Which of the following is not a cutting machine? (A) Dicers (B) Knife cutters (C) Slitters (D) Tube mills

Which of the following is not a cutting machine?
(A) Dicers
(B) Knife cutters
(C) Slitters
(D) Tube mills
by

1 Answer

Answer :

(D) Tube mills
by

Related questions

Colloid mills achieve size reduction mainly by (A) Impact (B) Attrition (C) Cutting (D) Compression

Description : Colloid mills achieve size reduction mainly by (A) Impact (B) Attrition (C) Cutting (D) Compression

Last Answer : (B) Attrition

Ball mills and tube mills with flint or porcelain balls are used for size reduction of (A) Asbestos (B) Rubber (C) Non-metallic ores (D) Limestone

Description : Ball mills and tube mills with flint or porcelain balls are used for size reduction of (A) Asbestos (B) Rubber (C) Non-metallic ores (D) Limestone

Last Answer : (C) Non-metallic ores

__________ mills fall in the category of tumbling mills, (A) Ball and pebble (B) Rod and tube (C) Compartment (D) All (A), (B) & (C

Description : __________ mills fall in the category of tumbling mills, (A) Ball and pebble (B) Rod and tube (C) Compartment (D) All (A), (B) & (C

Last Answer : (D) All (A), (B) & (C

Which of the following grinding mills has the horizontally arranged rods as the grinding elements thereby delivering more uniform granular products with minimum fines? (A) Compartment mill (B) Rod mill (C) Pebble mill (D) Tube mill

Description : Which of the following grinding mills has the horizontally arranged rods as the grinding elements thereby delivering more uniform granular products with minimum fines? (A) Compartment mill (B) Rod mill (C) Pebble mill (D) Tube mill

Last Answer : (B) Rod mill

If you are preparing a meal that will be cooked, would you worry about cutting your veggies with the same knife that you cut your meat with?

Description : If you are preparing a meal that will be cooked, would you worry about cutting your veggies with the same knife that you cut your meat with?

Last Answer : I don’t eat veggies so no. When I did I washed my knife constantly.

What tupe of knife is best for cutting steak?

Description : What tupe of knife is best for cutting steak?

Last Answer : Steak knives are the best way to cut a steak. Other sharp knives work but the steak knife is the easiest way to go. Steak knives come in different sets by different brands and can be found just about anywhere.

is part of the Cutter bar is shaped in Triangular shape with two cutting edges a) Knife head b) Knife back c) Grass board

Description : is part of the Cutter bar is shaped in Triangular shape with two cutting edges a) Knife head b) Knife back c) Grass board d) Knife Section

Last Answer :   <!-- [endif] -->Knife Section

How much money do expert fruit cutters make?

Description : How much money do expert fruit cutters make?

Last Answer : Glassdoor says about $32,000 USD per year in whatever location it thinks I'm in. Comparably only has a Los Angeles statistic for them and claims: Fruit Cutters make the most in Los Angeles at $66,371, ... in North Palm Beach, FL lists a Fruit Cutter job at $12 - $14 an hour with insurance/benefits.

How to get past razor wire, without wire cutters?

Description : How to get past razor wire, without wire cutters?

Last Answer : Is someone trying to confine you to your apartment?

Sharing nail-cutters/clippers is weird... isn't it?

Description : Sharing nail-cutters/clippers is weird... isn't it?

Last Answer : Nope…. I used the same ones as my boyfriend. I haven’t caught a disease.. yet.

How much do plasma cutters cost?

Description : How much do plasma cutters cost?

Last Answer : answer:My dad bought one when they first came out. It was about 15K. That was 1985 dollars. But now you can get one for about 1K. They are super cool. It was jaw-dropping what they could do when they came out compared to a oxy-fuel cutting torch.

Is it possible to make quality dried pasta with cookie cutters?

Description : Is it possible to make quality dried pasta with cookie cutters?

Last Answer : answer:Hmm, your difficulty in finding a recipe seems to be because it is not easily done: III - Thou Shalt Not Make Thine Own Dry Pasta In Italy, you have pasta fresca (fresh pasta) and ... pasta machines do a horrible job. Home-extruded pasta is an abomination before the culinary gods. Source

Are laser cutters dangerous?

Description : Are laser cutters dangerous?

Last Answer : The truth is that, like many things in life, laser cutting machines will pose a serious threat if and only if the necessary precautions are not taken before, during, and after operation. There are definitely ... to cut metal exclusively.This use was the norm for a number of years.Later on in the 197

What types of material are laser cutters used on?

