description : A fluid energy mill is used for (A) Cutting (B) Grinding (C) Ultra-grinding (D) Crushing

Last Answer : (C) Ultra-grinding

A fluid energy mill is used for (A) Cutting (B) Grinding (C) Ultra grinding (D) Crushing

Description : A fluid energy mill is used for (A) Cutting (B) Grinding (C) Ultra grinding (D) Crushing

Last Answer : (C) Ultra grinding

Which of the following grinding mills has the horizontally arranged rods as the grinding elements thereby delivering more uniform granular products with minimum fines? (A) Compartment mill (B) Rod mill (C) Pebble mill (D) Tube mill

Description : Which of the following grinding mills has the horizontally arranged rods as the grinding elements thereby delivering more uniform granular products with minimum fines? (A) Compartment mill (B) Rod mill (C) Pebble mill (D) Tube mill

Last Answer : (B) Rod mill

Refractive index of a petrofuel which is the ratio of velocity of light in air to its velocity in the petrofuel gives an indication if its (A) Molecular weight (B) Aromatics content (C) Both ‘a’ & ‘b’ (D) Neither ‘a’ nor ‘b’

Description : Refractive index of a petrofuel which is the ratio of velocity of light in air to its velocity in the petrofuel gives an indication if its (A) Molecular weight (B) Aromatics content (C) Both ‘a’ & ‘b’ (D) Neither ‘a’ nor ‘b’

Last Answer : (C) Both ‘a’ & ‘b

Dry bulb temperature of unsaturated air is more than its __________ temperature. (A) Dew point (B) Wet bulb (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Description : Dry bulb temperature of unsaturated air is more than its __________ temperature. (A) Dew point (B) Wet bulb (C) Both 'a' & 'b' (D) Neither 'a' nor 'b

Last Answer : (C) Both 'a' & 'b

In a forced draft cooling tower, water is cooled from 95 to 80°F by exposure to air with a wet bulb temperature of 70°F. In this case, the (A) Range is 15°F (B) Approach is 10°F (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In a forced draft cooling tower, water is cooled from 95 to 80°F by exposure to air with a wet bulb temperature of 70°F. In this case, the (A) Range is 15°F (B) Approach is 10°F (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Use of natural draft cooling tower is practised, when the air has low (A) Humidity (B) Temperature (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Description : Use of natural draft cooling tower is practised, when the air has low (A) Humidity (B) Temperature (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Last Answer : (C) Both 'a' & 'b