Octane number of gasoline produced by two stage fluidised catalytic cracking process is (A) 80 (B) 87 (C) 92 (D) 97

Octane number of gasoline produced by two stage fluidised catalytic
cracking process is
(A) 80
(B) 87
(C) 92
(D) 97
by

1 Answer

Answer :

(D) 97
by

Related questions

The octane number of aviation gasoline may be (A) 79 (B) 87 (C) 97 (D) > 100

Description : The octane number of aviation gasoline may be (A) 79 (B) 87 (C) 97 (D) > 100

Last Answer : (D) > 100

Straight run naphtha is converted into high octane number petrol (gasoline) by catalytic (A) Cracking (B) Polymerisation (C) Reforming (D) Isomerisation

Description : Straight run naphtha is converted into high octane number petrol (gasoline) by catalytic (A) Cracking (B) Polymerisation (C) Reforming (D) Isomerisation

Last Answer : (C) Reforming

Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given conversion (C) Percentage conversion increases with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Description : Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given ... with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In catalytic cracking, the (A) Gasoline obtained has a very low octane number (B) Pressure & temperature is very high (C) Gasoline obtained has very high aromatic content (D) Gasoline obtained has very high amount of gum forming compounds

Description : In catalytic cracking, the (A) Gasoline obtained has a very low octane number (B) Pressure & temperature is very high (C) Gasoline obtained has very high aromatic content (D) Gasoline obtained has very high amount of gum forming compounds

Last Answer : (C) Gasoline obtained has very high aromatic content

Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF, AlCl3 & H2SO4 as Catalysts (C) All the alkylation processes use very high temperature (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Description : Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF ... (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Last Answer : (C) All the alkylation processes use very high temperature (> 1000°C)

Thermofor catalytic cracking process is a __________ process. (A) Fixed bed (B) Moving bed (C) Fluidised bed (D) Non-catalytic

Description : Thermofor catalytic cracking process is a __________ process. (A) Fixed bed (B) Moving bed (C) Fluidised bed (D) Non-catalytic

Last Answer : (D) Non-catalytic

Which of the following is the most widely used cracking process in oil refineries? (A) Dubbs process (B) T.C.C. moving bed process (C) Fluidised bed catalytic cracking process (D) Houdry's fixed bed process

Description : Which of the following is the most widely used cracking process in oil refineries? (A) Dubbs process (B) T.C.C. moving bed process (C) Fluidised bed catalytic cracking process (D) Houdry's fixed bed process

Last Answer : (C) Fluidised bed catalytic cracking process

Though increased pressure has a retarding effect on cracking reaction, yet in actual process, a positive pressure of 10-15 kgf/cm2 is maintained during cracking mainly to (A) Increase the yield of light distillates (B) Suppress coke formation (C) Enhance the octane number of gasoline (D) Reduce gum content in gasoline

Description : Though increased pressure has a retarding effect on cracking reaction, yet in actual process, a positive pressure of 10-15 kgf/cm2 is maintained during cracking mainly to (A) Increase the yield of ... coke formation (C) Enhance the octane number of gasoline (D) Reduce gum content in gasoline

Last Answer : (B) Suppress coke formation

. Which of the following is used as a catalyst in fluidised bed catalytic cracking? (A) Silica-magnesia (B) Silica-alumina (C) Bentonite clays (D) All (A), (B) and (C

Description : . Which of the following is used as a catalyst in fluidised bed catalytic cracking? (A) Silica-magnesia (B) Silica-alumina (C) Bentonite clays (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro

Description : Catalytic cracking compared to thermal cracking of residue of vacuum distillation of crude oil (A) Gives higher yield of petrol (B) Lower octane number of petrol (C) Higher sulphur content in the product (D) Higher gum forming material in petro

Last Answer : (A) Gives higher yield of petrol

Octane numbers of motor gasoline used in India and America are respectively (A) 87 & 94 (B) 94 & 87 (C) 94 & 100 (D) 83 & 100

Description : Octane numbers of motor gasoline used in India and America are respectively (A) 87 & 94 (B) 94 & 87 (C) 94 & 100 (D) 83 & 100

Last Answer : (A) 87 & 94

Choose the correct statement regarding thermal cracking. (A) Moderate changes in operating temperature does not change the depth of cracking (B) Increased residence time results in the decreased severity of cracking (C) At low pressure, the yield of lighter hydrocarbons are more (D) Greater depth of cracking gives lower octane number gasoline

Description : Choose the correct statement regarding thermal cracking. (A) Moderate changes in operating temperature does not change the depth of cracking (B) Increased residence time results in the decreased ... of lighter hydrocarbons are more (D) Greater depth of cracking gives lower octane number gasoline

Last Answer : (D) Greater depth of cracking gives lower octane number gasoline

The catalytic cracking of heavier petroleum fraction is done to produce mainly (A) Gasoline (B) Asphalt (C) Diesel oil (D) Tar

