Explain the construction and working of cyclone separator.

Explain the construction and working of cyclone separator.
by

1 Answer

Answer :

Construction:  

It consists of cylindrical vessel with a conical base.

In upper part of vessel is fitted with a tangential inlet and fluid outlet.

At the base it is fitted with solid outlet.

Working:  

The suspension of solid in gas is introduced tangentially at a very high velocity.

The rotary movement takes place within the vessels.

The fluid is removed from the outlet at the top.

The rotatory flow within the cyclone separator causes the particle to be acted on by centrifugal force.

The solids are thrown out to the wall and fall to the conical base for discharge.

Diagram

image

by

Related questions

Explain construction and working of cyclone separator with a well labelled diagram.

Description : Explain construction and working of cyclone separator with a well labelled diagram.

Last Answer : Construction:   It consists of cylindrical vessel with a conical base. In upper part of vessel is fitted with a tangential inlet and fluid outlet. At the base it is fitted with solid outlet. ... solids are thrown out to the wall and fall to the conical base for discharge. Diagram  

Describe the principle, construction, working and uses of cyclone separator.

Description : Describe the principle, construction, working and uses of cyclone separator.

Last Answer : Principle: Centrifugal force   Construction-  1) Cyclone separator is size separation device 2) It consists of a cylindrical vessel with a conical base. 3) The upper part of the vessel is fitted ... the suspension of a solid in gas 2. It can be used with liquid suspension of solid

Explain the working of cyclone separator with labelled diagram.

Description : Explain the working of cyclone separator with labelled diagram.

Last Answer : Cyclone separator: Working: Cyclone separators work much like a centrifuge, but with a continuous feed of dirty air. In a cyclone separator, dirty flue gas is fed into a chamber. The inside ... at the bottom of the container. The cleaned flue gas escapes out the top of the chamber.

Explain construction and working of “Evaporation Still”

Description : Explain construction and working of “Evaporation Still”

Last Answer : Construction:  It consist of a hemispherical pan made from copper or stainless steel. It is surrounded by a steam jacket. Still is covered from top and connected to the ... liquid is evaporated and condensed into the condenser 4) The product is collected through product outlet.

Explain construction and working of filter candle.

Description : Explain construction and working of filter candle.

Last Answer : Construction: These are cylindrical candles with an opening, The opening is connected to vacuum pump for reducing pressure under it, durin filtration process. The candles are made up of ... thick wall of the candle & gets collected inside the candle from where it is removed. 

Explain the construction and working of ‘Meta Filter’.

Description : Explain the construction and working of ‘Meta Filter’.

Last Answer : Construction: i. It consists of grooved, drainage rod on which a number of metallic ring are packed. ii. The rings are usually of stainless steel and have 0.8 mm outer thickness, 15 mm inside ... pack of ring act as a base on which the fine filtration medium is supported Diagram: 

Explain the construction and working of silverson mixer homogenizer.

Description : Explain the construction and working of silverson mixer homogenizer. 

Last Answer : Construction It consists of emulsified head which is covered with fine meshed stainless steel sieve. The emulsifier head consist of a number of blades which rotates at a very high speed, to produce ... blades. So a fine emulsion is produced which is then expelled out. Diagram:

Explain the construction and working of filter press.

Description : Explain the construction and working of filter press.

Last Answer : Construction: It consists of alternative plate and frame mounted on two parallel support bars. The pressure can be applied through screw thread so that the plate and frame are rigidly fixed between ... Thickness of cake can be varied by using frame of different thickness. Diagram:

Explain construction and working of ball mill.

Description : Explain construction and working of ball mill.

Last Answer : Principle: Impact and Attrition. Construction: It consists of a hollow cylinder which is mounted on a metallic frame in such a way that it can be rotated on its longitudinal axis. The cylinder contains ... material is taken out and passed through a sieve to get powder of the required size. 

Explain the construction and working of triple roller mill.

