The value of work index does not change materially from one equipment to another. If the value of work index determined for close circuit grinding is Wi, then the same for open circuit grinding will be (A) 0.5 Wi (B) Wi (C) 1.34 Wi (D) 3.34 Wi

The value of work index does not change materially from one equipment
to another. If the value of work index determined for close circuit grinding
is Wi, then the same for open circuit grinding will be
(A) 0.5 Wi
(B) Wi
(C) 1.34 Wi
(D) 3.34 Wi
by

1 Answer

Answer :

(C) 1.34 Wi
by

Related questions

Work index is the gross energy (kWh/tonne of feed) necessary to reduce a very large feed to such a size that 80% of product particles will pass through a 0.1 mm screen. The value of work index determined for wet grinding should be multiplied with __________ to get the same for dry grinding. (A) 1.0 (B) 0.5 (C) 1.34 (D) 4.34

Description : Work index is the gross energy (kWh/tonne of feed) necessary to reduce a very large feed to such a size that 80% of product particles will pass through a 0.1 mm screen. The value of work index determined for wet grinding should ... to get the same for dry grinding. (A) 1.0 (B) 0.5 (C) 1.34 (D) 4.34

Last Answer : (C) 1.34

Pick out the wrong statement. (A) Close circuit grinding is more economical than open circuit grinding (B) Cod oil, beef tallow or aluminium stearates are used as grinding aids in cement 'industries' (C) The equipment used for the removal of traces of solids from a liquid is called a classifier (D) Size enlargement is a mechanical operation exemplified by medicinal tablet making

Description : Pick out the wrong statement. (A) Close circuit grinding is more economical than open circuit grinding (B) Cod oil, beef tallow or aluminium stearates are used as grinding aids in cement ... is called a classifier (D) Size enlargement is a mechanical operation exemplified by medicinal tablet making

Last Answer : (C) The equipment used for the removal of traces of solids from a liquid is called a classifier

Close circuit grinding by a ball mill with air sweeping employs a (A) Classifier (B) Cyclone separator between mill & classifier (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Close circuit grinding by a ball mill with air sweeping employs a (A) Classifier (B) Cyclone separator between mill & classifier (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

In closed circuit grinding as compared to open circuit grinding, the (A) Specific surface of product is more (B) Product has lesser size uniformity (C) Production rate at a given limiting size is lower (D) Operation is economical

Description : In closed circuit grinding as compared to open circuit grinding, the (A) Specific surface of product is more (B) Product has lesser size uniformity (C) Production rate at a given limiting size is lower (D) Operation is economical

Last Answer : (D) Operation is economical

Grinding characteristic of a material is given by its (A) HGI (B) Angle of repose (C) Shatter index (D) Abrasion index

Description : Grinding characteristic of a material is given by its (A) HGI (B) Angle of repose (C) Shatter index (D) Abrasion index

Last Answer : (A) HGI

Grindability index of a coal is 100. It implies that the (A) Coal can be pulverised with great difficulty (B) Coal can't be pulverised (C) Coal can be easily pulverised (D) Power consumption in grinding the coal will be very high

Description : Grindability index of a coal is 100. It implies that the (A) Coal can be pulverised with great difficulty (B) Coal can't be pulverised (C) Coal can be easily pulverised (D) Power consumption in grinding the coal will be very high

Last Answer : (C) Coal can be easily pulverised

For grinding of cereals, grains, spices, pigments, saw dust, cork etc., the most extensively used size reduction equipment is a(A) Buhrstone mill(B) Ball mill(C) Crushing rolls(D) Hammer mill

Description : For grinding of cereals, grains, spices, pigments, saw dust, cork etc., the most extensively used size reduction equipment is a (A) Buhrstone mill (B) Ball mill (C) Crushing rolls (D) Hammer mill

Last Answer : (A) Buhrstone mill

The auditor's defense of contributory negligence is most likely to prevail when a. Third party injury has been minimal. b. The client is privately held as contrasted with a public company. c. Undetected errors have resulted in materially misleading financial statements. d. The auditor fails to detect fraud resulting from management override of the control structure

Description : The auditor's defense of contributory negligence is most likely to prevail when a. Third party injury has been minimal. b. The client is privately held as contrasted with a public company ... statements. d. The auditor fails to detect fraud resulting from management override of the control structure

Last Answer : The auditor fails to detect fraud resulting from management override of the control structure

An auditor obtains an understanding of the entity and its environment in order to a. Make constructive suggestions concerning improvements to the client's internal control. b. Understand the events and transactions that may have an effect on the client's financial statements. c. Evaluate whether the aggregation of known misstatements causes the financial statements taken as a whole to be materially misstated. d. Develop an attitude of professional skepticism concerning management's financial statement assertion