Description : The catalytic cracking of heavier petroleum fraction is done to produce mainly (A) Gasoline (B) Asphalt (C) Diesel oil (D) Tar

Last Answer : (C) Diesel oil

Octane number (unleaded) of reformed gasoline may be upto (A) 60 (B) 70 (C) 80 (D) 90

Description : Octane number (unleaded) of reformed gasoline may be upto (A) 60 (B) 70 (C) 80 (D) 90

Last Answer : (D) 90

Petroleum coke is commercially produced by the __________ process. (A) Hydrocracking (B) Visbreaking (C) Fluid catalytic cracking (D) Delayed coking

Description : Petroleum coke is commercially produced by the __________ process. (A) Hydrocracking (B) Visbreaking (C) Fluid catalytic cracking (D) Delayed coking

Last Answer : (D) Delayed coking

Pick out the wrong statement. (A) Higher temperature is employed in visbreaking than in thermal cracking (B) Pyrolysis is a mild thermal cracking process (C) Lead susceptibility of petrol produced by catalytic process is more than that produced by thermal cracking (D) Operating pressure and temperature in thermal cracking process is more than that in catalytic cracking process

Description : Pick out the wrong statement. (A) Higher temperature is employed in visbreaking than in thermal cracking (B) Pyrolysis is a mild thermal cracking process (C) Lead susceptibility of ... Operating pressure and temperature in thermal cracking process is more than that in catalytic cracking process

Last Answer : (A) Higher temperature is employed in visbreaking than in thermal cracking (B) Pyrolysis is a mild thermal cracking process

Octane number (unleaded) of gasoline produced by isomerisation of butane may be about (A) 45 (B) 55 (C) 70 (D) 90

Description : Octane number (unleaded) of gasoline produced by isomerisation of butane may be about (A) 45 (B) 55 (C) 70 (D) 90

Last Answer : (C) 70

Methyl tertiary butyl ether (MTBE), a high octane (octane no. = 115) gasoline blending component is produced by the simple additive reaction of isobutylene with (A) Methyl alcohol (B) Ethyl alcohol (C) Methane (D) Ethane

Description : Methyl tertiary butyl ether (MTBE), a high octane (octane no. = 115) gasoline blending component is produced by the simple additive reaction of isobutylene with (A) Methyl alcohol (B) Ethyl alcohol (C) Methane (D) Ethane

Last Answer : (A) Methyl alcohol

The main use of heavy gas oil produced by the vacuum distillation unit is as a (A) Blending component for kerosene (B) Blending component for petrol (C) Feedstock for fluid catalytic cracking unit (D) None of these

Description : The main use of heavy gas oil produced by the vacuum distillation unit is as a (A) Blending component for kerosene (B) Blending component for petrol (C) Feedstock for fluid catalytic cracking unit (D) None of these

Last Answer : (C) Feedstock for fluid catalytic cracking unit

Commercially ethylene is produced from naphtha by (A) Catalytic cracking (B) Catalytic dehydrogenation (C) Pyrolysis (D) Hydrocracking

Description : Commercially ethylene is produced from naphtha by (A) Catalytic cracking (B) Catalytic dehydrogenation (C) Pyrolysis (D) Hydrocracking

Last Answer : (D) Hydrocracking

Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming process (C) The most ideal feedstock for thermal reforming is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene

Steam is throttled to 0.1 MPa with 20 degrees of superheat. (a) What is the quality of throttled steam if its pressure is 0.75 MPa (b) What is the enthalpy of the process?  a) 97.6%,2713 kJ/kg  b) -97.6%, 2713 kJ/kg  c) 87.6%,3713 kJ/kg  d) -87.6%, 3713 kJ/kg

Description : Steam is throttled to 0.1 MPa with 20 degrees of superheat. (a) What is the quality of throttled steam if its pressure is 0.75 MPa (b) What is the enthalpy of the process?  a) 97.6%,2713 kJ/kg  b) -97.6%, 2713 kJ/kg  c) 87.6%,3713 kJ/kg  d) -87.6%, 3713 kJ/kg

Last Answer : 97.6%,2713 kJ/kg

Which of the following will give maximum gas conversion? (A) Fixed bed reactor (B) Fluidised bed reactor (C) Semi-fluidised bed reactor (D) Plug-flow catalytic reactor

Description : Which of the following will give maximum gas conversion? (A) Fixed bed reactor (B) Fluidised bed reactor (C) Semi-fluidised bed reactor (D) Plug-flow catalytic reactor

Last Answer : (C) Semi-fluidised bed reactor

Visbreaking process is used mainly for making (A) High cetane diesel (B) High octane gasoline (C) Fuel oil (D) Smoke free kerosene