Description : Explain the construction and working of triple roller mill.

Last Answer : Construction: It consists of 3 rollers. Rollers are made up of hard abrasion resistant material. Rollers are arranged very close to each other's. Rollers are rotated at different speed & in ... A Scraper is provided to remove the material from roller no.3 Diagram: 

Explain working,construction of filter leaf with neat diagram.

Description : Explain working,construction of filter leaf with neat diagram. 

Last Answer : Construction of filter leaf   It consists of metal frame enclosing a wire screen or a grooved plate. The screen is covered by filter cloth which is fitted in frame, to grip the cloth. The frame ... . The cake can be washed by immersing in a vessel containing water or reverse flow of air

Explain construction and working of Cutter mill or Hammer mill

Description : Explain construction and working of Cutter mill or Hammer mill

Last Answer : CONSTRUCTION: It consists of a hopper at top and metal casing enclosing two sets of knives i.e. stationary knives attached to stator and rotating are attached to rotor. The lower part of the casing consists ... are not fixed. The mill can produce coarse to moderately fine powder DIAGRAM:  

Describe construction and working of double cone blender.

Description : Describe construction and working of double cone blender.

Last Answer : Diagram: Construction: Double cone blender is made up of stainless steel and is available in different capacity ranging from 5 kg to 200 kg or even more. The efficiency of ... to produce shearing action and design is useful for mixing powders of different densities in small quantities.

Describe construction and working of equipment used for moist heat sterilization.

Description : Describe construction and working of equipment used for moist heat sterilization. 

Last Answer : Moist heat sterilizer or Autoclave:  Diagram:  Construction:  It consists of a string metallic chamber usually made of stainless steel. It has a cover fitted with a steam vent, pressure gauze ... whole of the steam is removed, the lid is opened and the sterilized material is taken out.

Describe the construction and working of evaporating pan with neat diagram.

Description : Describe the construction and working of evaporating pan with neat diagram.

Last Answer : Construction:  i. It consists of a hemispherical pan made from copper or stainless steel and surrounded by a steam jacket. ii. Hemispherical shape provides large surface area for evaporation. iii. ... . iv. After evaporation remove the product from product outlet. Diagram:

Write the principle, construction, working and uses of the disintegrator.

Description : Write the principle, construction, working and uses of the disintegrator.

Last Answer : Principle: The Disintegrator works on the principle of impact.  Construction:  The Disintegrator consists of steel drum having a shaft in the centre. The shaft contains a disc, on which four beaters are ... Use:   This mill is used to powder all types of drugs including very hard drugs.

Discuss the theory, construction, and working of freeze drying apparatus

Description : Discuss the theory, construction, and working of freeze drying apparatus

Last Answer : Theory: Freeze drying or sublimation drying consists of simply reducing the temperature & pressure to values below the triple point .(4.579mm of Hg& temp. of 0.0099 c) Under these ... . 5. Packing: Biological products are dried packed in aseptic condition immediately after drying.

Give principle construction and working of hammer mill with neat diagram.

Description : Give principle construction and working of hammer mill with neat diagram.

Last Answer : PRINCIPLE: Impact CONSTRUCTION: It consists of a stout metal casing enclosing to which four or more swinging hammer are attached. The lower part of the casing consists of a screen , through which ... are not fixed . The mill can produce coarse to moderately fine powder. DIAGRAM:

In the cyclone separator used for separation of dust from dust laden gas, the gas (A) Enters the cyclone from the top (B) Is admitted tangentially at high velocity (C) Develops a helical motion inside the chamber(D) Both (B) and (C

Description : In the cyclone separator used for separation of dust from dust laden gas, the gas (A) Enters the cyclone from the top (B) Is admitted tangentially at high velocity (C) Develops a helical motion inside the chamber (D) Both (B) and (C