Description : An auditor obtains an understanding of the entity and its environment in order to a. Make constructive suggestions concerning improvements to the client's internal control. b. ... misstated. d. Develop an attitude of professional skepticism concerning management's financial statement assertion

Last Answer : Understand the events and transactions that may have an effect on the client's financial statements

Information risk refers to the risk that a. The client may not be able to remain in business. b. Errors and frauds would not be detected by the auditor's procedures. c. The auditor may express an unqualified opinion on financial statements that arematerial misstated.d. The client's financial statementsmay be materially false andmisleading

Description : Information risk refers to the risk that a. The client may not be able to remain in business. b. Errors and frauds would not be detected by the auditor's procedures. c. ... financial statements that arematerial misstated. d. The client's financial statements may be materially false and misleading

Last Answer : The client's financial statements may be materially false and misleading

The auditor's defense of contributory negligence is most likely to prevail when a. Third party injury has been minimal. b. The client is privately held as contrasted with a public company. c. Undetected errors have resulted in materially misleading financial statements. d. The auditor fails to detect fraud resulting from management override of the control structure.

Description : The auditor's defense of contributory negligence is most likely to prevail when a. Third party injury has been minimal. b. The client is privately held as contrasted with a public company. ... . d. The auditor fails to detect fraud resulting from management override of the control structure.

Last Answer : The auditor fails to detect fraud resulting from management override of the control structure.

Assurance engagement risk is the risk a. Of expressing an inappropriate conclusion when the subject matter information is not materially misstated. b. That the practitioner expresses an inappropriate conclusion when the subject matter information is materially misstated. c. Of expressing an inappropriate conclusion when the subject matter information is either materially misstated or not materially misstated. d. Through loss from litigation, adverse publicity, or other events arising in connection with a subject matter reported on

Description : Assurance engagement risk is the risk a. Of expressing an inappropriate conclusion when the subject matter information is not materially misstated. b. That the practitioner expresses an inappropriate ... , adverse publicity, or other events arising in connection with a subject matter reported on

Last Answer : That the practitioner expresses an inappropriate conclusion when the subject matter information is materially misstated.

This fundamental ethical principle prohibits association of professional accountants with reports, returns, communications and other information that contains materially false or misleading information or statements. a. Integrity b. Objectivity c. Professional competence and due care d. Professional behavior

Description : This fundamental ethical principle prohibits association of professional accountants with reports, returns, communications and other information that contains materially false or misleading information or statements ... b. Objectivity c. Professional competence and due care d. Professional behavior

Last Answer : Integrity

Chemical engineering plant cost index is used for finding the present cost of a particular chemical plant, if the cost of similar plant at some time in the past is known. The present cost of the plant = original cost × (index value at present/ index value at time original cost was obtained). The most major component of this cost index is (A) Fabricated equipment and machinery (B) Process instruments and control (C) Pumps and compressor (D) Electrical equipments and material

Description : Chemical engineering plant cost index is used for finding the present cost of a particular chemical plant, if the cost of similar plant at some time in the past is known. The present cost of ... (B) Process instruments and control (C) Pumps and compressor (D) Electrical equipments and material

Last Answer : (A) Fabricated equipment and machinery

A ground is indicated by the ground-detecting system on the main electrical switchboard. The FIRST step in locating the actual ground is to _____________. A. close all circuit breakers in the distribution panel until the ground detector indicates normal B. open the individual circuit breakers, one by one until the ground detection system indicates normal C. change over generators D. check each circuit with a megohmmeter

Description : A ground is indicated by the ground-detecting system on the main electrical switchboard. The FIRST step in locating the actual ground is to _____________. A. close all circuit breakers in ... ground detection system indicates normal C. change over generators D. check each circuit with a megohmmeter

Last Answer : Answer: B

The arrow drawn through the component shown in the illustration means that the device's value _____________. EL-0015 A. is fixed and cannot be changed B. is variable between two limits C. has yet to be determined for the circuit application D. is not allowed to change during circuit operation

Description : The arrow drawn through the component shown in the illustration means that the device's value _____________. EL-0015 A. is fixed and cannot be changed B. is variable between two limits C. has yet to be determined for the circuit application D. is not allowed to change during circuit operation

Last Answer : Answer: B

Before any work on electrical or electronic equipment is performed, which of the following precautions should be carried out? A. De-energize the applicable switchboard bus. B. Bypass the interlocks. C. Secure and tag the supply circuit breaker in the open position. D. Station a man at the circuit supply switch.