Description : What types of material are laser cutters used on?

Last Answer : A laser cutter can be used to cut intricate patterns from paper, plastic or thin sheet metal.

How do plasma cutters work?

Description : How do plasma cutters work?

Last Answer : Plasma cutters work by shooting a high-pressure gas through a hose and arcing electricity through the gas to create plasma. Basically, plasma cutters used high temperature gas and electricity to cut through metals.

Bolt Cutters?

Description : Bolt Cutters?

Last Answer : form_title= Bolt Cutters form_header= Do all of your home improvements yourself with bolt cutters. What size bolt cutters do you need?*= () Small () Medium () Large Are you willing to buy used?*= () Yes () No What will you be cutting?*= _ [50]

Differential lock offers advantage of E. Threshing efficiency of thresher (power operated) F. Capacity of chaff cutters G. Cleaning capacity of straw walkers H. None of the above

Description : Differential lock offers advantage of E. Threshing efficiency of thresher (power operated) F. Capacity of chaff cutters G. Cleaning capacity of straw walkers H. None of the above

Last Answer : F. Capacity of chaff cutters

Don Evers tells his media buyer that due to the complexity of the firm's laser cutters he wants to focus exclusively on which one of the following media types? A)Radio B)Television C)Outdoor D)Broadcast E)Print

Description : DDon Evers tells his media buyer that due to the complexity of the firm's laser cutters he wants to focus exclusively on which one of the following media types? A)Radio B)Television C)Outdoor D)Broadcast E)Print

Last Answer : E)Print

Explain keyway milling process with standard milling cutters.

Description : Explain keyway milling process with standard milling cutters.

Last Answer : Keyway Milling Operation: This milling process produce keyway slot. The cutter use if thin size. This operation suited for long keyways. The position of the cutter is shown in figure. Standard ... and then the cut is taken. Woodruff key is produced by using a woodruff key slot cutter.

Why is a knife a simple machine?

Description : Why is a knife a simple machine?

Last Answer : A knife is actually a compound machine as it is both a wedge(the cutting edge) and a lever (as it is normally used in cuttingthings).

Surgical removal or cutting and ligation of the ends of oviduct or small part of the fallopian tube is removed or tied up is known as

Description : Surgical removal or cutting and ligation of the ends of oviduct or small part of the fallopian tube is removed or tied up is known as

Last Answer : Surgical removal or cutting and ligation of the ends of oviduct or small part of the fallopian ... tubectomy B. oviductomy C. castration D. vasectomy

In the method of tube boring of soil investigation, the following is essential: (A) A tube of about 2 metres length and 20 cm diameter with a cutting edge (B) A flap valve at the bottom of tube is provided to extract the soil sample (C) The tube is raised and lowered by 4 thick rope moving over a pulley suspended on a tripod stand (D) All the above

Description : In the method of tube boring of soil investigation, the following is essential: (A) A tube of about 2 metres length and 20 cm diameter with a cutting edge (B) A flap valve at the bottom of tube is ... and lowered by 4 thick rope moving over a pulley suspended on a tripod stand (D) All the above

Last Answer : Answer: Option D

Hollander beater' machine used in the paper manufacturing plant does not accomplish the task of (A) Final rolling out of paper (B) Cutting of fibres (C) Hydration of fibres (D) Fibrillation of fibre

Description : Hollander beater' machine used in the paper manufacturing plant does not accomplish the task of (A) Final rolling out of paper (B) Cutting of fibres (C) Hydration of fibres (D) Fibrillation of fibre

Last Answer : (A) Final rolling out of paper

__________ mills are termed as disintegrators.(A) Cage (B) Compartment (C) Pebble (D) All tumbling

Description : __________ mills are termed as disintegrators .(A) Cage (B) Compartment (C) Pebble (D) All tumbling

Last Answer : (A) Cage

__________ Centrifuge is normally used in sugar mills. (A) Tubular bowl (B) Disc-bowl (C) Suspended batch basket (D) Perforated horizontal basket continuous

Description : __________ Centrifuge is normally used in sugar mills. (A) Tubular bowl (B) Disc-bowl (C) Suspended batch basket (D) Perforated horizontal basket continuous

Last Answer : (C) Suspended batch basket

Colloidal mills are used for __________ grinding. (A) Coarse (B) Intermediate (C) Fine (D) Ultrafine

Description : Colloidal mills are used for __________ grinding. (A) Coarse (B) Intermediate (C) Fine (D) Ultrafine