Description : Visbreaking process is used mainly for making (A) High cetane diesel (B) High octane gasoline (C) Fuel oil (D) Smoke free kerosene

Last Answer : (C) Fuel oil

In catalytic cracking process, olefins crack __________ times faster than in thermal cracking process. (A) 100 (B) 200-300 (C) 1000-10000 (D) 10

Description : In catalytic cracking process, olefins crack __________ times faster than in thermal cracking process. (A) 100 (B) 200-300 (C) 1000-10000 (D) 10

Last Answer : (C) 1000-10000

In petroleum refining, the process used for conversion of hydrocarbons to aromatics is (A) Catalytic cracking (B) Catalytic reforming (C) Hydrotreating (D) Alkylation

Description : In petroleum refining, the process used for conversion of hydrocarbons to aromatics is (A) Catalytic cracking (B) Catalytic reforming (C) Hydrotreating (D) Alkylation

Last Answer : (B) Catalytic reforming

From among the following, choose one which is not an exothermic process. (A) Methanol synthesis (B) Catalytic cracking (C) Ammonia synthesis (D) Oxidation of sulphu

Description : From among the following, choose one which is not an exothermic process. (A) Methanol synthesis (B) Catalytic cracking (C) Ammonia synthesis (D) Oxidation of sulphu

Last Answer : (B) Catalytic cracking

Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Description : Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive

Catalytic desulphurisation process used for sweetening of straight run gasoline and kerosene uses __________ as catalyst. (A) Bauxite (B) Fuller’s earth (C) Activated clay(D) All (A), (B) & (C)

Description : Catalytic desulphurisation process used for sweetening of straight run gasoline and kerosene uses __________ as catalyst. (A) Bauxite (B) Fuller’s earth (C) Activated clay (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

If Q is discharge is cubic metres per sec and D is the economical diameter of the pipe. According to Lea (A) D = 0.67 to 0.87 Q (B) D = 0.77 to 0.97 Q (C) D = 0.97 to 1.22 Q (D) D = 1.22 to 1.33 Q

Description : If Q is discharge is cubic metres per sec and D is the economical diameter of the pipe. According to Lea (A) D = 0.67 to 0.87 Q (B) D = 0.77 to 0.97 Q (C) D = 0.97 to 1.22 Q (D) D = 1.22 to 1.33 Q

Last Answer : (C) D = 0.97 to 1.22 Q

Is there really any reason to buy 89 octane gas over 87?

Description : Is there really any reason to buy 89 octane gas over 87?

Last Answer : answer:I heard from a potentially reliable source (50/50) that half of the time, the people who put the different grades of gas in the pumps don't even do it correctly. So, if you buy ... . Personally, I don't know anyone that's ever used anything but regular. Unless their car requires diesel.

Octane number of gasoline is a measure of its (A) Resistance to knock (B) Ignition delay (C) Ignition temperature (D) Smoke point

Description : Octane number of gasoline is a measure of its (A) Resistance to knock (B) Ignition delay (C) Ignition temperature (D) Smoke point

Last Answer : (A) Resistance to knock

The colour of gasoline is an indication of its (A) Octane number (B) Lead susceptibility (C) Gum forming tendency & thoroughness of refining (D) None of these

Description : The colour of gasoline is an indication of its (A) Octane number (B) Lead susceptibility (C) Gum forming tendency & thoroughness of refining (D) None of these

Last Answer : (C) Gum forming tendency & thoroughness of refining

__________ determination is not a very significant and important test for gasoline. (A) Gum & sulphur content (B) Viscosity (C) Octane number (D) Reid vapor pressure

Description : __________ determination is not a very significant and important test for gasoline. (A) Gum & sulphur content (B) Viscosity (C) Octane number (D) Reid vapor pressure

Last Answer : (B) Viscosity

Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Description : Paraffin base crude oil as compared to asphalt base crude gives (A) Higher yield of straight run gasoline (B) Higher octane number gasoline (C) Lower viscosity index lube oil (D) Poorer yield of lube oil

Last Answer : (A) Higher yield of straight run gasoline

Phenols are added in gasoline to (A) Improve the octane number(B) Act as an antioxidant(C) Reduce its viscosity(D) Increase its pour point

Description : Phenols are added in gasoline to (A) Improve the octane number (B) Act as an antioxidant (C) Reduce its viscosity (D) Increase its pour point

Last Answer : (B) Act as an antioxidant

Which of the following gasoline (unleaded) has the least octane number? (A) Catalytically cracked gasoline (B) Straight run gasoline (C) Catalytically reformed gasoline (D) Polymer gasoline

Description : Which of the following gasoline (unleaded) has the least octane number? (A) Catalytically cracked gasoline (B) Straight run gasoline (C) Catalytically reformed gasoline (D) Polymer gasoline