Description : Before any work on electrical or electronic equipment is performed, which of the following precautions should be carried out? A. De-energize the applicable switchboard bus. B. Bypass the interlocks. C. ... supply circuit breaker in the open position. D. Station a man at the circuit supply switch.

Last Answer : Answer: C

What is determined from open circuit test?

Description : What is determined from open circuit test?

Last Answer : Iron loss

Diesel index (an alternative index for expressing the quality of diesel) is (A) Determined by using a test engine (B) Not related to aniline point (C) Equal to cetane number plus 3 (D) All (A), (B) & (C)

Description : Diesel index (an alternative index for expressing the quality of diesel) is (A) Determined by using a test engine (B) Not related to aniline point (C) Equal to cetane number plus 3 (D) All (A), (B) & (C)

Last Answer : (C) Equal to cetane number plus 3

Rittinger's number designates the new surface created per unit mechanical energy absorbed by the material being crushed. Larger value of Rittinger's number of a material indicates its (A) Easier grindability (B) Poor grindability (C) High power consumption in grinding (D) None of these

Description : Rittinger's number designates the new surface created per unit mechanical energy absorbed by the material being crushed. Larger value of Rittinger's number of a material indicates its (A) Easier grindability (B) Poor grindability (C) High power consumption in grinding (D) None of these

Last Answer : (A) Easier grindability

As the product becomes finer, the energy required for grinding (A) Decreases (B) Increases (C) Is same as for coarser grinding (D) Is 1.5 times that for coarser grinding

Description : As the product becomes finer, the energy required for grinding (A) Decreases (B) Increases (C) Is same as for coarser grinding (D) Is 1.5 times that for coarser grinding

Last Answer : (B) Increases

Rod mills employed for grinding (A) Employ a steel shell having L/D ratio of 1.5 to 3.0 (B) Is useful for handling sticky materials (C) Employ steel rods of 2-12 cms diameter extending over full length of the mill (D) All 'a', 'b' & 'c'

Description : Rod mills employed for grinding (A) Employ a steel shell having L/D ratio of 1.5 to 3.0 (B) Is useful for handling sticky materials (C) Employ steel rods of 2-12 cms diameter extending over full length of the mill (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Work input to the air compressor with n as index of compression A. Increases with increase in value of n B. Decrease with increase in value of n C. remains same whatever the value of n D. first increase and then decreases with increase of value of n.

Description : Work input to the air compressor with n as index of compression A. Increases with increase in value of n B. Decrease with increase in value of n C. remains same whatever the value of n D. first increase and then decreases with increase of value of n.

Last Answer : ANSWER : A

What is the value of x in the equation 0.25 open brackets 3x - 4 close brackets - 0.5x equals 2.75 A. 27 B. 15 C. 7 D. 3?

Description : What is the value of x in the equation 0.25 open brackets 3x - 4 close brackets - 0.5x equals 2.75 A. 27 B. 15 C. 7 D. 3?

Last Answer : Work it through, doing the same thing to both sides:0.25(3x - 4) - 0.5x = 2.75[Multiply both sides by 4]→ 4 (0.25(3x - 4) - 0.5x) = 4 (2.75)→ 4 0.25(3x - 4) - 4 0.5x = 4 2.75→ 3x - 4 - 2x = ... 11[Add 4 to both sides]→ (x - 4) + 4 = (11) + 4→ x - 4 + 4 = 11 + 4→ x = 15→ Solution is B. 15

If spring index=2.5, what can be concluded about stresses in the wire? a) They are high b) They are negligible c) They are moderate d) Cannot be determined

Description : If spring index=2.5, what can be concluded about stresses in the wire? a) They are high b) They are negligible c) They are moderate d) Cannot be determined

Last Answer : a) They are high

The purpose of a magnetic relay is to _____________. A. open a circuit only in the event of overload B. remotely open and close contacts C. provide overcurrent protection during starting D. relay voltages at increased power

Description : The purpose of a magnetic relay is to _____________. A. open a circuit only in the event of overload B. remotely open and close contacts C. provide overcurrent protection during starting D. relay voltages at increased power

Last Answer : Answer: B

In 3 state gate third position termed as high impedance state which acts as. a. Open circuit b. — Close circuit c. None of these d. All of above

Description : In 3 state gate third position termed as high impedance state which acts as. a. Open circuit b. — Close circuit c. None of these d. All of above

Last Answer : a. Open circuit

If F is the fetch, the straight line distance of open water available in kilometres, the height of the wave in metres is (A) 0.15 (B) 0.20 (C) 0.28 (D) 0.34