Last Answer : (D) Ultrafine

Balls for ball mills are never made of (A) Forged/cast steel (B) Lead (C) Cast iron (D) Alloy steel

Description : Balls for ball mills are never made of (A) Forged/cast steel (B) Lead (C) Cast iron (D) Alloy steel

Last Answer : (B) Lead

Size reduction does not occur due to compression in case of (A) Rod mills (B) Gyratory crushers (C) Jaw crushers (D) Smooth roll crushers

Description : Size reduction does not occur due to compression in case of (A) Rod mills (B) Gyratory crushers (C) Jaw crushers (D) Smooth roll crushers

Last Answer : (A) Rod mills

Which of the following is not an ultrafine grinder (colloid mill)?(A) Micronizers (B) Agitated mills and fluid energy mills (C) Toothed roll crusher (D) Hammer mills with internal classification

Description : Which of the following is not an ultrafine grinder (colloid mill)? (A) Micronizers (B) Agitated mills and fluid energy mills (C) Toothed roll crusher (D) Hammer mills with internal classification

Last Answer : (C) Toothed roll crusher

Size reduction of the __________ can be suitably done by ball mills, crushing rolls and rod mills. (A) Metalliferous ores (B) Non-metallic ores (C) Basic slags (D) Asbestos & mica

Description : Size reduction of the __________ can be suitably done by ball mills, crushing rolls and rod mills. (A) Metalliferous ores (B) Non-metallic ores (C) Basic slags (D) Asbestos & mica

Last Answer : (A) Metalliferous ores

Pebble mills are tumbling mills widely used for grinding in the manufacture of paints & pigments and cosmetic industries, where iron contamination in the product is highly objectionable. Pebbles used in pebble mill are made of (A) Bronze (B) Stainless steel (C) Flint or porcelain (D) Concrete

Description : Pebble mills are tumbling mills widely used for grinding in the manufacture of paints & pigments and cosmetic industries, where iron contamination in the product is highly objectionable. Pebbles used in pebble mill are made of (A) Bronze (B) Stainless steel (C) Flint or porcelain (D) Concrete

Last Answer : (C) Flint or porcelain

_________ baffles are provided in ball mills. (A) Horizontal (B) No (C) Only two (D) None of these

Description : _________ baffles are provided in ball mills. (A) Horizontal (B) No (C) Only two (D) None of these

Last Answer : (A) Horizontal

Size reduction of asbestos and mica is done by (A) Hammer mills (B) Rod mills (C) Gyratory crushers (D) Crushing rolls

Description : Size reduction of asbestos and mica is done by (A) Hammer mills (B) Rod mills (C) Gyratory crushers (D) Crushing rolls

Last Answer : (A) Hammer mills

Rod mills employed for grinding (A) Employ a steel shell having L/D ratio of 1.5 to 3.0 (B) Is useful for handling sticky materials (C) Employ steel rods of 2-12 cms diameter extending over full length of the mill (D) All 'a', 'b' & 'c'

Description : Rod mills employed for grinding (A) Employ a steel shell having L/D ratio of 1.5 to 3.0 (B) Is useful for handling sticky materials (C) Employ steel rods of 2-12 cms diameter extending over full length of the mill (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

__________ mills are termed as impactors. (A) Hammer (B) Cage (C) Rolling-compression (D) None of these

Description : __________ mills are termed as impactors. (A) Hammer (B) Cage (C) Rolling-compression (D) None of these

Last Answer : (A) Hammer

Basic slag is not ground in (A) Jaw crushers (B) Ball mills

Description : Basic slag is not ground in (A) Jaw crushers (B) Ball mills

Last Answer : (A) Jaw crushers

Stamp mills are generally used for crushing (A) Iron ores (B) Gold ores (C) Talc (D) Diamond

Description : Stamp mills are generally used for crushing (A) Iron ores (B) Gold ores (C) Talc (D) Diamond

Last Answer : (B) Gold ores

Pick out the correct statement. (A) The capacity and the effectiveness of a screen are the same (B) The capacity and the effectiveness of screen are opposing factors (C) The screening surface of a 'reel' (a revolving screen used in flour mills) is made of silk bolting cloth supported by wire mesh (D) Both (B) and (C)

Description : Pick out the correct statement. (A) The capacity and the effectiveness of a screen are the same (B) The capacity and the effectiveness of screen are opposing factors (C) The screening surface of a 'reel' (a ... flour mills) is made of silk bolting cloth supported by wire mesh (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C