Last Answer : (D) Both (B) and (C

The most efficient equipment for the removal of sub-micronic dust particles from blast furnace gas is the (A) Venturi atomiser (B) Gravity settling chamber (C) Electro-static precipitator (D) Cyclone separator

Description : The most efficient equipment for the removal of sub-micronic dust particles from blast furnace gas is the (A) Venturi atomiser (B) Gravity settling chamber (C) Electro-static precipitator (D) Cyclone separator

Last Answer : (C) Electro-static precipitator

Dust laden air can be purified using a (A) Cyclone separator (B) Bag filter (C) Gravity settler (D) Tubular centrifuge

Description : Dust laden air can be purified using a (A) Cyclone separator (B) Bag filter (C) Gravity settler (D) Tubular centrifuge

Last Answer : (A) Cyclone separator

Traces of liquid tar fog present in coke oven gas is separated using (A) Electrostatic precipitator (B) Cyclone separator (C) Strainer (D) None of these

Description : Traces of liquid tar fog present in coke oven gas is separated using (A) Electrostatic precipitator (B) Cyclone separator (C) Strainer (D) None of these

Last Answer : (A) Electrostatic precipitato

Which of the following is a batch sedimentation equipment? (A) Dust catcher (B) Filter thickener (C) Dry cyclone separator (D) Rotary sprayer scrubber

Description : Which of the following is a batch sedimentation equipment? (A) Dust catcher (B) Filter thickener (C) Dry cyclone separator (D) Rotary sprayer scrubber

Last Answer : (B) Filter thickener

Close circuit grinding by a ball mill with air sweeping employs a (A) Classifier (B) Cyclone separator between mill & classifier (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Close circuit grinding by a ball mill with air sweeping employs a (A) Classifier (B) Cyclone separator between mill & classifier (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

. The most suitable equipment for removing the fine dust particle (< 1 micron dia.) from air below its dew point will be a/an (A) Bag filter (B) Electrostatic precipitator (C) Cyclone separator (D) Wet scrubber

Description : . The most suitable equipment for removing the fine dust particle (< 1 micron dia.) from air below its dew point will be a/an (A) Bag filter (B) Electrostatic precipitator (C) Cyclone separator (D) Wet scrubber

Last Answer : (B) Electrostatic precipitator

Traces of tar fog present in the coke oven gas is removed by (A) Cyclone separator (B) Wet packed scrubber (C) Electrostatic precipitator (D) Washing with monoethanolamine

Description : Traces of tar fog present in the coke oven gas is removed by (A) Cyclone separator (B) Wet packed scrubber (C) Electrostatic precipitator (D) Washing with monoethanolamine

Last Answer : (C) Electrostatic precipitator

Operating principle of cyclone separator is based on the action of __________ dust particles. (A) Diffusion of (B) Centrifugal force on (C) Gravitational force on (D) Electrostatic force on

Description : Operating principle of cyclone separator is based on the action of __________ dust particles. (A) Diffusion of (B) Centrifugal force on (C) Gravitational force on (D) Electrostatic force on

Last Answer : (B) Centrifugal force on

Dust collection efficiency of a cyclone separator depends upon its (A) Diameter (B) Inlet gas velocity (C) Overall height (D) All (A), (B) & (C)

Description : Dust collection efficiency of a cyclone separator depends upon its (A) Diameter (B) Inlet gas velocity (C) Overall height (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Which of the following dust collection equipments is the least efficient (for sub-micronic particles)? (A) Dust catcher (gravity type) (B) Cyclone separator (C) Bag filter (D) Hollow wet scrubber

Description : Which of the following dust collection equipments is the least efficient (for sub-micronic particles)? (A) Dust catcher (gravity type) (B) Cyclone separator (C) Bag filter (D) Hollow wet scrubber

Last Answer : (A) Dust catcher (gravity type)

Most efficient and suitable dust removal equipment for removal of fly￾ash from flue gas in a thermal power plant is the (A) Gravity settling chamber (B) Cyclone separator (C) Electrostatic precipitator (D) Bag filter