Description : If F is the fetch, the straight line distance of open water available in kilometres, the height of the wave in metres is (A) 0.15 (B) 0.20 (C) 0.28 (D) 0.34

Last Answer : (D) 0.34

The resistance value of a resistor in a circuit can best be determined by the _____________. A. single solid body color of the resistor B. band markings on the resistor C. amperage value written on the resistor D. physical size of the resistor

Description : The resistance value of a resistor in a circuit can best be determined by the _____________. A. single solid body color of the resistor B. band markings on the resistor C. amperage value written on the resistor D. physical size of the resistor

Last Answer : Answer: B

Which of the following terms best describes the reason that light is refracted at different angles? ∙ A. Photon energy changes with wavelength ∙ B. Light is refracted as a function of surface smoothness ∙ C. The angle is determined partly by a and b ∙ D. The angle is determined by the index of the materials

Description : Which of the following terms best describes the reason that light is refracted at different angles? ∙ A. Photon energy changes with wavelength ∙ B. Light is refracted as a function of surface smoothness ∙ ... determined partly by a and b ∙ D. The angle is determined by the index of the materials

Last Answer : ∙ D. The angle is determined by the index of the materials

Which of the following is determined by an OTDR? ∙ a. Distance to trouble ∙ b. Length of fiber ∙ c. Refractive index ∙ d. All of these

Description : Which of the following is determined by an OTDR? ∙ a. Distance to trouble ∙ b. Length of fiber ∙ c. Refractive index ∙ d. All of these

Last Answer : d. All of these

A leaf spring consists of 3 extra full length leaves and 14 graduated length leaves. The maximum force that can act on the spring is 70kN and the distance between eyes of the spring is 1.2m. Width and thickness of the leaves are 100mm and 12mm respectively. Calculate the initial pre load required to close the nip. (a) 4332.2N (b) 4674.1N (c) 4985.4N (d) Can’t be determined

Description : A leaf spring consists of 3 extra full length leaves and 14 graduated length leaves. The maximum force that can act on the spring is 70kN and the distance between eyes of the spring is 1.2m. Width and thickness of the ... close the nip. (a) 4332.2N (b) 4674.1N (c) 4985.4N (d) Can't be determined

Last Answer : (b) 4674.1N

The degree of grinding of cement is called (a) Fineness (b) Soundness (c)Impact value (d) Bulking

Description : The degree of grinding of cement is called (a) Fineness (b) Soundness (c)Impact value (d) Bulking

Last Answer : (a) Fineness

Is your teeth grinding food a mechanical or chemical change?

Description : Is your teeth grinding food a mechanical or chemical change?

Last Answer : The teeth grinding is a mechanical change. The saliva mixing inwith the food and starting the digestive process would be achemical change.

As per Stevenson's empirical formula, the approximate value of the height of the wave in metres is given by (A) 0.34 VF (B) 0.5 VF (C) 1.5 VF (D) 3.4 VF

Description : As per Stevenson's empirical formula, the approximate value of the height of the wave in metres is given by (A) 0.34 VF (B) 0.5 VF (C) 1.5 VF (D) 3.4 VF

Last Answer : (A) 0.34 VF

In the illustrated circuit, what is the voltage measured across R1 if the battery is 24 volts, the resistance of R1 is 34 ohms, and the resistance of R2 is 126 ohms? EL-0036 A. 24 volts B. 18.9 volts C. 5.1 volts D. 150 millivolts

Description : In the illustrated circuit, what is the voltage measured across R1 if the battery is 24 volts, the resistance of R1 is 34 ohms, and the resistance of R2 is 126 ohms? EL-0036 A. 24 volts B. 18.9 volts C. 5.1 volts D. 150 millivolts

Last Answer : Answer: C

When a voltage of 95 VDC is applied to the circuit illustrated with a resistance of 17.8 ohms the current will be________. EL-0018 A. .187 amps B. 3.34 amps C. 5.34 amps D. 112.8m amps

Description : When a voltage of 95 VDC is applied to the circuit illustrated with a resistance of 17.8 ohms the current will be________. EL-0018 A. .187 amps B. 3.34 amps C. 5.34 amps D. 112.8m amps

Last Answer : Answer: C

Flash point of atmospheric distillation residue is determined by __________ apparatus. (A) Pensky-Martens (closed cup type) (B) Abel (C) Cleveland (open cup type) (D) None of these

Description : Flash point of atmospheric distillation residue is determined by __________ apparatus. (A) Pensky-Martens (closed cup type) (B) Abel (C) Cleveland (open cup type) (D) None of these

Last Answer : (C) Cleveland (open cup type)

Grinding efficiency of a ball mill is of the order of __________ percent. (A) 1-5 (B) 40-50 (C) 75-80 (D) 90-95

Description : Grinding efficiency of a ball mill is of the order of __________ percent. (A) 1-5 (B) 40-50 (C) 75-80 (D) 90-95

Last Answer : (A) 1-5

When a capacitor is connected in series with a Marconi antenna? A. Antenna open circuit stops transmission B. An inductor of equal value must be added C. No change occurs to antenna D. Antenna resonant frequency increases

Description : When a capacitor is connected in series with a Marconi antenna? A. Antenna open circuit stops transmission B. An inductor of equal value must be added C. No change occurs to antenna D. Antenna resonant frequency increases

Last Answer : D. Antenna resonant frequency increases

If the distance between two consecutive base pairs is 0.34 nm and the total number of base pairs of a DNA double helix in a typical mammalian cell is 6.6 × 109 bp, then the length of the DNA is approximately (a) 2.0 meters (b) 2.5 meters (c) 2.2 meters (d) 2.7 meters.

Description : If the distance between two consecutive base pairs is 0.34 nm and the total number of base pairs of a DNA double helix in a typical mammalian cell is 6.6 × 109 bp, then the length of the DNA is approximately (a) 2.0 meters (b) 2.5 meters (c) 2.2 meters (d) 2.7 meters.

Last Answer : (b) 2.5 meters

If the distance between two consecutive base pairs is 0.34 nm and the total number of base pairs of a DNA double helix in a typical mammalian cell is 6.6 × 109 bp, then the length of the DNA is approximately (a) 2.0 meters (b) 2.5 meters (c) 2.2 meters (d) 2.7 meters.

Description : If the distance between two consecutive base pairs is 0.34 nm and the total number of base pairs of a DNA double helix in a typical mammalian cell is 6.6 × 109 bp, then the length of the DNA is approximately (a) 2.0 meters (b) 2.5 meters (c) 2.2 meters (d) 2.7 meters.

Last Answer : (c) 2.2 meters

A car starts from rest and moves with constant acceleration. In first t seconds it covers distance x. Then distance covered by it in next t seconds wi

Description : A car starts from rest and moves with constant acceleration. In first t seconds it covers distance x. Then distance covered by it in next t seconds wi

Last Answer : A car starts from rest and moves with constant acceleration. In first t seconds it covers distance x. Then distance covered ... x B. 2 x C. 3 x D. 4 x

if seve times the curved surface area (A) of a cylinder is equal to 44 times the proudct of base radius (r) and height (h) then what si the formula wi

Description : if seve times the curved surface area (A) of a cylinder is equal to 44 times the proudct of base radius (r) and height (h) then what si the formula wi

Last Answer : if seve times the curved surface area (A) of a cylinder is equal to 44 times the proudct of base ... (h) then what si the formula with subject A?

Tap settings then Wi?

Description : Tap settings then Wi?

Last Answer : Tap settings then Wireless Networks

Pickup wrong definition 1) Off line - is a system peripheral equipment not controlled by CPU 2) Online - is system in which peripheral equipment is in direct contact with CPU 3) PL/I is the acronym Peripheral Listing /Index 4) Program or routine is a set sequence of instructions given to computer for problem solving

Description : Pickup wrong definition 1) Off line - is a system peripheral equipment not controlled by CPU 2) Online - is system in which peripheral equipment is in direct contact with CPU 3) PL/I is the ... /Index 4) Program or routine is a set sequence of instructions given to computer for problem solving

Last Answer : 3) PL/I is the acronym Peripheral Listing /Index

To the nearest rupee, what is the net present value of a replacement project whose cash flows are -Rs.104,000; Rs.34,444; Rs.39,877; Rs.25,000; and Rs.52,800 for years 0 through 4, respectively? The firm has decided to assume that the appropriate cost of capital is 10% and the appropriate risk-free rate is 6%. A. Rs.15,115 B. Rs.26,798 C. Rs.33,346 D. Rs.48,121

Description : To the nearest rupee, what is the net present value of a replacement project whose cash flows are -Rs.104,000; Rs.34,444; Rs.39,877; Rs.25,000; and Rs.52,800 for years 0 through 4, respectively? The firm has decided to ... -free rate is 6%. A. Rs.15,115 B. Rs.26,798 C. Rs.33,346 D. Rs.48,121

Last Answer : C. Rs.33,346