Actual operating speed of a ball mill may vary from 65 to 80% of the critical speed. Which of the following duties would require the ball mill to be operated at maximum percentage of critical speed? (A) Wet grinding in low viscous suspension (B) Wet grinding in high viscous suspension (C) Dry grinding of large particles (upto 1.25 cms) (D) Dry grinding of large particles in un-baffed mills

Description : Actual operating speed of a ball mill may vary from 65 to 80% of the critical speed. Which of the following duties would require the ball mill to be operated at maximum percentage of critical speed? (A) ... of large particles (upto 1.25 cms) (D) Dry grinding of large particles in un-baffed mills

Last Answer : (D) Dry grinding of large particles in un-baffed mills

Which of the following size reduction equipments employs mainly attrition for ultrafine grinding? (A) Jet mills (B) Fluid energy mill (C) Micronizer (D) All (A), (B) and (C)

Description : Which of the following size reduction equipments employs mainly attrition for ultrafine grinding? (A) Jet mills (B) Fluid energy mill (C) Micronizer (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

For efficient grinding, ball mills must be operated (A) At a speed less than the critical speed (B) At a speed more than the critical speed (C) At a speed equal to the critical speed (D) With minimum possible small balls

Description : For efficient grinding, ball mills must be operated (A) At a speed less than the critical speed (B) At a speed more than the critical speed (C) At a speed equal to the critical speed (D) With minimum possible small balls

Last Answer : (A) At a speed less than the critical speed

The material of construction of pressure mills used for squeezing out the juice from sugar cane is (A) Stainless steel (B) Cast iron (C) Mild steel (D) Monel

Description : The material of construction of pressure mills used for squeezing out the juice from sugar cane is (A) Stainless steel (B) Cast iron (C) Mild steel (D) Monel

Last Answer : (B) Cast iron

Pick out the correct statement. (A) Noise from ball mills can be dealt with by fibre glass lined enclosures (B) Noise from vibrating chutes can be reduced by lining the metallic chute with rubber (C) Noise of conveyor belt system is reduced by using urethane coated cloth conveyor belts and rubber/plastic covered metallic rollers (D) All (A), (B) & (C)

Description : Pick out the correct statement. (A) Noise from ball mills can be dealt with by fibre glass lined enclosures (B) Noise from vibrating chutes can be reduced by lining the metallic chute with rubber (C) Noise ... cloth conveyor belts and rubber/plastic covered metallic rollers (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Ethyl alcohol cannot be produced (A) From waste sulphite substrate of paper mills (B) By Esterification and hydrolysis of ethylene (C) From molasses (D) None of these

Description : Ethyl alcohol cannot be produced (A) From waste sulphite substrate of paper mills (B) By Esterification and hydrolysis of ethylene (C) From molasses (D) None of these

Last Answer : (D) None of these

What is the name of the glass cutting machine ?

Last Answer : A diamond pencil is usually used for cutting. This pencil is called glass cutter. With this pencil the glass is scratched and it is broken into two pieces by pressing. But I want to cut round glass things ... . You don't have to just cut the glass in hand. You also need to know some strategies.

Where can I buy a used metal cutting machine in the UK?

Description : Where can I buy a used metal cutting machine in the UK?

Last Answer : Answers is the place to go to get the answers you need and to ask the questions you want

Where can I buy a used metal cutting machine in the UK?

Description : Where can I buy a used metal cutting machine in the UK?

Last Answer : Answers is the place to go to get the answers you need and to ask the questions you want

Seating the brushes on a D.C. motor is first accomplished using ________________. A. a file for cutting the approximate curvature followed by sandpaper for the final fit B. sandpaper with the motor not operating and then a seating stone while running the machine C. emery paper for the initial cut and crocus cloth for the finishing cut D. course lapping compound, followed by a medium and then a fine grade

Description : Seating the brushes on a D.C. motor is first accomplished using ________________. A. a file for cutting the approximate curvature followed by sandpaper for the final fit B. sandpaper with the motor not ... for the finishing cut D. course lapping compound, followed by a medium and then a fine grade

Last Answer : Answer: B

In addition to undercutting the mica, proper maintenance of a D.C. motor's commutator includes _______________. A. side-cutting the copper segments and insulating the slots B. coating the copper surface with light machine oil for the first four hours of operation C. baking the armature in an oven at a maximum of 95°C for not over 8 hours D. all of the above

Description : In addition to undercutting the mica, proper maintenance of a D.C. motor's commutator includes _______________. A. side-cutting the copper segments and insulating the slots B. coating the copper surface with light machine ... in an oven at a maximum of 95°C for not over 8 hours D. all of the above

Last Answer : Answer: A