Description : Most efficient and suitable dust removal equipment for removal of fly￾ash from flue gas in a thermal power plant is the (A) Gravity settling chamber (B) Cyclone separator (C) Electrostatic precipitator (D) Bag filter

Last Answer : (C) Electrostatic precipitator

Which of the following fine dust removal equipments is the most efficient? (A) Bag filter (B) Scrubber (C) Electrostatic precipitator (D) Cyclone separator

Description : Which of the following fine dust removal equipments is the most efficient? (A) Bag filter (B) Scrubber (C) Electrostatic precipitator (D) Cyclone separator

Last Answer : (C) Electrostatic precipitator

Hydro-cyclone is a (A) Crusher (B) wet classifier (C) Dry classifier (D) Magnetic separator

Description : Hydro-cyclone is a (A) Crusher (B) wet classifier (C) Dry classifier (D) Magnetic separator

Last Answer : (B) wet classifier

Write short note on i. Cyclone separator. ii. Fluidized bed dryer.

Description : Write short note on i. Cyclone separator. ii. Fluidized bed dryer. 

Last Answer : Cyclone Separator Principle: Centrifugal force Construction1) Cyclone separator is size separation device 2) It consists of a cylindrical vessel with a conical base. 3) The upper part of ... are produced 3) High friction between practices generate electrostatic charges. Diagram:  

Explain the principle and construction of Planetary Mixer.

Description : Explain the principle and construction of Planetary Mixer.

Last Answer : Principle :-  The planetary mixer consists of stationary vessel & anchor shape blade which has planetary motion. The anchor shape blade rotates on its axis & axis moves around . ... iv) The mixing shaft is driven by planetary gear connected to an electric meter. Diagram

Explain theory and construction of FBD.

Description : Explain theory and construction of FBD.

Last Answer : Theory of FBD: The equipment works on a principle of fluidization of the feed materials. In fluidization process, hot air is introduced at high pressure through a perforated bed of moist solid particulate. The wet solids ... from 5 kg to 200 kg with an average drying time of about 20-40 min.   

With a well labeled diagram explain the construction of Autoclave.

Description : With a well labeled diagram explain the construction of Autoclave.

Last Answer : Construction: It consists of a strong metallic chamber usually made of stainless steel.  It has a cover fitted with a steam vent, pressure gauze and a safety valve. Rubber gasket is ... inner chamber is place on the stand. The material to be sterilized is loosely packed into it.

Explain construction and application of tray dryer.

Description : Explain construction and application of tray dryer.

Last Answer : Construction of tray dryer.   The simplest form of dryer , the source of heat ( electric heater or steam coil) is at floor level & relies on natural convection. Therefore no efficient ... of crude drugs 2)For chemicals 3)For powders 4)For Granules used in tablet manufacturing 

Write construction and disadvantages of short tube evaporator.

Description : Write construction and disadvantages of short tube evaporator.

Last Answer : Construction:   It consists of number of tubes which are from 1 to 2 meters in length and from 40- 80 mm in diameter. About 1000 tubes are fitted in a vessel upto 2.5 meter or ... It is quite complicated and expensive in construction. 2. Difficult to clean. 3. Maintenance is costly.

Describe construction of autoclave with diagram.

Description : Describe construction of autoclave with diagram. 

Last Answer : Construction:   It consists of a string metallic chamber usually made of stainless steel. It has a cover fitted with a steam vent, pressure gauze and a safety valve. Rubber gasket is fitted on the inner side ... the stand. The material to be sterilized is loosely packed into it. Diagram:

Explain principle and working of fluid energy mill with a diagram.

Description : Explain principle and working of fluid energy mill with a diagram.