Last Answer : (B) Straight run gasoline

Higher pressure in the reforming reactor (A) Increases coke formation (B) Increases the rate of reaction(C) Produces high octane number gasoline(D) None of these

Description : Higher pressure in the reforming reactor (A) Increases coke formation (B) Increases the rate of reaction (C) Produces high octane number gasoline (D) None of these

Last Answer : (D) None of these

The amount of tetraethyl lead added to improve the octane number of motor gasoline is around __________ c.c per gallon of petrol. (A) 3 (B) 300 (C) 3000 (D) 1000

Description : The amount of tetraethyl lead added to improve the octane number of motor gasoline is around __________ c.c per gallon of petrol. (A) 3 (B) 300 (C) 3000 (D) 1000

Last Answer : (A) 3

Power alcohol as compared to straight run gasoline has lower (A) Calorific value (B) Octane number (C) Specific gravity (D) Viscosity

Description : Power alcohol as compared to straight run gasoline has lower (A) Calorific value (B) Octane number (C) Specific gravity (D) Viscosity

Last Answer : (A) Calorific value

What is 92.97 rounded to the nearest tenth?

Description : What is 92.97 rounded to the nearest tenth?

Last Answer : It is 93.0 to the nearest tenth and not 92.9

Find current density J when B = 50 x 10-6 units and area dS is 4 units. a) 9.94 b) 8.97 c) 7.92 d) 10.21

Description : Find current density J when B = 50 x 10-6 units and area dS is 4 units. a) 9.94 b) 8.97 c) 7.92 d) 10.21

Last Answer : b) 8.97

Find the median of the following observations: 46,64,87,41,58,77,35,90,55,92,33. If 92 is replaced by 99 and 41 by 43. find the new median -Maths 9th

Description : Find the median of the following observations: 46,64,87,41,58,77,35,90,55,92,33. If 92 is replaced by 99 and 41 by 43. find the new median -Maths 9th

Last Answer : Here's ur answer Hope it has helped u..

Find the median of the following observations: 46,64,87,41,58,77,35,90,55,92,33. If 92 is replaced by 99 and 41 by 43. find the new median -Maths 9th

Description : Find the median of the following observations: 46,64,87,41,58,77,35,90,55,92,33. If 92 is replaced by 99 and 41 by 43. find the new median -Maths 9th

Last Answer : Here's ur answer Hope it has helped u..

In any fuel, the percentage by volume of isooctane in a mixture of isooctane and n-heptane which will knock under same conditions as the fuel being tested, is called : (a) Cracking (b) Iodine number (c) Aromatization (d) Octane number

Description : In any fuel, the percentage by volume of isooctane in a mixture of isooctane and n-heptane which will knock under same conditions as the fuel being tested, is called : (a) Cracking (b) Iodine number (c) Aromatization (d) Octane number

Last Answer : Octane number

Tetra-ethyl lead is added in gasoline to (A) Increase its smoke point (B) Reduce gum formation(C) Reduce the pour point(D) Increase its octane numbe

Description : Tetra-ethyl lead is added in gasoline to (A) Increase its smoke point (B) Reduce gum formation (C) Reduce the pour point (D) Increase its octane numbe

Last Answer : (D) Increase its octane numbe

Catalyst used in the catalytic cracking is (A) Silica-alumina (B) Silica gel (C) Vanadium pentoxide (D) Nickel

Description : Catalyst used in the catalytic cracking is (A) Silica-alumina (B) Silica gel (C) Vanadium pentoxide (D) Nickel

Last Answer : (A) Silica-alumina

Name the endothermic reaction out of the following: (A) Catalytic cracking (B) Hydrocracking (C) Dehydrogeneration of Naphthene to produce aromatic (D) Catalytic polymerisation

Description : Name the endothermic reaction out of the following: (A) Catalytic cracking (B) Hydrocracking (C) Dehydrogeneration of Naphthene to produce aromatic (D) Catalytic polymerisation

Last Answer : (C) Dehydrogeneration of Naphthene to produce aromatic

Which of the following processes consumes hydrogen? (A) Fluid catalytic cracking (B) Visbreaking (C) Propane deasphalting (D) None of these

Description : Which of the following processes consumes hydrogen? (A) Fluid catalytic cracking (B) Visbreaking (C) Propane deasphalting (D) None of these

Last Answer : (A) Fluid catalytic cracking

Asphalts are(A) Low molecular weight & low boiling point compounds present in petroleum (B) Desirable in catalytic cracking feedstock, because they produce coke (C) Readily oxidisable and form carbonaceous sludge (D) All (A), (B) & (C)

Description : Asphalts are (A) Low molecular weight & low boiling point compounds present in petroleum (B) Desirable in catalytic cracking feedstock, because they produce coke (C) Readily oxidisable and form carbonaceous sludge (D) All (A), (B) & (C)

Last Answer : (C) Readily oxidisable and form carbonaceous sludge