Last Answer : Principle  It works on the principle of impact and attrition. Working: The air or inert gas is introduced with a very high pressure through nozzles. Solids are introduced into air stream through inlet. ... 100 mesh and then passed through fluid energy mill. Diagram of fluid energy mill :

Differentiate between Evaporation and Distillation and explain the working and application of simple distillation.

Description : Differentiate between Evaporation and Distillation and explain the working and application of simple distillation.

Last Answer : Evaporation Distillation:  1. Free escape of vapors from the surface of liquid below its boiling point. Evaporation takes place even at room temperature 1) Process of ... Concentration of liquid and to separate non volatile solid from the volatile liquid such as alcohol and ether.

Explain the working, advantages and disadvantages of any one mill based on the principle of combined impact and attrition?

Description : Explain the working, advantages and disadvantages of any one mill based on the principle of combined impact and attrition?

Last Answer : which of the following mill works on the principle of combined impact and attrition

Explain with a neat sketch the working of the apparatus used for distillation on laboratory scale.

Description : Explain with a neat sketch the working of the apparatus used for distillation on laboratory scale. 

Last Answer : There are two apparatus used for distillation on laboratory scale. 1. Simple apparatus. 2. Still apparatus. Simple apparatus: Working: 1. Water is filled in the round bottom flask. ... level device is fitted in such a way that only heated water free from gases enters the boiler. 

Explain the working of ball mill with a well labeled diagram and give any two advantages

Description : Explain the working of ball mill with a well labeled diagram and give any two advantages

Last Answer : Working:   The drug to be ground is put into the cylinder of the mill and is rotated. The speed of the rotation is very different. At low speed, the mass of balls will slide or roll over each other ... for batch as well as continuous grinding vi)can be used for dry as well as wet grinding.

Explain working of fluid energy mill with a neat diagram.

Description : Explain working of fluid energy mill with a neat diagram.

Last Answer : Working:  1. The material which is to be size reduced is fed in the grinding chamber from the bottom through the feed inlet. 2. The air or inert gas is introduced with a very high pressure through ... particle size to the order of 100# and then passed through fluid energy mill. Diagram:   

Discuss working of ball mill with neat diagram.

Description : Discuss working of ball mill with neat diagram. 

Last Answer : Working: The drug to be ground is put into the cylinder of the mill and is rotated. The speed of the rotation is very different. At low speed, the mass of balls will slide or roll over each other and ... and passed through a sieve to get powder of the required size. Ball mill diagram:   

Give the principle and working of Fluidised bed dryer.

Description : Give the principle and working of Fluidised bed dryer.

Last Answer : Principle: In FBD, good contact between hot air and particles to be dried is obtained which cause rapid drying. Working of Fluidised bed dryer: Two types of FBD are used in pharmaceutical industry. There are ... ranging from 5 kg to 200 kg with an average drying time of about 20-40 min.

Give principal and working of silverson homogenizer with labelled diagram.

Description : Give principal and working of silverson homogenizer with labelled diagram.

Last Answer : Principal:   These work on the principal of braking large globules in to small globules by passing them under pressure through a narrow orifice. Working:   The emulsified head is placed in the vessel ... blades. So a fine emulsion is produced which is then expelled out. Diagram :

Draw a well labelled diagram of filter candle. Give its working and disadvantages.

Description : Draw a well labelled diagram of filter candle. Give its working and disadvantages.

Last Answer : Diagram : Working  : The filter candle is placed in a vessel containing the liquid to be filtered. When vacuum is applied, the pressure inside the candle is decreased. Due to ... Disadvantages   1. Chance of clogging/blocking. 2. Traces of material may come in the solution.

Write the working of filter press with well labelled diagram.

Description : Write the working of filter press with well labelled diagram.

Last Answer : Working:  1. The slurry is pumped in under positive pressure up to 20 bar and fill each frame. 2. The filtrate passes through the cloths on opposite sides of the frame and runs down between the ... 6. Thickness of cake can be varied by using frame of different thickness. Diagram: